Everyday fixes and DIYs: How do I do that? is a channel dedicated to everyday tasks. I enjoy saving money by doing a lot of random maintenance and household fixes myself. I've done the research and will show you how to do it. #AvantLink
Great job! Thanks for making the video! I have a rental property and have do the same thing ( I think)! I have a regular faucet, not a non-freeze type faucet! A guy sold me a female coupler where one end of the sharkbite goes on the pipe sticking out of the outside wall which has threads on the other end, then he sold me a faucet that will screw onto the screw end of the shark bite! I hope it works! Thanks again! Your friend, Barry
I thought you were going to drill a hole through the actuator arm and just run a nut and bolt through it with a couple fender washers. Not gonna lie I cringed when I saw the tape and zip tie “fix”. When you have to go in to repair it again try the nuts and bolts next time, you won’t have to repair it every year.
I just bought new radiator fans 1 week ago thinking because they weren't turning on, (which they were not), however literally the same thing happened to me. Car almost overheated in traffic. This may fix the problem.
thx mine stopped working ,so i did what you said and pressed the reset button , and the ice off button went off and now it works again for free ..... ty
Yo did not wait 1 hour before plugging in after you turned it on it's side. You didn't show where to find the serial number, model number, and module number.
Mine will not connect to any of my laptops, one of which is brand new and a very high spec! However it does connect to my iPhone. So not that impressed rerally.
Thanks for the video. It helped a lot because I bought a return grill and it didn’t have instructions. 1 advice it’s to use a tripod so you are not waving the video all over the place. It was hard at the beginning to see which piece went which way. I had to keep rewinding the video.
Tested the fan, it still runs. Replaced the relay and it still won’t turn on when it hits running temperature or ac running, Fan just never turns on ever. Switched out all fuses. Still can’t get the fan to turn on. Any ideas?
Is the air that comes out of the side of the exhaust supposed to be hot because my AC in my home quit and running this thing makes me think that it’s just heating up the house worse I’m trying to dehumidify the house while running a portable AC unit and this hot air is a concern
Great suggestion to go for the thinner part so the iron can heat it all the way through, I hadn't thought of that. I will tackle my curtains's blackout lining now.
Merci beaucoup j'ai fait exactement comme vous avez fait, et j'ai la même machine exactement la même marque le même modèle mais ,ça ne fonctionne pas à mon avis elle a peut-être un petit problème, je n'arrête pas de les remplir à la main
Good video. The only relay you mentioned does not have any metal heat sink fins, which is shown often for other years. For this year (2010) of Dodge Grand Caravan, is there only one relay as you show? Do you ever see when a relay seems to be working by using electric test meter, but does not seem to be working when installed in car?
The water reservoir is full, it slide out and you can dump it in your dump pit out a sink. If you have a hose connected, check to ensure the hose is flat and not arching upward.
In my case it's opposite... The high speed fan works good as per the coolant temperature but AC low speed don't come on when I turn on AC... And don't blow cool air when idle or stopped at signal
My dehumidifier broke today and I was looking for a new one and how to set up the hose. Wasn’t sure if there was a specific setting I needed to activate or if it did it all on it own. Thanks for the video!
Very helpful, thank you. I did notice a lot of melting water coming from the area around the chute. I removed the two screws and lifted gently. The raised area to the left of the chute had a block of ice under it! That was all before I found your video. Your video taught me how to take the top off and find the test button. I did have a lot of water in the tray from the melting, so I used a bulb baster to suction it out (saved a lot of time!) I am waiting now to see if it works.
Same thing happened to my 2013 Cruze SW. Drilled a 4mm hole in the middle of the nut, shoved a bolt in between, self locking nut and some grease, works perfectly and doesn't come off
Unless you regularly get more than 6 inches of snow at a time you deal with just a single stage snow thrower. If you get large amounts of snow then a two stage may be worth your investment. If you just have a small pathway and short driveway with less than 6 inches, a shovel may still be your best deal.
