Тёмный

🔧 DR350S Rebuild - ep.24 BST33 Carburetor: assembly 

Dawid&Marta's Moto Adventures
Подписаться 4,3 тыс.
Просмотров 15 тыс.
50% 1

This time we are assembling BST33 Carburetor - we changed almost all the parts excluding slider diaphragm only. Also we tested new way of making videos :)
PARTS:
I used "XU-07362" repair KIT. It contains almost all needed parts. Im not sure, but it looks like you can buy it on aliexpress for ~10$. Just search: "Carburetor Carb Rebuild Repair Kit Repair Accessaries For Suzuki DR350SE 94 95 96 97 98 99 Suzuki GS500E"
As far as i remember there was missing only one O-ring (you can see it at 1:00). I'm not 100% sure, but is was 10x0,5.
I also bought choke valve at aliexpress, look for: "Yecnecty Motorcycle Carburetor Throttle Valve Assembly Control Switch For Suzuki GS125 EN125 Motorbike Mikuni Carburetor Part" - only 4$
Also i replaced air/fuel screw to easy to adjustment one. Again check aliexpress and look for "CNC Easy Adjustable Fuel Mixture Screw Motorcycle Atv Dirt Bike FCR MX Carbs Carby Motor 4 Stroke Air Carburetor" - only 3$.
I used OLD diaphragm, It was looking fine. I bought one at aliexpress but it's diameter was much bigger...
if you enjoyed please leave a like and subscribe :)
Have a nice day!
All episodes:
🔧 Ep.1 Buying new motorcycle:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.2 - How to check ignition coil:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.3 - How to replace spark plug cap:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.4 - How to check power source coil:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.5 - How to check kill and ignition switch:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.6 - How to check pickup coils:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.7 - How to check neutral switch:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.8 - How to fix no spark issue + CDI replace:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.9 How to test engine compression:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.10 First attempt to start the engine and carburetor pulling out:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.11 Solving problem with the carburetor:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.12 First engine start up:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.13 Stripping down the motorcycle, Rebuild START:
• Video
🔧 Ep.14 Preparing motorcycle frame for powder coating:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.15 Frame powder coating and some painting corrections:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.16 Rear suspension linkage rebuild:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.17 Rear swingarm rebuild:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.18 Rear shock rebuild:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.19 Rear shock rebuild:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.20 Rear brake disassembly:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.21 Rear brake caliper assembly:
• 🔧 DR350S Rebuild - ep....
🔧 Ep.22 Rear master cylinder assembly:
• 🔧 DR350S Rebuild - ep....
Next episodes about DR coming soon :)
You can also visit our website:
dmmotoadventur...
Facebook:
/ dmmotoadventures
Instagram:
/ dmmotoadventures
#bst33 #carburetor #rebuild #motorcycle #DR350

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@andremajor2413
@andremajor2413 3 года назад
Marta I have to tell you all your DR videos are fantastic and have helped me out all sorts restoring mine.
@adamm8206
@adamm8206 Месяц назад
Very consise 🤩 THIS is how to make a detailed no BS video thank you!
@markjacobs2797
@markjacobs2797 Год назад
All I can say is thank you for a step-by-step and 360 view of all... 1996 DR350 E repair for a friend as a project, humbly,MJ
@javiergorgas4481
@javiergorgas4481 4 месяца назад
I loved the stop motion! great job, thanks a lot!
@Lunanzar
@Lunanzar Год назад
“Best carb video of all time” -Jason Mcginn
6 месяцев назад
This is awesome! Now I'm not afraid to take it apart, when I know how it goes back together again
@CashedOutCars
@CashedOutCars 4 года назад
Incredible video, showed me exactly what I needed. Coming from someone who makes car tutorials all the time this was very entertaining and helpful. Thanks!
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
Hi! I checked your channel and I saw DR350 there :D Enjoy it during quarantine :)
@KenHolmDK
@KenHolmDK Год назад
This video is absolutely fantastic. I am going to clean my carburetor for the very first time on my old Suziki GS500E and this will be a great help. Mine is a double carburetor, but the bits and parts are the same. Thanks 😍
@stdjunior
@stdjunior Год назад
Amazing Greetings from California
@elcucuy13496
@elcucuy13496 Год назад
Wow! Congrats on the patience and the great work!!! Very useful 😃😃😃
@szymix7815
@szymix7815 5 лет назад
Tak się składa że właśnie kupiłem dr do poprawek i fajny kanał, w dodatku Polski :D Pozdro :D
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
Dzięki! Powodzenia z DR, oby sprawowała się dobrze! My mamy wyjazd za 5 tygodni, motor praktycznie gotowy - tylko aktualnie mamy problem z popularną bolączką DR, czyli skrzynią biegów/sprzęgłem. Śrubka od bębenka kodującego biegi się odkręciła i wygięła się dźwigienka blokująca biegi. Do tego jeszcze podkładki i tulejka kosza sprzęgłowego do wymiany, bo były trochę wytarte. Na szczęście wszystko do zrobienia przez pokrywę sprzęgła i koszt części to 120zł ... tylko nadal brakuje dwóch części. Brak w magazynie EU i czas oczekiwania 3-21 dni :< Kurde!
@an3880
@an3880 5 лет назад
😊😊😊 That was very nice. I like the new style. Let that carburetor dance! 💃
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
Thanks! It looks funny on video when it's assembling itself on its own. It was only ~600 photos. I think next time I should make more steps to make video more fluent :) Definitely need to repeat this!
@miligen
@miligen 4 года назад
Amazing!!! Cool video. Thank you very much fo the manual!
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
You are welcome! I forgot, you can also check this page: www.thisoldtractor.com/dr350.html :D
@mikewilliams2373
@mikewilliams2373 4 года назад
Just what I needed...Great video technique. Thanks
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
You are welcome. It was funny to make video from photos ... :)
@jonsmith3723
@jonsmith3723 3 года назад
I have to do this soon. Thanks for an excellent video!
@jayceandjeremysadventures.4441
Very nice, definitely will be referring to that video in the future. Mine is supposed to have the stage 3 kit from DynoJet.
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
In this DR exhaust and airbox are stock - so I think these jets are also stock (stage 1??), but I'm not 100% sure. In future we want to change the exhaust and airbox ... so we will need to change jets. But now we have bigger problems :D
@jayceandjeremysadventures.4441
Dawid&Marta's Moto Adventures do the Jesse mod to your stock exhaust. It’s still quite just lets it breath more. Leave your Airbox, mine has a big hole under the seat and the air fliter get so dirty so fast. If you want pictures and measurements for that rack hit me up on Instagram.
@leonardocomes7585
@leonardocomes7585 2 года назад
Thanks for your videos Marta! It help me a lot to rebuilt my own DR 350 Carb
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 2 года назад
You are welcome :)
@travis8867
@travis8867 3 года назад
This video helped me a ton, thanks!
@Sigean11130
@Sigean11130 10 месяцев назад
Hi, thanks for the video. You show the little alloy tube projecting from the side of the carb nect the the brass link tube for the enrichener circuit being blanked with plastic and a zip tie. Why is this necessary? On my carb the little alloy tube does not connect to anything - it is "blind"!
@philippemauduit2163
@philippemauduit2163 3 года назад
Thanks for this really helpful video
@ThePirateRagnar
@ThePirateRagnar 2 года назад
how did you remove the pin holding the original jet needle in place? I can see that you use some plyers to press in a new pin, but the rebuild kit I have didn't come with a replacement pin and the old one looks like I would have to drill it out. Any tips?
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 2 года назад
This is old pin for sure, but I don't remember how I removed it, sorry :(
@berlum1
@berlum1 Год назад
Please can anyone help me. Martha attaches a clamped clear pipe to rear top of carb then a clear pipe to other inlet/outlet. Where does that second pipe go to? Is it just a breather/overflow? Mines dangling and I can’t see where loose End might attach. And why cap the other bit?
@trentondally3757
@trentondally3757 2 года назад
Where did you get the black adjustment screw that goes into the bottom of the carb 0:35 Mine fell out and I’m having a hard time finding the right one. Thank you!
@INFightko
@INFightko 4 года назад
Perfect
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
Thanks :)
@arek-krakiewicz
@arek-krakiewicz Месяц назад
Macie gdzieś linka do śruby regulującej skład mieszanki?
@thepowerofbeams4869
@thepowerofbeams4869 2 года назад
Siemanko, wlasnie skladam gaznik do Dr 250 BST33, i zastanawiam sie w jakiej pozycji ma byc pin od prowadnicy iglicy, poniewaz sama prowadnica ma nieco wieksze wycięcie niż pin blokujący, jak to ustawic montując?
@gustavbroinski5545
@gustavbroinski5545 5 лет назад
Piona!
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
LWG i piona :D
@cheba4786
@cheba4786 4 года назад
🔥🔥🔥
@szymon369
@szymon369 4 года назад
Czy kombinowaliście coś z alternatywnymi ustawieniami gaźnika? Zwiększona dysza główna? Customowa iglica? Lub jakieś gotowe zestawy Dyno Jet?
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
Wszystko jest jak w oryginale. Nie było tu kombinacji z wydechem ani z airboxem, wszystko działa dobrze na fabrycznych rozmiarach :) To jest motor do pyrkania a nie do orania :D Dużo ludzi poleca wrzucić mechaniczny gaźnik z pompką, podobno robi mega różnicę :)
@jonjones754
@jonjones754 2 года назад
Hi Both, I'm trying to add a comment to check what replacement air/fuel screw you used..I want to replace mine as I think the setting is wrong and will be easier to adjust with a long nurled screw...the bike starts from cold with no choke and is difficult to start when hot. I can't find an exact part that mentions the mikuni tm33 like yoyrs. Thanks in advance..hope this note doesn't get deleted.. Jon
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 2 года назад
This adjuster screw is from Keihin carb, but it works with Mikuni too :) I think it is this one: s.click.aliexpress.com/e/_9RHNl5
@andreasbmx100
@andreasbmx100 6 месяцев назад
What is the hose for? At 2:46 on the video?
@armandsanjuan5058
@armandsanjuan5058 3 года назад
Thanks for the video! One question, where goes the large transperent tube and what is the purpose of it? Thanks! I have a beta alp 4
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 3 года назад
Hi! It is vent for the float bowl. Also when you drop the bike gasoline may flow out this way. Often float bowl vent is on both sides of the carb, but in DR/Beta there is only one vent :) Cheers!
@abdullahodabasi2139
@abdullahodabasi2139 4 года назад
Hello @dawid&marta it me again :) I disassamble all of carby clean it and reassamble it but i want to learn how many spin to loose when the idle mixture screw full tight position hope i explain clearly
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
Hi! I think it is somewhere between 2 and 2,5 turns now.
@kikipikify
@kikipikify 5 лет назад
Great video again! I found the XU-07362 carb repair kit you recommended on the other carb video, thank you for that. Could you put links to the replacement parts you bought in this video please? Cheers
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
Hi, I updated description. Thanks for sugesstion :)
@kikipikify
@kikipikify 5 лет назад
@@DawidMartasMotoAdventures Awesome thank you!
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 5 лет назад
You're welcome :D
@TheManiacWorld
@TheManiacWorld 4 года назад
Zajebiste! Właśnie czeka mnie to samo z takim samym gaźnikiem. Dzięki! Idzie Sub! :) Zapraszam na mój kanał! PZDR
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
Powodzenia! Oby wszystko poszło zgodnie z planem! :)
@billbright1755
@billbright1755 4 года назад
Sotokanda Japan 🇯🇵
@DawidMartasMotoAdventures
@DawidMartasMotoAdventures 4 года назад
こんにちは Wrocław Poland 🇵🇱
Далее
Новый хит Люси Чеботиной 😍
00:33
The Most Elite Chefs Ever!
00:35
Просмотров 6 млн
Что думаете?
00:54
Просмотров 444 тыс.
DR350 Top End Assembly and Engine Install
24:53
Просмотров 22 тыс.
1996 DR350 Rough Running Issues
3:05
Просмотров 3,1 тыс.
I clean a DR650 carburetor.
34:58
Просмотров 29 тыс.
Regular maintenance of pegaso 650 Mikuni BST33
11:49
Просмотров 35 тыс.
BMW F650 (169) Vergaser 2/3 Überholung (Mikuni BST33)
28:01