👀 MILWAUKEE vs DeWALT Showdown, Which One DOMINATES!? 

😂 just embrace it! Thanks, I appreciate it!

Same 😅🥹

Sounds like I need to do a video on that!

Not only that, but how fast they charge is just as important sometimes

I’d be more focused on how long they last, as in years before they fail

i agree - how good the battery is so important

Personally, with both Milwaukee's XC batteries and Dewalt's XR batteries, I've found charging to be almost an afterthought even in a professional setting where I'm slamming screws for 8 hours straight. I would at most need two to stay busy, because unless I was just holding the trigger full-time, I'll never burn through them faster than they charge. This even goes for my Milwaukee chainsaw; I worried I'd need more batteries to keep it running, but keeping one on the charger is pretty sufficient. Sometimes I have to take a 5 minute break to let the charger catch up... Dang. Lol

Smart man! 😀

I will admit Milwaukie has great tools however their batteries are junk !

Ve dewalt daha ucuz

Same 🎉

Interesting, thanks for sharing. Both are great, it just depends who you invest in at first it seems

Same here my old lead used DeWalt so I started there, company standard is Milwaukee.

Brother been in the game since when Milwaukee used the old battery’s and I had to switch the triangle batters am old and I got the the impact the old one old with the new battery just the first version that ever used that battery type

I believe that is the 887

You know your tools/model numbers well! 👍🏼 thanks, I don’t think every review needs to be the cutting edge technology, contrary to what the internet trolls say lol

Thanks, we have a blast ribbing each other! 😃

I can honestly say it's like that on a job site too. I'm a DeWalt guy, and have worked with Milwaukee and Ryobi and Craftsman guys side by side. It's always just busting each other's balls over price vs efficiency, and ultimately who finishes the job quickest. Hard to call it "work" when you're having fun playing with big boy toys lmao. I'll die a DeWalt guy, and will always buy Black and Decker products for the house.

Nothing beats good friendly banter amongst friends, family, and co-workers!

an honest blooper! 😆

😀

Very possible.

Yup I agree. That's Not a bad idea... I love dewalt 20v but Milwaukee way ahead on 12v tools.

Alright, come to the good side of power tools! Lol i'm curious what to drills you use that made you change your mind?

Shoot, thanks for your kind words!! 🙂

Actually I think they screwed it?

Nice, As you buy more and more DeWalt tools, I think you'll be very pleased

@@HandymanHertz Lowe's had a good sale going on, and a steal on a kit, so replaced my "MATRIX" with deWalts.

Good point 👍🏼

That’s a good point

I Totally agree, my dad had dewalt so I thought it was the best growing up! Kinda like ford and Chevy pickups ...both great, but what does one prefer or what does their dad like?

Yeah!! 💪

You’ll get a lot of opinions here…but I’ve always been a dewalt guy. Seems like they have the best quality:price ration for people who use tools frequently. Milwaukees good? And a lot of ppl like makita. If you don’t use tools much , ryobi or a lower tier rigid would be more than enough for ya.

Hey thanks!

In my opinion, best value is not a brand. It all depends how much you use them. If you use them a little bit, the best value is not the best and most expensive tool. But, my opinion, the rigid and kobalt brand would be a solid choice. I would call them midtier with good warranties. If you don't use a much you can get away with Ryobi or craftsman. You get what you pay for, so it all depends on how much you use them. What brands do you have over there for options? To be honest, I would wait for a really good sale and buy a good brand, but that takes work and diligence. Also, buy them in multi tool kits (preferable on sale) instead of bare tools to get the best value.

I agree, I wish we had one to run it against!

Haha well, stay tuned, I’ll be having some drill and maybe a chainsaw (d vs m) coming out soon!

Oh and blower, too! Going to shoot some pickle balls out of the ends of them 👍🏼

I agree, but guys love racing things. In our nature.

Milwaukee is nice, but it does seem to be overpriced.

👍🏼

Dewalt!! 💪🏼

Dewalt does seem to be a lot cheaper

Why is that?

@@HandymanHertz Thoughts on the Mikwaukee brushed 2407-20 power drill?

I agree. Although, when you get into the trades or when time is money, you dont want different brands and batteries and chargers. So, one wants to get their power tool platform right from the beginning.

👍🏼

Fair enough!

😂 Yeah, I agree, both are great!

Why would that matter?

Gravity baby, letting the tool do the work for you.

@@HandymanHertz It matters because having the screw go at a 30 degree angle means it has to go through more material.

@guardian8319 😂 please explain to me how a screw can screw in MORE than the length of itself when at an angle....cmon man 📐

yeah, true. Although, i've wondered how much, if any, it actually matters. ill leave that up to a more scientific testing channel

The dewalt has a nominal voltage of 18v, the same as Milwaukee. It’s more of a marketing tactic Dewalt does.

👍🏼

Maybe Milwaukee owners have their heads screwed on a little crooked? Haha

They were made at the same time. They were the flagship impacts from both brands at the same time.

dewalt for Life !

I’m not familiar with Milwaukee sorry.

I'd agree with you, but then we'd both me wrong :)

Price?

Oh yeah? Havn’t quite bought into the hype yet. What do you like about your flex?

@@HandymanHertz i like the batteries and power output. But they are missing too many tools in their line up for me to even consider switching to Flex. My next drill will be a Flex but my milwaukee doesn't want to die so that wont be for a long while it seems lol

I don't think that really has much of an Impact from a physics standpoint, do you? (Pun intended)

Yeah!

You don't honestly think that really matters much from a physics standpoint, do ya?

I totally agree! I did not know Black & Decker also owned Mac, that’s really cool! 🇺🇸

@@HandymanHertz they are all Under Stanley Proto too plus many more

@@benmartin6476 i love American made stuff 👍🏼

You betcha! 👍🏼

Nope, not the surge.

@@HandymanHertzit’s the old generation two. Probably just as bad and as of 9 months ago, not their flag ship.

A drill wouldn’t sink down one of these lag screw all of the way. Aren’t you aware that impacts have wayyyy more torque than drills? You should look up the specs or do a real life torque comparison. Let me know your results.

@@HandymanHertz I'd say I've done one or two. I work a construction job where we each buy and supply our own tools, I've seen the specs and used multiple generations of pretty much every tool line out there. Professional-grade drills (pretty much anything in the 18-24v range) dominate at lag driving. Zip them down tight in about 5-6 seconds. I can explain the discrepancy between the numbers and the reality, though: An impact may measure over 1500 in-lbs of "peak torque," and its drill counterpart may measure in the 1200 range. But an impact is only generating that torque instaneously when the hammer inside impacts the drive shaft, and then it's spending most of its time generating little to no torque while it waits for the hammer to smack again and give it another 1/60 of a turn. While it's doing that, the wood fibers which flexed around the lag are springing back, pulling the cutting threads away from the fibers they just cut when, and pinching the shank and threads in place, meaning a lot of the next strike is going to be required to break the lag free again, and what little inertia is left will make inconsequential progress on any given strike. A drill is generating well-over half the instaneous torque, but steadily. So if it goes forward 1/60 of a turn, it's immediately starting the next 1/60, and the wood fibers we've cut are retaining their orientation down-cut on the threads, letting it pass much more smoothly, because the force hasn't let up yet. The only time it'll spring back say, 1/120th of a turn, is when it's sunk or you stop halfway through driving it to adjust your grip. Granted, this is also why they break people's wrists, but if you use them right, they won't do that either. I've driven thousands of lags and never had an injury from it except maybe slipping off and punching my workpiece, getting a little skinned knuckle or something, which I also do with impacts, lol

@@Disktoaster sounds like I need to do a race 😊 the proofs in the pudding!

Haha yeah it's funny but it's a guy thing. My daddy can beat up your daddy, Chevy vs ford, John Deere vs case, iPhone vs Samsung, etc.

I think it has to do more with rotational force than downward force, right?

I don’t see why that matters one iota 🤷🏼‍♂️

@@HandymanHertz wow hit a nerve I see, so leaning doesn’t allow the same inline force to be applied to the screw and you can hear the tip slipping because of the misalignment. Stay safe and have a great day.

@@danthebeeman no nerve struck, you just have read that in a different tone than I meant. I just disagree from a physics standpoint is all. 👍🏼

haha true, true. Some of their stuff is so ridiculous. Good brand, but bad value IMO

Yeah you’re probably right! Only think I don’t like about the switch is dirt and drywall dust can get packed in the over time.

Not sure that matters much from a physics stand point. It still goes in the same distance.

Maybe, but I don't see from a physics standpoint where that really matters?

You betcha!! 💪🏼

👍🏼

It’s like ford vs. Chevy: There will be no end. 😃

??

Yeah, but Once a lag bolts threads grab, its hard to direct it.

I sure do love my dewalt tools 👍🏼

Agreed! 👍🏼

👍🏼

Thanks, I'm not sure, I've never heard of Tylertube.

@@HandymanHertz lol

It’s elk

This has got to be one of the most laughable and untrue comments I've seen on my videos.

Yeah, Maybe. Although I'm not really sure how from a physics perspective.

Sounds like you don’t have any experience with tools. Walmart Hart brand is not equal to Festool. Just as Jaguar reliability is not the same as a Toyota Camry. Don’t believe me? Go look at resale value, reliability ratings, and reputation. So, they are all not the same.

Man I'm so sick and tired of dramatic jerkoffs in the RU-vid comment section.. Who was screaming in this or any videos? And why the fuck would you be watching these videos?

Interesting, is this from testing or from experience?