How fix Audi A6 C6 3.0TDI 165KW 2005 year 00778 - Steering Angle Sensor (G85) 005 - No or Incorrect Basic Setting / Adaptation VCDS Датчик угла поворота рулевого колеса как правильно адаптировать Audi A6 C6 3.0TDI 165KW 2005 year
Man you have saved me! I accidentally wanted to code the abs module but wrote it wrong and i did not take a photo. Searching and searching i watched your video and tried your software code and guess what? it worked!!! thank you very much
Hi, it didn't work for me unfortunately. I did everything the same, only that in "Basic settings -04" in the drop-down menu I did not see "Steering Angle sensor G85 alignememt" but "Adjustement of ESP -Sensor Unit (G419). And when I follow all the steps, the error continues. 😔. Thank you
Hi i have a audi a3 2010 the steering rack was replaced and then the yello steering light is on the dash board and the abs light. Will this work. Mabey the steering angle snesor is out. Any help would be good i have the vcds machine. Thanks
Please help me , my audi a4 B8 2011 was replaced steering box there i turned on this step light vcds dir has to calibrate the steering angle but it does not work already tried everything and it is also licked system function test
HELPPPPP !!!!!! Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi a6 c6. Anyone?
Hi, when I'm trying to access ABS module with code 40168 I see an error "Access Denied", then I tried to find and enter other codes, and anyway I see another error "37 Required time didn't pass" Abs module MK60EC1. Any solutions or ideas?
Hi maybe vcds cable main chip do not support because china copy i knew have 2 or 3 different main chips, and some cable do not suport all blocks to open
Hello guys, anyone can help me, my car showed code 00778 after replacing clock slip squib ring and stating that steering angle sensor defective and no or incorrect basic setting/ adaptation? and showed yellow steering light.
Enzo herrera because i removed all steering wheel to resolder releys for ignition where problem is but in this case master who removed steerring wheel turn wheel too much in one side and broke steering angle
Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi A3 2006 model
@@ZDarjus i do 7 times, ITS posibile to mess something up? To destroy something when i do this steps? I Forgot to mention i have ESP light on and i think 1 ESP rear right bad
@@miricaalexandru5432 If you make diagnostic and have same fault codes it should help, if you see ESP light only and make this you don't know what you are doing. Because i think you don't know what is ESP