$40 AliExpress "MAGNUM" motors? | Surpass Hobby 540Plus V2 brushed Crawler Motor Review

Подписаться 1,4 тыс.

Просмотров 9 тыс.

50% 1

Came across some of these Holmes crawlmaster magnum clones on AliExpress and thought I'd try them out. It runs alright, a bit warm and obviously not as smooth as even a crawlmaster pro, also has some problems with QC. However, they pack a surprising amount of torque for a standard 540 sized can. For around 40USD shipped, its not actually too bad of a deal.
Here's where I got them:
SURPASS HOBBY 540PLUS V2 11T 13T 16T 20T Brushed Motor
a.aliexpress.com/_mLTtpCr

Наука

Опубликовано:

17 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@ametykathy 2 года назад

Nice motor ! 👌

@ryanbrockmiller1648 2 года назад

I have the surpass 80a esc and 550 5 slot 10 turn motor. I really like the set up especially for how cheap it is.

@MangoJim90 2 года назад

I wonder if it will be any benefits of using it on 10 scale axle monster truck?) At the moment I use 550 can 12t motor....feels nice :)) Thanks for video!!

@shadow7796 2 года назад

I run the 11t Crawlmaster Magnum 540. I have personally not seen or used a better quality or smoother motor. The brake is insanely strong and it is extremely slow. I run 3s and it has never been hot. And yes, it is stupidly expensive (175$). But it's every bit as controllable as my 3300kv Axe system. But I still wouldn't mind trying one of those on the new build I have underway.

@CRCG_00 2 года назад

Yeah I could imagine the magnum would be a dream to drive, I still can't justify the price yet, for now... XD I've heard good things about the AXE, especially the V2. I think that'll probably be my next purchase!

@shadow7796 2 года назад

@@CRCG_00 it's a pretty awesome combo to be sure. Easy to program to. I haven't had a single issue with mine. I got the 550 cause my rig is fairly heavy. You can't go wrong with one.

@themountain59 2 года назад

@@shadow7796 you have a Magnum 550 ?? were did you get those ??

@CRCG_00 2 года назад

@@themountain59 the 550 was refering to the AXE I think. i would love too see a 550 magnum though, jsut imagine the amout of torque that would have.

@jerrymccreary4081 Год назад

What esc did you change out, what was the one you put in after the 1080 and which performed better

@CRCG_00 Год назад

The esc that I swapped in was a Holmes BRXL. Performance wise there is no real tangible difference, infact the 1080 runs much quieter. The only reason I changed over to the Holmes is that it just offers a bit more tuning and also datalogging, I did it just out of curiosity and for experimentation purposes.

@modelarcio1 Год назад

How does the engine work after a year of use? are you going to make a video about it again?

@themountain59 2 года назад

What is your experience with this particular JX servo? BTW..the diameter is 28mm , not 20mm ;)

@CRCG_00 2 года назад

Thanks, The jx servo is ok. It respectable and affordable but just not quite as strong. slow crawling is fine but anything faster like trail bashing or bouncing, I began to run into durability issues.

@user-ru5xq3er6s 2 года назад

Hi, what is the diameter of the comm? Thanks!

@rchobbies4479 2 года назад

I installed my kit, does the quality of the radio influence the result?

@CRCG_00 2 года назад

To an extent yes, but modern 2.4ghz radio are all pretty good even a cheap flysky won't really have a negative effect motor control

@rchobbies4479 2 года назад

@@CRCG_00 I didn't get as smooth as yours, hobbywing 1080 20T engine

@CRCG_00 2 года назад

@@rchobbies4479 your gearing might be higher? you can also try messing with the Expo on your radio if it has the options to get lower/ less sensitive input on start up.

@rchobbies4479 2 года назад

@@CRCG_00 I will try this, thanks

@rctrail_goldmoon5388 2 года назад

What's the difference between v1 and v2 versions?

@calvinl3604 2 года назад

The v1 had 4 magnets while the v2 only had 2. The 4 magnet set up of the V1 was a strange design decision, it made less torque and was less efficient.

@vladislavstudenikin901 2 года назад

Final gear ratio?

@Medbed84 Год назад

It isn't Crawlmaster Pro copy. It is Team brood Djinn's copy. Really good copy.

@CRCG_00 Год назад

I was comparing it to a magnum. And yes, it's not just a copy of the team brood motors it's the same, just different coloured can. Team brood had been selling rebranded motors for a while.

@Medbed84 Год назад

@@CRCG_00 yeah! I bought some cheap team brood motors and there were armature named SURPASS🤣🤣

@skirmich 2 года назад

No epoxy on the armature?, Insta-fail for anyone that wants a long lasting motor.

@rchobbies4479 2 года назад

perfect, i need a kit to turn the wheels of an scx10ll slowly and continuously, can you recommend this product?

@CRCG_00 2 года назад

I'd say it wouldn't hurt to try it out, it's by no means the best built motor but like I said it's got a surprising amount of torque and is crawls well for the price

@rchobbies4479 2 года назад

@@CRCG_00 thancks, is it easy to set up to walk slowly?

@CRCG_00 2 года назад

It's just plug an play really. Your ESC will also play a significant part in the smoothness of the start up. Something like the hobbywing 1080 will be perfect

@rchobbies4479 2 года назад

@@CRCG_00 do i need to configure to use hobbywing 1080?

@rchobbies4479 2 года назад

@@CRCG_00 does it have the same effect on a central gearbox?