⚡Performance Upgrade! Tab Zombie Breath Intake & DK Customs External Breather Installation⚡

Подписаться 106 тыс.

Просмотров 83 тыс.

50% 1

Tab Zombie Breathe Intake - shorturl.at/iuvOX
DK Customs Decrete External Breather - shorturl.at/uDGI5
Join us in this video as we guide you through the step-by-step installation process of a Tab Intake and DK Customs External Breather. Enhance the performance and style of your motorcycle with these aftermarket upgrades. Providing increased airflow and power to your engine. Additionally, discover the benefits of the DK Customs External Breather, which helps to reduce oil blow-by and prevent oil contamination in the air cleaner, resulting in improved engine performance and longevity. Whether you're a seasoned motorcycle enthusiast or a DIY beginner, this comprehensive video will equip you with the knowledge and confidence to successfully upgrade your motorcycle's intake system. Get ready to unleash the full potential of your ride!"
Steve's Favorite Motorcycle Must-Have Tools!
Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicsound.com
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.

Авто/Мото

Опубликовано:

3 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 191

@sikbaggers Год назад

👉👉 Make sure to like this video, subscribe to our channel, and hit the notification bell to stay updated with our latest content. Share your thoughts and questions in the comments section below.

@macmac3770 Год назад

Good stuff Steve. I added the EBS from DK Customs back in February on my old TC88 after much research. Incredibly well built and extremely well designed. Love your tips brother - stay safe out there. 🤜🏼

@ericcamacho2859 29 дней назад

What type and size bolts did you put in the plate to extra support the air breather?

@bigdoo566 Год назад

Another great video Steve. Straight forward installation of 2 great products from 2 great companies.

@sikbaggers Год назад

Yes sir...turned out exactly how I thought it would...tabs breather is so much better looking then the snorkel and the external breather system will help keep see through plate clean and not let the K&N filter get all clogged with nasty oil. Thanks for checking it out!

@hoyt15flhtk82 Год назад

AWESOME VIDEO Brother Steve!!! Keep up the good work, I appreciate the money your saving me and my motor loves the upgrades needed to keep her running 100%!!!

@sikbaggers Год назад

Thank you sir! Much appreciated and really glad to help! this breather and external breather turned out pretty awesome!

@hillbillytrucking8483 Год назад

I got the breather and the transformer mount all from DK and never been happier with a product

@sikbaggers Год назад

NICE! Im loving it after getting it all installed..The lok is exactly what I was going for.

@calimilk1113 Год назад

Nice, I really like my DK customs external breather with banjo bolts!!!! Huge difference!!! Alot of people have no idea tried explaining to them.

@sikbaggers Год назад

yeah its kind of complicated to explain to some people lol trust me i know but it does work great! Super easy to install too!

@YatiMoto Год назад

I’m so glad I subscribed to your channel! All your videos are very helpful! Please keep ‘em coming!

@sikbaggers Год назад

Thank you sir! Lots of vids coming out in the next few months...parts are piling up but I have to get these bikes out that need work and I cant do videos on also....gotta pay the bills lol thanks again for the sub and be safe!!

@YatiMoto Год назад

@@sikbaggers hey, you gotta do what you gotta do! 🤙🏽

@frankprettitore6192 5 месяцев назад

These are the best how to videos on the internet.. Thank You

@sikbaggers 5 месяцев назад

thank you Frank! Much appreciated sir!

@waynedl13 8 месяцев назад

Dk customs is great. I’ve bought a few products from them and their customer service is top notch. Blown away by how much better my bike runs!

@henry93612 7 месяцев назад

You can let DK Customs know I bought the breather setup because I saw it here. Thanks for the vid, I wasn’t aware of the brand and this style but it’s exactly what I was looking for.

@sikbaggers 7 месяцев назад

thanks for checking it out Henry! Its been a great upgrade!

@dennisw4654 3 месяца назад

Good job sir. Was really pleased to see you venting the hose upward. I installed a DK kit a couple of years ago routing the hoses as you did. Took some verbal heat from a number of ignorant repliers who didn't understand. Two years out now and I can report the system continues to work perfectly. Thanks for posting.

@sikbaggers 3 месяца назад

yeah...you can do it either way..just let them know it has pressure..its not gravity fed lol and thank you for checking it out! Much appreciated.

@robmacspece46 Год назад

Another great video, Steve! BIG thanks for providing all those links in the description…very helpful! Hope to see you at Sturgis! Making the long ride out from NJ!

@sikbaggers Год назад

Thank you rob! And no problem man...glad to help! We will be there for the entire week and if you see us out make sure to say hi! Always great to meet everyone out there.

@robmacspece46 Год назад

Tab Zombie breather on the way to me along with DK kit!

@robmacspece46 Год назад

He Steve! Good news/Bad news - Good news is that the Zombie breather is on and I love the look! Bad news is that it sparked a bigger undertaking. I’ve now committed to suspension upgrade with Legend REVO shocks and AXEO front end kit. Also, going with the Redshift 468 cam and Thundermax ECM. Cha-ching$$$. Anyway, here’s my question for you: while were in doing the cam seems like good opportunity to upgrade some other stuff, like the oil pump. Most RU-vid techs talk about 2013-2020 bikes touring bikes (2020 FLTRXS for me) could use upgrade but that not all 2020 bikes have the old pump. How do I know if mine has the pump that should probably be upgraded?? Any insight would be greatly appreciated. Also going to replace the inner cam bearing and probably the lifters and cuffs. Thank you!

@gishere3805 Год назад

Great install videos. Thank you!

@sikbaggers Год назад

thank you for checking them out and glad to help!

@Big88Country Год назад

Another EXCELLENT video Brother Steve! Thank you Sir! This was the first thing I did to my bike, installed the DK Customs EBS and catch can! Luckily, this bike isn't a heavy spitter.

@sikbaggers Год назад

thank you sir! Been prepping for sturgis so sorry for th3e late reply man...playing catch up now, leaving in 2 days

@Big88Country Год назад

@@sikbaggers GET 'ER DONE Brother! Have a great time in Sturgis!!

@ryanm8456 Год назад

Another great video Steve. Hope you are doing well

@sikbaggers Год назад

thank you Ryan! Doing great buddy!

@deelzridesandadventrues 9 месяцев назад

That looks sick man! I want to put that on my Streetglide.

@DKCustomProducts Год назад

Awesome video! Great explanation!

@sikbaggers Год назад

Thank you sir...great product!

@Americanpatriot602 Год назад

Dk Customs makes some good stuff! Their breathers are good too! But i like this tap performance Zombie breather!

@sikbaggers Год назад

Yes..I wasnt even aware of their breather until I found the external one...I love the way it turned out!

@Big88Country Год назад

Thanks Steve! Also, there's plenty of evidence out there that shows the top of your pistons get caked with that un-burnt oil in the form of heavy carbon deposits getting layered on your piston tops. Best thing, in my opinion, is to install a DK Customs External Breather to keep that oil off the tops of your pistons. Some bikes are heavy spitters, some aren't. I installed one on my 05 Carburetored Electra Glide and it worked great. Man, that kit looks SWEET on that bike!

@sikbaggers Год назад

Yes sir...its probably one of the worst things for your engine that the epa has said HD must do. Ive sen plenty with caked heads...even newer bikes and you are right...ive has ome in hee that never spit a drop and some puke it out like crazy. My 14 sg likes to puke..the 15 rg,..not so much, either way..this is well worth the few bucks to help keep everything clean.

@Big88Country Год назад

@@sikbaggers Yes Sir, ABSOLUTELY!

@franksaxton3583 Год назад

I have a twin cam and when I decided to do a stage one upgrade I was predisposed to want to buy fro DK Customs. They seem like sincere folks and it's a small, local, USA business and that's what I prefer to support. However, after exchanging a half dozen e-mails asking extremely basic questions all I got were vague, unresponsive replies. They wouldn't even tell me what exact products I should buy to ensure proper fitment. Plus, their prices are way up there on the high end compared to competitors. So their lack of interest/inability to answer even simple pre-sales questions and high prices told me that this was not a company I wanted to deal with. As to the breather... I shopped all over and as much as I am not a fan of Arlen Ness, their big sucker product was less expensive and better than anything else that's out there. And IN STOCK! HUGE filter surface area. I'm definitely getting more air than the engine can gulp down now. Not crazy about the boring black disk cover but I can live with it. Function over looks, right? I appreciate your videos but this one seems to be aimed at posers who are into "hip" products where money is not a concern. Most real Bikers care more about function and price. I don't see an M8 ever being in my garage so it's all a noop. But you do ask for comments so here's mine for what it's worth. I find most of your videos to be very helpful and informative. This one maybe not so much.

@DKCustomProducts 10 месяцев назад

I am so sorry you did not have a good experience with our Customer Support. We make every effort to provide Quality Parts, Shipped Quickly and Accurately, AND Superior Customer Service. Thank you for your comment, and we will take it to heart, as we are always working at improving.

@traviswhitworth6506 7 месяцев назад

It's a shame you didn't have a good experience with DK s customer service. I've emailed them a few different times and got very clear and specific answers to my questions. I have purchased their filter relocation kit, oil cooler, and their premium external breather kit. I'll be installing them in the next couple of weeks.

@u.s.aarchangelforgod3679 Год назад

TY Steve

@sikbaggers Год назад

yes sir! Thank you for checking it out!

@robertperry5272 Год назад

Great Video

@sikbaggers Год назад

thank you Robert!

@jeffo.3811 9 месяцев назад

Great video

@sikbaggers 8 месяцев назад

thank you!

@Breakout2018 4 месяца назад

Nice product video

@sikbaggers 4 месяца назад

Thank you for checking it out!

@Athrottleholic Год назад

Great video!!! 🤜🏻🤛🏻

@sikbaggers Год назад

Thank you sir!

@ThePapagonza Год назад

Good stuff man

@sikbaggers Год назад

thank you sir!

@jimyounger9490 Год назад

Man I love that Harley breather.

@sikbaggers Год назад

Hey Jim, agreed man! Seen that last year and knew if I built a performance bagger it was getting this breather...it turned out nice! Thanks for checking it out!

@incrediblydrunk Год назад

I have a big sucker intake that uses the stock breather cover on my 20 rgs. I used to get a bunch of oil in its built in catch area. Installed a DIY trans cover breather using 3/8 fittings,hose and a check valve. I have zero oil or residue in my intake now. Under 20 bucks in parts . I do think this Tab breather looks great though .

@sikbaggers Год назад

That is another great way to release the pressure in your motor and sounds a lot cheaper! Thanks for checking out the video and sharing your experience!

@moonshinexxx420 Год назад

Thanks!

@sikbaggers Год назад

thank you for checking it out!

@peted2770 Год назад

I just exhausted the breather under the bike. No catch can to worry about, it just happily vents away. I did this with my 96 Low Rider and then 2022 Street Bob. Once in a while, I will see a small drip on the floor. I have never seen oil residue on the bottom of my frame or the bike from the vent tube. I found that interesting because the Low Rider puked oil all over the air filter. The Street Bob's filter was damp with oil as well.

@sikbaggers Год назад

Hey pete...you can certainly do that specially if its not puking tons of oil...youll just have to deal with oil on the floor.

@user-wg7dx7er8w 3 месяца назад

Nice Job,

@sikbaggers 3 месяца назад

thank you for checking it out!

@AntonioJimenez2013 10 месяцев назад

Thanks

@sikbaggers 10 месяцев назад

yes sir!

@RoadGlideSTShenanigans 6 месяцев назад

I am sure it’s a great product with great results. However, it seems that oil will have a hard time going up the hoses fighting gravity as it leaves the intake area. I know It is under slight pressure but even so most of the oil will stick to the interior wall of that hose and mostly air will be going through instead. I would recommend running it downwards to eliminate this potential issue. HPI makes a similar product that I have on all of my 3 M8 engines, so far great results as well….. great video!!

@sikbaggers 6 месяцев назад

It was actually recommended by them to run it up...however you can run it either way. Its however youw ant to do it. Its doing its job for sure even with it up. nothing dripping from the hose, like excess oil, and there a tad bit in the can...so id say it has enough pressure.

@stormharrington7505 Год назад

Good stuff

@sikbaggers Год назад

Thank you! Glad you enjoyed the video!

@russnicholson6066 6 дней назад

Another great video, you make it all look so easy. Question concerning the open breather, what about riding in the rain? Will water not find its way in?

@sikbaggers 5 дней назад

Thank you sir. ive been caught in some pretty heavy rain and never had an issue with it...most of the guys I ride with all have open breathers and I dont think Ive ever seen a rain sock being put on...no ones had a an issue with it. If your bike is sitting in a pretty hard down pour I might cover it with something but actually riding down the road, most is going to shed off before it can soak in

@grimeyhonkyracing3938 Месяц назад

I got an external breather kit a few years back from DK i ran the hose into an old crushed beer can ziptied to the frame 😂

@sikbaggers Месяц назад

well..thats one way to do it I guess lol

@paparalph4 Год назад

I eliminated the catch can with a 3in copper tube that fits into the end of the hose. I ground beveled one inch of the end of the tube at about 20 digress until the tube just had a 1/16 opening at the end. put the straight cut end in the hose and used a stainless hose clamp to clamp it to the the exhaust pipe (horizontal area). Can't see it because of my heat shields. Figure, instead of burning at combustion I'll burn it after. Had it on for over a year, have not seen any dripping or smoking.

@sikbaggers Год назад

Thank you for sharing your experience with us..was there a reason for eliminating the can?

@paparalph4 Год назад

@@sikbaggers Ya, mine was like a small filter. I would check it when doing oil changes and wasn't sure if it was getting too much build up and needing a change out. Thought it better not to worry about and just burn it after combustion.

@lawsonfan5797 9 месяцев назад

I understand this cures the blow by going into back into your motor, does it also alleviate possible sumping issues?

@41BeachComber Год назад

I have 2017 cvo pro street breakout with the HD Breather like on that bike, how much better would it be to change it to the one you put on that bike with the catch can too. Bike has 20,000 miles.

@SteveTheGasMan Год назад

Ordered same kits. Was just wondering if you remember what size bolt and tap you used to plug opening on top of ring spacer. Just wanted to make sure have everything when it shows up

@sikbaggers Год назад

Thank you brother!! Much appreciated!

@StevePollackov 2 месяца назад

Great video. Looking for information about this external breather. I was thinking of going with a Feuling vented dipstick. Will this accomplish the same result as the DK external breather? Seen other videos and it seems like it does, but I’m not totally positive.

@sikbaggers 2 месяца назад

Hey Steve...yes sir that will do the same thing

@trophydad1527 Год назад

All it needs now is a light strip in there 😎

@sikbaggers Год назад

I've seen some of those with strips in them..pretty cool .I dont think ill have any accent lights on this build though.

@Ledsnbaggs Год назад

what is the PSI oil Pressure of oil that goes through the banjo bolt?

@tassorepakis2892 11 месяцев назад

Thank you very much for the excellent and very informative video Steve! I have watched it many times because both these mods are the first ones I will be doing in my new FLHXS! Do you think the Tab cleaner will work with the DK Customs Transformer? If it does, you probably you won’t need the support bracket, the cleaner’s spacer, filling the venting hole etc.

@sikbaggers 11 месяцев назад

No they wont mix and match...youll have to pick one or the other. Glad to help!

@tassorepakis2892 11 месяцев назад

Thanks for the reply, and I hope you had a good time at Sturgis@@sikbaggers Keep up the great work!

@waynedl13 6 месяцев назад

What size were the bolts you put in the throttle body to attach the bracket?

@firesquad0155 Год назад

I really like the look of this Air intake will it work with the 23 Tri Glide

@sikbaggers Год назад

Yes sir it will fit the 17+ Tri glides.

@mrjkjhoedog Год назад

Really like the look of this filter but I can't get it since I have a 2016 Road Glide Ultra. Looks like I missed the opportunity by a year since they advertise 17 and up.

@sikbaggers Год назад

yes it is for the M8 motors...I also have a 14 SG and a 15 RG that I cannot use it on. Check out these twin cam high flow air claeners from DK Customs though...a lot of them are very similar to this one from TAB. www.dkcustomproducts.com/twin-cam-outlaw-hiflow-828-air-cleaner-complete-systems-99.htm

@mrjkjhoedog Год назад

Appreciate the reply and the recommendation. I’ll go check it out.

@HardysHQ 11 месяцев назад

Nice, I've installed something similar on my 22 Fat Bob. Does that Oil Catch Can have a Breather on it? Where does the Oil pressure go?

@sikbaggers 11 месяцев назад

watch starting at 15:30 I explain how it works. It is called a external breather so yes it is a breather.

@rchenderson9958 Год назад

Do you need to run a rain sock with this breather? I like the looks and how thin it is!

@sikbaggers Год назад

I would say yes we will be getting a rain sock for it for sure.

@dmac620 11 месяцев назад

Is the oily mist coming from the breather bolts under enough pressure to travel upward through the tube, against gravity, to the "T" and then to the tube you ran under the tank? I am in the process of putting in a DK Customs external breather system and the upward route you did definitely looks cleaner but I was unsure if the oily mist would travel upwards before making its way to the catch can.

@sikbaggers 11 месяцев назад

yes there is enough pressure to push that oil up and over...some kits are designed to be ran exactly like this..you can choose with this kit which way to run it, up or down.

@JaysonBucy Год назад

Question, when swapping the breather and/or exhaust the bike will obviously benefit from a new tune. Can you run an aftermarket tune now without voiding the warranty?

@sikbaggers Год назад

Yes...great question, kind of long winded answer. There are certainly a lot of "grey areas" when it comes to tuning your bike. HD will tell you they have to do it or will void your warranty and that's a very short answer but not completely true. I use a power vision and HD uses them as well along with other tuners...basically if anything happens to your motor, HD will automatically say "its because of your tune or tuner" . Its literally their job to say something you did messed it up and then you have to dispute that claim and then it is up to them to prove that your tuner did it...You dont have to prove that your tuner didnt do it. In the long run youll usually win the case..unless of course you really did something stupid. Even a completely stock bike can benefit from a tune...epa has set the standards that they have to tune to and its OK...not great. changing this heavy breather to the TAB wont necessarily need another tune because it was a open breather to an open breather but the tab one has more surface area for more air intake. So it could stand to have the fuel/air ratio lined out but it wont hurt the bike to ride it with the canned map tune

@davidg. Год назад

Curious. How is that breather any better than the stock ventilator? Same surface area. Is it because the upgraded filter?

@sikbaggers Год назад

Well I never said it was better than the stock ventilator..However I did say its better than the snorkel heavy breather because of the increased surface area. And yes the K&N filter can make a difference but it wont be "seat of the pants" difference...as in you wont feel a huge gain in HP because of the filter itself. Surface area is what we are going for here and I love the look of the tab breather..that is why I choose that one over the ventilator. If you like that one or are currently running it and you are happy with it I would stay with it and maybe do the external breather mod if you are getting any blow by. Be safe and thank you for checking out the video David.

@VA_Biker Год назад

Hey Steve. Great video. Just curious if you've had a chance to ride the bike with the external breather. I did the same mod but with an earlier version from DK and after about a week, the can filled up and smelled like burning oil every time I stopped. Thanks.

@sikbaggers Год назад

I have and its been checked..seems all good so far... If you are getting that much oil in your catch can you probably have some other issue..I didnt go into great detail in the video about what causes the excessive blow by but first thing and its the most common is to check your dipstick. When filling your oil make sire it is in the middle of the full and add...not at the full mark. check it out and follow the marks on the dipstick. Running the wrong kind of oil or weight in your bike. There is a chart in your service manual that shows the air temps you ride in vs what weight oil you should run. Warmer temps would require heavier oil and vise versa. If your bike is still spitting that much oil afterwards then you may nee to check your umbrella valves. They could be malfunctioning and allowing way to much oil to pass. check those things and it will help with your excessive blow by.

@VA_Biker Год назад

@sikbaggers Thanks! Good advice. That was back in 2016 on my TC. Probably just had to much oil in it. Cheers!

@sixwheelcarlisle8491 2 месяца назад

You know, I cannot find any videos of people modding the stock ST’s heavy breather intake with a catch can. That’s something I would love to see done.

@sikbaggers 2 месяца назад

Your best bet is to go with a vented dipstick to be honest...much easier to do also

@jacaughron55 Год назад

So would this work w my Eagle 90 elbow big breather like the one u took off..??

@sikbaggers Год назад

Watch Dks video here it explains it a lot better ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YV1RGhDhD3Y.html

@rayw8177 Месяц назад

that intake filter looks like one have on my cvo 2011 other than top and bottom a 2" plate in center the SE cover, thought about cutting it off? are the 2 the same as i have the KN filter in?

@sikbaggers Месяц назад

im really not sure on the k&n filter and how many other filters that one fits man..im sorry.

@tommyboy55901 Год назад

Can a person utilize the Same catch can for the Traske trans vent kit?

@sikbaggers Год назад

you can if it has the same hose size.

@terrencewalker9216 8 месяцев назад

What size bolt did you use on that breather back plate to block the hole

@sikbaggers 8 месяцев назад

i dont remember what size it was. I picked one from my bin full of bolts that was smaller than the ring. Matched a tap to it and then tapped it out. The final bolt was too long so I cut it off and re threaded it so it just barley cleared the inside and you cant see it hanging down through the breather. If you dont have randomm bolts laying around I would just take the ring to the big box store and match up a stainless steel bolt to the hole. You want it slightly larger than the hole.

@nevillegreg1 Год назад

Interesting but I've been driving for 46 years (riding 40) and have never had any problem with the stock set-up on my bikes and cars, including with SE air cleaner upgrades on all the Harleys I've owned over the years.

@sikbaggers Год назад

That is why they sell them the way they do...they run, the have the bare minimum to run with a basic tune and basic intake and exhaust. You do not need to do anything to them. This is an upgrade.

@user-iu7ik6cz6z 5 месяцев назад

Can the can be installed on a 2015 FLHTK with stock breather?

@sikbaggers 5 месяцев назад

You would have to call DK and ask...they may have a different one for the stock breather.,..not sure.

@edm4079 5 месяцев назад

I have a 1999 FLHTCI full bagger that needs a tank clean, new filter, and for caution, a new pump. 89k on the odometer now. Not sure if I need the wrench (no big deal to buy one), Do you have a video on that?

@sikbaggers 5 месяцев назад

I dont have a video out on the removing the pump, however I have a tank on the way for this bike so i will be doing one soon

@trfishing4106 11 месяцев назад

Any concerns about running the hoses up instead of down?.

@sikbaggers 11 месяцев назад

absolutely not..there is plenty of pressure to push up that oil..some kits come that way with no option to put it down.

@jjs8046 Год назад

Link to that OEM Air Filter Box Mount please.

@sikbaggers Год назад

heres one on ebay for 10.99 www.ebay.com/itm/401625490519

@garybaker8875 5 месяцев назад

Can we get an updated link to that catch can for the life of me i cant seem to pull up the one you have in this video on DK website i may not be holding my mouth right idk 😂

@sikbaggers 5 месяцев назад

Its the second linkin the description of the video..I just clicked it and it takes you here www.dkcustomproducts.com/premium-discrete-breather-system-twin-cam-touring-softail-dyna-dk-pr-dis-brt-tc.htm I thought maybe the link wasnt working but it is. Premium Discrete Breather System Twin Cam & M8 Touring Softail Dyna

@bradlangley5326 4 месяца назад

I looked through the comments but didn’t see a response. Any idea on the size of the bolts that attach the bracket you reinstalled to the throttle body??

@sikbaggers 3 месяца назад

Thanks for checking it out and sorry for the late reply been on vacation..and yes I will be trying to tap it more so I can run it in further.

@texcalit 24 дня назад

If just adding the external breather do you need a tune after?

@sikbaggers 24 дня назад

no...the external breather does nothing but alow the blow by to go into a filter rather than your intake to be burned off.

@davidsizemore2745 Год назад

Wish the Tab would fit on my 2016 Ultra Limited

@AzzKicker-bz1cb Год назад

@David Sizemore I too have a 2016, but it’s an Electra Glide Ultra Classic! Your comment makes me wonder(curious, but not thinking of buying) if this Tab performance exhaust would fit my bike! Personally, I believe all exhaust system manufacturers make them so there are options for all fitment requirements.

@sikbaggers Год назад

yes unfortunately it is only made for the M8 bikes as of now. But thank you for checking it out David!

@sikbaggers Год назад

The tab exhaust is made for several year bikes, including yours. I have tab headers and 50 cal slip ons on my 2015 road glide which is the same twin cam as your 16...and then they have slip ons for the newer M8 models like this one. They sound amazing!

@frederickbeard8096 Год назад

Do you have to re program the bike since you upgraded the air intake

@sikbaggers Год назад

The one thing about tuning your bike is that even when its stock it can benefit from a tune. The basic map tune that HD throws on these things is just that, basic. So anytime you start adding more air, or letting more air go through the engine and letting more air out ( open headers) you will need to tune. Just changing the air cleaner wont change that much on its own. So no you dont need to tune but it will greatly benefit your bike if you do.

@craigfox9766 Год назад

Do they make zombie pipes and a zombie map to match?

@sikbaggers Год назад

I dont know that there is a pipe that matches this breather but I do run the zombie 50 cals and the headers from TAB on my RG and love them. I use a dynojet power vision for tunes...very easy to tune with a "open breather" 2-1-2 headers and any set of slip ons...then you can fine tune from there with the autotune feature.

@bobthielemann9307 Год назад

Take some black nail polish and paint that brass fitting so it "disappears".

@chrislumbo6607 Месяц назад

I’ve heard that we can utilize the catch can hose and run it directly to the vented tranny cover. Didn’t sound legit to me. Any insight?

@sikbaggers Месяц назад

Hey chris, A vented tranny cover is just that, its a vent...it vents out...and its the tranny, your blow by is from the engine oil..they both blow out...so you cannot put one to the other...T man used to make a 3 section tranny cover that was a tranny vent and the other half went to the engine oil with 2 lines and was an "in" so blow by could go back into the engine section...they stopped making it as far as I know. I couldn't find one a few weeks ago when I was looking.

@user-hh1fm9fe8u 7 месяцев назад

What's the product #for the dk catch can kit

@sikbaggers 6 месяцев назад

Links are in the video description www.dkcustomproducts.com/premium-discrete-breather-system-twin-cam-touring-softail-dyna-dk-pr-dis-brt-tc.htm

@user-di4wx6yx7v 9 месяцев назад

What was the bracket part number?

@sikbaggers 9 месяцев назад

OE/OEM Part Number H/D - D2089320

@nvalueff Год назад

If weather is cold, 55 or less you’ll need to drain the water from condensation every 300 miles

@denis9272 3 месяца назад

👊🏻

@sikbaggers 3 месяца назад

👊

@vincentwebster8313 11 месяцев назад

Why does Dk use massive thick hoses?

@sikbaggers 11 месяцев назад

Dont know

@bringbackhipv Год назад

doesnt it need to be tuned now?

@sikbaggers Год назад

The bike, from the factory can stand to have a tune. It comes with a map tune..which is generic. That being said, changing the air cleaner alone will not require a tune but can greatly benefit your bike if you do. Just opening the breather doesnt mean youre getting more air through the bike becasue its still restricted by the cats in the head pipe. Opening the breather and no cats will require a tune.

@richardrussell500 Год назад

Have you also considered the Trask vented tranny cover?

@sikbaggers Год назад

I have..I did not purchase it but I have installed one on a trike before. I also have the trask breather and external breather kit on out softail build

@richardrussell500 Год назад

@@sikbaggers I am running the Trask vented cover and the DK Customs external breather setup... I get little to no snot out of the head breathers in my catch can. so far I am pleased. great video again as always. thanks : - )

@slayer04031974 Год назад

Why in hell can't an engine engineer come up with oil return or recycling line back to the engine to avoid any blow by or larger oil cooler with the ability to hold excess oil? Instead of external tank or catch can?

@stevetomblin9007 Месяц назад

Because that oil is super dirty and watery. Don't want that back in the case.

@slayer04031974 Месяц назад

@@stevetomblin9007 Better oil filters, water separator, and change your oil regularly. But I did notice a moisture problem with my 21 Slim. And I only owned it for 7 months. After 11,000 miles and I regularly warmed it up for 3 minutes. They told me it wasn't getting hot enough. Lol. I cruise at 85mph..

@stevetomblin9007 Месяц назад

@@slayer04031974 I just bought a 23 r.g. has 7 miles on it. That kit is the first thing I'm putting on..

@HarleyTig Год назад

😎✌

@sikbaggers Год назад

thank you Tig!

@HarleyTig Год назад

@@sikbaggers you welcome Steve

@AngelIRQ0508 Год назад

👍🏼🥃🇺🇸

@sikbaggers Год назад

thank you!

@genekelley7579 Год назад

🛑🛑 I wouldn’t change the Harley Heavy Breather, for the Tab Unit. The bike looks, and runs Awesome, with the Harley Breather. I would save your money, or spend it elsewhere. 💯

@sikbaggers Год назад

Thank you for sharing your thoughts on this Gene...much appreciated! Certainly if you are happy with the snorkel style air cleaner then by all means there is nothing wrong with it...for me it was just the looks and it didnt quite fit this build. Either way the M8's could stand to have the external breather put on...seen to many of these puking oil on the side of the motor. thanks again Gene!

@tonycole9620 Год назад

$449 for an air filter!?!

@derfskittlers6125 Год назад

Anything is better than that snorkel.

@sikbaggers Год назад

agreed! lol

@munk3ymxn587 11 месяцев назад

DUDE!!! THE FCN BREATHER IS 450 DOLLARS!! WTF IS THAT SHT

@tommidd8042 Год назад

Sick? Seen a doctor?

@sikbaggers Год назад

im trying to remember if I said I was sick in this video or sick and tired of something ? lol

@tommidd8042 Год назад

@@sikbaggers LOL 👍

@dilo777 Год назад

I saw that tab is taking all their non epa compliant stuff off their website. Right now they are moving it to their race section but they are going to remove it all together…..the epa needs to be dropped!!!

@sikbaggers Год назад

All of them are...yes the epa is got its hands a little dep in this one..we will see a work around soon.

@dilo777 Год назад

@@sikbaggers you think so? I’m not sure this time. Have you seen what the epa has been doing with diesel shops and tuning shops? They’ve been fining them and opening lawsuits against them if they’ve been found to even sell products that modify the emissions part of a diesel truck. I’m not sure if we aren’t going to see the same thing with motorcycles soon.

@lylethomsen7901 11 месяцев назад

I've made a better way to keep your engine clean from the blow-by spewing oil and the other crap that comes out of the heads on your HD!! Since I haven't registered my product with the Patent Office yet, I can't tell you or show you what it is, and what it does for your baby! Lmfao!!!!! I'll let you know when I get it together.

@sikbaggers 11 месяцев назад

cool..get it together and let me know...im interested,