1967-72 Chevy & GMC Truck Vent Window Rebuild/Seal Replacement 

Can't tell you guys how much I appreciate the videos. Being walked through it is so much easier than just looking at an exploded diagram and figuring it out yourself. These videos are pure gold.

It's great that with the right parts and a bit if instruction, we can make our trucks brand new.

Your videos are amazing, thank you guys so much for taking the time to make these step by step instruction videos. My 67 c10 would be in a much worse condition without you guys and all that you do.

Nice vid Dave. Only flaw was I wished was some zooming in on the small stuff for a better view. Other then that, excellent how to bro.

Very helpful video, fixing to tackle. Found parts on you're website , very easy to navigate. Wish me luck.

Great tips,excellent video,great patience..I would like to attempt this in my 1955.1 first series. Really appreciate your videos.

Wish I had this video 28 years ago. I did a pair on one truck and he told 20 friends. I did not see the punch you used to flare out the rivets but had a set of “Mathew” roll-pin punches. These punches are fractional I size, but have a “Half Ball” machined on the end. Designed to self-center on a hollow roll pin, but works great on rivets to tighten and flare out. I think I bought them from the SnapOn truck in plastic vinyl snap top package. Regardless of brand, if you do these, try “Roll-Pin” punches or grind one old punch to fit, It honestly took me 3+ hours my first time. I like the tape trick as I dropped a couple of packaged rivets the first time. Thanks for the video, info and tips as I learned the hard way! ASE Master Tech since 1978 - Retired.

Never thought that would be something important about noisy window vent although knew someone in 02 who had a 88 S10 Blazer with similar problem .You made this project look simple to take off not as easy putting back together @ least u didn't have take off door .

0:07 Enter video title here 😂👌. Thanks for the video. I learned a lot

AWSOME video but please keep bottle full 😀 Nothing personal 👍🏻 Thank you great Job -Sir

Dave is super cool mechanic💪💪

Great instructor

I have, the 68 GMC, same colour! Skittles, red-orange!

Great video.

Love this channel

Nice job. I found this task very frustrating last summer.

I have been through the online parts book numerous times and not found the complete vent (wind wing) window and channel assembly. I also have not found the complete door assemblies that have been featured on other videos. I am trying to rebuild my 78 Suburban and these are things I need to get as the vehicle was stripped when in storage. I am also planning to have electric windows and locks in the new doors.

Seeing a pattern that you leave the tricky stuff out...........lol

Hey guys ! Question, I rebuilt my windows, vents, everything on my 1968 c10 about 3 years ago ! The little pivot pin - on top where you open or close the vent window - broke, any suggestion on a fix without replacing the frame ? If I have to one side , might as well both ! Thanks guys, you all are awesome on these old trucks ! 👍

I just received this product an hour ago via UPS from you guys. My '67 already has the vent windows refurbished, so I'm doing this with my '69 this weekend, if I have the time. Doesn't look too bad to do. I received your flush fit side marker lenses last week and they look freakin' awesome! So much better than the bulky stock lenses! And the polished stainless tailgate protector I purchased that goes on the top rail adds some personality too. I have a question. Does Brothers sell the rivets to attach the grill fascia to the side and center brackets and the plastic inner grill section for my '69? Or can I use just plain old 1/8" rivets like I use on other projects? I haven't ground them off to check the size yet.

Once installed, is the rubber on the bottom of the vent window frame where it meets the top of the door, supposed to flare out and lay on top of the door?

Great video I might need to order some parts to restore my 67 c10

Mr. welch, thanks for give us this great video! My request is to ask, where do you get the rivets kit??? Regards.

Would have love to see the glass set into the frame, mine are gone to far.

My 68 C10 has rivets holding the vent window to the door. Can I convert that to screws rather than rivets? I bought the entire vent window assembly.

Great video, but you did not show how to get the upper section of rubber into the channel. You slid the bottom in from the end, but that will not be an option for the top. How did you get it on? Thanks

Once the vent window is installed, how can one prevent water from running between the vent window rubber and the door metal? I have about a 3/8” gap at the bottom of my vent window.

I have to replace just my vent glass can I take out the rivet where the glass privets at when you open it , I got another door because my old one is rotted, the replacement door does not have the vent window in it.

Where can I find the orange paint used on that truck?

Can i do tge rubbers eithout disassembling al of it?? I bought a kit and it came without rivets

Where do I get the little flaring tool?

What size are the rivets?

How do you remove the lock on the vent window

Where can I get that exact rivet punch???

Coronavirus lockdown projects!! Lol!

my teacher is making us watch this and write a paragraph about it

ENTER VIDEO TITLE HERE

Do you sale parts..I call last week and some Lady tell me then you don't sale part's o need the revets kit bag