Thanks for the comparison. What model names were the rain gear?

If you do not put the cord through the outer cover do Not redo it. Simply remove the handle off other end the feed it through way way easier!!!

Thank you! This was helpful. I told myself about a hundred times to be sure to thread it through the cover. I did not thread it through the cover.

How often should this be done?

Balance?

You didn’t show where to attach by the handle. It’s kind of hard when the thing breaks and don’t know.

Where do you order the cable from? I just broke mines

How many hours or often does the oil get changed? What about air cleaner?

Ive had one for a year I'm surprised yours runs better than mine

I just did the method on a good sized nest and it worked. DO NOT HOLD A LIGHT SOURCE. Instead, put the flashlight elsewhere. I'm so glad that I changed plans though. I planned to hold the flashlight while spraying, but at the last minute I thought they would go straight for the flashlight so I put the flashlight about 25 feet from me pointing at the nest. If the nest was the center of a clock, I stood at 6 o'clock and the flashlight was at 3 o'clock so as not to blind me but direct the hornets away from me. I emptied the 3 cans I bought today plus the 4 cans that I didn't quite trust that I had on hand. Those hornets came out of that nest like a bat out of hell and went straight for the flashlight. Thank goodness I wasn't holding it. The hornets never found me, but man had I been holding that flashlight I would have been lit up.

Thanks for the video, just what I needed!

Hi what tupe of cord is this ao i can both one

Looking for that oil pan where ya go😊

Where you get the cable from.

Where can you buy the pull cord?

Where can you buy the pull cord?

Thank you. Made me feel like a man fixing it.

What is the plug next to the oil plug? On mine, it's a gray cap

Can anyone tell me what the gray cap is for next to the oil plug???

You offer no real clue about the most difficult part of the fix - reattaching the spring hook - as such I think this was a real waste of time video.

Thank you. Straight to the point. Thank God 🎉

it looked like one was sitting at top of hole on guard before you sprayed

I made the big mistake of adding too much oil to my mower Started spitting oil and white smoke out of the exhaust Of course I stopped immediately

Thanks Boss 🙏

What is the purpose of that small rectangle hole on front right side of mower body? Mine used to have a black cover, but it fell off.

What is the purpose of that small rectangle hole on front right side of mower body? Mine used to have a black cover, but it fell off.

Hey can you use fuel stabilizer in a lawn mower? I’m not confident in a carburetor cleaning, and with my motorcycle I’ve been running a shot of starbrite through the gas at the end of the season - as I was told it cleans it out some. I’m going to do an oil change, but then was thinking of adding a shot of stabilizer to the gas to run through it. We have a rider-size lawn that we use a push mower on, so yearly oil changes, but it still sounds like it’s struggling. Junk in the fuel line/carburetor is my guess, and was thinking maybe stabilizer could be a little cheat before having to do other stuff.

Word UP!!

Safety first, kid! Disconnect the spark before ever exposing or going near the blade.

good job dude ! Thx

Best video on this cable job

What is it with people beating the trimmer head to advance the line? Put the trimmer down, push the button, and pull the string out a couple notches by hand. It only takes a second instead of beating the shit out of a $400-$500 trimmer.

Very simple and helpful! Thanks

What is that free floating washer on the shaft of the gear box? I have that washer on my Toro too.

What ethanol level is regular

Get that kid outta here god damn😂

I replaced cable but when I push it stops and when I pull it goes .? But it was working ok just cable broke ,, help

Thanks. My rope broke this morning. A guy told me it would cost around $60.to fix. I found your video and fixed it my self. You saved me.$60 and waiting to get it fixed.

Nice video! Direct and to the point. Well done!

When I was a mechanic at a golf course, I had a manual suction device for all the equipment that had small engines. It worked great. It had a tank that held like a couple gallons. I forget now. But I realize no one would need such a thing for just one lawn mower. But it was such a great thing to have.

Thanks, this solved my problem!!! subbed!

Get a Fram 4967. Mobil 1 10W-30. Been done for 20 years on 17hp Kawasaki v twin. No oil burning and starts easy. 1700 hrs. Gave to my sister because I bought a zero turn.

Your "screen" idea is genius! It's going to work perfectly for my situation. Fun story: I discovered a groundhog hole while weed-wacking my back yard, but as I got close the ground hog's security team (ground wasps) stopped me. 😂😂

Absolute unit

Why do you have to kill the bees? They are all part of the ecosystem system. Just fence off the area and leave them alone. Simple!

Thanks for the video, the spring was really hard to replace. I ended up taking the 3 bolts off the side and was able to secure it. Funny thing is, when I push down on the handle, the rear wheels don't move, but if I pull up on it, the wheels move, so it's doing the opposite. I have no clue what happened. I put the spring on the same way it was on before.

Thank you so much for this video! My son is 22 and is usually in charge of mowing the lawn and the cords snapped! Didn’t know what to do and he doesn’t have an involved so this was phenomenal!!!❤

Sweaty boi! I wearFrogg Toggs in the rain on my motorcycle….keep me dry just fine!

Great job💯💯💯💯💯🔥

Duh!