60 second clips? Yeah you lost my money that defeats the purpose of being able to use the glasses for its main purpose… they need to update if they really want to sell these. Especially with 32gb of storage
I made up my mind to go for the action 4 but after waching this video idk anymore, because I just prefer the go pro video quallityover the action 4. But then again the action 4 has better quallity in the dark...
I hadn't seen the folding cage, but I have the L bracket on my a7iv and use that way more often than I did the full cage. Only problem is the L bracket doesn't have a spot for the top handle, but the full cage got in the way of the hot shoe and I couldn't use that for my ecm-m1 or other mics. Does the folding cage get in the way of the hot shoe?
Questions,: Is the battery and/or pump replaceable? What kind of accessories do they make for the Basic unit? Handpump to pressurize unit? Hot water attachments? Etc... I would prefer the manual system over the electronic system.. $150.00 bucks sounds a lot more reasonable.
Hi David, only just seen your channel now, I have a Mavic 2 Zoom drone, however it's now 6 years since I got it and its already giving me some RC disconnect issues and I'm not sure whether it's the RC or the drone, it's not the cable though, changed it have a new one but its still disconnecting and even if I don't go far it still disconnects and now because of this I'm thinking of retirng it, I will be going on a trip in two months time and I'm thinking of a new drone, I'm currently looking at either a Mavic mini 4 Pro or a bigger Air 3, so far the mini 4 Pro is making more sense to me as I have a holiday coming in about 4 months time. However I can't afford both. Decisions Decisions
The video limitation comes from saving the video on the onboard memory on the frames themselves.... hopefully, there will be an update that allows saving directly to your phone. Just my guess though.
Very cool...only concern in the long run are those screw on points/joints the vertical and horizontal positions do they lock in place and then you tighten it?...bc if it's only holding its position because of you tightening it..how strong are the screw on points? is there any play when you try to wiggle it? the vertical and horizontal postitions..eventually in the long term hopefully the screws hold up and be tight and not get looser later on? the vertical screw on point is the one holding all the weight of a setup especially like your example you put a top handle and then the rest of the rig all the weight is on that left side..
You're right they they lock into position with a really solid click and then you tighten the screw knobs. Once you have it tightened down, there's no wiggle in the system at all. I don't know what wizardry is going on in there, but it's solid!
@@DavidManningvlog oh awesome good to know!..thank you!..yeah this product is really interesting and definitely something to take into consideration for consumers who are into this type of stuff...
I think you can get Magsafe stick on rings on Amazon for Android phones. It's basically a metal ring that sticks to the back of your phone and then makes your phone compatible with all Magsafe setups. Let me see if I can find one!
if you want to wear them all the time just get clear lenses doesn’t matter if you don’t wear glasses it’s the future of Phones until Contact tech become disposable tech that is powered by external environment equipment in cities
That's a tough call. I have the A7IV (basically the A7Cii in a bigger body) and I still take the X100VI everywhere with me and only use the A7IV for filming on this channel or when I need to use longer lenses. If I could only have one of the two, I would take the A7Cii for the versatility, but owning both I use the X100VI like 90% of the time
@@DavidManningvlog thanks this is really helpful perspective! My use case is just getting better than iPhone pictures of my family while out and about. The main thing holding me back from the X100VI was the autofocus but it seems like it is working for you!
I think with the MagSafe mounts in general, the case that you use on your iPhone is significant! I use a Rokform case that is super strong on MagSafe mounts
@@DavidManningvlog I have Apple’s MagSafe clear case. And I’ve found it’s weak AF! I mount it to MagSafe car mount and it just slides off. So I’m wondering if this will be the same.
Falcam quick connects is legos for photographers 😂, I got them on all my cameras! The folding cage has me sold, been eyeing this since release. Awesome content as always David.
Thanks for the introduction to the latest Falcam parts! I wish the half-cage had F38 on the left side, which would be most convenient for taking panoramas with my F38 tripods.
What is that Tripod from 5:40? I might be blind(because I can't find it) but I remember seeing a video about that tripod on this channel as well. Do you have an affiliate link for that?
That's a Switchpod amzn.to/4e54jVa with an F38 ballhead on top which unfortunately I think they may have discontinued. Let me see if I can find it somewhere!
It looks like the ballhead can only be picked up when attacehd to this tripod. Pretty sure it screws off and you could put it on a switch pod though👍 www.ulanzi.com/collections/falcam-f38-quick-release-series/products/ulanzi-mt-46-quick-release-metal-tripod-2583?aff=628
I got a pair of these to replace my earbuds and have a convenient camera, and was stoked about it until I wore them and some people would ask me about the camera and seem to get uncomfortable in front of me. I didn’t think about it when I purchased them but now I feel like I’m stepping over some line of privacy even though I know I’m doing nothing wrong and don’t plan to. Just something to consider if you think you might want a pair, I’m not sure that ’ll keep wearing mine if this is becomes a constant issue, they work flawlessly though in terms of what I wanted them for.
bought one. the four small screws of the cradle will leave permanent marks on media mod case. not ideal. I ended up not using it at all since sliding GoPro out from media pod is not so easy with the squeeze from the cradle (but you have to squeeze it a little hard if you don't want media pod falling out while mounted on a moving vehicle.
Preaching to the choir !! I love this system and recently purchased two of the magnetic mounts, one for my desk on top of the cage and the other on my gimbal and I love them !! Plus my cage is the foldable one you showed as I don’t need anything else. So easy to remove and especially when I travel. You’ve basically shown my 2x favourite purchases in the last year :-)
Love hearing that Paul! I've been talking about Falcam for awhile now and every time anyone switches to the system, they're always so stoked! I've never had someone regret it, which shows how well designed this stuff is!
@@DavidManningvlog Couldn't agree more. I don't have any friends who are into videography or photography so I live for the channels I watch including yours specifically as you bring humour and you're clearly just a good guy! Falcam changed my whole life, I have never liked Arca Swiss and if you saw my Studio at home (only a little studio) every single thing I have has F22/F38 on it!! I didn't spot the 1/4 on the bottom of that sticker mount so thanks for that also, I just thought it was a mount to stick somewhere lol
ahhh I forgot one regret and an expensive one. The Falcam Gear Tree. I now have it in my garage and need to sell it. Just too many arms and I removed them one by one and just simplified my desk. GAS !!!
Oh, lord. These videos always cost me money. Here we go. . . okay, I'm safe. I am not on F38. I have too many large items like my 400 2.8 and 1DX bodies that I want on traditional Arca mounts and I want to keep all my mounting systems the same. I AM going to buy that original Ulanzi tripod, though, as soon as I sell one of my full-size models.
I'll get you Mark... you just wait... one day, when you least expect it, you'll be sitting in front of your computer late at night with many F38 items in your cart... you may hesitate... you may try to resist... but one day you'll press that checkout button and I'll have won! 🤣
