Тёмный

#1 Fix with Your DTF DTG Sublimation Printer - Printhead Short Circuit 

Kevin at BCH
Подписаться 51 тыс.
Просмотров 4,8 тыс.
50% 1

Are you buying a DTF printer? Do you own an Artisan 1430 sublimation printer? What if I tell you there is a chance your printer may die tomorrow due to a poorly designed printhead? No worries, we will show you how to install a protective cover to save your printer. All it will take are 20 minutes of your time, $20 parts, and a screwdriver.
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact support@bchtechnologies.com
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: support@bchtechnologies.com
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.

Хобби

Опубликовано:

 

18 окт 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@northeastfire4188
@northeastfire4188 2 месяца назад
I see your video ur work is so neat i wish i could give my l18050 modified to DTF to you 😢its only a few months old and this printer gave me problems with printing white ink we don’t have good mechanic here i am from jorethang ,sikkim 🙏🏻
@demoking1422
@demoking1422 Год назад
Great information Thank you
@nancynorman6912
@nancynorman6912 Год назад
😢😮
@10100rsn
@10100rsn 10 месяцев назад
Permatex Ultra-black rtv works too but you need to be careful where you put it. It is removable but you can damage the cable trying to remove it from the thin cables... Permatex ultra-black is safe on electronics but not all silicon sealants are. If it smells like vinegar then its not safe...
@elainedavison61
@elainedavison61 2 месяца назад
Where do I find a cable guard that has the 2 tabs that holds the printer head cables off to the side. Mine broke and I cannot find 1 for L1800
@10100rsn
@10100rsn 10 месяцев назад
The driver transistors on the main board can go bad over time as well and this can give bad results even with a brand new print head. The transistors may still function and you can print but the transistor gain will become too low to operate the print head to 100%. It could give the appearance of a bad or clogged head when its the driver circuit just not getting the proper wave form to the head. I found that replacing the transistors is usually enough but be sure to test electrolytic caps and replace those as necessary. I like to add a high voltage film cap across the power input to each driver transistor pair to give a slightly longer life to the repaired components...
@2WistedWolf
@2WistedWolf 4 месяца назад
got a beep after i clean my print head, is it enough to change my printer transistor, or i need to change the print head too ?
@duanechristian8505
@duanechristian8505 Год назад
Is there a spring that can be used as a replacement for a missing capping station spring
@stephensharma3259
@stephensharma3259 Год назад
Hi, ive converted also but printhead nozzle test is very bad. can you configure my printer settings? already tried new printhead. Still same result. Im thinking low voltage maybe. The firing printhead is not strong enough. Can you help me please Kevin
@bmarketingbze
@bmarketingbze Год назад
Hello, there is any assistance I can get from here remotely. I have a 1390 dtf
@2WistedWolf
@2WistedWolf 4 месяца назад
my printer beeping after i clean my print head, are my printhead useless now ? or i can just change the transistor ?
@meirosebarnette7272
@meirosebarnette7272 4 месяца назад
Mine is also doing this I would love a update
@MrCarlitosway80
@MrCarlitosway80 Год назад
Can I send you my printer to fix?
Далее
How to Clean Waste Ink Tube (DTF Printing)
11:15
Просмотров 4,3 тыс.
рыбалка пошла не по плану🤯
0:19
СВАДЬБА МОЕГО ЛУЧШЕГО ДРУГА
0:24