Minor Upgrades Create Crazy Power on a Junkyard 5.3L Vortec - Engine Power S7, E10

Подписаться 1,6 млн

Просмотров 5 млн

50% 1

We’re starting with a high-mileage 5.3L Vortec that we got on the cheap. Our goal: make as much horsepower as we can, spending the least money possible.
00:00 - Intro
02:44 - Engine Teardown
06:27 - Engine Balancing Tech
08:50 - Block Cleanup & Rebuild
17:14 - Dyno Pulls
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Duralast: Duralast Engine Sensors
More Info: pntv.us/pn_pt_16272_5eed08b6d844d
Forney Industries: Forney Industries Abrasives
More Info: pntv.us/pn_pt_16275_5eed0a11a3984
Holley: Holley Dual Plane Intake - LS
More Info: pntv.us/pn_pt_16274_5eed09dadf3e8
Permatex: Permatex Blue Threadlocker
More Info: pntv.us/pn_pt_16273_5eed09805ba12
RockAuto.com: RockAuto.com - wholesale parts tip
More Info: pntv.us/pn_pt_16276_5eed0ab9a4c71
Matco Tools: MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot: Tools, Hardware, Shop Supplies

Авто/Мото

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,1 тыс.

@KayDoubleyouPea Год назад

"All of the factory harnessclips are easy to remove" right as they show footage of his bloody knuckles 😂

@yogiballa Год назад

Haha definitely

@philthelawnman 11 месяцев назад

You aren't working on anything unless you bleed. That's where the saying blood and sweat went into it.

@KayDoubleyouPea 11 месяцев назад

@@philthelawnman youre stupid if you think you have to bust your knuckles working on things

@TheArcticWonder 8 месяцев назад

The most unrealistic part of this is none of those header bolts breaking when you took them off with an impact lol

@precisioncoatings5019 5 месяцев назад

Less chance of breaking a bolt using an impact. I never break bolts using an impact only using wrenches.

@therealbenavis 4 месяца назад

The impact factor can break them loose, I agree it's less likely to break. Doesn't mean you should full bore it

@TheArcticWonder 4 месяца назад

@@precisioncoatings5019 I always break loose by hand and if it feels good I'll zip it. But too many cast iron head fords to just send it w my impact.

@imbrandon16 Месяц назад

I always tighten the bolts a tad before loosening them, less stripping snapping like that, idk why but it works lol

@PartoftheMadness 3 года назад

Digging the colour choice, boys. I spent 3 solid years working on nothing but Detroits. Brings back a few memories and a few cuss words.

@goosenotmaverick1156 2 года назад

I was hoping someone else noticed. I love that color. And of course nothing beats the sound of a Detroit 😎

@2012jakm7 3 года назад

They forgot to say that you have to have 15 pens in your shirt pocket in order to do this build correctly

@ActivityPhoto 3 года назад

Ya he not even using a pocket protector. Did someone tell Pay that made him look more professional?

@gerardorodruiguez5928 2 года назад

thats step 1

@gpatty6538 2 года назад

💀

@wilfredo198951 2 года назад

😁

@1normondo 2 года назад

@@ActivityPhoto Damn right pal! A pocket protector is definitely on any real professional man's list of "must haves" and it can't be substituted.

@demboyz6577 3 года назад

“The clips are easy to remove” notice his knuckles are busted and bleeding😂

@jeffklaubo3168 3 года назад

I said the same thing... immediate flashback to myself changing coil packs on my hemi "this will be easy" hour later and blood leaking from 2 fingers later... it was done. Hardest part was disconnecting those plugs.

@charlesmason1856 3 года назад

@greenbaysixxstring5008 3 года назад

Lol

@masonbennett2855 3 года назад

Thats why we call a monkey wrench a nuckle buster

@MrCrazyking81 3 года назад

I noticed they hired a new guy. Has any seen Mike Galley lately?

@drummer2k5 3 года назад

"Get big power gains on a low cost junkyard ls. All you need are these highly specialized machines that all cost 3 to 10 grand a piece and replace everything that makes getting a junkyard ls appealing"

@markcahoon2534 3 года назад

Glad someone pointed that out. It may have been cheap for them, but add the prices of getting these things done, and the price skyrockets. I wouldn't mind seeing the price, after all the adds that got added as well, they probably made money building this engine. I shouldn't complain I suppose, it was pretty informative to someone who knows squat about this type of thing, which is me.

@stopglobalswarming 3 года назад

It’s still cool. Someone might buy a bunch of these for race engines and hand their friends a few.

@wanderingbufoon 3 года назад

it's an LS.. they went overboard with all the cleaning and touch up and such. You have to realize that this is a show and have to make the engine presentable. When they took it apart, all they had to do was replace the worn out parts and slap the entire thing back together again. They didn't even need to repaint it.

@johndullebawn9625 3 года назад

@@markcahoon2534 every machine they used you could do the same work by hand, granted its alot of hours but just saying if you wanted to you could. As for the basic stuff like the ball hone anyone who you take on a job like this would have those basic tools.

@CORZER0 3 года назад

Sloppy mechanics does bigger power with stock internals and a cheap turbo. 500-800hp with less than $2k with engine.

@nyplantingsgardendesigners5645 2 года назад

This is all good stuff. When I went to Diesel/Auto school back in 1989 to '91 we were a select few who knew these sorts of things about engines. You are still missing some details but for the most part this makes much of what used to be a specialty and took a long time to learn more common knowledge. Plus you get tens of thousands of know it alls commenting on everything you do and say!

@mrkeopele 4 месяца назад

i had 2001 suburban 4x4 with 236,000 miles that ran great. when i changed the plugs there were no electrodes left on them and i only had a slight flutter on cold start up, so i can attest to those strong coil packs! great engines for sure. unfortunately someone wanted my truck so it was stolen but, at least they got a smooth running truck!

@EquilibriumAlchemist 3 года назад

Do it again with a torque wrench, a toolbox, and some sandpaper.

@jacobboyle1678 3 года назад

Lol me current in an apartment complex parking lot

@mikejonez3839 3 года назад

ahem emery cloth. it'll be FINE

@bryandavis9267 3 года назад

And duct tape

@xeronicus 3 года назад

sandpaper? That costs money, asphalt is free

@nathans9861 3 года назад

@@jacobboyle1678 dude same. Ambitions of an ls swapped s10 with no garage in an apartment with only a little craftsman toolbox and a solder gun.

@nothingaboutme. 4 года назад

never open up a junkyard LS. You let out the magic.

@3521Rookie 4 года назад

nothingaboutme I see you a fellow fan of Sloppy Mechanics page and RU-vid channel.

@spaghetts 3 года назад

Ahh yes fellow slops

@ivanbarajas5471 3 года назад

I put I'm a 5.3 out of the junk yard with about 153000 so i was told. Stabbed it in my truck with with only replacing water pump and thermostat and hoses plugs and it's been running strong for a year now.

@gamesofcontent 3 года назад

I was thinking the same thing, but didn't know how to say it lol. The 5.3 in my jeep was pulled out of a silverado and put in my jeep in a single weekend.

@JerzeyBoy 3 года назад

ViceGripGarage?

@Brock_Landers 2 года назад

I've built many junkyard found engines by hand using nothing but a well calibrated torque wrench, good quality bearings and piston rings, new pumps/gaskets, some Plastigage, and some common sense. You don't necessarily need all of these machine shop tools to rebuild a stock engine, you just need to know what you're doing. For instance, I built a B18B1 (1.8L DOHC non-VTEC Honda engine) and after break-in it put down 409 whp on an eBay GT3582R turbo.

@monicaturner5984 3 года назад

Great show as usual. Love the LS series, probably the best engine that has ever come out of GM. I would keep the injection (I did!) The GM air/fuel algorithms are spot on even for big valvetrain or forced induction. A new set of injectors and a tune don't cost that much more than the carb setup. And bottles are for babies anyway!

@davelowets 2 года назад

No. This is horrible advice. The factory G.M. tune isn't spot on at ALL for big cams, and added forced induction. Add a cam, intake, and exhaust on an LS, and if you don't get it retuned, you're throwing away a bunch of power.

@randomtodd5794 3 года назад

Plus ignition system, plus carburetor, plus headers, plus cylinder head machining, plus fluids, plus gaskets, plus sensors,etc, etc,

@aaronfonseca6867 3 года назад

Fr tho😂😔

@buffaloaf8205 3 года назад

Eh they are minor

@SpecialPenguinnn 3 года назад

Thank you.....

@toycoma98 3 года назад

plus shipping for the parts, all the special tools they used.

@lfuego68 3 года назад

Not to mention the machine shop to clean the gunk and put allllll the parts together…

@frostbite1991 3 года назад

pshh, this is fake. not 1 exhaust manifold bolt broke during disassembly.

@TwentytenS4B8 3 года назад

Took the words right out of my mouth.

@melirishjr.4602 3 года назад

They only break if you pull the manifolds in the car. Maximum P.I.T.A. results.

@rustedratchetgarage6788 3 года назад

@@melirishjr.4602 bull they break on their own anytime I've replaced over 1000 so far in my career since I've been doing 4.8 5.3 6.0 have to mig weld a nut onto most when they break flush

@user-cs3zs6jn1d 3 года назад

@@rustedratchetgarage6788 that engine hasn't seen enough miles before they took them out, or it's not from the north where every bolt you touch breaks

@coache1nine 3 года назад

@@user-cs3zs6jn1d, no way that's a "rust belt" engine with over 200k. Not one bolt broke

@williamroberts6803 2 года назад

Love the ring squaring tool. Never heard of one but is a must have. I’m a perfectionist when building anything and it would make it so much easier.

@mcgavin098 Год назад

Do it by hand and use the back end of a caliper to see that it is square.

@Spiritof_76 Год назад

Use an upside down piston with the second ring on it.

@DrFiero 2 года назад

I just yanked my 320K km 5.3 out of my Sierra - Other than VERY minor oil staining, the inside is totally clean. Bearings look like they almost just came out of the package. Bought from the original owner 5 years ago (so I know it's never been tampered with). DOD lifters were getting a bit janky, but still worked fine (large reason for my pulling it down was to do the delete). I've always done full synthetic changes at around 7000km. Point is, a well maintained engine like this CAN and WILL last!

@ericczajka1724 3 года назад

"This is a low-buck, budget build" ***cuts to scenes using $100k of specialized engine rebuilding tools and machinery***

@BimotaMoon 3 года назад

The dyno and the engine washer? Just use a butt dyno and a power washer... i just saved you $100k

@x2tb 3 года назад

Rebuild yours using duct tape and spit then post 📫 a video of how that went...

@Raccoonactual 3 года назад

Send the block off to the machine shop. It doesn't cost that much to get the block checked and decked, or to get the crank journals polished.

@shadowopsairman1583 3 года назад

Its a machine shop, and fyi its minimum new parts used...

@Chris-cu4ge 3 года назад

He used square tubing as a flat edge to sand the cylinder head surface. You dont much more low buck than that!

@sock979 3 года назад

An old machinist told me when you're wanting to get a flat surface with sandpaper like he was doing with the oil pump gear you want to do a figure eight and it makes pressure even on all the sides so it comes out flatter

@mikeceli 3 года назад

I was a Machinist and we also, always used a "Figure 8" motion.

@janegoodall3862 3 года назад

I completely agree with the ol figure 8 ! Old feller taught me that way long time ago

@TIMEtoRIDE900 3 года назад

I follow somewhat of a Pentagram Pattern and make it Hella-smooth !

@allenvaughn8823 3 года назад

I'm 35 now and you're correct ! I build motorcycles by hand and the only way to be precise by hand is to start out precise. And you rotate the part and a x pattern works. Yea these guys seem a little ameture to me too.

@Djkommode 3 года назад

TIMEtoRIDE900 lmfao

@robertclymer6948 2 года назад

Amazing! This video was fun to watch. Thanks for sharing guys!

@blacknova23 3 года назад

Anyone one remember the old Hot Rod Tv show or The Old Horsepower show? Those were the good days.

@tommynunez1495 4 года назад

I have a LM4 version of this engine. ( All alumium) in my Envoy XL. The oil pump was going bad so I replaced it with a Melling unit. So far hitting 360,000 miles and still running.

@marcmo7138 4 года назад

i have a lm4 i pulled out of an envoy. It had 145000 miles on it and still had the crosshatch in the cylinders. All of the bearings were in great shape.

@rustedratchetgarage6788 3 года назад

If yours is 2wd ditch the envoy pan they have a starvation issue with oil when taking off fast

@robertemmons2260 3 года назад

This was a good episode to watch. I like what they had done with their engine. Of course there are many ways that we can all choose to build and run our engines based on our desires. With this in mind, we don't have to follow their every step, but we can pull some ideas from this episode to help us choose what we can do with our builds. I had bought a running 2001 Suburban 1500 with 226,000+ miles on the Odometer back in April for $1000.00 with the intention of using the engine and parts for my '68 C10, or for my '82 Monte Carlo. I drove the 'Burban 2 hours home with no issues. The Suburban had came with the 5.3 LM7 engine as well. All I had to do to it was tighten 3 of the 8 spark plugs, they were loose enough to remove by hand! Here it is 4 months later and I'm still daily driving my Suburban. Of course I eventually had to replace the fuel pump because the old noisy one had finally quit working. To add, 4wd still works too.

@JackNatti 3 года назад

Gonna dump an LM7 in a gen 4 v6 camaro

@ActivityPhoto 3 года назад

Well in your cost rundown you forgot a few things that affected the outcome. # 1 Carb, # 2 headers, #3 Plug Wires, #4 Electric Water Pump, # 5 All the new sensors, # 6 Cost of Hot Tanking engine block twice, #7 MSD Ign. module. I see them doing this on all their builds.

@lucyloo2228 Год назад

Don’t forget every special tool that was required. Like an engine hoist, a shop to work in, a drill, the honing equipment, the property the shop was built on, the plumbing and electrical to operate the shop, land taxes, rent, 2 sets of hands, the budget required to get the engine out of the junkyard for example a truck or flatbed, etc. For someone that might own a car and/or lives in an apartment would be having to borrow a truck to haul an engine from the junkyard. In a normal situation they would also have to do all the engine work by there self. The title should read “If you already own a fully functional shop with every tool needed to clean journals and wash engine blocks at 150 degrees, with an engine hoist, a dyno, along with another ASE Master Certified Mechanic to help you, here’s how you can build a junkyard engine for $500”

@johnadams8082 Год назад

I think they were running down the long block cost. None of that would be including in a typical longblock price

@bigolfordf1502 Год назад

Dam I forgot a few things then 😥

@Crodgers88 Год назад

Most car guys have many of those tools in the garage

@Ariel0104 11 месяцев назад

@@Crodgers88yeah no they don’t 😂

@koltentilley5329 3 года назад

Dam Mike!!!! Haven't seen y'all since horsepower tv. Good to see y'all still going!!!! I used to watch y'all every Saturday and Sunday on spike tv. Keep it going brotha!!!

@MrPoorcharlie 4 года назад

These guys remind me of the guy selling cookware in the back of Walmart.

@UncleRichard. 3 года назад

I don't get it but it sounds funny. They remind me of the guys selling Baseball cards on home shopping channels, Gem Mint 10!!!!!

@galenmarek8287 3 года назад

Idk what you guys are talking about, but they remind me of a couple guys I used to watch on Sunday mornings tearing engines down and rebuilding them and spending a shitload of money doing so, and not to mention advertising for Matco

@rangerdoc1029 3 года назад

Gotta make the finger tent with your hands when speaking.

@williambeck2202 3 года назад

I don’t know much about performance building and tuning anymore,so I learned a lot from you guys, the dimples you drilled and finished to retain oil , really smart, so many common sense “ tricks “ well done

@saintjose1714 3 года назад

best on a budget 5.3 rebuild video on youtube 👍🏻

@billflk2364 3 года назад

Its extremely important to keep your vehicle and engine clean, and keeping your fluids checked and changed is the main reason for the least amount of damage or issues

@garityaun1098 2 года назад

I got a 5.3 450xxx never changed the oil in the year I had it, the dude I got it from just did what I do...add a quart every 3 to 4 months and every time I drive it I'm balls to the wall, Every day, hour long trips. On top of all that doesn't smoke even when I'm bouncing it off the red line, just a slow rear main seal leak 5.3 don't need those kinds of things lol

@davelowets 2 года назад

@@garityaun1098 That's just stupidity... 🙄

@northerngrit9656 3 года назад

If by "ring squaring tool" you meant "old bare piston" then yes I use one of those

@truthtimetv4575 3 года назад

right lol

@youcanbesmartaskhow3857 3 года назад

I just Sharpied "ring squaring tool" on my old bare piston I use on 5.3's. I liked your comment, stole the joke!

@KCDW83 2 года назад

Haha so true. I just use a square set to one inch.

@earlbrown 2 года назад

No kidding. When you're half assing a ring job, you always want to push the ring way down low in the cylinder. That way your minimum gap is measured at the tightest point of the cylinder. For those that haven't done the math, every .001" of cylinder wear opens up the ring gap .00314" (3.14 thou"). so, if you're going to spray a junkyard engine with that crap, don't set your minimum gap up top where the wear is greatest.

@garysorensen7724 Год назад

Somewhat on the subject of ring gap. I was curious, I didn't see it being mentioned or maybe I missed it ? But was there a ring ridge at the top of the cylinders. I would think there would have to be a some kind of ridge at 100k plus mile ? Also, thank you for your math equating what cylinder Wear equates to piston ring gap. Interesting and good to know.

@bmartin7828 3 года назад

I wish I’d seen some of this stuff when I did my DOD delete on my LC9 two+ years ago at 143k miles. Great stuff. I used Comp Cams pushrods, Summit upgraded rocker arms and non DOD GM cam. Cost me about $1500 with Texas Speed delete kit, Summit for cam, LS3 Melling oil pump, Sac City Corvette timing cover alignment tool, flywheel holding tool and a few other parts.

@billybritt5334 Год назад

Should have gotten the 4.8 they don't have that garbage and only and more power my 4.8 from a 2011 chevy has 305 factory hp and can be had much cheaper then the 5.3

@johnbehneman1546 2 года назад

WOW!!!! DIRT CHEAP PERFORMANCE!!!!! YOU ARE WITHIN MY BUDGET!!!!!! IT LOOKS LIKE SO MUCH FUN!!!!! THANKS FOR SHARING!!!!! YOU MADE MY NIGHT!!!!

@lawrencefoster2120 3 года назад

I watched another engine you started with 350ish hp and you put that nitrice on it and got that 650 hp. Now you showed another application and you sharing the Price's is really nice.

@frankdesire3245 4 года назад

What a nice paintjob, please more teardown - junkyard videos love those... Big fan of yours from Germany

@MikeL-vu7jo Год назад

I bought my Silverado new back in 09 she has the 5.3 in her , After brake in I switched to mobile 1 full synthetic or now and then Valvoline 5 30 and a good filter and swap out the oil when the sensor tells me to change oil that's about 6k to 7k miles , I've had a few things that needed repair over the years but I'm still driving her she has now 183K miles and some change on her , She was 13 years old last November , And I have her spray oiled every fall to control rust , I was told that 5.3 makes 315 HP , She still runs great , thanks .

@jasmith1867 3 года назад

I've never overhauled a 5.3. My expertise is on old small block chevys. I learned a lot on top of what I already learned by watching other 5.3 videos. And the Rock Auto commercial tells me these guys are for real. I'm almost ready to buy a salvage engine and take a shot.

@hardball107 2 года назад

If you can build an old small block you can do a LS easily, much simpler engine from the standpoint of gaskets and assembly procedures. Otherwise not much different.

@WesleyM.-mh8wq 6 месяцев назад

Only difference is the fuel injection and the camshaft timing advancement,the rest is self explanible

@timbowalk 5 дней назад

They are actually easier than a SBC

@SSDracerSD 4 года назад

Morning coffee and engine build, good sunday so far.

@davidcrouch3226 4 года назад

Annnnd... now to the garage. Perfection.

@edwardk7286 4 года назад

Haha 10-4, doing the same thing until the wife starts her honey do list.

@The_Crasher-xj4el 4 года назад

david crouch just got back inside from putting my star headliner back into my truck. What a PITA

@brettspaulding5855 4 года назад

Honey do list. The bane of d.i.y. hotrodders everywhere.

@hawkdsl 4 года назад

@@brettspaulding5855 Heck.. it's the bane of everyone alive!

@oxidizedolive 3 года назад

As soon as I saw the green paint, my mind went to the old 53 and 71 series two-strokes. 🔥 Beautiful color for any engine. ❤️

@btakin8737 3 года назад

Great video guys, one of you looks old enough to remember when you didn’t have a badass sponsored machine shop when small block Chevy cost $1 per HP!

@robertbroderick3896 2 года назад

Wow 30,000 on ring gaps is huge! Factory specs are 19,000! Im running twin turbos on my 04 lq4 6.0. I did same thing, new rings n bearings, hand honed cylinders, valve job, new cam, cam bearings and valve springs too. So I opened my ring gaps to 28,000 on top and 26,000 second ring for turbo motor. I ran it this way for a year naturally aspirated no problems. Now I added and run it with twin turbos 10lbs boost, e85, sloppy Stage II cam 228/230, 585/585 lift, 112 lobe separation, 100 lbs injectors, terminator x, TBSS intake, turbo 400 trans in 72 nova. Runs super, very strong, reliable and no issues!!! Great fast street/strip car, very good street manners too.

@user-cs3zs6jn1d 3 года назад

Damn, 2:38 into the tear down and already bleeding. And 4:38 , that my friends is why all LS engines have a check engine light for the knock sensor

@MechanicalMikesRoadsideRepair 3 года назад

Only 21 years old and for a long time I was always interested in cars and all these different shows, and wishing I could do that. Here I am 7/5/20 I'll be a certified auto tech in 5 days and I have a spare motor and trans that I'm building and swapping into my car.

@shmoofgang 3 года назад

Good shit man, skys the limit

@DANTHETUBEMAN 3 года назад

There is a hei retrofit front oil cover, with the edelbrock intake and msd ignition kit, you have a great 5.3

@arkansastrey9694 2 года назад

Congratulations : )

@bobpritchard979 2 года назад

This is why I love my 2001 Tahoe (LS). She is almost at 400,000. Once she hits that I want to rebuild her as you all did. I'm not going to run Nitro in her, but she as always taking care of me, so it will be time to take care of her. Yes I am a proud Chevy Man! I love my Chevy's. If there is anything other tips you can send, let me know. Again Thanks V/r Bob

@drwombat 3 года назад

I regularly went 7k-15k on my oil changes (04 5.3 200k, mix of budget brand conventional and syns for every change) when we finally got the oil pan off at 190k my dad had to do a double take everything was fresh honey colored with no burning or sludge...

@KCDW83 2 года назад

When you have to add 2 quarts a week that doesn't really suprize me. 😋

@TOMVUTHEPIMP 6 месяцев назад

Cool story but its total BS.

@accuracymark 4 года назад

Just shows how well that vortec engine breaths with the heads and port design

@Mike383HK 4 года назад

You usually have to replace the valve springs and rockers with LS1. The 5.3 is a truck engine so the valve springs float at 5,500 RPM. It's designed that way. That's why the engines don't break or wear out. Well that's what Summit told me what I had to do for a cam change or it wouldn't work. That stuff is used so it's cheap as hell.

@marshallwarden4240 3 года назад

@@Mike383HK valve spring upgrade is necessary with about any ls engine. Rocker arms are same on ls1 ls6 ls2 5.3 4.8 6.0 ect... ls2,ls6, ls3 do have upgraded valve springs that can be used with some of the smaller aftermarket camshafts. Good budget upgrade on truck ls engines. Rocker arms are good to go as are. Trunion bearing upgrade is good idea for large cams & lots of rpms.

@mountainofeverest3861 3 года назад

Corvette 327cid (5.3) was making 375 horses bone stock 50 years ago with very pedestrian double hump heads. These dufuses wimped out on the Cam. Simple valve springs and agressive cam would have gotten them into the middle 400's. .. No nitrous needed.

@wannabeetiger 3 года назад

Vortec fast - burn heads are decent.

@billallen4793 3 года назад

@@wannabeetiger will the vortec fast burn 350 5.7 work on a small block 400?....from Wyoming USA 🔫🤠🇺🇸p.s stay safe and healthy everybody GOD BLESS OUR COUNTRY AND stop this foolishness ❤

@kkkk-wg6je 3 года назад

Should have kept fuel injection

@ironhead320 2 года назад

Wow that's nice you guys giving me ideas for my 5.3 trailblazer

@fabianatencio6634 3 года назад

Pat is a master at his craft. That being said he knew those were the wrong jets. His comment about flirting with disaster was a sub.

@johnharris6655 3 года назад

I had a 5.3L with 4:10 rear end gears in my 2000 Suburban. Man that thing was beast when it came to towing.

@ogfromutube9649 Год назад

I have an lm7 with l59 flex fuel and lc9 oil pan in a Volvo 240 with 3.73 gears and spooled diff lol. Has a summit 8707 cam, pac 1219 springs, and Brian tooley pushrods and trunion kit, with 1" 7/8 headers, a trailblazer SS intake, and 92mm tb. She's a hoot!!

@etsumoses2634 10 месяцев назад

Hey man hit me up, would need some advice and follow your path am in a process of my rebuild LM7 5.3 to swap into my Volvo 245 1986. Could need you experience, aLOT!!!!

@peterm3964 2 года назад

Love you guys KEEP IT UP . GREAT WORK !!

@smokinapancake1234 2 года назад

I wish I knew how to work on engines like you guys. Smart af

@EL-tf5ek 3 года назад

They left out at least 50% of the cost. I’m pulling my 250k mileage 5.3 from my Silverado to put into my 67’ Biscayne. I’ll probably upgrade it to a 5.4 327 (as long as it’s not dead lol) but finding a budget build is hard. They’re all like this video. I’d like to see them do a true budget build without crazy tools. Just power wash it and change some fluids.

@prestonpetterson4990 2 года назад

Fuzzy dice projects does that stuff with sbc and bbc

@hydrocarbon8272 2 года назад

Umm not really. Most guys get a bad case of While-I'm-In-There-itis and replace/blueprint everything. They reused the rings, pistons, headbolts, only adding cam/springs/intake/carb/nitrous. EVERYTHING for my 67 Firebird swap has totaled $1600 inc fuel system ($200 engine). So far I'm at $700 for the complete turbo bits - turbo, v-bands, couplers, piping, wastegate, IC.

@ethangonzales3000 2 года назад

@@hydrocarbon8272 where’d you get the turbo parts from?

@jjjj66230 2 года назад

you have to add this is way way way pre COVID prices was that cheap & that they have a million dollars worth of tools we don't have 😭😂🤔

@hardball107 2 года назад

It already is a 326 ci/in engine. Find an used set of 5.7 pistons at a machine shop and bore that 5.3 out to 5.7 (350ci), that's all you need, the crank and rods are the same as the Corvette pieces.

@kademorgan7299 3 года назад

Pulled a 5.3 out a suburban 317,*** yesterday getting brian tulley heads, cam lifters full rebuild going in a 65 ford fairlane wagon I'll keep y'all updated

@x2tb 3 года назад

Any updates?

@bodirt6516 2 года назад

Keep up with the receipts...let me know how "cheap" it is ...you're about to find out.

@huntergabbert8596 2 года назад

That's awesome I work on detroit diesels for a living! I rebuild them with central power! Beautiful color indeed

@flylowkey3407 2 года назад

Holy shit!!... I wouldnt mind stealing the specs and building this engine myself. What a great bang for the buck. Great video gentlemen!

@Mike-xt2ot 4 года назад

I like how these guys are so amazed at what we've already been doing for 15 years. I am glad they caught up to the times. Better late than never. I still enjoy watching though.

@frigglebiscuit7484 3 года назад

these shows were all aired in like 2008.

@1slow5point0 3 года назад

This is like a 10 year old video.

@901headbanger 3 года назад

Frigglebiscuit he’s got an iPhone 11 so I think it’s recent actually

@osburning182 3 года назад

@@901headbanger haha.. same thoughts :D

@shanechambers9529 3 года назад

@@1slow5point0 The Iphone says otherwise lmao

@Ws6dave 3 года назад

I'd like to see this retested with the fuel injection and a tune. I feel like not many people buying junkyard ls stuff are going to do a carb swap.

@dth2731 3 года назад

I agree. I see no reason they can't do both. Doesn't take that much time and they have the parts they took off.

@jamesharrison6201 3 года назад

Plus, what they are putting it into, a carb will be illegal

@squidusn71 3 года назад

Old school guys with old school cars prefer cabs.

@kam3l749 3 года назад

Squid Usn yeah but carbs are objectively worse than fuel injection

@christianmotley262 3 года назад

@@kam3l749 I can work on a carb on the side or the road, can't do that with FI unless its a fuse or something

@hawaiisurfingacademy 3 месяца назад

I am totally impressed by your work!

@JonTheGeek Год назад

That paint job is something special. Love the color.

@kylestewart8049 3 года назад

How to turn a $500 junkyard engine into a $5,000 dyno dandy.

@brianswan3899 3 года назад

True dat!!!!😂

@Getitstraightyo 3 года назад

Lmao this. "After we reused everything" not including complete tear down, hone, tank, gasket, bearings, reassembly, new cam, aftermarket intake, carb, ignition controller, nitrous, etc. Silly ass video.

@hoov100 3 года назад

Don't forget the rebuilt heads!

@mcozpda3392 3 года назад

$500 for a junkyard ??? where , not all junkyard have that price . and in Illinois the junkyard engine is very expensive , And if you are lucky , they give you the electric harness , or they charge you extra for the electric harness ....

@johnnyjohn8073 3 года назад

@@mcozpda3392 In my state they are all over the junkyard and not too many people pull them out. But I won't say what state i live in. And yes, they do go for around 500 bucks.

@russellgoode4806 3 года назад

At least the paint was free. Nobody would have paid for that color.

@josephkordinak1591 3 года назад

That's Detroit green, if you ever hear a buzzin dozen pulling a load up a grade on the governor you will never make fun of their color.

@kevenoneal8838 3 года назад

@@josephkordinak1591 Have you seen screaming Jimmy Video? If not it's great.

@sandyshoremann7524 3 года назад

Hey I'm an old BUICK Nailhead guy, I respect that color or something close to it. So what color goes on a LS engine? Black? Chevy Red - Orange has to be reserved for Gen I, IMO - Sandy

@sebastiencharette6637 3 года назад

@@sandyshoremann7524 I initially thought it was a Buick color... Until they said it was Detroit.

@YourpainRx 3 года назад

Forget about the paint! I am going pink!!😂😂

@johnfairchild3421 Год назад

Use very little silicone or it will squeeze out clog oil pump. Also put a little extra in corners

@ChurchieShed 3 года назад

Great. All my 5.3s are going to get this spa treatment! Nice

@paulmccoy2908 4 года назад

“When a junkyard en-“ *youtube ad* “gine makes big horse-“ *youtube ad* “power on the dy-“ *youtube ad* “nomometer, you know“ *youtube ad* “that...”

@hawkdsl 4 года назад

the internet is hard.

@projectinlinesix 4 года назад

Get the Chrome Extension "AdBlock". I never see ads on RU-vid.

@seanoleary1979 3 года назад

AMEN BROTHER!!!!!!!

@ninerocks 3 года назад

Use Brave browser my friend.

@1stTactless 3 года назад

AdBlocker Ultimate

@barrypicker 3 года назад

Too bad you didn't get a baseline before tear-down. Would be interesting to know what the difference is.

@reggieanderson885 3 года назад

@1:08

@pbear216 Год назад

Stock 5.3L makes 330 hp

@SkilledAvalanche 11 месяцев назад

@@pbear216 depends on the year but if its 99 it makes around 275 then 00-03 285 and 04-06 295

@pbear216 11 месяцев назад

@@SkilledAvalanche correct, and I should note that the 07-14 only made 330 when running on E85. Pump gas only made 300

@mattcrook4978 6 месяцев назад

@pbear216 wow. Someone that takes time to go back and make something more clear? Is this even the internet? Lol thanks man I was wondering how the hell I got screwed out of 30 hp

@johnfairchild3421 Год назад

Awesome simply marvelous pay attention. Shade tree mechanics get that tip when you can

@nosnerd1967 3 года назад

Pat ...doing a little jig before pressing on the button 😆

@joshtheking1772 4 года назад

"I saw some big numbers dude." Did you see Pat's face.

@jakespeed63 4 года назад

Dammit Man!! It's hard to beat these engines...especially for the price. We have trucks at work with over 150k miles, that still run strong. Granted they were just driven around the city and synthetic oil changed twice a year.

@anthonyyates616 3 года назад

I change my oil 3 to 4 times a year but drive over 65 miles a day to work 07 silverado 191000 miles

@eddieellison7679 2 года назад

You mean you don’t just toss everything in the trash and get all new stuff! Love it, reminds me of my dad.

@Backupnow-gf7wb Год назад

Nice job, but you can slow down the building, try actually showing what your doing, you could have made it a 4 video series. Don’t just run through it, you look like a autozone ad

@buddyrebel_Garcia Месяц назад

There’s a lot of videos on RU-vid that show step-by-step

@YourMom-vl2sp 3 года назад

"Easy to remove." 2:40 shows first blood taken 😂🤣

@pcat1000 3 года назад

The one dudes pocket protector was fully stocked, that's how I knew he had proper experience.

@mattscott4387 Год назад

Pat Topper! He’s amazing! What an incredible resource!

@grim4uZJ Год назад

Cool build, would rather see the build done with stock intake and FI setup tuned.

@Myvintageiron7512 3 года назад

You could get the exact same results by just a cam swap and intake upgrade on a bone yard engine most of the other stuff they did was unnessassary

@eduardomenchaca1916 3 года назад

They didn’t even do anything else besides cleaning which if you want a long lasting engine, is necessary . All parts were stock besides the mild cam

@randallcanter2127 3 года назад

Only other mod was oil pump and I can see that being important engines won't run long with out oil pressure

@thedarkness5133 3 года назад

Cleaning is pretty necessary

@nate0765 3 года назад

Yeah, they could’ve just upgraded the cam and intake but it wouldn’t be much of a show if it was over in 5 minutes.

@fabslyrics 3 года назад

and how about the dupli-color green enamel 2000 paint ? Gotcha :))))

@whackbag3606 4 года назад

Just ignore all the brand new coil packs, wires & ceramic boots.

@cmsracing 3 года назад

And $1,000 carb.

@roberturban5135 3 года назад

And headers

@tommerilan555 3 года назад

Umm and msd

@alhart6665 3 года назад

New cam shaft

@johnschuster9192 3 года назад

What about the carb? oh they must have forgot about it....5,6,700 dollars.. clowns :)

@spudthompson1414 Год назад

Nice job guys impressed and that takes

@MyJp1983 2 года назад

When I got into cars 20 years ago, if you could get 450hp out of a pump gas small block it wasn't unheard of, but you were definitely the man (No serious street culture in my area) now with LS engines it's like "I got 800hp out of my oil burning, rod knocking 5.3"

@newenglandautoandtruckrecy5636 3 года назад

Clean & Re-use! The reason why OEM parts are the best. Great video guys.

@frankclark7039 4 года назад

They didn’t include the machine work they did in house.

@tubs1979 4 года назад

Exactly

@besearchingforwisdom6267 4 года назад

And the carb

@frankclark7039 4 года назад

DontBe StupidAnymore good catch

@JamesBond-fx3zt 4 года назад

and the headers

@hawkdsl 4 года назад

400-800 carb, 400-600 headers. "machine work" as you call it is not exactly true. they polished the crank with cork ribbon only.. you can do the same with shoe string and brasso.

@thetreblerebel 3 года назад

Really good engines, garden variety means it'll make your swap go fast.

@codyzellner 3 года назад

The stance the dude took before he hits the nitrous. 😂

@timeless6964 2 года назад

Getting The Grip Just Right!!.......Big Button!!

@googlesucks4836 3 года назад

The low build budget was busted on the cost of the all the pens and pencils in that guys shirt pocket.

@qweasdzxc1281 3 года назад

Junkyard motor worked up with 10 grand of tweaks

@michaelripley5799 2 года назад

He had me at "the cam bearing look good" 🤣

@andrewyounkin6948 2 года назад

I love the Forney round disk they save you a ton of time and are a worth will investment in the long run.

@GearScar 3 года назад

Minor upgrades to a junkyard LS making crazy power.. Chapter one rebuild it. (somehow I was under the crazy impression we were just going to do some minor upgrades to it..)

@flyjum 3 года назад

I would have guessed it would make 400+hp NA with the stage 3 cam motion cam, long tubes, intake and tune. Most bone stock LM7s make 340+hp and ~370 torque on engine dynos. I think hot rod magazine did a test some factory cams and the 5.3L made over 400hp with a stock LS9 cam. I am guessing the tuning for AFRs or timing was off on this test

@matrox 2 года назад

I looked at a mid 2000s Pontiac Grand Prix GTP years ago when new. They are the 5.3 Supercharger setup. I test drove it but it did not have the Ooomph I was looking for. I had a Pontiac Grand Am at the time. Back then the only real performance available was the Corvette or Mustangs GTs. When the Camaro came back out I got a 2011. Nice car. I later traded it in on a 2017 Camaro SS 6 speed which is my current car. The fastest car I have owned so far and I have owned 60s era Muscle.

@DIYDaveT 3 года назад

Fun. It's always so satisfying to see a dirty mechanical thing cleaned up and spruced up like this.

@jimdeese1538 3 года назад

Great video! Important technical content yet not patronizing nor overly complex. Excellent work guys and thank you!

@lewisdeclouette6342 4 года назад

Got to love Chevy and Ford especially with laughing gas

@slapsone6173 2 года назад

Keep up the great work @POWERNATION

@Fighterofthenightman_ 3 года назад

I’m 17 just got one of these out of the junkyard I have 1500 dollars set aside am going to be building it fully forged internals and slapping a supercharger on it should get like 500 to the wheels very happy I chose the lm7 for my first real project

@criskyro 2 года назад

Best video out there ! about to make beast single cab daily

@REVNUMANEWBERN 4 года назад

I'd like to the Ford 300 inline 6 , with it's Heavy Duty exhaust manifold with either a Howell Fuel Injection setup of a Fi-Tech EFI setup, with roller rockers & hydraulic lifters, AND HEI distributor, that looks like a eternal engine with fuel injection drivability.

@doughill4237 4 года назад

I'd love to see someone trick out an inline 6. I always heard about what a workhorse they are. Like to see what numbers they can pull torque and/or horsepower. We all know it'll never run down the drag strip but it'd make a Great stump puller !

@philtripe 4 года назад

they already did a Chevy 292... you might get the same torque with a few less HP with the "less revy" Ford

@basshead. 4 года назад

You'll get nothing and like it.

@massiveheadwoundharry6833 3 года назад

🙄 This episode was great till they said nitrous. Most guys, including me, aren't going to put NOS in their vehicle. Would've been better if they went turbo or supercharger.

@squidusn71 3 года назад

Price was the main point of this episode. You'd probably see more people putting in nos before they spend money on supercharger or turbo.

@jackpinnell3204 3 года назад

tubo's and ANY supercharger will be 10X what NOS will run you for a power adder!

@elisedonaldson3893 3 года назад

It's overkill but it's not a bad way to show the potential of what the engine can handle with minimal work and tuning

@deanf7086 3 года назад

What do you expect from a guy with 40 somethings in his front pocket.🤣

@Rick11231948 Год назад

You nailed it ...very cool

@79tazman 2 года назад

That's why I use hand tools to take the engine apart and to put them together if you used a impact taking them apart you can't feel how the bolts come out and you may miss something important that you would want to fix before putting it back together.