Early 6.0 HPOP....Fixing another shops FAIL

2005 Ford 6.0 diesel surging, hesitating, stalling issues SOLVED!!

ОБМЕНЯЛ свою Приору на Toyota Camry в Дагестане на АВТОрынке

ДВЕ МЕДИЦИНЫ В ОДНОЙ СТРАНЕ

Нельзя смеяться | Смех с водой | 66 #shorts

У Самолёта Отказал Двигатель над Жилым Районом 😳

03 Ford 6.0 DIESEL - ICP sensor Replacement

PowerStroke Tech Talk w/ARod

Подписаться 169 тыс.

Просмотров 100 тыс.

50% 1

Видео Поделиться Скачать Добавить в

2003 Ford 6.0 diesel Powerstroke or a VT365 ICP sensor replacement. Yoooo, whats going on yall. Welcome back. Here on this dumpy trucky, we had to replace the ICP sensor & its connector. This was the 1st time using my gopro hero2 in a while, was just trying something new. Hope this steers someone on the right path. SEE ya next week!!!!
MAKE SURE TO WATCH MY 6.0 PLAYLIST....LOTS OF FUN!!!
FORD 6.0 Liter Diesel Repair Videos: • FORD 6.0 Liter Diesel ...
Check out my Instagram
@PTT_W_AROD
Music: ------------------------------
Relax by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2RkwcNw
Music promoted by Audio Library • Relax - Peyruis (No Co...
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Авто/Мото

Опубликовано:

9 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 241

@MikeMaileFoolishBehavior 2 года назад

Thanks. After many RU-vid videos yours is the only one that has shown me the steps I need to follow and the tools needed. And under realistic conditions. (Wife and kids) great video.

@PowerStrokeTechTalkwARod 2 года назад

Hey I really appreciate you coming back and telling me thanks a milly...

@Pretzelboymn 9 месяцев назад

Best video on RU-vid for ICP sensor replacement on 03 and early 04 Ford 6.0l powerstroke diesels

@PowerStrokeTechTalkwARod 9 месяцев назад

🤘🤘🤘🤘

@donniephares5978 Год назад

Dude you are the man I love the way you work on The diesels all the way around man I have a 6.7 I started following your channel I also have a 6.0 and a 7.3 and you know I’m all keep up the good work dude

@stevenfuchs2548 3 года назад

Ahhhhh A PTT video in the morning, smells like victory!!! Great vid Brotha! made my day.

@PowerStrokeTechTalkwARod 3 года назад

Lolol

@jacobsilva8978 3 года назад

Just went and upvoted every video. Love your stuff man

@PowerStrokeTechTalkwARod 3 года назад

Thanks brotha. Share me around! 👌

@adamschmidgall7197 2 года назад

Followed your video to fix my truck yesterday. Had a heck of a time removing the electrical connection because the tab was on the back and the space was small. I finally used a coat hanger hook to slip behind it. It came right off. Used then same coat hanger to guide the socket into position with the new part. Putting the new electrical connection on was difficult with the space, but finally lined it up correctly with a long screwdriver through the wires and it popped right on. Thanks for the video.

@PowerStrokeTechTalkwARod 2 года назад

Hell yeah

@kevinschmidt9482 11 месяцев назад

Great video. Just did mine yesterday. It had been done before. Whoever did it before did kind of a half ass job and chewed up the harness pretty good. I went through and soldered/heat shielded everything. Glad I decided to do it from the top and not attack it from the bottom.

@gaymondavis9581 3 года назад

really enjoy your videos other than me you are the one i would want working on my truck lol. good work

@PowerStrokeTechTalkwARod 3 года назад

Thanks brother 👍

@GiediPrime100 3 года назад

Excellent vid! Gonna use ur method for my excursion. Thanks

@jerryknorr679 3 года назад

Very good easy fix thanks ARod

@PowerStrokeTechTalkwARod 3 года назад

You guys need to check out this playlist when you get a second!!!!! FORD 6.0 Liter Diesel Repair Videos: ru-vid.com/group/PLO4T4Ez-ZZaQkthM2pSuol5lAFvdXFnGG

@FroggyDaGremlin 3 года назад

Just did mine today on my '03....well my nephew did while I watched. Your vid was a big help. Also watched Diesel Tech Ron do one but he did it from below and that way looked too hard. The hardest part is getting the new sensor started in the hole. He finally put a short piece of rubber hose over the end of the new sensor to give something for his big meathooks to hold on to. Had to position match the new pigtail wires as the colors did not match at all.

@PowerStrokeTechTalkwARod 3 года назад

👍👍👍

@michaelchan8915 3 года назад

Wow. Memories!!! Usually set a P2285 when that happens. I can't count high enough how many of these I did. I still have my Snap-On socket specifically for this sensor sitting in my box. I get the sensor from the basement while doing the wiring repair up top. I think someone already mentioned it, but there's supposed to be a shield that goes over the sensor and connector for added heat protection. Those always used to get saturated with oil. Another important 6.0 pigtail part number to remember is 6E7Z-12A690-DA. That's the pigtail for the later model year VGT solenoid connectors that always break the cheesy lock tabs.

@PowerStrokeTechTalkwARod 3 года назад

Hell yea!!!!

@DS-TRUCKS 3 года назад

These home videos are great!

@PowerStrokeTechTalkwARod 3 года назад

Thank buddy boi

@joshuakeys411 3 месяца назад

Just dropped a Sub cause you made it look simple with no BS Love my 6.0 but always annoyed at these little things

@paulrodrigues9603 3 года назад

You must not be working fast enough. I can hear the Shop Forman calling you out. LOL

@PowerStrokeTechTalkwARod 3 года назад

Lmaooo

@syexplorarconmigo8853 3 года назад

She adds an awesome and adorable flavor to Family Diesel repairs bro... greatness there- family man 🤙

@PowerStrokeTechTalkwARod 3 года назад

😉👌🙌

@117tyler 3 года назад

Thanks! I'm going to be doing this on my truck tomorrow

@PowerStrokeTechTalkwARod 3 года назад

Good luck

@jayc4403 Год назад

thanks, for the helpful video about to get into mine.. Wasn't looking forward to going from under the top side looks so much easier

@PowerStrokeTechTalkwARod Год назад

Gravy broski!!!

@gnarlock3927 3 года назад

Good video it helps to be able to visualize where that puppy’s at lol. Those Milwaukee Ratchets are the beez kneez

@PowerStrokeTechTalkwARod 3 года назад

I love em!!!

@hibrad2005 3 года назад

Ooof that coolant hose collapse, there's some intense vacuum in there, bro needs a new degas bottle cap.

@samwarren7132 Год назад

Thanks for the video, I was able to DIY this and some some money!!!!

@PowerStrokeTechTalkwARod Год назад

Yeah baby

@pricechenault2607 3 года назад

I did mine about 10 years ago from underneath. Seemed less intrusive at the time, but it was a PITA! Had I seen a PTT video I would have done it from the top.

@PowerStrokeTechTalkwARod 3 года назад

Thanks for watchin pal!

@smokeskull 3 года назад

If the torque converter bolts were not so crazy hard to get in and out it would almost be as fast to drop the tranny

@PowerStrokeTechTalkwARod 3 года назад

Bro that job can be done before you'd even have the trans out 🤭🙌

@tamaranichols6821 3 года назад

about to do this repair. video was helpful

@PowerStrokeTechTalkwARod 3 года назад

Thanks pal!

@niceguy4928 3 года назад

They’re my first favorite. I have raised 4 kids on them .

@gunpornstar8379 2 года назад

Great video! Ty!

@markmaldonado9614 2 года назад

you make it look easy my friend excellent job wish we had a good mechanic out here in el paso tx im going to do it myself thank you for the guidance peace my brother

@thelockoutman Год назад

He didn’t show up putting it back in. Taking it out as easy..

@PowerStrokeTechTalkwARod Год назад

Why, you can't just screw it in? I would have figured you all could have connected the dots.....

@bryanosborne3853 Год назад

@@PowerStrokeTechTalkwARod This helped me get it out but I cannot get it lined up to screw it back in. I cannot get my hand in there to place it. Looking for tricks and tips!

@905Jerrod 5 месяцев назад

That coolant hose though !!!

@ricardorodriguez-se7tp 3 года назад

Arod the first time i did one on a 03 i told the guy yeah its fast it should take 5 min boy was i wrong and i told him the price already. It was a Beautiful 2006 King Ranch with a 03 engine couple months later it was stolen and stripped down it was sad. Keep them videos coming

@PowerStrokeTechTalkwARod 3 года назад

Wow! Thanks bud 👍👊💯

@kenhartford3959 3 года назад

I'm getting ready to do mine. I was told to unplug it and see if it starts running better, after watching the video there's a lot to take a part and put back together and then replete

@PowerStrokeTechTalkwARod 3 года назад

Yea no bud, just replace it.

@cleanexwindowsgutters1153 2 дня назад

Did this and i cant find it... Major pain in the ass.. your video was good.

@billgroel4463 3 года назад

Thank you for sharing

@kenhartford3959 3 года назад

Should I change the ICP and the the valve next to it at same time just to be safe?

@tobbystransmissions6046 3 года назад

, nice job.

@rylanfalcone845 Год назад

Thank you!

@franciscojaversaucedososa6333 7 месяцев назад

Thank you very much.

@MechanicTechnicianRepair 3 года назад

Excellent job 👏 👍 amigo. Nice video. Saludes. Noel matute California

@PowerStrokeTechTalkwARod 3 года назад

Gracias

@nbrowser 3 года назад

Soooo...new Super Duty...part time camera person, A-Rod is movin on up I see!

@PowerStrokeTechTalkwARod 3 года назад

😭😭😭👌

@donsoffroad2895 3 года назад

I'm getting ready to do mine

@PowerStrokeTechTalkwARod 3 года назад

Do it

@DustinHartman-tf3we 8 месяцев назад

Dude I couldn't even find the damn thing without your video. Thank you! Although with my situation I'm thinking it's going to be a high pressure oil pump, do you have any videos on testing the icp/ipr/high pressure oil pump before removal?

@PowerStrokeTechTalkwARod 8 месяцев назад

I do!! Goto my 6.0 playlist and you'll see the testing. Thumbnail is a 6.0 eng in the ground

@jcobra09 7 месяцев назад

Can’t wait 😳 ordering new Motorcraft sensor and pigtail now. Any other advice or things that are good to do while in there don’t hesitate to let me know lol thanks mang

@chiefin3615 3 года назад

Had to work on an 03 6.0 for the first time 6 months ago, same repair except it was my first time seeing an early build 6.0 and it kicked my ass because I didn't have a short enough socket. That night I went home and ordered a socket just for it, real nice skinny shallow socket in 3/8 drive. Of course still havent even seen an early build 6.0 since.`

@PowerStrokeTechTalkwARod 3 года назад

Omg...😔🤭

@MrEzplay Год назад

What is part number for the pigtail harness, thanks, I wish we had good mechanics here too

@jasonhusby480 Год назад

What’s with the collapsed radiator hose?

@68greengoat 3 года назад

Great Video, I am getting ready to do this to my truck, have you you ever seen the remote install kit for the ICP, that re-routes it to the top side of the engine. Read good reviews on them, but wonder what your thoughts were and if you had seen or install one of these kits....... Keep up the good work

@PowerStrokeTechTalkwARod 3 года назад

Never seen it. ICP repairs are childs play...

@dustyklein3026 3 года назад

Doing it this afternoon. Looks too easy!

@PowerStrokeTechTalkwARod 3 года назад

Gravy

@steves7458 2 года назад

You can use either ICP sensor. The only difference is KOEO voltage which is only a few tenths.

@nicolenikki9641 4 месяца назад

I just put a new wiring harness in my truck and I have that plugged in to the center where is that other plug go

@PowerStrokeTechTalkwARod 4 месяца назад

What

@ianquinn5916 2 года назад

When you discovered oil leak on back of valley after changing icp sensor... what did that end up being??

@PowerStrokeTechTalkwARod 2 года назад

You can go back and watch the video and find ou, that was the whole purpose of making the video to show you where the oil leak was

@oscaratkins8165 Год назад

Can u help me I have o4 f350 6.0 Wire on old color is not same as new plug in how do I wire it

@PowerStrokeTechTalkwARod Год назад

U match the wire terminals from the old one. Color does NOT matter

@justinbutler1592 2 года назад

Thanks for the video I've yet to find any help on exactly what my problem is hopefully you can help with some suggestions. I have an early model 03 super duty and I just recently had another motor put in it issue is the new motor is out of an 04 which was actually in a f-450. Motor is in the truck and running sounds good at idle but driving down the road it lacks its power and sounds as if the turbo is not winding out as it should. I've also come to notice that the ICP on the new motor is not plugged in we're now it is located on top of the passenger valve cover and I guess on my old motor it was down below the turbo the back side of the motor such as the one in your video. So am I screwed because the sensor is not plugged in I have the original wiring harness on the truck and computer is there any way that I can find the original plug and extended over to the valve cover? I have a feeling this is why the truck is lacking its power because this sensor is not plugged in

@PowerStrokeTechTalkwARod 2 года назад

U buddy are not in a good spot

@jeffreyharrelson5044 Год назад

How did you get your ipr plug to face straight up? Mine if fasting towards the heat shield?

@PowerStrokeTechTalkwARod Год назад

U can put ur aocket half way on & use it to turn the solenoid np

@mcool4587 3 года назад

six ohhhhhh! My fav. Arent you glad they moved those to the valve covers on the late 04's?

@PowerStrokeTechTalkwARod 3 года назад

Oh yes yes. Dont care too much for the rexroth pumps tho

@98fishingfool 8 месяцев назад

I’ve gotta 05 6.0 with 180k, it just started having a strange miss at idle only when warm, doesn’t have issues hesitating or taking off just miss/rough idle. Any idea ?

@PowerStrokeTechTalkwARod 8 месяцев назад

Sounds like an injector to me

@Graveltrucking 3 года назад

I don’t have small hands big meat hooks can be a curse lol. I’ve had to change the icp sensor on my 05 it wasn’t puking oil just stopped working.

@PowerStrokeTechTalkwARod 3 года назад

Thanks 4 sharing

@edgarjacob7020 3 года назад

Mine stopped working while running wondering if it can be this it’s cranking but won’t start

@PowerStrokeTechTalkwARod 3 года назад

Naw prolly not

@chrismarichalar7919 3 года назад

there is actually supposed to be a heat sleeve that slides over the icp sensor I have been trying to find an oem one for my truck

@PowerStrokeTechTalkwARod 3 года назад

Yea them are hard to find. Prolly an international number

@gerardobemcomo2706 Год назад

WHAT I WANT TO KNOW IS WHAT CAMERA YOU USED FOR THIS VIDEO!!! THIS IS ONE OF THE BEST QUALITY I HAVE SEEN!!!

@PowerStrokeTechTalkwARod Год назад

Cellular device pal

@gerardobemcomo2706 Год назад

GALAXY S23, I PHONE? WHAT resolution?

@PowerStrokeTechTalkwARod Год назад

S21 & iPhone Pro max & goPRO 10...4k 30fps🫡🫡

@tctwg1 3 года назад

I hate bringing tools from work to home to work on stuff. I always forget something lol.

@PowerStrokeTechTalkwARod 3 года назад

Right!!

@antf0eknee Год назад

Was there something wrong with the wiring or plug that needed repaired? Or do you replace it anyway?

@PowerStrokeTechTalkwARod Год назад

Yeah man, it had oil in it.

@cadenmoore757 2 года назад

Looking at a truck currently and he says the truck needs the icp sensor cuz it won’t start could this be a sensor that makes it not start

@PowerStrokeTechTalkwARod 2 года назад

Ummm no. The ICP sensor is only the eyes to the computer. Truck will start weather or not icp is connected or not

@outdoorsadrenaline Год назад

The belly of my 03 looks just like this one in the video and the check engine light came on Sunday shortly after changing out my oil. Hooked up my forscan and it says low icp voltage detected. I’m thinking this repair is in my immediate future. Thanks for giving me a clear understanding of what to expect! Was the connector bad that you replaced or did the new icp just have a different connector? Thanks again for helping all of us out much appreciated!

@PowerStrokeTechTalkwARod Год назад

Yes sirrr, you bet. You have 2 replace it because the sensor pigtail is all shorted out with oil & would cause a circuit related issue.

@outdoorsadrenaline Год назад

Makes sense thanks!

@outdoorsadrenaline Год назад

So I replaced my sensor and my truck is no longer having this problem. Thanks again for you sharing your knowledge it helped out greatly! I did opt not to replaced the connector. Upon inspection it looked okay though was saturated in oil. I sprayed it out with some electrical cleaner then blew it out with my compressor a couple times, added a bit of dielectric grease and didn’t have any trouble with it. The sensor itself was shot. Had cracks on plastic base where the oil was seeping out and with barley any pressure the the sensor plug end snapped right off. Thanks again!!

@PowerStrokeTechTalkwARod Год назад

Thanks for coming back & keepin it reall💯💯

@js9014 2 года назад

I can’t fit my hand into the space to disconnect the pigtail any recommendations

@PowerStrokeTechTalkwARod 2 года назад

Long pick, long flat blade....

@BarnStangz 3 года назад

"I'm fixin' a truck!!!" damn kids, always ruining the videos, lol, ask me how I know... Nice repair man, tough working on the weekends too, but you do what you do for the good cash paying customers!

@PowerStrokeTechTalkwARod 3 года назад

Gotta keep my fleets on da road TWENTY FOUR SEVEN!!

@hisomething5710 3 года назад

i got a f350 04 6.0 and it fires up great. when driving i’ll try to accelerate and it’ll end up stalling at 20 and 60. then i have to take my foot off and push down again, what do you think the problem is?

@PowerStrokeTechTalkwARod 3 года назад

I need 2 put the computer on it....

@gofish2393 2 года назад

My 03 did that about a week after I bought it off a guy. Took it to the dealer and they said hfcm and new fuel lines. $3500 I dropped the tank and found the strainer on the pickup line was busted off and pieces in the lines. I replaced the strainer, filters. Blew out the fuel lines and cleaned the hfcm. Ran great until yesterday morning after a really cold start it started puking oil from somewhere on the back of the engine... hoping it’s just the icp.

@robz355 5 дней назад

If this was neglected for a little while, would it cause a misfire tick and then white smoke when you turn the key over and it starts? I bought a 04 6.0 noticed the oil leak on the back of the block and it “loop “ at idle but not in drive..also if this is bad and neglected would it cause more damage to the injectors since now there is white smoke immediately upon start up SORRY SO LONG but thanks if you could help

@PowerStrokeTechTalkwARod 5 дней назад

No it would not usually

@robz355 5 дней назад

@@PowerStrokeTechTalkwARod thanks for getting back to me, so probably injectors crapped out too . Either way I’m replacing this. Thank you again! Prefect step by step video

@myleshansel7950 3 года назад

Question, could you have just cleaned the pigtail connector instead of replacing??

@PowerStrokeTechTalkwARod 3 года назад

Yea, but the oil makes the insulation so squishy and the thing never winds up sealing correctly again...

@TommyHolidayTHEONE 3 года назад

is there a way to connect correct wiring if you can't position match them? I had to yank the wiring out of the sensor so position matching is not possible anymore :(

@PowerStrokeTechTalkwARod 3 года назад

Yea ud need the wiring diagram

@TommyHolidayTHEONE 3 года назад

@@PowerStrokeTechTalkwARod thanks for suggesting that. led me to this diagram www.powerstroke.org/threads/icp-broken-wires.213845/#lg=thread-213845&slide=1

@justingomer4371 2 года назад

How do you get the plug of right in front of it??

@PowerStrokeTechTalkwARod 2 года назад

A swing tab..

@bodiesillem1041 2 месяца назад

What happens if I have a no start, unplug this sensor and then it runs fine. Can I just leave it unplugged and deal with the check engine light for the time being? Thanks

@PowerStrokeTechTalkwARod 2 месяца назад

That's not gonna make it start pal.....that's ONLY if the sensor is messed up..

@bodiesillem1041 2 месяца назад

Well something ain’t right then cuz that’s literally what happened. Truck no run. Unplug sensor. Truck run

@jonathanimes1943 8 месяцев назад

Great video, however my hands wont fit , I can barely touch the connector let alone undo it. Im gonna have to hire a elementary school kid to get in there 😂

@smokeskull 3 года назад

You fail to mention the expensive green oring on the vent hose that always grows 2 sizes when u pop it out

@PowerStrokeTechTalkwARod 3 года назад

Duh...i totally did. I have found ac orings work great!!!!

@shannonlochard7116 2 года назад

So can the pressure sensor cause the oil leak?

@PowerStrokeTechTalkwARod 2 года назад

.....that is why we changed it here

@CODRAMPAGE100 Год назад

Hi, my 6.0 ICP keeps blowing O rings. Prior owner said he replaced the ICP and IPR. Iv put on 3 ford OEM 14mmx2mm ICP o rings just to have it blow out again. Any advice?

@PowerStrokeTechTalkwARod Год назад

Blowing o-rings..... i dunno man. Youll have to email us.

@mattlacarra2069 10 месяцев назад

You might have a crappy knock off ICP. The cheap ones have a gap between the threads and the o-ring. Last maybe 3-9 months I hear.

@williambrown6721 6 месяцев назад

I have a 2003 F-350 powerstroke super duty 7.3 liter once I start my truck up and put it in drive gear and pull out of the driveway!! Drive about a half a block away once my transmission warms up it stops pulling do you have any input on what may be causing this to happen?.. I have done so much research on this problem but no one knows anything! Please reply back...thank you so much!!..

@edthatch3368 2 года назад

Is this sensor on the front of the passenger valve cover also?

@PowerStrokeTechTalkwARod 2 года назад

Yes, very good.

@jonesfarm1836 Год назад

Yeah the newer style 6.0s are. I think from 04.5 to 07

@3374jj 3 года назад

Yes.... Trade it for an 05

@AmericanRustWorker3369 Год назад

Easiest repair I’ve ever done was tell a customer if they want a reliable vehicle without constant repairs, don’t buy a ford , 😂 I work on that junk brand daily but the modules on fords are way better than chevys any day

@tomwiggins1225 2 года назад

Why is it necessary to replace the connector?

@jett-rampartflyer2852 2 года назад

They say because the insulation/rubber/silicone gets soaked with oil and never seals right again

@demitrioushicks4664 Год назад

Hey does the socket* size for the sensor vary? Im having trouble taking it off

@PowerStrokeTechTalkwARod Год назад

The bolt size....

@mattlacarra2069 10 месяцев назад

You might have a newer style. I’m pretty sure it’s a bit smaller.

@demitrioushicks4664 10 месяцев назад

@@mattlacarra2069 i got it it takes a icp socket, long enough to catch and not get cought on anything. Thanks u guys

@mattlacarra2069 10 месяцев назад

@@demitrioushicks4664 there are two sizes of this sensor. There’s the 3C…….. part number for the 2003 and early 04. It’s a 1-1/16” or 27mm. Then there is the 4C…….. part number that’s intended for the late 04-2007. It’s a 15/16”. Both will work on this model year, but the 3c…… is the intended part number.

@haleyy68 3 года назад

On my 3rd ICP sensor. 03 6.0. 285,000 still going strong

@PowerStrokeTechTalkwARod 3 года назад

Woo woo👊👌

@robertdilullo6765 Год назад

Do you still have the truck?Mine has 326,000.

@haleyy68 Год назад

@@robertdilullo6765 Yes 310,000 still runs great

@robertdilullo6765 Год назад

@@haleyy68 Mine still works great. How long can these 03 last?I'm considering a new bed.Rails and back fender a little rusty. Everything else looks good.

@rebeccarobinson7024 3 года назад

Mine says 12 03 but the sensor is on the valve cover what's up with that

@PowerStrokeTechTalkwARod 3 года назад

If u wanna get down on diagnosis your gonna have to visit my PayPal or Venmo, sorry fokes

@davidmehaffey9134 3 года назад

Cant get my hand in there to get it started back on . guess ima disconnect turbo exhaust

@PowerStrokeTechTalkwARod 3 года назад

Omg, fer realll...uggghhh

@crandallscooking 3 месяца назад

Will this fix my dreaded, start and run for 2 minutes then just stalls?

@PowerStrokeTechTalkwARod 3 месяца назад

Most likely not

@crandallscooking 3 месяца назад

@@PowerStrokeTechTalkwARod thank you. I had a "shade tree mechanic " tell me it was the fuel relay, which is hard wired to the fuse panel.

@PowerStrokeTechTalkwARod 3 месяца назад

@crandallscooking what a goof he is. Don't take it to pepbous they'll tell u it needs a mass air flow sensor

@crandallscooking 3 месяца назад

@@PowerStrokeTechTalkwARod 😂😂😂

@isidrogarcia9851 3 года назад

Did you get the connector from the ford dealer as well, if you did what’s the part number

@PowerStrokeTechTalkwARod 3 года назад

....did u not watch the video......

@gerardobemcomo2706 Год назад

Well if you would have seen the video you would have found your answer 😉 6E7Z-12A690-DA here you go just like many other citizens like to be handed things.

@joshuamoore24_7 Год назад

It was easier with long arm to put the ICP sensor in from the bottom.

@carlosramos9627 Год назад

✌✌👍👍

@rodndrone1198 2 года назад

The socket you are using is is like a short deep socket. My deep socket seems almost too long and my short is definatley too short.

@rodndrone1198 2 года назад

What socket are you using?

@PowerStrokeTechTalkwARod 2 года назад

A chopped down 27mm

@rodndrone1198 2 года назад

Thank you for the response. I was able to use my full size deep, but i had to use a pipe to bend the heat shield slightly back, it was still a tight fit. If another one rolls into the shop I'm definitely gonna make a custom socket. Thanks man

@PowerStrokeTechTalkwARod 2 года назад

U bet

@jonesfarm1836 Год назад

Hey Arod quick question! If you don’t have foil tape like you mentioned in this video could I wrap it up with some Tin foil (aluminum foil)? May be a dumb question idk. I replaced the ICP along with the pigtail over a year ago (sadly aftermarket part 😅)and it’s starting to go bad I believe. But this time I ordered the exact part you used in the video Ford OEM. I hope it will last much longer. Also prob 2-3 years ago I had to replace the IPR but I did buy Ford OEM to replace it so far it’s been fine. 2004 F250 King ranch 🤙🏻😊

@PowerStrokeTechTalkwARod Год назад

Yea, i suppose you cld!

@adrianspeeder 3 года назад

What does the ICP sensor do?

@PowerStrokeTechTalkwARod 3 года назад

A pressure reading sensor to the pcm

@jonahc418 9 месяцев назад

How much would that cost the customer? I just got a quote from my diesel mechanic and I wanna make sure I ain't getting to screwed.

@BuschBlackyLight400 2 года назад

Do you need to disconnect the batteries?

@PowerStrokeTechTalkwARod 2 года назад

Absolutely not

@gerardobemcomo2706 Год назад

You're better off if you do. Or use fender protectors/towels that way you don't run a risk of arcing with your tools.

@rebeccarobinson7024 3 года назад

Plus it just cranks and and shows no oil pressure until you get it to start and if u hit the fuel pedal shows oil pressure till u let off then stops working is that the icp bad new to diesels

@PowerStrokeTechTalkwARod 3 года назад

No, icp does not control gauge!

@rebeccarobinson7024 3 года назад

@@PowerStrokeTechTalkwARod ok anyway I can send video of what it's doing I'm on Facebook name is rian Robertson picture of a girl beside a horse I'm Rebecca husband we use same email lol

@PowerStrokeTechTalkwARod 3 года назад

What do i need video for..

@michaellevenduski7263 Год назад

Does it tell u which wire goes to . It looked different colors

@PowerStrokeTechTalkwARod Год назад

No, u match up each wire 1 at a time. Its only 3..

@michaellevenduski7263 Год назад

@@PowerStrokeTechTalkwARod it dont matter which is which then. To me they looked different colors, thats y i asked

@PowerStrokeTechTalkwARod Год назад

Mike, follow the video, i show u everything..............

@jonesfarm1836 Год назад

Look at both connectors and just cut and splice one wire at a time. Just have to make sure that you splice the correct wire in relation to where they are pinned into the connector. If that makes any sense. It does in my head anyway 😂

@mr.s7059 3 года назад

💪💪💪💪💪💪✌

@PowerStrokeTechTalkwARod 3 года назад

👊👊💯

@georgesipes5411 11 месяцев назад

Let's see how to line it up and plug it into the ICP

@PowerStrokeTechTalkwARod 11 месяцев назад

U suppose to see with your fingers

@gaymondavis9581 3 года назад

Hello have a question not really related to this video but more to diagnostics on 6.7. If vehicle is scanned with IDS with no codes present and no issues. Is it possible to tell condition of EGR cooler DPF filter and other costly items to get ahead a a pending failure or issue.

@PowerStrokeTechTalkwARod 3 года назад

Ehhhhh possibly. U cld watch all the data & see if its middle of the road or about too....

@gaymondavis9581 3 года назад

Is there any info out there as to what is supoee to be normal as far as back pressure egr temp dpf soot load for a engine with a giving mileage .

@PowerStrokeTechTalkwARod 3 года назад

No not really. Ford has reference values to compare to

@jeffreybuzbee1892 6 месяцев назад

You didn't show how you un plugged it. My MF'ing hands are to big.. can't get the stud out. I'm ill AF. Please pray for me!!

@rylanhendricks5553 3 года назад

About how long do you think this took you?

@PowerStrokeTechTalkwARod 3 года назад

Me? Or average joe......

@isaacolivo4117 3 года назад

@@PowerStrokeTechTalkwARod both

@PowerStrokeTechTalkwARod 3 года назад

Me 20 min...average joe....long time

@Imoverherenow299 3 года назад

👋👋👋👋

@PowerStrokeTechTalkwARod 3 года назад

Jr!!!!!!!!!!! Woooowooooo

@Kanesgarage 2 года назад

What do your charge for this repair?

@PowerStrokeTechTalkwARod 2 года назад

U can email me...

@donniephares5978 Год назад

Hey dude where are you located man

@PowerStrokeTechTalkwARod Год назад

Detroit

Далее

Early 6.0 HPOP....Fixing another shops FAIL

16:49

Early 6.0 HPOP....Fixing another shops FAIL

Просмотров 11 тыс.

2005 Ford 6.0 diesel surging, hesitating, stalling issues SOLVED!!

14:16

2005 Ford 6.0 diesel surging, hesitating, stalling issues SOLVED!!

Просмотров 68 тыс.

ОБМЕНЯЛ свою Приору на Toyota Camry в Дагестане на АВТОрынке

33:36

ОБМЕНЯЛ свою Приору на Toyota Camry в Дагестане на АВТОрынке

Просмотров 914 тыс.

ДВЕ МЕДИЦИНЫ В ОДНОЙ СТРАНЕ

43:03

ДВЕ МЕДИЦИНЫ В ОДНОЙ СТРАНЕ

Просмотров 278 тыс.

Нельзя смеяться | Смех с водой | 66 #shorts

00:58

Нельзя смеяться | Смех с водой | 66 #shorts

Просмотров 1,3 млн

У Самолёта Отказал Двигатель над Жилым Районом 😳

00:44

У Самолёта Отказал Двигатель над Жилым Районом 😳

Просмотров 1,2 млн

Another simple crank no start

10:20

Another simple crank no start

Просмотров 15 тыс.

No Start: 6.0L Powerstroke ICP Leak Testing

9:28

No Start: 6.0L Powerstroke ICP Leak Testing

Просмотров 543 тыс.

I Asked Diesel Repair Shop CEO What Is The Most Unreliable Diesel

9:54

I Asked Diesel Repair Shop CEO What Is The Most Unreliable Diesel

Просмотров 609 тыс.

ICP Sensor Replacement - 2003 Ford 6.0L

5:57

ICP Sensor Replacement - 2003 Ford 6.0L

Просмотров 42 тыс.

6.0 Powerstroke ICP Sensor Replacement The Easy Way

7:29

6.0 Powerstroke ICP Sensor Replacement The Easy Way

Просмотров 129 тыс.

SOLVED! 6.0L Crank No Start, 0 ICP, No Oil Pressure

13:18

SOLVED! 6.0L Crank No Start, 0 ICP, No Oil Pressure

Просмотров 18 тыс.

FORD 6.0 Diesel TURBO - 10 MINUTE REMOVAL

15:47

FORD 6.0 Diesel TURBO - 10 MINUTE REMOVAL

Просмотров 126 тыс.

Ford power stroke 6.4L. A complete build in 3 days

14:52

Ford power stroke 6.4L. A complete build in 3 days

Просмотров 172 тыс.

Early 03-04 powerstroke icp sensor tips

6:06

Early 03-04 powerstroke icp sensor tips

Просмотров 62 тыс.

P2285 ICP sensor tips and tricks on the 6.0 Powerstroke. (03 shown)

7:48

P2285 ICP sensor tips and tricks on the 6.0 Powerstroke. (03 shown)

Просмотров 558 тыс.

W truck driver #edit #trollface

0:20

W truck driver #edit #trollface

Просмотров 5 млн

ВЕНГАЛБИ вернул CLS🫡#wengallbi #automobile #bmw #rek #тамаев #юмор #рекомендации #венгалби #ахмед

0:12

ВЕНГАЛБИ вернул CLS🫡#wengallbi #automobile #bmw #rek #тамаев #юмор #рекомендации #венгалби #ахмед

Просмотров 723 тыс.

#бинго #habariar #ertugrulghazi #motobloklar #qishloqxojaligi #automobile #bingo

0:14

#бинго #habariar #ertugrulghazi #motobloklar #qishloqxojaligi #automobile #bingo

Просмотров 2,7 млн

Trafik Işığını Yönetmek #shorts

0:18

Trafik Işığını Yönetmek #shorts

Просмотров 10 млн

ТАМАЕВ ПОВТОРИЛ ЖЕСТ ВЕНГАЛЛБИ? #wengallbi #1000hp #mercedes #cls #mercedescls #венгалби

0:18

ТАМАЕВ ПОВТОРИЛ ЖЕСТ ВЕНГАЛЛБИ? #wengallbi #1000hp #mercedes #cls #mercedescls #венгалби

Просмотров 1,1 млн

Trafik Işığını Yönetmek #shorts

0:18

Trafik Işığını Yönetmek #shorts

Просмотров 10 млн

My new superbike🤩 Thankyou Doornekamp Motorsports #motorcycle #yamaha #shorts

0:12

My new superbike🤩 Thankyou Doornekamp Motorsports #motorcycle #yamaha #shorts

Просмотров 4,5 млн