🔥 The ONLY Way To Install Vinyl Wall Base 🔥👺 Assuming You Want To Survive The Nightmare 👺 

Yup, I wish EVERY instructional RU-vid video was like this. Quick, to the point, no stupid 40 second intro, no bad music, no pointless drama or storytelling. This is the good stuff! Now, tell me what that knife is called and where I can get one! Thanks!

Why is every other video 5 minutes longer? This gets to the point and explains what you need to know. Awesome. Thanks for the video, my garage looks great now.

I am installing wall base tomorrow, thank you for this straight to the point vid...no science, just get it done.

thank you very much! I am a elder woman working to get every corner of my old house clean and livable/lovable and easy to clean. .

This is easily one of the best tutorials I've ever seen. Thank you!

Thank you! I wish all tutorials were done like this, simple and right to the point, good job 👍

Totally agree with prior reviewers. Straightforward and comprehensive without waisting time. Thumbs Up!

Bro, this video is PERFECTION. I have NEVER installed wall base a day in my life, I followed your instruction and my building looks amazing!!!🔥🔥

Don't ever stop making videos let this be the norm for an instruction vid

This is GREAT STRAIGHT TO THE POINT VIDEO!! 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾 very informative THANK YOU!!!!!

Straight to the point. Now that's how you get her done. I appreciate you not holding back the tricks of the trade

Wow - that is SO much more straightforward than the directions on the packages of cove base!! Seeing it done is worth a thousand words - ALL instructional youtube videos should be this to-the-point and well shot - some of them have good info but the video is so bad it's useless. Not this one! Thanks a million - this makes is a whole lot less intimidating to do!

Many thanks, I’m doing this for a friend tomorrow and have never done it before. 3 minutes later and I have all the confidence in the world. Great job!

I will be replacing some highly amateur wall base I installed about 10 years ago, and I only wish I had seen this tutorial before that first attempt. Thanks!

Liked bc of the short video. Straight to the point

The glue spreads more even with a base adhesive nozzle and you don't have to keep going back and forth I some time do my outside c corners one pice like u did depending on the kind of wall but more then often after time your corner is round at the top or off with your notch if u notch the top so I make two pieces and scribe one side with a vyinl tool divider, and it's a perfect corner and it's just as fast or maybe faster for some people your outside corner looks ok but I always see you tubers useing a carpet blade that's awesome cause I only use a utility knife, sheet rock knife it's easier to mark the corner and I scrape the wall and Mark it at the same time as I run my blade against the wall for my scribe line

awesome video brother been a carpenter for 30+ years and need a reminder every now and then. Thanks again

dude... this vid helped me so day-uummm much you dont even know. thanks for shooting the tips only a pro would know. you are the man, peace CEB.....

Easy instructions and straight to the core. Wish all tutorial videos were as cool as yours man, thanks! 👊🏻👍🏻

Thank you, no bs , straight to the point!

Wow! To the point ,concise and chock-full of very useful information. Thank you!

great stuff: your speech cadence reminds me of the guy from 'gas station encounters'

I just recently started doing this for a commercial contractor I’m working with. He showed me how to do it in a few minutes and I’ve been doing it ever since. I’m a drywall contractor but hey if I’m taking down walls I’m also replacing the rubber base as well now! And the contractor couldn’t be more happier.

Thank you for such clear and concise instructions. I watched your video yesterday morning and then installed rubber trim for the first time in our kitchen with so many funky corners. It looks great and was so easy. Thank you!

Good video. The guy who installed my cove base had some special skills. Like computers and model trains. But not cove base. So tore it off and did my self after this informative video

Thanks for this video: informative and to-the-point. I had a new garage floor installed recently, and wanted to apply some gray cove base along two sections of drywall to give the garage a nice, finished look and keep water away from the drywall when I clean the floor. The finished product looks great. Your video helped me make short work of the job.

Boom, boom, boom, you are very good and thank you. Why are there no longer professional tradesmen as you are, here in Brooklyn, NY, who we can call to do such jobs in our homes as years ago? I would call you in a heartbeat. Thank you, David.

This is great of you’re in a hurry and don’t care about perfection. But if you want to do a any job, you’ll watch several videos to make a determination as to what’s important to you. Other pro’s will scribe the corner, trim each edge (basically like here, but more precisely), and hot glue that corner to keep it from puckering until the adhesive takes hold. And that’s why other videos are longer. But it’s up to you. Certainly this is good enough for many. Just my two cents.

Short and sweet. Thank you for a great video, loved it!

Dude. Thank you so much. Love the channel wish you the best. Awesome videos man.

Just finished adding vinyl wall case to my garage for the very first time using these tips. Didn't turn out all that bad. Not as good as this but it was definitely much easier with this guide.

Get yourself a 3" base tip from literally any flooring store. you've got a boat load more adhesive then necessary.

Got my base ordered for pickup and gonna tackle this over the weekend. With this basement remodel DIY I have had to teach me self how to build walls, how to hang and mud drywall, how to run electrical and how to paint walls so they don’t look like crap. Down to the last few steps now and hoping I can get this down as well.

Amazing how the best help videos just get right to the point a show the work. Also like the let's do it twice to really detail the technique.

Use the right snozzel for this application. You won't have glue coming up out the top. And it's an even application so you don't have uneven glue telepathic through your rubber base.

Thanks for being so quick and too the point! I'm handy enough but never used this stuff. Answered the two questions I had right off the hop. Thanks!

that little slice at the top of the outside corner would bug the hell out of me but other than that, flawless.

Don’t know if you’ve made a video on this yet but when you’re using a roll how do you properly measure to get your corner? Perfect. I may be overthinking this.

So helpful. Thank you for taking the time to share your wisdom!

Wow dude! You are the bomb. This is the last part that I have to finish in my bathroom and you made it so easy. Thank you for your expertise!

Excellent, fast paced and informative, Just what I needed! THANK YOU!

Everything I needed to know. Inside corners and outside corners. Straights I can figure out on my own. Excellent bideo

Nice ive never seen inside corners done that way, the dudes that taught me would just butt them tight after 45-ing the other peices bottom corner

I have to do 30 to 40 units of this crap 🤬 I’m a flooring installer but wasn’t too sure how to do corners. This video was helpful. Thanks!

Nice tutorial man, quick and to the point. Wish others would follow this format!

This is how we rush thru peace work to make a fast buck. But for my installation we always push the toe down especially at outside corners with contact cement to hold the profile on the toe wrapping the said corner.

Thank you for the easy how to video. This makes it very simple to make those cuts. Fortunately we only have inside corner cuts.

Thanks Mike outside corners give me a headache you make it look easy

I hope you still monitor comments/questions on your older videos. I want to install a cove base in my garage. I never noticed that the concrete is higher as it approaches the garage door and is well over 4 inches. This changes everything! How would you recommend installing that will still look nice without using cove base that is extremely tall in height?

Michael! Your video is a FANTASTIC help. Thank you!

I love how I’m sitting here on someone’s job watching this dude because I have no idea what I’m doing

Thank so much I was almost there just didn't shave the corners off alittle

But on the inside corner it went down and bent onto the floor and on your outside corner it just goes down to where it touches the floor

I do not know much about this, but there must be a way to install vinyl wall baseboard without having to use glue. I am thinking maybe some sort of decorative moulded flashing, batten, etc made of wood, metal or vinyl which is then nailed/screwed to the wall that goes on the top of baseboard & then you just slide the top part of baseboard underneath it & there you have vinyl baseboard that can be easily removed when wall repair is needed & you do not damage the wall base nor the drywall. Then at inner & outer corners, you could put a couple of brads on the vinyl itself. Whatever the case, there must be a way so that the vinyl can be used over & over again when repair is required inside the wall & you have to remove the baseboard first. 01/02/24

Great Job! Simple & direct. I appreciate the short video. Thanks

Great job. Clear, concise and straight to the point.

Thank you,my dude. Right to it, clear and concise. 🙌

Great video! Straight to the point; absolutely wonderful! Thank you!

I never cut the top on my outside corners. I mark the backside with a pencil and stay about 1/6" of an inch from the top then scribe the back with a razor knife. 20 years in the carpet and tile biz.

Thank you for your tutorial. 👍🏼You also did a great job on your video. Thanks again.

I like this it's like he's off to the next job

Thank you very much I tried your methods today and worked great!!

Well done, no BS straight to the point.

Where are the 17 minutes of background and history of the flooring/carpet industry? I want my money back. Seriously though, great video. Thank you!

huge thanks! you explained perfectly and made it look simple

Thank you for letting me know about the other adhesives you can use!! Thought I messed up getting liquid nails. Lol.

Thank you. Very articulate and concise.

I love the look of this. Might replace my existing molding with it

Thanks for this! Just did it last night and worked great.

I do outside corners the same but I stretch the toe so it lays flat around corners. great video though.

This is a great explanation. Well done. Thanks

Great video, short and sweet. Too bad I installed some vinyl cove base THEN watched this. Grrr. Oh well, the rest of the job will look good!

Excellent video! You make me feel like I could do it!👍😊⭐️

thanks man this really would have been a nightmare without your help

Thank you for this great video! Can I use this vinyl wall base for tile floor?

Super video Was a lot of help got the cove installed perfectly subscribed

What I really need to see is what size of triangle to cut out for the bottom edge on inside corners.

Alhamdulillah Thank you brother. Now I can finish my basement

Awesome quick to the point thank you sir

Very informative and funny but how, and what paint do i use to paint my existing moldings??

Thanks for the info man!!! 👍🏼👍🏼

Cove base always shrinks so never use 1 piece corners unless you want them to all pop. When your cutting a 10' wall your peice will be almost 1/4 long and you cram that thing tin there and that ensures that nothing pops.

Excellent video… However the only thing you didn’t really cover is if you have to align one piece of cove base to an existing piece of cove base… for example you’re replacing a section and you have to get it to seem perfectly with the next piece and perhaps that seemed lies either in the center of a section or on the inside corner or the outside corner… Those are exceptional cases but it would be nice to cover those as well. Otherwise great video.

Really good video - right to the point. What adhesive would you recommend?

What’s going to happen to the wall when you need to take that trim off to change out the flooring?😊 Does it pull off clean?

hi excellent video thank you, for a bathroom would you caulk under the lip part that sits on floor to stop water from getting behind or under wall?

Great job explaining this, thank you sir.

Awesome! Just what I was looking for! Thanks....

How do it get it to stick while the adhesive dries(24 hrs)? Nobody explains this; and it’s always perfect when you initially place it? It looks like it’s painted on. EVERY time I try, it doesn’t stick. I don’t have the time or energy to sit on the floor and do 1ft at a time. I’M OLD! It’s simple if you’ve done it before.

Very good and clear explanation. Thank you.

Please can you share what that hand tool is that youre using? its awesome!

Is the self adhesive stuff good? Like the peel of sticker kind. I don’t trust it buts it all the white the store sold. What if I use the a trigger gun adhesive to the back part where its sticky? Will it work with the sticky too?

Very informative and to the point. Thank you!

You save the night bro straight to the point I love it sub and like kepp it straight to the point TRUST ME PEOPLE LOVE IT NOT JUST ME

As somebody who has never done anything like this before...... I bought a 100-ft roll instead of a 25 pack of 4 ft...... Do you recommend cutting it into smaller strips? Or should I try and do as few seams as possible?

My first time installing vinyl base board. We have been looking at self adhesive vinyl in 25 ft rolls. Would this be to difficult for first timers as we know once pushed on its on🫣🤔

I am going to do my garage. How to I transition from the stem wall to the garage floor? (about a 2" step)

Yep, nice show... watch that artery when pulling the blade to you.

Thanks bro, I bought a topset gauge for this but I clearly don't need it!

Do you have any advice on .125 vs .08 thickness vinyl? Pro's and con's of each would be fantastic, thanks!