I just got a r12 and crp pedals with a wheel stand... Now I've opened up the gates to go full rig and 3 monitors, this was super helpful. Quick question - are you using 3 dp/HDMI cables connected to your GPU or is there a hub that makes it 3 into 1?
Congratulations on your new obsession, I am glad I could be a part in enabling you 😂💪🏻 Good question. You need a GPU that has 3 separate inputs. You cannot combine them in a splitter as they need to send 3 separate signals. Hope this helps and good luck soldier 🫡
You wouldn't be able to correct for the angles but you could just run it as an ultra wide display of sorts. Just follow the instructions for setting up with NIVIDIA and then that should sort you out 👍🏻
I used to play Automobilista 3 or 4 years ago on Vr and that looked way better than this. EA need to get their sh** together and do a reasonable job at least. Hope there isn't a monopoly for F1 official game.
AMS2 is outstanding in VR. I would definitely recommend a revisit. EA have not made any significant advancements here in years. The lack of triple support is embarrassing. I hope the F1 license goes to someone else so they can do it justice. Although I fear EA have very deep pockets.
Missed the live stream unfortunately 😢 Nevertheless good to see you back on a stream doctor. Probably squeezed one in between work and study for some much needed relaxation 👌🏻
Not to worry mate, although I did miss you 😢😅 Was a good bit of fun, I really enjoyed it. You are right, I think if I can work these in between revision breaks it will be good for me 💪🏻
Hairloss sucks. Lost most of my hair after a very traumatic time in my late 20s. There is another alternative you happened to almost have missed, option #4. Provided that the shape of your head does not resemble Shrek's boulder, you can shave your head and grow a goatie. Worked out very well for me and looks quite bad ass (or so I've been told 😬). That being said, good luck with your yourney, hope it works out really well and that all your expectations are met. 👍🏻👍🏻👍🏻
Thank you for sharing this 🙏🏻 I am sorry you went through such a traumatic time, must have taken a toll if it accelerated hair loss through stress. I might have to try the goatee look when I need to shave it off in November 😂 Although I am attached to my beard right now 😅 Thank you for your kind words and support 🙏🏻
If you don't mind me asking? How many grafts are you having and how much is it costing you? I have similar hair loss to you mainly on the crown and considering it myself. Thanks
Regardless of being exactly realistic. What can I change in the calculation to give a higher fov. I’ve changed size of screen and distance and it doesn’t change much. Pls help I’ve just tried distance on its own. Whatever figures I put in calculation, it comes out exactly the same. Is there a step missing I’m not thinking of? Do I need to change the configuration bit to 4 again to make amendments or can I just go straight into the multi mon file and then click save?
Thanks for sharing. I had no idea this was possible. I will keep it in mind if I ever go bald or share it with someone I know that is looking for options. Hope the op goes well.
Well good luck Scott! As a card carrying member of the Jean-Luc society I support your decision and will cheer you on! My own pattern of loss is not so much a pattern, but sheer dominance of chrome dome. I do manage some righteous ear and eyebrow hair so I feel like if popular culture can get behind these areas I will be golden. 😂
Thank you very much Dylan! The difference here is that very much like the eminent Picard, you look great with it 💪🏻🖖🏻 Let the ear hair reign supreme! 😂 If anyone doesn't believe me reading this, please see evidence linked 👉🏻 ru-vid.comsXgY818St6Q?si=n8KhfRXx6dNERsZq Thank you for your support buddy and for your kind comment 🙏🏻
Can’t wait to see the video on the surgery. I shave my head every few days because I have bald patches and my hair line decided to recede on one side and not the other. Transplant isn’t for me since I’m old, married and can’t afford one anyways.
Glad you are looking forward to it buddy! Thank you for following the journey💪🏻 When I interview Dr. Ted I will be covering things like the upper and lower age limits for transplantation, so hopefully I can shed some light on it. All a new world for me. Nothing wrong with going full Jason Statham 🪒💪🏻
Great video mate and thanks for sharing. I'm sure it will be extremely cool to see the surgery and follow you in your journey to a luscious head of hair. Looking forward to it. Let your personal 80ties begin 😉
Thanks for the support buddy 🙏🏻 It's going to be really exciting to film! Should be something new for the channel 😅 The luscious head of hair is a long way off, but the journey begins today 💪🏻😅 Thanks for following the journey mate 🙏🏻
Thanks a lot Barry and also for sharing 🙏🏻 I think it is something many of us go through, but hate talking about. I know I didn't like it very much. I hope by talking about it some of that stigma can be alleviated a bit.
I am squeamish af so I will not be watching the surgery video 😂. I even had to leave the antinatal sessions when they started talking about epidurals as I was close to fainting.
It shouldn't be too bad at all as far as surgeries go 😅😷 Although if you had to leave during a discussion about epidurals, the video could be an interesting endurance test for you 👀😂 Just sit on the rig so you can pass out comfortably 😇😅
Hi TTR, I tried that tutorial but for me the righrt Monitor looks a lil bit misaligned, I think I have to change the angle a lil bit but cant find any way to change the angle via config or multimon config.
I am afraid if the angles are not correct or it looks misaligned you have made a mistake either measuring your monitors or with the calculation itself. I would advise running everything again, making sure to follow the video in its entirety.
This update for the update is now 2 weeks ago and you yourself said it's only weeks away. And I said and you agreed he shouldn't have announced it would come at the end of summer and he also said he would beat that by a fair margin. And now it looks like after seeing the ams 2 discord that it's possibly a couple of months away. He just can't seem to stop himself. It's like the nvidia hype train. In a nutshell Renato don't announce anything till its ready No maybe No it should be's. Just release when ready.
Although I appreciate the disgruntlement. I think it's just best to take it as it comes. On the plus side it is nice to have something to be hyped about. If they have to cook things for a little longer, then so be it. I personally shall be looking forward to the final update on the v1.6 update 😅 Whenever that may be 👀
IMPORTANT BEGINNER HEEL TOE TIP!instead of twisting your whole foot over put your toes on the right edge of the brake pedal and roll your foot towards the throttle and almost hit the throttle with the side of the edge of your foot and not so much the bottom of your foot.
Multiple ways to skin a cat and ultimately some pedal set ups don't allow what you have described. There is limited adjustability with the V3 inverted and I found it not possible to do what you describe with this set, hence what was shown. However, each to their own and everyones anatomy is different. Ross Bentley explains this very well 👉🏻 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K5Y2wb9ENR0.html
Hey, geniuine question. I have one 31" monitor in the middle, and 2 x 23" on vertical on each side. When I try to do as you did, the vertical screen are hardset on horizontal and I cant change that. Is it possible to achieve this somehow?
There is a way to do this although personally I would opt for either buying a third 23" or 2 more 31" screens. You will get a much better result. However, I do believe someone in this comments section has posted the solution to your problem.
Nvidia Surround only supports 60hz with triple 4k and doesn't support HDR sadly. It looks like the feature has been pretty much abandoned. I don't get why Forza Motorsport can't have the same multi-display functionality that MS flight Sim 2020 has that works so well.
Already bought 2 of the shifters. Excited for them to arrive. Logitechs Customer Service is top notch as well....had a G923 stop working on me and all i had to do was call up tech support and they had me send it back and they replaced it no questions asked
I thought that would be the ideal scenario. Going to hit up some rally by any chance? 👀 That is really good to hear about their customer service, it sounds like you have had a really positive experience with them. Please report back how you get on with them. I would be interested to know 💪🏻
I have never had any issues with Corsair and have only had a positive experience personally. I agree with you, I feel this is good news and hopefully puts Fanatec in a positive trajectory.
Every company that Corsair took over had worse products and customer service then before, it's easy to acknowledge what is obviously wrong with Fanatec and say that they are going to solve those issues, but they probably wont. They also blatently stole the patents from Fanatec prior to stealing the whole company from its owner and shareholders... If you think this is great news, I think you are wrong!
I thought they did okay with Elgato and that product line appears to be flourishing? Which product lines are you referring to? I agree with you that the way the company was acquired was not the best way to do it and most certainly does not inspire confidence moving forward. I really hope they prove us wrong but at present they are saying all the right things.
@@TraumaTeamRacing I don't really have any hands-on experience with Elgato or Scuf, the only thing I can say about it is that there does not seem to be any further development in their products, plus that they and Corsair have a horrible warranty reputation according to what you see on the internet and RU-vid. It seems to me that Corsair milks the products from the companies they acquire and lowers their quality without any further innovations for maximum profit. I fail to see how Corsair would be better at solving the issues that plague the Fanatec steering wheels with disconnecting and such than a company that has about 30 years of experience. It's as you say that it's on them to prove themselves, but looking at their track record and the way they 'stole' the company, I don't have a good feeling about it. If they steal at such a high level, what's holding them from 'stealing' from us, the customers? Fanatec was pretty chill with their RMA's, but I suspect it won't be for long anymore... That the distribution problems would be solved, I do believe.
I am pretty sure Elgato have been releasing stuff pretty steadily? The Stream Deck Studio for one. There is a guy in this comments that reported a pretty good customer experience? Sometimes the internet can be a negativity echo chamber. I think it is important to note that Fanatec are still being run by mostly the same staff. Whether Corsair has any direct innovation will have to be seen. I don't think the issue is Corsair with regards the 'stealing' comment. The issue would be more with those in senior positions at Fanatec that were responsible for instigating it.
Hey there, creator of the ATS/ETS2 FOV calculator here. As some other commenters have pointed out, the multimon mode setting is very important. Setting it to 4 will use the multimon_config.sii file, while setting it to 2 will use the multimon options within the config.cfg file. So if set to 2, you're using a default triple monitor preset. If set to 4, you're using what you calculated from my calculator. The default preset is fine if you don't need an accurate FOV, but you need the calculated values for a mathematically correct view. Also, there should be no need for that other FOV calculator, all the inputs in my calculator are just measurements. Perhaps it could be helpful if you have a desired FOV, but otherwise it just overcomplicates things. However, I have a newer version of the calculator with many more features, including setting a desired FOV. I recommend linking to that one instead, and having a read through my written guides on the roextended forum. If you'd like to make a corrected video, I'd be happy to work with you, just let me know.