$90 4RUNNER Suspension UPGRADE! - Aftermarket Bump Stops

Подписаться 18 тыс.

Просмотров 11 тыс.

50% 1

In this video we will be doing an easy yet effective suspension modification to out 5th gen 4Runner. We will be replacing the front and rear bump stops with a bigger and better option for a smoother ride on and off-road. Please note: This mod was done on a lifted 4Runner so I cannot confirm how these bump stops will sit or function on a stock height vehicle.
8mm Hex Socket - amzn.to/3wYTXpb
Front Bump Stops (Red) - amzn.to/3z44Je4
Front Bump Stops (Black) - amzn.to/3VB374F
Rear Bump Stops (reproduction) - amzn.to/4eeJGph
Blue Locktite (Optional) - amzn.to/45ged20
Lexus GX470 OE Part Numbers (fits 4runner): Drivers 48036-60011, Passenger 48306-60201
Thanks for watching!
As an Amazon Associate, I earn commission from qualifying purchases at no extra charge to you. Thank you for your support!

Авто/Мото

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@T4Rgarage 3 месяца назад

Please note: This mod was done on a lifted 4Runner. I cannot confirm how these bump stops will sit or function on a stock height vehicle.

@joebagodonutssummertime8267 3 месяца назад

How much lift on yours? I dont think it will hurt. It will add a little bit of firmness maybe, when hitting minor bumps in the mall..

@T4Rgarage 3 месяца назад

@@joebagodonutssummertime8267 I have a 3” lift on mine

@PaulVang Месяц назад

Does it help to ensure that wheel avoids hitting the fender when going off road? I’m on a 3” lift

@j.peterson210 13 дней назад

I went ahead and purchased these bump stops for my 2023 with mild Eibach 2.0R lift…2” front, 1” rear. The rears seem decent, but I wasn’t impressed with the Energy fronts. The fronts seem somewhat flimsy and Energy managed to include the wrong thread count bolts which I didn’t know until I pulled the originals off and tried installing the new. I’m fortunate as there’s a decent ACE hardware up the road and found the correct M10-1.25 x 30mm bolts. I didn’t bother pulling the wheels as there was enough room after jacking up a bit. I’ll give these a try, but I wouldn’t be surprised if I buy a different set for the front.

@jamesbispo391 14 дней назад

Kudos .. you just saved me $200 🙌🏻

@whitstroben589 3 месяца назад

Thank you! I like budget builds.

@jlucguerrier 3 месяца назад

You just started a run on those things. Lol... My wife wants me to research the same type of thing for her Rav4 Woodland hybrid. Lol... Great video from a great channel. Thanks bro!

@InFeRn00b 3 месяца назад

Can you make a video on how to safely jack the 4runner (front and back) and location of the jack stands.

@T4Rgarage 3 месяца назад

Check out this video at the 1 minute mark ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2BdjttFvmV8.htmlsi=Ic-lxINA4mlYw4PR

@InFeRn00b 3 месяца назад

@@T4Rgarage thank you very much!

@T4Rgarage 3 месяца назад

Judging by the amount of likes this is getting I should probably make a dedicated video. I’ll try and have one out soon. Cheers

@clemerz361 3 месяца назад

Thanks! I've been meaning to do an upgrade on these! Great advice!

@3s1kill Месяц назад

Easy peasy. Thanks for the video.

@JohnWon-l4n Месяц назад

This is a great channel, thank you!

@rajeezle1 3 месяца назад

I used to run those energy bumps but after awhile i found them too soft and bottoming out my shocks. The ride was awesome tho way better than stock. I now run the extended perryparts bumps. Check em out.

@voodooblue6162 3 месяца назад

Can I run extended bump stops with a mild lift?

@T4Rgarage 3 месяца назад

I’ll check them out, thanks!

@rajeezle1 3 месяца назад

@voodooblue6162 I run extended for 35s. Perryparts also sells the normal version.

@voodooblue6162 3 месяца назад

@@rajeezle1 Yeah, I've heard a lot of great things about the company. The founder is very responsible and takes care of his customers.

@voodooblue6162 3 месяца назад

@@rajeezle1 I was just wondering if I would gain more benefits from the extended version than the normal version.

@proofpositive2379 3 месяца назад

there is no reason to overpay for bump stops. ES bump stops are easy to extend by adding a spacer if you need to extend them for whatever reason. In this day and age there is always a sucker willing to pay 300 dollars for a piece of rubber and some stickers. This mod (energy suspension) is legit.

@DP-wi6hm 3 месяца назад

great video , thx !

@captainsteve19 3 месяца назад

outstanding!

@T4Rgarage 3 месяца назад

Thank you!

@juanito_75 3 месяца назад

Would you want to do this if you don’t off-road? Any benefits for the every day driver?

@rockout3271 3 месяца назад

The rear bump stops youve linked have a vehicle compatability warning on amazon. I know you said and showed that they contact well so im just letting everyone know that amazon puts out a warning before purchase.

@T4Rgarage 3 месяца назад

Yes, they are designed for the Lexus and 4th Gen 4Runner, but also work in the 5th Gen

@bobcoats2708 3 месяца назад

Do you think the Energy front stops will work with stock suspension height? Pretty sure your rig is lifted…

@T4Rgarage 3 месяца назад

They will work just expect them to be touching and kick in sooner making your suspension travel progressively stiffer. Because they are touching they may wear sooner

@joebagodonutssummertime8267 3 месяца назад

@@T4Rgarage You did mention to maybe cut some off a little.

@andrzejzie7046 3 месяца назад

Thank you for your videos. I have a question: what jack lift and stands do you use for your work or which one would you recommend?

@joebagodonutssummertime8267 3 месяца назад

They have a black version, same part number 8.9104G. Is it the same? Sure seems to be

@lenghtofpull 2 дня назад

Won't a longer stop decrease up travel?

@slh48 3 месяца назад

I just sent this video to a friend of mind he has a 2021 Toyota forerunner TRD and it was all blacked out from the dealership Love the 4 runner you guys have I have a 2919 TRD sport the 4 Runner is next 👍👍👍🦾🦾🦾

@jtag209 День назад

Can this fit for Tacoma 3rd gen?

@om888 3 месяца назад

Great tip on the bump stops! Is there a minimum lift required to run the Energy Suspension front bump stops? I suppose it may be related to the height difference to stock bump stops?

@T4Rgarage 3 месяца назад

I have heard of people running them on a stock setup. They may touch and work sooner making your suspension a bit stiffer as it’s compresses. Because they are touching they may wear sooner but I cannot confirm that as I have not done it personally

@lifeofkan 3 месяца назад

They’ll touch sooner but it’s soft, so the dead stop is roughly the same. Key here isn’t the lift itself, but rather your shock’s collapsed length; It’s the job of the shocks to control motion, not the bump stops. The bump stop’s job is to protect the shock bottoming out and blowing into two pieces, hence why the collapse length is what you need to be looking at, not the lift. I can have the same shock, lift it 1”, 2”, or 3”, my collapse length would still be the same. It’ll work for stock setup, and lifted trucks provided the shock collapse length is less than ~17 1/8”.

@bradb2514 2 месяца назад

This is very helpful! Can you tell me what the difference is between the red and black front bump stops?

@T4Rgarage 2 месяца назад

@@bradb2514 Just the Color. Thank you

@joebagodonutssummertime8267 3 месяца назад

48036-60011 and 48036-60010 are the differences in Toyotas numbers, which equates to left and right. Correct me if wrong. Possibly the company that is shipping them is not seeing the difference when packaging.

@T4Rgarage 3 месяца назад

When I got mine they were individually packaged with the correct numbers. Did you receive something else?

@T4Rgarage 3 месяца назад

Drivers 48036-60011, Passenger 48306-60201

@joebagodonutssummertime8267 3 месяца назад

@@T4Rgarage Just about to order and noticed some comments. When I researched it, those numbers popped up. So, I think yours were packaged properly, and some got mismatched and just need to return them.

@ualfltdispatch 3 месяца назад

Ordered today. Getting low on inventory, I wonder why lol.

@T4Rgarage 3 месяца назад

😂 I just looked, I think you’re right

@jrmbtr 3 месяца назад

Is this something that would benefit a 2wd on the street (e.g. ride comfort, handling potholes, etc)?

@T4Rgarage 3 месяца назад

It will help for potholes for sure

@jrmbtr 2 месяца назад

@@T4Rgarage It looks like those Lexus PN are the same for the 4th Gen 4R that have air suspension. Any chance that you have the OEM PN for the 4th Gen rear stops that work on the 5th Gen front?

@broletsdiginasmr5366 3 месяца назад

Can you use these bump stops in the 4th gen 4Runner?

@TehKingT 3 месяца назад

Yes, I run these on mine.

@BK-rz7xq 3 месяца назад

I purchased the rear bump stops from Amazon, put them on and put screw holes closer to outside of truck and flat part in like you stated but passenger side seems to not line up as well as driver side. My driver side rear looks exactly like yours in the video so I don’t think I have them reversed or anything. The two Amazon bump stops look identical in design so don’t seem to be left or right.

@T4Rgarage 3 месяца назад

Each package should have a different part number sticker on it. They are different and not identical. Did you confirm the correct part number with side, I put a photo up in the video for reference

@BK-rz7xq 3 месяца назад

The linked part on Amazon is what I ordered and both came in one bag. I saw the pics you put in the video, this was one bag. The parts I received look the same as yours but no differentiation between the two.

@T4Rgarage 3 месяца назад

@@BK-rz7xq That is strange, mine came in a box with two separate labeled bags inside one large bag 🤔 my suggestion would be to swap sides and see if it works that way. If not, you may need to use Amazon to create a shipping label and return them as they may have sent you the wrong parts. I know of another fella who ordered them through the link and it came the exact same way mine did. He sent me a photo of the parts, so I know the link is the same. Please try reversing them and if it does not work let me know.

@BK-rz7xq 3 месяца назад

I can email you pics, doesn’t really help but atleast you can see what I am talking about. I don’t think I can post pics in comments.

@T4Rgarage 3 месяца назад

@@BK-rz7xq it’s okay they do look similar but have slight differences. Please try reversing sides if it’s not too much hassle

@trailrunnah8886 3 месяца назад

Excellent! I love budget options, I hadn't heard of these. All I've been hearing about lately are the Perry parts. The rear bump stops are clearly longer, do they compress all the way or do they act as extended bump stops for lifted applications?

@T4Rgarage 3 месяца назад

They are longer but they are also much softer. I think they can work for both lifted and stock vehicles. My wheels were tucked in pretty far before they engaged, but like lots of articulation and I only have 33. For a lifted vehicle with larger tires you might want even longer bump stocks. Keep in mind these were designed for a factory height Lexus GX

@erickim28 3 месяца назад

what is the torque for tire back?

@spud6603 3 месяца назад

will this fit the 5th gen limited?

@T4Rgarage 3 месяца назад

Yes they will

@morfdq Месяц назад

For the front. Are they reverse threaded? It looks like you were turning right to take off the OEM. Thank you for the excellent video.

@scottfergusson8411 3 месяца назад

Sumo springs for me !

@Foreverfront Месяц назад

new tacomas and 4runners have no bump stop... just inline ones that arent stopping them breaking lol

@voodooblue6162 3 месяца назад

Did you get your trd skid plate from cartrimhome? How do you like it? I know it has an access panel for oil change, but I wonder if it’s as strong as the OEM one.

@T4Rgarage 3 месяца назад

I did. Seems to be pretty strong. I have taken rocks to it and it seemed to hold up with minor dents and flexed back for the most part. Where are you located?

@voodooblue6162 3 месяца назад

@@T4Rgarage Edmonton.

@Smokey0284 3 месяца назад

Am I the only one who had to get new hardware for the fronts? I had to go to Ace and get two M10x30mm-1.25 cap screws. The ones that came with it were the wrong thread pitch.

@joebagodonutssummertime8267 3 месяца назад

Did you measure the bolt that came in the kit?

@Smokey0284 3 месяца назад

@@joebagodonutssummertime8267 The ones in the kit looked the same but were 1.50 thread pitch.

@joebagodonutssummertime8267 3 месяца назад

@@Smokey0284 Thnx. I will have some on standby when I install them in a couple weeks