Very nice! How much do you charge to come to my country and build an installation? What percentage of plastic remains as coal, and is it enough to do another burn? Or need coal from several? Can it self power with its own gas? Do you have info on the scrubber? Many thanks
Good job 👍 you have bigger device. But what i see is wasting of heat, so this device can be used for house heater and if you have boiler/tank around it can make warm water for radiators and so on. Another idea is you can use oil again for fire. I mean main purpose of it can be used as heater and plus you are recycling plastic and so on. Very interesting because we have lot of plastic waste on the planet.
I have a fair bit of boiler work experience, if you add hydrochloric acid to your water bath all the rust will turn into ferric chloride it's water sol. And kill mold all mold it is a form of a like plant fungicides. Use the carbon in a slow drip fashion to filter out your oil made a small scale version my self. Use it to run a 85 6.2 diesel truck
With a very well insulated retort, electricity can be used, hopefully from wind or solar, to heat the biomass and hence have all the products produced by the reactor for use.
i thought maybe use a fresnel lense pointed at the reactor to decrease the fuel needs, as glass won´t deteriorate over time like solar panels and wind mills do. also a peltier element could be used, but for that size you would need a lot of them which isn´t cheap
This device produces a lot of waste carbon black . That might be pure enough to use commercially, but more likely it's not very pure and would require disposal. Using it to start the process seems much more economical. If you have spare wind or solar power, your most economical use of that resource is putting power on the electrical grid assuming you've got access. There the efficiency would be much higher than using it as an input to this sort of process.
Hello sir, I am just wondering about one thing, first of all, we heat the plastic and form the oil. And then you heat the oil separately and create gasoline and diesel fuel?
Tires are vulcanized so there is sulfur in that oil that is very hard to remove unless done industrially. Refining requires you gasify the oil in a very tall condenser with levels, too expensive for a small operation like this.
dear Andrei. how much fund do you need foe investment? do you know how to purify the oil you get to diesel? can you process MSW in your pyrolisis? if yes, i will invest all the money you need. beside where is your location?
it's basically just extreme temperatures being applied to the material being pyrolyzed, which breaks down it's molecules into smaller pieces, and it is anaerobic since with the presence of O2 it would combust
@@Cajuu awesome .. so with O2 will be combust so it must be anaerobic to be successful way! Then what about safty and how can i apply this way generaly about solid waste In large quantities estimated tens of tons per day?please!
@@johnaconda1510 Good afternoon!! Yes, I just wanted to know, if you did it, take it out, the sulfur? Could you tell me how you managed to get it out? And how could the refinery inform more details?
@@itallomarcos8500 the method to remove sulfur is uses a potassium salt ton induce the reactions required to remove the sulfur from the fuel check out the video at www.futurity.org/potassium-fuel-sulfur-1369772-2/
Hi great video. Can we learn more about your technology? What can you do with oil produced (looks like heavy crude oil) what can you do with coal? Can the coal be used for making charcoal?
@@markyes2041 gasoline, diesel, kerosene, gas edit: yeah refining should be done, but the fuelmixture as is can be used in old diesel tractors, they basically run on every burnable liquid
Basically, plastic is made from the same stuff as gasoline and diesel are made from, so boiling the plastic turns it back into its original state and then you refine it to separate gasoline and diesel from it.. I think its got to do with the temperature and pressure in the chamber and then how you distill it.
Do you have the drawings and instructions up for sale? I am interested to learn how to make high quality diesel and gasoline, while at the same time reducing garbage going to landfill.
I would like to do that project here? how much money would i need to start one and would you be able to help me or partner with me? i have excess of tons of recycle material from A to Z tons. God Bless!
Good day Mr. Kovalov, Greeting you from the Philippines! Are you willing to collaborate with me in introducing or transfer your Technology in our country? I Will try to present your Technology to our city mayor as a solution to our waste problem. Thank you and more power !
Hey leave an email or contact , I would like to talk to you about this type of technology. I Intend to start small power station and produce electricity, from scram tires plastics and wood.