How To Install Baseboard - THE EASY WAY!

Подписаться 562 тыс.

Просмотров 293 тыс.

50% 1

In this video, I will show you how to install baseboard. Baseboard installation is a typical DIY project that most anyone to do. I show how to do inside corners, outside corners, returns, and much more. The baseboards installed in this house are primed pine.
My Favorite Tools And Supplies 👉 www.amazon.com/shop/theexcell...
Tools And Supplies Used In This Video👇
Miter Saw amzn.to/3Vp48cH
Miter Saw Stand amzn.to/3FTjyjJ
Coping saw amzn.to/3WFR5o1
Rigid Straight Finish Nailer amzn.to/3GgInHr
Milwaukee Tape Measure amzn.to/3Gicy1d
🟢 Become a channel member:
/ @theexcellentlaborer
🔴 Subscribe to this DIY channel: ru-vid.com...
🔵 Subscribe to my personal finance channel: ru-vid.com...
🟡 Check out my Amazon store: www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that helps support the channel at no extra cost to you)
Timestamps
Intro 00:00
Starting A Room 00:35
Joining Two Pieces of Base 02:22
Inside Corner 08:12
Coping Base 09:26
Outside Corner 11:56
Return Base 14:17
Caulking Base 16:20
Filling Nail Holes 17:43
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals.

Хобби

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 188

@J_TRAIN Год назад

Straight forward. No wacky music or corny stuff, and a good guy! I like all of it man!

@TheExcellentLaborer Год назад

I try to keep my videos just as you described. Thanks for watching!

@pbrown6097 12 дней назад

As a person who has a hearing problem, I like that you did not have music or other background noise. Thanks it was a very good video and also your voice was easy to understand.

@TheExcellentLaborer 12 дней назад

I’m glad I made this video very informative and helpful for you. You are welcome. Thanks for watching!

@denniswilliams2385 6 дней назад

Coping is the most difficult thing for any homeowner to master however once you get it, your work will look amazing.

@chocluva2678 3 месяца назад

This has to be the most informative video I have ever seen! Straightforward and simple. 👍🏼

@Maplenr Год назад

So glad to have found your channel. I've got a baseboard project on my 100 year old house soon, the old base was painted 4 or 5 times and is looking rough. Lot of good tips here

@JohnFixes 10 месяцев назад

Nice work! This gave me a lot of info that i needed. One time-saver idea I saw on another video that you might consider is mitering the straight part of the trim and then stopping the cut before coping the rounded parts.

@neweverymorningmercy3491 8 месяцев назад

I feel more confident tackling my trim now. Very clear explanation. Thanks!

@NanaStillLearning 6 месяцев назад

This is the absolute best tutorial on installing baseboard. Going to check your other videos out to see what else I can learn.

@TheNovaNorm 3 месяца назад

Wow. That was much better than the really crappy way I have always done it. Luckily, I was only doing it in my own house.

@aaudain1 Год назад

This what I like about your channel no loud 📢 music and noise in the background

@TheExcellentLaborer Год назад

I have learned through trial and error when and when not to use music. My audience is quick to let me know when the music is too loud lol. I’m glad you like the channel. Thanks for watching!

@aaudain1 Год назад

@@TheExcellentLaborer 💯👍

@yourmasterrenovator86 8 месяцев назад

I've done this a lot (except the return bit at the end) BUT I gotta tell everyone that, this video is probably the most thorough one ever. As in every single word and sentence that you said had a brilliant point. I mean every word. Very well done 👏 Thanks

@BrynnCarrollARTIST Год назад

I am a DIY'er who recently found your channel and have already learned so much! Thank you for straight forward videos. More woman are tackling larger projects and your channel has been helpful for me to gain the confidence to even try!

@mdpfishoh1516 4 месяца назад

This weekend will be my first time doing baseboards. You make it so simple to understand. Thank you. I feel like I'm prepared now !

@SidneyDiongzon 5 месяцев назад

Dude thank you so much for explaining SO SIMPLY on hose to install baseboards! Definite sub from me!

@georgegrader9038 5 месяцев назад

Cool man. Been doing it off and on for 40 years. Great instruction !

@rogerbarrios8614 5 месяцев назад

Your video just popped up on my home page. I’m not even doing a project but watched it any. What a great video. I wish I had this when I was doing a project. You covered everything. Thanks for taking the time to share your expertise.

@joemd7775 2 месяца назад

This video is a treasure. Thank you so much, it's a great help!

@cetroyer Год назад

Thanks for your videos. I'm working on making a home office out of a shed and I've learned a lot.

@TheExcellentLaborer Год назад

This should help you a lot in your home office! Thanks for watching!

@meatman3042 6 месяцев назад

All my questions answered in this video ! Great video thanks

@TheExcellentLaborer 6 месяцев назад

Great! I’m glad I can help you out. Good luck with your project!

@j.jalvarenga2380 Год назад

Thank you for your content, it is very educational and I put it into practice in my work. you work very well and very clean. 😊🎉

@TheExcellentLaborer Год назад

You’re welcome. I do try to keep my job site organized. I’m glad you noticed. Thanks for watching!

@williambalicao8515 5 месяцев назад

Honestly just discovered your channel and it’s very informative and straight to the point. One thing I want to add is you can just use a stud finder to find studs all along your walls instead of having to pull and mark stud location. I find that it speeds up the process also, but other than that, text book information.

@OneShadow6029 26 дней назад

Wish it was more videos like this online. Thanks for this!

@elizabethmorgan2513 5 месяцев назад

EXCELLENT VIDEO for a beginner ( which I am!) You are a great TEACHER, explaining everything I need to know! THANK YOU. New subscriber now. Interested to see your other videos!👏👏👏👏👏👏👍🏻👍🏻👍🏻👍🏻👍🏻💪💪💪

@rickgoodwin2422 Год назад

Josh, Happy New Year! Your videos are so informative and a joy to watch.

@delta7087 Год назад

As always, another great video. I’ve learned a lot from you. Thanks!

@TheExcellentLaborer Год назад

I’m glad to hear this. I appreciate you taking the time to comment!

@DtKnize 9 месяцев назад

Fantastic! Thanks for your expertise.

@user-ji3tg3gr4g 3 месяца назад

Great video. I wish i would have known some of these ideas years ago. Thanks!

@grivoc Месяц назад

Really good work and lots of well thought out tips

@davidhutto3846 Год назад

Gluing joints and outside corners make for long-lasting good looking trim also a grinder works better for a cope but it takes practice.

@dankelley9361 Год назад

Excellent technique, explanation! You YT video are always exceptional!

@TheExcellentLaborer Год назад

Thank you Dan! I try to to keep the videos simple and effective. Take care!

@richardfabrizio8998 10 месяцев назад

You’re a true professional. Well done tutorial. Thanks

@TheExcellentLaborer 10 месяцев назад

I truly appreciate your comment. Thank you!

@everettmarshall3098 10 месяцев назад

except for no safety glasses. hasn't learned that yet to teach.

@dontraise 7 месяцев назад

All I can say is great video!!

@wadeanderson7959 10 месяцев назад

Great work and instruction

@Jeff82556 4 месяца назад

Great job. Thanks!

@robertwestover2125 Месяц назад

Excellent video! I learned a lot!

@rafaelparedes9189 4 месяца назад

great lesson thank you

@TheExcellentLaborer 4 месяца назад

You’re welcome! Thanks for watching!

@davidharrison3074 Год назад

It's so nice doing base and I have only coped inside corners on baseboard. It's so rewarding to see things flow around a room. Doing a finished reveal is also nice. I always glue that little piece on for a little bit and the finish look is always wonderful. I have also taken some sandpaper to round the small cut tip a little. I like the idea to crimp it. I'll have to try it. Thank you for this video and the detail. Have a safe New Year Josh.

@TheExcellentLaborer Год назад

It is nice to see the final touches such as trim in the room. The sandpaper trick is a good one! Are usually do 3 1/4” baseboard in the spec housesI build. This 5 1/4 inch was a little more difficult to get perfect but it turned out just fine. Thanks a lot for your input, David!

@charlesbryant219 Год назад

Great video. Thanks!

@TheExcellentLaborer Год назад

Thank you, Charles!

@lukiss01 7 месяцев назад

Thanks man. Great work

@TheExcellentLaborer 7 месяцев назад

Glad it helped!

@Newt5029 5 месяцев назад

Very Helpful!

@CodyWBrown Год назад

Thanks Josh!

@TheExcellentLaborer Год назад

You are welcome Cody!

@karyl372 2 месяца назад

Thank you so much!

@kiddhitta 8 месяцев назад

A tip for caulking, use both hands. Run your index finger behind the bead of caulk as you move along the wall. You'll get the perfect spread every time. You don't have to worry about applying to much them smearing it on the wall when you run your finger along the top.

@SuperJohnfoster 7 месяцев назад

Good job easy to understand

@manuelpalma6544 Месяц назад

Thanks Great videos body

@bongi.barber2823 Месяц назад

Thanks

@thesecondcomingisnear3538 2 месяца назад

Josh,your the man 👍

@jeffreycantrell1932 2 месяца назад

Josh, YOUR expertise is appreciated. YOU'RE the man!

@aaudain1 Год назад

Interesting thanks for sharing

@TheExcellentLaborer Год назад

Thanks for watching!

@Opreza12 9 месяцев назад

Very nice 👍🏼

@pumper325 Год назад

excellent. thanks so much. mega pro.

@TheExcellentLaborer Год назад

Thank you, Bill! I hope you found this video helpful. Stay tuned for more to come!

@jrmedias4252 11 месяцев назад

Great job sir

@TheExcellentLaborer 11 месяцев назад

Thank you so much!

@CivilianDan Год назад

Great info

@johnlennon1049 8 месяцев назад

Great video

@shahramsabernia8488 6 месяцев назад

You are awesome man

@russellwright985 9 месяцев назад

Thanks!

@TheExcellentLaborer 9 месяцев назад

Thank you so much for your support! It helps out a lot. Good luck with your project!

@georgemelo5326 7 месяцев назад

Thanks. Plaease make a video how to install crow molding.i like the way tou explain

@alextirabasso2441 Месяц назад

great info. I like the caulk technique too. Straight forward and positive. What about miter cuts at around 44 1/4 degree for inside corners?

@marcoantonionunez2626 9 месяцев назад

The best.

@geoffreydowen5793 3 месяца назад

im a retired carpenter from England, I see a lot of faffing about here . I would be gluing and screwing this onto the wall hand cut mitres too and a coping saw. no need to sand joints as these have glue on them PVA but yes, back wall first also if the external corner is not 90 you need to be scribing it . keep at it. you'll get it! nice presentation. two panel pins in mitres and glued! also.respect "chippy" 😊

@StyleRevisedByCstclair 4 месяца назад

I had no idea I had to look for studs, but a stud just told me so 🔥😂 I’m assuming all of this applies to chair rail too right? Just saw your squeeze the tip of the caulk trick. Brilliant

@chesthoIe Год назад

If this isn't the first search result for, "How to install baseboard" then someone is paying money somewhere.

@TheExcellentLaborer Год назад

Thanks a lot, Sean! I do put a lot of time to try to make my videos as informative as possible. I hope you found it helpful. Take care!

@chriscolameco6850 6 месяцев назад

There’s better trim tutorials. That’s how I feel about your electric panel video though. I upgraded a rental to 200 amp service and required the whole house with pretty much that video and two books

@sheribode4609 6 месяцев назад

This is very confusing for the very beginner.

@anns1171 2 дня назад

I'm a beginner and found your video the most informative and helpful. I have watched others that did not provide the extra tips or explain/show the coping details. Great job 👍

@rodolfovaladez1784 10 месяцев назад

Stud finder works well

@MAGAMAN 8 месяцев назад

Instead of marking up your baseboard, put a small piece of blue tape on the floor where your studs are.

@jasonscoggins01 4 месяца назад

@zlm2032 Год назад

Thanks for putting out this video. I will be using these tips to replace the old trim in my house. 👍🏻

@TheExcellentLaborer Год назад

That is great! This video will definitely help you do that. Thanks for watching!

@webtutorials4279 Год назад

Excellent video as always. Love its detail and camera angles.

@rowdawg12 4 месяца назад

Show us how to do round over corners in Arizona we don’t have straight corners in most new homes only round overs

@mikepool215 11 месяцев назад

Probably one of the best video I've seen so far. Thanks for the instructions.

@ComingAtYouBro 9 месяцев назад

In another scenario, i use 1 inches nails with a slight angle so it ''grabs'' onto the gypse as well as using pl glue. This way no fear of hitting wires and you can nail strategically.

@consumersgasman8376 8 месяцев назад

I use 221/2 rather than 45 to join 2 lengths, i think it looks better, less cut line shows on top

@Im_trending_today 4 месяца назад

Great video, I noticed that you did not leave a gap under the baseboard and some others do leave 1/8” gap below. Would a gap be needed on some installations due to expansion and contraction of the materials or is it ok to install right to the floor.

@kraenaj 7 месяцев назад

Whatre ur thoughts on 2p10 on outside miters? For better fit?

@davidbielski 6 месяцев назад

Grear video

@davidharrison3074 Год назад

I meant to say that when I cope the baseboard, after I cut the angle, I flip the base over and use the miter saw and set it at 15° angle and cut the straight part with the miter saw and only coped the detail profile. It gives you a real straight edge especially on the wider base. Coping a long straight edge it hard especially if you are working with oak etc. Just a little tip I meant to share. I'm sure you know what I meant. Give it a try sometime. 👍🏻

@TheExcellentLaborer Год назад

I know exactly what you’re saying! Yes, that is a great method. In fact, we actually do that as well. I could have thrown that in the video. Especially with this tall bass it is a lifesaver. Sounds like a good short video idea. I appreciate that David!

@gsftom Год назад

Was abt to watch yr latest vid and then noticed it was “upcoming”. Upcoming reminds me of “check is in the mail” or “I would gladly pay u on Tuesday for a hamburger today”.

@TheExcellentLaborer Год назад

Hey Tom! The video will be live 6 PM Eastern standard time December 26. I will be there to live chat!

@elizabethmorgan2513 5 месяцев назад

Forgot to ask, is a brad nailer the right tool to use for this project? (I’m a total beginner🤷‍♀️).

@RetrieverTrainingAlone 11 месяцев назад

Mud buildup on corners so inside corners cut 44 degrees, outside corners cut 46 degrees, CA glue for tight joints before nailing.

@narlycharley 9 месяцев назад

Here's a tip for anyone doing this. Do not use Alex Plus caulking. You want one a good siliconized caulk. A good budget friendly one that's SUPER flexible and adheres very well is Dynaflex 230.

@aaronmuse5263 6 месяцев назад

If you dont get the coping as much. Could i just 45 the corners?

@albertsalas9154 11 месяцев назад

Do you paint your base boards before or after installation?? Do you have a video on that??

@TheExcellentLaborer 11 месяцев назад

I painted them before and then I touched up after installation. I hope that helps!

@PeterBergeris 3 дня назад

Never saw with your right hand like you did if right handed. Hold with your right hand and use your left hand on the saw. Unless you want to cut into left arm.

@joewenzel5142 Год назад

Now I can see everything I did wrong when replacing all my baseboards by myself 4 years ago.

@TheExcellentLaborer Год назад

Hey Joe! I’m sure you did a fine job.

@chrisbargman9790 11 месяцев назад

@browndavon42 9 месяцев назад

@@TheExcellentLaborer😮😮😮😮😮

@brandonbell5357 8 месяцев назад

Best to have a helper I know it's hard to find

@jonhumphries26 Год назад

Really nice Job! Has the dewalt miter saw held up? I’m thinking about getting one.

@TheExcellentLaborer Год назад

Thank you! All jokes aside that saw been awesome! In fact, my dad and I were just talking about how much we enjoy using that saw. I have had it for about six years and have not had any problems with it. I hope that helps!

@jonhumphries26 Год назад

You cant beat that! That’s awesome, I’m definitely going to get one! We’re building a house now, it’s actually a modular we’re doing a bunch of the finishing work inside and I have really enjoyed your videos! Keep up the good work buddy!

@karyl372 2 месяца назад

Did you use 3 and 1/2” baseboards?

@bartbug1 Год назад

or you could just use a stud finder!

@SR71mydream 9 месяцев назад

Just use a magnet to find drywall screws

@randyatimi4511 8 месяцев назад

is the wall screeding or just painting alone?

@dennydeckerful Год назад

I always paint my caulk to encapsulate it.

@TheExcellentLaborer Год назад

That’s a great idea to give it a perfect luck! Thanks for stopping by. Take care!

@jerkyjake6271 Год назад

Is there a possibility of a sky light video in he future?

@TheExcellentLaborer Год назад

I am bound to do one in the future. I’m not sure when but it is a possibility. Stay tuned!

@WellnessUncovered Год назад

Measuring for Baseboards. Obviously you add up all you need. How much extra do you get to compensate for short runs/ waste? Or do you add up how many 12 footers you need then go from there? In other words, if I need 32' total, but some of that will be short pieces that need to butt up next to door trim and corners between 2 doors. How much extra should I purchase to compensate for the bevel cuts. Am I making any sense 😆

@TheExcellentLaborer Год назад

If you allow 10% waste I you should be fine. If you don’t have enough or buy too much, you can always go back to the store! I hope that helps!

@grantdubridge7995 Месяц назад

Doesn't the sill plate run the entire length of the base of the wall?

@jerryjuarez219 3 месяца назад

Do you need a nail gun to install the nails or could you hammer them in

@DavinderSinghDhir 2 месяца назад

Which gun are you using?

@adanr150 8 месяцев назад

How is a good way to charge a customer for a base board job. Per LF or ??

@Esiddik Год назад

Okay question. I tried coping and it was HARD!!! I will try again with your technique but what about PVC baseboards? Can you cope those?? And how do you scribe PVC ? I bought PVC because they are 8ft and fit in my car, I REGRET it so much 😭😭😭😭