100% Plug & PLay Toyota Tacoma Underhood Lighting Kit + Hamerworx Light Brackets

Подписаться 67 тыс.

Просмотров 11 тыс.

50% 1

Installed some much-need under the hood lighting with some KC Cyclones and Hamerworx light brackets. So easy!
KC Cyclones: amzn.to/3mKF5jk
Wire Loom: amzn.to/3epqBT3
Zip Ties: amzn.to/3mYLxn3
Hamerworx Brackets: www.tacomaworl...
✔️→Awesome Tacoma Products: amzn.to/2YOWQ7R
✔️→Tacomaholics Anonymous Website:
tacomaholics.c...
✔️→Tacomaholic Gear: teespring.com/...
✔️→Patreon: / tacomaholic
✔️→SUBSCRIBE: goo.gl/AdMDQZ
→Follow me on Instagram: www.instagram....
→Join the Tacomaholic Facebook Group! / 863008420793324
Fan Mail? Send to:
Tacomaholic
PO Box 2246
Centreville, VA 20122
POPULAR MODS FEATURED IN MY VIDEOS
INTERIOR
AC Knobs: amzn.to/2DChAX3
Tactical Molle Panel: amzn.to/2K4mZXx
Weathertech Floor Mats: amzn.to/2Dle7eB
CONVENIENCE
Grid-It Organizer: amzn.to/2z91al2
Quick Fist Set: amzn.to/2PVXc93
Center Console Organizer: amzn.to/2FmlQvJ
Glove Box Organizer: amzn.to/2TcqmQb
Center Console Tray: amzn.to/2Dj4H3j
Tacoma Bed Mat: amzn.to/2Q1kMBi
Hood Struts: amzn.to/2Dp3nft
MAINTENANCE/PERFORMANCE
UNI Filter: amzn.to/2OI5psI
Fluid Film: amzn.to/2DEyh4i
LIGHTING
2nd Gen LED Kit: amzn.to/2Td2Wu7
Ditch Lights: amzn.to/2Q3bViQ
TOOLS
Trim Removal Set: amzn.to/2TcqaQX
Torque Wrench: amzn.to/2Q3bUvi
Floor Jack: amzn.to/2FlcdNJ
Jack Stands: amzn.to/2DDme7f
Magnetic Tool Tray: amzn.to/2QGv1s0
Disclaimer:
Due to factors beyond the control of Tacomaholic, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Tacomaholic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Tacomaholic.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@Tacomaholic 3 года назад

Interested in a 100% Plug & Play door speaker upgrade? Checkout my vid here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HHJ95TTmFk8.html

@stansbruv3169 Год назад

Damn! That’s nice. Well done. Thanks Tacomaholic.

@stevegunderson6506 3 года назад

I did this mod a couple of months ago. Using the same Hamerworks mounting brackets. One thing I did differently was I installed an automatic switch attached to the ground wire. When the hood opens the lights automatically come on. Works fantastic!

@Tacomaholic 3 года назад

I thought about going that route but seem to have the hood open more during the daytime anyway.

@stevegunderson6506 3 года назад

@@Tacomaholic Could always install an automatic switch but keep the manual switch as an override to shut it off in the day time. As always good vid.

@chrisshaw2769 2 года назад

Excellent!

@mjclementz85 3 года назад

Those are sweet. I don’t think I need them but must have anyways.

@octalicious 3 года назад

I know right lol? I preordered my 2021 TRD Pro and haven't even gotten it yet and I'm already planning mods to be done ha!

@tamer.abubakr 3 года назад

The underside of your hood is insanely clean! Looks good! Glad the kit worked out!

@Tacomaholic 3 года назад

Ha ha thanks buddy! Love the brackets. Simple Green for under the hood. 😃

@MPGunther1 2 года назад

👍

@troy3456789 3 года назад

Old Mercury Grand Marquis under-the-hood lights have mercury switches built right in (so they come on when you open the hood). I use to go to the junk yards and get them for next to nothing and install them in other cars or pickups I'd get. They only use one wire, because the mount attachment is grounded well enough when you screw it to a rib under the hood (to complete the circuit). A person could swap the cheap incandescent bulb with a bright efficient LED cob lamp to make them brighter.

@lizzoid 3 года назад

I was able to run the wires through the hole at the end of the bracket by pulling the clear cover back on the black wire...The black wire went through the hole then the red wire...I bought extra brackets to run lights under the truck with some very strong magnets I got off Amazon that have a small threaded rod that the bracket will attach to.

@bobbydmonkey 3 года назад

Dayum those are bright!

@Meeks3 3 года назад

Dude this is legit! Definitely going to be looking into this.

@inchranger 7 месяцев назад

that's cute...

@hungrybear1 3 года назад

I saw a post on Reddit and thought to myself "dang I really hope he does an install vid on this!" Haha. Thank you!

@ArbitraryLifestyle 3 года назад

Bought a $12 LED strip off of Amazon and it's at least that bright if not brighter. Cost me $22 total with wires and a switch.

@tamer.abubakr 3 года назад

That’s what I did originally but the adhesive wasn’t great and I was worried about it falling and getting caught in the radiator fan or serpentine belt.

@DirtyJobsGuy1 3 года назад

Wow, really nice!

@bamadave11 3 года назад

I'm surprised you're just now doing this.

@Tacomaholic 3 года назад

I definitely should have done it sooner.

@wadepauly7380 Год назад

Do u have a link for them brackets. Thanks

@Tacomaholic Год назад

www.tacomaworld.com/threads/3d-printed-rock-light-mount.669909/

@jeffnist9921 3 года назад

The rubber encapsulated nuts are called "well" nuts. The wiper grill cover is called the cowl.

@troy3456789 3 года назад

The hood was originally called an engine cowl; it started way back in the days of tractors. Jet engines also have cowls around them today.

@agfa663 3 года назад

I can't find the link for the installation brackets. Can you give it to me please?

@Tacomaholic 3 года назад

You just need to comment on this thread that you want a set: www.tacomaworld.com/threads/3d-printed-rock-light-mount.669909/

@lizzoid 3 года назад

I ordered the brackets and the lights...There is no hardware to attach the KC lights to the bracket...What did you use?

@Tacomaholic 3 года назад

If I remember correctly my KC kit came with hardware, but if not you can get something at a hardware store. Are you using the same holes in the hood that I used in this vid?

@lizzoid 3 года назад

@@Tacomaholic The hardware came for the Hamerworx Brackets to mount to the hood...What did you use to attach the lights to the bracket?...The washers provided for the screws to mount to the hood are too big to even go into the center hole of the KC lights...I hate when you have to go find something to make what you ordered work...I ordered some Ampper Rock Lights, they should fit the brackets.

@WolfK418 3 года назад

Your hood has shocks. my don't, I have to use a prop.

@Tacomaholic 3 года назад

Yep those are the Redline Tuning hood struts: amzn.to/3jZw04o

@mikemorgan8168 3 года назад

Boogie, how hard would it be to caption these awesome vids for your deaf and hard of hearing fans?

@Tacomaholic 3 года назад

I thought RU-vid was adding closed captions automatically, but I guess not so I'll have to look into it and see what's involved.

@Tacomaholic 3 года назад

Follow-up response ... I checked some of the last few vids I uploaded and closed captions is working on those, so I assume it just takes RU-vid a little while to get them added for a new video.

@WolfK418 3 года назад

What is the power tray and that black (source) box?

@Tacomaholic 3 года назад

That's the SPOD 6-switch relay system I installed in this vid: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-erotP050Tmg.html

@haljackson3580 3 года назад

Any idea what the current draw is on these? I figured that if you are using these for maintenance then you are likely doing so without the engine running. I was wondering how long you could burn them without significantly draining the battery.

@Tacomaholic 3 года назад

Spec sheet says 0.25-0.55 amps.

@timfrancis6774 3 года назад

you have faith in me? a guy who took 2 months to put aftermarket stereo in, am laughing cause i know you might be getting emails on how to do this or will be back to rewatch

@Tacomaholic 3 года назад

This kit is super easy to install.

@timfrancis6774 3 года назад

@@Tacomaholic I am getting 1 of those