10 Cool Things to 3D Print while you're Stuck Indoors

Подписаться 10 тыс.

Просмотров 1,4 млн

50% 1

10 cool 3d models you can print while you're stuck at home.
Paper Towel Holder: www.thingiverse.com/thing:413...
Soap Dish: www.thingiverse.com/thing:404028
Infinity Cube Torture Test: www.thingiverse.com/thing:357...
Pencil Holder: www.thingiverse.com/thing:305...
Cartman Cookie Cutter: www.thingiverse.com/thing:905066
Hypercube Vase: www.thingiverse.com/thing:341...
Fully Printed Vise: www.thingiverse.com/thing:206...
Maker Select v2 Z Braces: www.thingiverse.com/thing:172...
Question Block: www.thingiverse.com/thing:254...
Question Block Resized Question Mark: www.thingiverse.com/thing:426...
Batman Headphones Stand (Main parts): www.myminifactory.com/object/...
Headphones Stand (bat base): www.myminifactory.com/object/...
Timelapse Statue: www.thingiverse.com/thing:176...
Crimson Guitars RU-vid Channel: / @crimsoncustomguitars
PPE print videos:
Prusa Face Shield assembly: • 3D Printed Face Shield...
3d Printing Nerd video: • 3D Printing Face Shiel...

Наука

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 996

@HansMilling 4 года назад

You use cookie cutters for cookie dough BEFORE baking, not on a already baked cookie.

@KaelumYodi 4 года назад

I gave this video a thumbs up solely because of this. /facepalm

@Fjutcha 4 года назад

3:09 I would like to use the penis cookie cutter on the left and check the reaction of my family :D

@Vinpinto 4 года назад

He has never set foot on a kitchen

@cobaltic4556 4 года назад

I think he just can’t go buy cookie dough because of corona so he had to make with what he had

@HDTube101 4 года назад

When I saw that.. I was like.. "Oh my goodness.. Really?" rofl..

@charliescheirmann2926 4 года назад

5:14 Me (an intellectual): *prints a second vice to hold the first vice in place*

@radredguy5828 4 года назад

Mind size: *Mega*

@nutmeggaming11261 4 года назад

Cosmic brain time

@Mike-739 3 года назад

∞ iq

@cameronshaner9538 3 года назад

I don't get why you can just create screw holes on the model?

@Mike-739 3 года назад

@@cameronshaner9538 because the vice needs to be portable...

@jeffpotts6187 4 года назад

As an FYI, wood has properties that will often dehydrate most microorganisms over time. Hence the reason why people still use wooden cutting boards and utensils. Plastic doesn't do that.

@geekazoid2235 4 года назад

What does that mean for wood pla filaments?

@matthewsaxby9643 4 года назад

@@geekazoid2235 from what research I've carried out, wood filaments do have a similar microbial dehydration effect that normal wood products have

@briandunn2807 4 года назад

pla is easy enough to sterilze wine and beer maker's soluton: 5ml vinegar , 5ml bleach and 1 litre of cold water. soak for 5 mins, air dry , job done.

@aidangeist3106 3 года назад

PETG is actually very bacterial resistant.

@austinjohnson3977 3 года назад

Would they be good to make cups with? Like say if was just having it for water

@Azend_1 4 года назад

3:08 demonetisation shaped cookie cutter.

@Gibson99 4 года назад

screw you guys i'm going home

@HunGredy 3 года назад

More than one to be precise

@moizism8348 3 года назад

Dick cookies, my favorite

@integza 4 года назад

You have the voice of 14 years old boy and the hands of a 40 years old man Also the video is pretty cool

@xl000 4 года назад

look at his left thumb at 7:26

@tundeogunleye3157 4 года назад

Love your videos!

@alexanderabildsten9092 3 года назад

Did’t know you watched Remain inside.

@MR_DUCK_PRO 3 года назад

@@xl000 hes a big boie

@jrgv5754 3 года назад

oh well hello uh nice to see you?

@hussy4477 4 года назад

Why am I watching this when I don’t even Own a 3D printer

@Satisficing 4 года назад

I’m going to guess you also found this video in your recommended

@youtubechannle532 4 года назад

Same lol

@hussy4477 4 года назад

Yes

@hersenskim 4 года назад

*yet. I also watched 3DP vids without a printer, then finally got one last week and DUDE... It's an addiction

@ericsonbruh 4 года назад

Yeah same

@Praecantetia 3 года назад

0:18 No we fight over who gets to queue the 6 hour prints with the sparkling fillament

@zaneshepherd5245 2 года назад

The cookie cutter is meant to be used on the raw dough not the cooked cookie, the bar-soap holder is meant to hold the soap laying flat not upright

@LoganTanner 4 года назад

This video was way better than expected. Nice little nuggets of fun and humor throughout. Could have been dry and boring but it wasn't. Great job.

@TrionAlpha 4 года назад

That masking tape/superglue thing is brilliant.

@brandan_fpv 4 года назад

Yes watch Alec steel! I learned it from him. He’s a cool blacksmith youtuber

@igorfilipovic5153 3 года назад

Where i can found stl file for this

@thomasjohannesen1003 3 года назад

I saw this comment before I saw that part of the video, and I thought it was talking about using superglue on the print bed to keep prints from warping, and I was about to flip out about how bad of an idea that was lol

@fiddlesticks4015 3 года назад

U dumb

@kylecaldwell6818 3 года назад

The masking tape and superglue trick has been used ever since super glue was invented, i use it all the time for machining especially when im working with small parts that cant be held in a vice

@andreascyprus2 4 года назад

I love the addition of memes and generally funny commentary :) great work dude!

@RemainIndoors 4 года назад

lol. Thank you

@Cryptik_Gamez 4 года назад

Il ruin this like count soon

@GUYEG1985 3 года назад

Remain Indoors can we get a toilet paper holder

@jameshunter8041 4 года назад

3:10 on the left...

@mamamia8800 4 года назад

3:11 on the right...

@___echo___ 4 года назад

3:07 in the middle

@Ezzz-kv9zo 3 года назад

Omg guys

@kingslackerness8032 3 года назад

💀

@bananaking31415 3 года назад

3:07 on the top right

@memelad0062 4 года назад

6:39 I used the printer to print the printer

@virus5867 3 года назад

Me: Running low on filament... Also me: Prints some more... It appears you've been defeated, Dynamism.

@calebplaysgamesofficial 3 года назад

Pla is the most safe foodsafe material studied right now. But you shouldnt sand it, paint it, dye it, or put it near very hot or cold enough to crack it temperatures.

@dvns1987 3 года назад

“ some smaller plants or your favorite flours”. The simple things. Subbed for fact

@indica_nail_artist_6363 2 года назад

The almond flour/flower in the vase made me laugh way more then it should have😆

@myphone7568 3 года назад

Most brass has lead in it, so printing anything that comes in contact with food could potentially be risky if there are other sources of lead at play as well. Especially depending on the nozzle manufacturing processes as some tend to increase lead leaching even on low lead content fittings. The revised standard for lead content in potable system fittings is

@calypsia6978 4 года назад

I just figured out my settings on my Ender 3 and have been printing out some lithophanes. They're turning out GREAT!

@starcrashr Год назад

My partner and I tested positive for COVID-19 yesterday, while our first 3D printer is on the way. This morning, RU-vid recommended this video.

@RemainIndoors Год назад

interesting. the youtube algorithm strikes again. I hope you two get well soon, and enjoy the 3D printer :)

@7MaryD7 3 года назад

I wasn't expecting to laugh when watching a 3D print video, but I did more than once. LOL

@supermanlee_pvp2471 3 года назад

this guy reminds me of grant in his early days of youtube

@thisisus.504 Год назад

I'm sat here watching this great video with my newly delivered, 1st time ever, 3D printer. Plenty o assembly for me later. Loved that kitchen roll holder.

@thefrub 3 года назад

That 3D printed vice is genuinely the most useful thing I've seen come off a 3D printer. I know it's not going to be super strong, but everything else people make seems like something you'd win in an arcade for 20 tickets. aka junk

@RemainIndoors 3 года назад

yeah, it's pretty handy when you need to hold something small in place.

@chrinamint 3 года назад

This is the first video of yours I've seen, and I found it very interesting and useful! Also your corny jokes were funny! I really like some of the prints you posted, so I hope I get to print them. I just received my first 3d printer yesterday and took up until tonight to finally get it printing. While it's printing the little test cat, I found your video. So, I'm still learning. Hopefully I can learn how to take your suggested prints and actually print them.

@LilyLikesTech 2 года назад

For food safe 3d prints I recommend using PCTG as it is food safe and waterproof and also using an E3d stainless steel nozzle (also food safe) as cheap brass nozzles can have lead in them which isn't particularly safe for you.

@zodiak2461 Год назад

im making a piece for my shower that broke. can I use PETG for it?

@jamesb4242 4 года назад

Here in NY where my friend started a group in which we're printing face shields for hospitals and group homes. Around here they're happy to have access to ANY form of PPE! which is in very short supply in these parts recently. For my prints it's not a sterile environment per se but I do avoid touching the finished product with my bare hands, always making sure to use alcohol to clean off any purple glue residue if used. They sterilize upon receipt/use anyway

@webslinger2011 4 года назад

That vise will be pretty handy for my projects. Thanks!

@RemainIndoors 4 года назад

Awesome, glad to hear it. And that masking tape and super glue trick is amazingly helpful with it.

@EllisWard 4 года назад

Your cookie cutters for dough 😂 you’re hilarious thank you enjoyed the laugh 😆

@amethystcash3677 4 года назад

For anyone looking to print PPE in Ireland google “benchspace PPE”, they will collect your prints and sterilise and distribute them as well as reimburse some of your filament

@GUYEG1985 3 года назад

SCP-087-B

@Jessie_V486 3 года назад

@@GUYEG1985 087-1

@GUYEG1985 3 года назад

Jessie V size

@GUYEG1985 3 года назад

Jessie V big

@sillygolfswing 3 года назад

RE Brass - They used to use brass as door handles and push plates because brass is non ferrous and it produces an oil of sorts and bacteria hate brass.

@BrickThunder 4 года назад

0:06 For a sec I thought that said Ramen noodles😂

@JohnSmith-mk8hz 4 года назад

Clean the tip of the super glue with a paper towel before putting the lid back on. The lid won't get stuck anymore.

@TootEmCarMan 4 года назад

Keep your superglue in the fridge too. It will last way longer.

@3DJapan 4 года назад

Mine has a pin in the cap that goes inside the tip. That's supposed to keep it clear but doesn't always do I keep a safety pin attached to it. Sticking that in the hole always clears it.

@bumbarabun 4 года назад

These days it is easier to get more super glue than paper towel...

@GBOB68 4 года назад

I just buying the display cards with 20 tubes. throw tube away after use. life is so much simpler since I started doing this.

@evilldead6824 4 года назад

That tape idea was PIMP!

@williamhaynes7089 2 года назад

Even though i had to work every day during the 'pandemic stay at home orders'.. i still find this interesting

@my3dprintedlife 3 года назад

Pretty cool video. I've printed plenty of practical things while being at home.

@jarodsown2596 4 года назад

Paper towel holder! That's definitely going in my shop! Thanks! 😊

@RemainIndoors 4 года назад

Nice! May the Paper towel deities bless you with disposable paper products.

@lancer525 4 года назад

@@RemainIndoors All joking aside, that is the most ingenious, coolest paper towel holder I've ever seen. Too bad that all the paper towel holders I have are the stick-in-base type, where you just set the roll vertically on it. If I had an undercabinet mounted one, I'd replace it with this faster than you could print it.

@Turbo187KillerB 4 года назад

Homie you've been social distancing already for a long time from the name of the channel. Perfect time for the channel to rise up. Good video!

@coltondillon2380 4 года назад

Thank you! I will be printing the majority of these inbetween an order of Bonsai Tree Pots im doing now 😊

@wreckeddiehard 4 года назад

This was fun! for sure going to print the hypercube vase as a trashcan for my room XD Weird question though, what are the pliers/ cutters you are using at the end of the video? I have had a difficult time removing support filament and those seem to work really well! Thanks so much!

@alpachino468 4 года назад

3:08 I bought a 3D Printer just to print that adult cookie cutter...

@justcama 2 года назад

I was scrolling in the comments to find this. I knew I wasn't the only one who saw it 😂😂

@largejuicer8730 4 года назад

5:16 use a vice to hold the vice to the table

@hati5814 3 года назад

Polyurethane varnish is what you need to finish any food tools with,it has anti-bacterial properties meaning it's food safe

@havocproltd 2 дня назад

"...it seemed weird to put liquid soap in a soap dish..." Thank you. i needed a laugh!

@jeffwilbourne2282 4 года назад

Thank you, very entertaining, my wife and I really liked your video and hope you do more.

@darkohanzo3075 4 года назад

Gave it a chance.. Watched the #10.. cracked up laughing at the "fantasize about a day where I own paper towels again" and then the black and white with music.. instantly clicked subscribe.. Humor like that warms my heart

@jeffreyabbott1503 4 года назад

just did the exact same thing...

@crashed-in4945 2 года назад

That pencil holder looks like an epic joint holder for parties

@carbide1968 4 года назад

I enjoyed your video. Been slacking in printing with no money for filament but i got enough for useful prints.

@FishSnackems 4 года назад

I clicked because my old printer broke, so I was planning on buying a new one, and I stayed for the humor, this is instantly a great channel

@jeffreymuu5451 4 года назад

3:09 Nice

@Kymus 3 года назад

I had something similar to the infinity cube as a kid. It was a flat rectangle (IIRC) with segments that could fold and stick to one another. I totally forget what it was even called and now I want one again T_T

@russwoodward8251 4 года назад

Great stuff. I’m printing that vice. Thanks.

@rickslful 4 года назад

awesome vid as always! what were the background tracks in this one?

@RemainIndoors 4 года назад

Thank you, they were all songs from the RU-vid Audio Library. If you're trying to find any of them specifically, these are the song names: 1. Inevitable 2. St Francis 3. 8 Year Anniversary 4. Cubic Z 5. Bizzie 6. Lake George

@ooXxDrUmMeRxXoo 4 года назад

3:07 I see a potential pp cookie Edit: oh goodness there are a lot of cutters of people doing dirty things as other have pointed out haha

@machy8515 3 года назад

Oh... no, It’s perfect for gay men!

@evanbrown6923 4 года назад

The reason people think brass nozzles aren't safe is because brass can contain small amounts of lead. most of it of course is trapped inside the solid brass and will never see the light of day. And although some may remain on the surface the amount of lead and the contact area of the plastic on the nozzle is negligible. The majority will probably be expelled just by running a few centimeters of filament through. I'd be more concerned about heavy metals from canned tuna.

@MakersMatrix 4 года назад

PLA actually is food safe because it is synthesized from cornstarch and or corn syrup.

@robbekoreman5460 4 года назад

3:09 left on the 4de row

@scootermom1791 4 года назад

I'm still fantasizing about a day when I can own a 3D printer. 😏 BTW, this had been my life long before social distancing, too, because I have agoraphobia.

@CapnCoconuts 4 года назад

See if the Creality Ender 3 is right for you. Seems to be the budget 3DP of choice for a lot of people.

@Yatukih_001 3 года назад

I regularly go out, ignore the msm and the end result is a healthy body.

@andrewbeckett1727 3 года назад

3:08 the one on the left . lol . 🤣

@Jimgoodwin846 4 года назад

Yep the cookie cutter was funny. When I saw that I thought immediately about a donut cutter. Thanks for a great Video I like practical stuff.

@sigmundfraud7068 4 года назад

I’m offended that you said almond flour is your favorite type of flour. I prefer all-purpose flour.

@breezyolleh 4 года назад

Number 10, If you're like me... Number 9, If you're like me... ... Yea, I think I'm like you. This guy should have way more subscribers, not gonna lie.

@elix_ Год назад

The soap dish can be scaled up to fit a kitchen sponge pretty neatly :)

@wanamake 4 года назад

The pencil holder is really creative! I love your channel, great job^^

@Family-0-5 3 года назад

spent all my money on 3d printers and filament now i cant afford paper towels

@1haust 3 года назад

just print some

@mscottsimon 3 года назад

😂

@elrynder3987 4 года назад

First video of yours I've seen. This recommended to me by the algorithm and showed up on my home page. I was shocked when I checked your sub count, far too low for the quality of this vid. If you continue to put out this level of content this channel is grow very quick!

@dkiulian 4 года назад

I loved the content, going to print some of them, but it would look even better with more lights.

@AdamAarts 3 года назад

Wasn’t expecting a reference to Crimson Guitars, that’s awesome! And great trick

@StevenLandesVO 4 года назад

Just commenting to say the Man Bars are awesome, I got one for X-Mas and it lasted until just last week... Using that as a metric, I picked up enough nicely scented soap to last me for 3 years.

@Matt-dd1zr 4 года назад

What printer do you have? I might buy a 3d printer and the print quality on yours looks amazing!

@RemainIndoors 4 года назад

haha Thanks. I have a couple different printers. All of the prints in this video were printed on my Prusa MK2.5, CR-10 and Monoprice Maker Select v2. if I was going to recommend any of those, it would probably be the Prusa. The other two printers are pretty heavily modified, since they didn't have great quality straight out of the box. But there are cheaper 3d printers that do have pretty good quality without the need for mods. it really just depends on what you're looking to spend.

@Matt-dd1zr 4 года назад

Remain Indoors Thanks for the answer! Is the prusa beginner friendly? The printer I’m going to buy can be more expensive (max €700 or so). I was looking at an ender 3 pro at first and saw people doing upgrades to it wich made the printer really good, but I kinda want a printer that’s ready to print out of the box with good print quality but with the possibility to upgrade the printer. Are the dimensions on the prusa big enough for “bigger” projects like printing small rockets of figurines? What would you recommend?

@CraftedByKord 2 года назад

@@Matt-dd1zr you probably have already bought one but the cr10 v2 comes almost completely out together put together and I was able to get my first print in like 2 hours

@robbotheyabbo 4 года назад

oh god my GF pissed herself when you said "didnt get her permissions to buy" that hit close to home

@keithduffield5239 4 года назад

Whats your girlfriend doing watching 3d printing video's, shouldn't she be in the kitchen. I found this video refreshing, thank you. I like the style and pace - and sense of humour.

@Soravia 4 года назад

Whoever pays rent is the one with permission

@mandaloresmercy 2 года назад

Thumbs up just for the masking tape and super glue trick (plus great prints) that was amazing and super clever!

@bradmeekakasilvertopflyer 2 года назад

I work in a restaurant and I'm sanisafe certified the sanitizers used in restaurants today are very good and I'm sure if the plastic is washed sanitized and rinsed and dried. You have a better chance of winning the lottery than getting sick.

@youris4095 4 года назад

3:08 a adult cookie cutter uuhhhhh Just wtf

@lancer525 4 года назад

If it bothers you, then clearly, you're not an adult...

@neyloxfpv8023 4 года назад

Nice vid, but what are those thumbs maaaate

@ClaireWiles 3 года назад

Club thumbs, gross huh.

@VRtheFuture 2 года назад

Ooooh! Makes me think a 3d printed Vaas Montenegro bust would be dope!

@justinjbenjamin 4 года назад

Nice video! Just getting started and great ideas for my forthcoming Prusa Mini!

@Bubby74 4 года назад

My flowers don't look as good as that, do you use fertiliser?

@RemainIndoors 4 года назад

lol yeah. a little horse manure and a lot of bad jokes.

@miguelcasasarrojo8135 4 года назад

Me: doesn't have a 3D printer Me: watches this

@joshuavoss1387 3 года назад

This is great. You just gave me even more reasons to justify purchasing a 3d printer, thanks mate! Off to buy one now...

@RemainIndoors 3 года назад

Happy to help

@AlanTaylorShearer 4 года назад

First video first time on th channel, I subscribed at the kitchen roll holder. A sense of humour has me on board.

@avishekelberg4829 4 года назад

Another "10 cool useless crap for 3D printer" video. Pen holder? Soap dish? Really?

@WelshGingerCat 4 года назад

Wife or girlfriend? I'm a woman and I own one,

@pjaypender1009 4 года назад

Lesbians and bi women exist.

@taffetamocha4130 4 года назад

Wow, you are one person that is a woman out of the many people that watch this. This has been debunked he is in the wrong just because you watched this video. You are so Important to how people perceive that example.

@Scout339th 4 года назад

Lots of functional prints. Upvoted!

@MelsvanWees 3 года назад

Cool video! This makes me even more exited for my printer showing up soon!!

@Crafty420 3 года назад

Watching someone use a cookie cutter on an already cooked cookie felt wrong lol

@madsam7582 3 года назад

Cookie cutters are supposed to cut the dough before cooking. And wood is usually treated with oils that clog those pores, so they are easier to clean. So maybe give them a spray with food safe lacquer?

@Chipnuts 3 года назад

100% on point with that opener

@JonS 3 года назад

Porous wooden utensils are relatively safe because the wood contains turpentines, which are natural anti-bactericides. PLA doesn’t.

@alexwagle 4 года назад

Awesome.!! #5 is my design. Cool to see someone else print it

@-YouDontGotJams 2 года назад

I find this super satisfying to watch

@zero00044 4 года назад

The reason wood can be used as dishes and utensils is because they are made from specific types wood that has antimicrobial properties. Basically the wood repels or kills any bacteria left over after washing properly. That's why good restaurants use wooden cutting boards over plastic or stone ones. That and they are easier on knives lol

@sactownaimee 4 года назад

the masking tape with super glue tip may have just changed my life for the better, thank you :)

@128ajb_02_Music 4 года назад

I’ve been printing and assembling some PPE with my school. Our goal was 3600 face shields, but we have currently (written June 5th) over 5000 shields.

@wittsullivan8130 4 года назад

I just thought of this, a lot of cheaper alloys of brass (probably what they use to make cheap nozzles) have lead in them. that's why Christmas lights have the California toxicity warning on them, the brass contacts.

@RNMSC 4 года назад

Note that while the batman headphone stand is great, if your SO who's questioning your purchase of a 3d printer in the first place happens to be a gamer, and a fan of Wolverine, perhaps that would be a better choice to share and get her agreeing that it's not all bad...

@psychomantis2881 4 года назад

Ben at Crimson Guitars is a genius

@marek465 4 года назад

The best thing is adding 10 spools of cool looking filament to the shop cart and after that removing them and returning to normal life ("cries in broke")

@rottweilerventuresregister4598 4 года назад

I love your video and the way you talk. Very matter of factually with dry humour and your tone is very easy to keep listening to.

@kcpth 4 года назад

Awesome video.... I totally relate to ur comedic tones

@lloydsiemens5776 2 года назад

About the brass nozzle thing. My hot ware supply lines has brass and even lead fittings. It's more about the time the water spends in contact with the lead. Brass however even heated is not dangerous