✨GMC BRAKE WARNING LIGHTS-FAST EASY FIX✨

Quick and Easy - 5 Minute Appliance Fixes

Подписаться 53 тыс.

Просмотров 265 тыс.

50% 1

✨GMC BRAKE WARNING LIGHTS-FAST EASY FIX✨
SUPER EASY 10 MINUTE FIX FOR ABS/BRAKE WARNING LIGHTS FOR YUKON, TAHOE, SILVERADO AND ESCALADE
JUST TAKES a few minutes to clean the ground connection located on the frame next to the Driver’s side front tire. When the ground gets corroded It shows up as an ABS BRAKE LIGHT Indicator light.
Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
Check Out Scott’s over 600 Appliance Repair Videos:
/ @scottthefixitguychannel
IF MY ADVICE HAS HELPED YOU...
PLEASE CLICK HERE TO DONATE
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
PLEASE HELP TO KEEP THIS SERVICE GOING
THANKS SO MUCH😀
Check Out Scott’s over 600 Appliance Repair Videos:
/ scottthefi. .
Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
PLEASE HELP TO KEEP THIS SERVICE GOING
THANKS SO MUCH😀
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
Check Out Scott’s over 600 Appliance Repair Videos:
/ @scottthefixitguychannel
IF MY ADVICE HAS HELPED YOU...
PLEASE CLICK HERE TO DONATE
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
Check Out Scott’s over 600 Appliance Repair Videos:
/ scottthefi. .
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
Click Here ToJoin Our Channel Membership and Receive Great Perks: / @quickandeasy5minuteap...
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/scottthefixitguy
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu

Хобби

Опубликовано:

22 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@darthgumby2406 Месяц назад

Awesome video. I'll give this a try. Makes sense.

@QuickAndEasy5MinuteAppliance Месяц назад

Best of luck😊

@danielortiz9590 2 года назад

At this point any advice is greatly appreciated 👍 Thank you I'll try it on my Yukon

@QuickAndEasy5MinuteAppliance 2 года назад

Thanks Daniel, it fixed our Yukon👍

@bryanblatz2001 3 года назад

I started by trying to take my ECBM apart but got stalled by the first T-20 bolt and gave up. Then I saw your video and cleaned the ground connection and lo and behold it worked! I sure am glad I didn't get the EBCM apart lol. Thank You :)

@QuickAndEasy5MinuteAppliance 3 года назад

Thank God, cleaning that bolt is so much easier🙏😊

@bryansmith4039 2 года назад

@BakaDakaLaka79 2 года назад

2002 GMC Sierra had the abs and brake lights intermittently on before trying this. Now the lights are gone! Thank you so much.

@QuickAndEasy5MinuteAppliance 2 года назад

Nicely done 😊😊😊😊

@morisventura674 3 года назад

Thanks, it did worked.

@casssndraburton-harris6303 2 года назад

Is it okay to drive with the lights on. I checked the brake fluid and it's fine

@erickportillo613 2 года назад

So in my 05 GMC Sierra it’s leaking from the Ecbm and it’s rotting in not sure what I should do, replace it and bleed the system??

@ShawnWarner 9 месяцев назад

You fixed my truck! Thanks bud!!!

@QuickAndEasy5MinuteAppliance 9 месяцев назад

Glad to help😊

@gunsmokefan1344 5 месяцев назад

Man I got to try this on our 04 Tahoe I hope it works!Thanks Great video!

@QuickAndEasy5MinuteAppliance 5 месяцев назад

Please let us know how it goes 😊

@myphone1947 Год назад

Awesome video men you save mi life!!

@QuickAndEasy5MinuteAppliance Год назад

Awesome, thank you👍

@sartainja Год назад

Superb presentation of very useful information.

@QuickAndEasy5MinuteAppliance Год назад

Thanks so Much Jeff😊😊

@gayoso59 3 года назад

Thank you so much

@QuickAndEasy5MinuteAppliance 3 года назад

You’re very welcome 👍

@WJHandyDad 2 года назад

did you have a soft pedal that would go to the floor, or just the warning light

@QuickAndEasy5MinuteAppliance 2 года назад

Just the light. Soft pedal needs the brake lines flushed out to get the air bubbles out.

@Ivan_Sj408 2 года назад

I can’t seem to find those connections on my 01 gmc Sonoma 4.3

@magdalenoybarra2793 3 года назад

Thanx a bunch buddy , im gonna try this on my 03 Silverado.

@QuickAndEasy5MinuteAppliance 3 года назад

Please let us know how it goes.

@magdalenoybarra2793 3 года назад

@@QuickAndEasy5MinuteAppliance Yezz zirr, will do.👍🤠

@lisagallups9792 Год назад

Thanks for your video my brake abs and esc light are on car has no codes and everything else is fine even had it in different shops I'm hoping this is my issue as well thanks again 😀

@QuickAndEasy5MinuteAppliance Год назад

Thanks Lisa. I bet cleaning that ground connection will fix it.

@kenwaters6589 2 года назад

Worked like a charm! Thank you for the tip!

@QuickAndEasy5MinuteAppliance 2 года назад

Thanks Ken👍😊

@MrGrassymaps 2 года назад

Omg thank you

@QuickAndEasy5MinuteAppliance 2 года назад

You are very welcome😊👍

@jacobjames319 Год назад

That work perfectly

@QuickAndEasy5MinuteAppliance Год назад

Thanks Jacob😊👍

@KoshiroTakayanagi 2 года назад

Thank you for this video. Just saved me 1700 dollars

@saguarobuildersllc9364 Год назад

I know what I'm doing tomorrow, thanks!

@QuickAndEasy5MinuteAppliance Год назад

Good luck!👍

@joleaiperlis5347 8 месяцев назад

Where do those ground cables connect in the engine bay????

@Isvvc10 Год назад

Is the truck drivable when this happens my truck feels like it went into limp mode could it be tranny issues ? but no check engine for me just the service brake system, abs light and e brake light any ideas ? thank you ! great video !

@bigwahoo8686 11 месяцев назад

You have an output shaft seal/bushing bad.

@eightys_style6077 3 года назад

My trucks rotted to hell under there, good old alberta winters, definitely gonna do this before anything else, thanks alot, hadn't considered this as a problem

@QuickAndEasy5MinuteAppliance 3 года назад

I betcha it works👍

@eightys_style6077 3 года назад

@@QuickAndEasy5MinuteAppliance idk, my pedal goes right to the floor when running, but there's abit of pressure when the key is off

@jeffreyrstapler 2 года назад

I have a 2007 Chevy Work Truck. My A/C want blow when my brake lights are on in the dash. Do you know what might be wrong? When the lights go off, the A/C blows again. The first light that came on in my dash was airbag light.

@QuickAndEasy5MinuteAppliance 2 года назад

There’s a corroded ground bolt somewhere.

@kurtelliott1987 8 месяцев назад

2001 GMC Sierra 2500HD Duramax. Had the Brake and ABS lights coming on together for past couple years, most of the time, but not always. The issue seemed to get worse over time. Scanned and found an ABS code for the ABS module. I tried cleaning the ground, but that did not work. I removed the ABS module, opened it up, and re-soldered the main connections (power and solenoid coil connections). Lights have not come back on since the repair. Appears as though there was a cracked solder joint, and reflowing the joints fixed it.

@QuickAndEasy5MinuteAppliance 8 месяцев назад

Wow, Great info. Kurt😊

@gerlandkent6377 Год назад

Thank u

@QuickAndEasy5MinuteAppliance Год назад

You’re welcome 👍

@walterkersting9922 Год назад

I replaced everything in the front end, including rotors and pads, tire rod, ends, ball joints, upper and lower control, arm, bushings, idler arms, a steering rack, a new instrument cluster, and the brake light was on. So I looked up how to reset brake pad, life and you mentioned that the parking brake might be on a little bit and guess what it was. Now everything’s cool thank you!

@QuickAndEasy5MinuteAppliance Год назад

Awesome Walter, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: ru-vid.com/show-UCGpInAejvpfVVE4FHB_L-Dgjoin

@davidmorris4311 11 месяцев назад

I put the ebcm from my 2003 in my 2000 which had a 0251 code. The codes went away but the abs light still stays on even with no codes thrown. What could this be?

@QuickAndEasy5MinuteAppliance 11 месяцев назад

Hey David, Maybe the ground shown in the video just needs cleaning 👍

@LLStacheLarry 2 года назад

I just looked it does need cleaned and the bolt is gone.

@georgeeinish6548 Год назад

Braking system baking what is it

@mikeadams4946 2 года назад

ABS light and Brake light both are on in my 99 Silverado. Tried cleaning the ground good, but they’re still on.

@QuickAndEasy5MinuteAppliance 2 года назад

Shoot, can you try it once more? How does the brake pedal feel?

@db65559 2 года назад

My brake light isn't coming on when I press it in most of the time. Could that be the same issue or something else?

@joleaiperlis5347 8 месяцев назад

Did you ever fix it??

@bubblez9104 2 года назад

My brake pedal isn’t hard, my dads said he’ll need to flush sometimes to get the air out so could it be just that?

@QuickAndEasy5MinuteAppliance 2 года назад

That does sound like you have some error that’s leaked into the brake lines. It would be good to flush out all that error in add new brake fluid. The question is how did air leak into the system?

@bubblez9104 2 года назад

@@QuickAndEasy5MinuteAppliance we changed the back purge break thing as well was front calipers so that’s probably why. But ever since I commented i haven’t had indication pop up.

@JeffGatewood 2 года назад

Yeah so I would like to know if your lights ever came back on after this. When my lights come on I can turn the truck off and restart and they will go out but eventually they come back on.

@QuickAndEasy5MinuteAppliance 2 года назад

Mine did the same. Cleaning the ground fixed it👍

@marksd5650 3 года назад

Excellent

@QuickAndEasy5MinuteAppliance 3 года назад

Thanks Mark😊

@sefateppe8954 Год назад

have a 2003 model hummer h2 fault light is on but there is no error code in OBD device

@QuickAndEasy5MinuteAppliance Год назад

I bet it’s due to this bad ground 👍

@victoryfirst2878 11 месяцев назад

How many years did GM attach the grounding bolts at that location Sir ???

@QuickAndEasy5MinuteAppliance 11 месяцев назад

I’m not sure, Seems like not the best place due to corrosion from the road.

@victoryfirst2878 11 месяцев назад

I totally agree with you Sir. YOU would think better thinking would of happened. @@QuickAndEasy5MinuteAppliance

@RicoandFamily 10 месяцев назад

On my gmc the both lights came on and last night thank god I was parking at home and my break peddle hit the floor and i now see that the driver side rear wheel has brake fluid all over it, is it an easy fix ?

@QuickAndEasy5MinuteAppliance 10 месяцев назад

That ones is a bit tricky. I wonder if the brake line near that wheel has a crack? Good thing you were just parking.

@RicoandFamily 10 месяцев назад

@@QuickAndEasy5MinuteAppliance yes it does and the line is on top of the frame behind the wiring harness but underneath the body and it cracked right at the clip to hold the wire and line in.

@QuickAndEasy5MinuteAppliance 10 месяцев назад

Gotcha, Sounds like it’s time to order that whole brake line part, then install it, add new brake fluid and bleed the brake system of all air bubbles👍. Your GMC dealer should have that break line on hand.

@RicoandFamily 10 месяцев назад

@@QuickAndEasy5MinuteAppliance thank you I’ll order it right now

@marinevetgarage9101 2 года назад

Thanks for the video. Unfortunately didn't work for me.

@QuickAndEasy5MinuteAppliance 2 года назад

Thanks for trying. Might be good to have the dealer check the brake system.

@yota87truck 2 года назад

VarineVet Garage this ground cleaning worked for me. But then the next day I was back to a no crank no start with the same 'Service Brake System' error. Did you ever find out what was wrong with your truck?

@marinevetgarage9101 2 года назад

@@yota87truck yes. After I went through all that trouble, it ended up being my brakes. I replace my rotors and break pads and the issue went away. I would start by checking your beak pads

@jessedukelacrosse6470 9 месяцев назад

Cool , my truck does that , a/c will not work while those lights are illuminated, turn off truck , turn back on and everything back to normal

@QuickAndEasy5MinuteAppliance 9 месяцев назад

Nice job👍

@eminemd1274 2 месяца назад

Yeah my brake fluid was empty😅✌

@QuickAndEasy5MinuteAppliance 2 месяца назад

I’m glad you checked it👍

@Dro77080 2 года назад

Did that but lights dint go away

@QuickAndEasy5MinuteAppliance 2 года назад

Might actually be a problem with the ABS brake system.

@ivanayvar Год назад

I have a 2000 Silverado but only has one wire..

@QuickAndEasy5MinuteAppliance Год назад

Thank You So Much for A Great Question.👍 Can you send that same question to my email at: scottthefixitguy@yahoo.com I’d like to offer You Our Channel Membership That Gives You ✨LIVE HELP ✨With Zoom or Texting or FaceTime. Click Here To Join: ru-vid.com/show-UCGpInAejvpfVVE4FHB_L-Dgjoin Thanks Again, Scott

@donaldcinkan7878 3 года назад

I changed out the abs module and the lights still on

@donaldcinkan7878 3 года назад

Clean the grounds also

@Realtrainhorns 2 года назад

Try the brake fluid level sensor, I just wiggled mine around and the service brake system light went off.

@knownasgen Год назад

I mean even if you decide not to do anything. It won't hurt nothing. It's just annoying to see it on.

@QuickAndEasy5MinuteAppliance Год назад

It usually works 😊👍

@DanA-nt2xu Год назад

Work perfect...after a shop charged $85 to say brakes are fine it must be a bad sensor!

@QuickAndEasy5MinuteAppliance Год назад

Awesome, Thanks Dan😊✨

@omegaman7241 2 года назад

that's a clean truck. where are you?

@QuickAndEasy5MinuteAppliance 2 года назад

Thank you, We’re in Pinole Ca.

@TheSleepingonit 2 года назад

My brake warning light flashes and beeps constantly when in motion

@QuickAndEasy5MinuteAppliance 2 года назад

Can you send this same question to my email so I can help you? Scottthefixitguy@yahoo.com

@raulgarcia4893 3 года назад

Hey man, its happening to mine has it ever came back on

@QuickAndEasy5MinuteAppliance 3 года назад

It did when I went through a powerful car wash.

@QuickAndEasy5MinuteAppliance 3 года назад

Then the lights went back off again

@juanespino4964 3 года назад

Mine turned on after it snowed.. could that be reason it’s on?

@QuickAndEasy5MinuteAppliance 3 года назад

Highly likely that the salt used to curb the snow problem has caused corrosion on that ground wire below your GMC. I would pull that wire and clean all the corrosion really well and I think the problem will go away.