1970's Cub Cadet Tractor sitting MANY years (Engine Stuck) WILL IT RUN???

Подписаться 767 тыс.

Просмотров 1 млн

50% 1

Saved this old gal from the scrap yard, engines stuck, is it fixable?
-Follow me on Instagram & Facebook @dieselcreek to see what I'm up to before it hits RU-vid! #DieselCreek
-Help support the channel using these affiliate links!
American Made tools from IPA Tools here: ipatools.com?ref=861
or
Get some sweet gear from Yankum Ropes here!
yankum.com/?afmc=dieselcreek
Plus use the code dieselcreek at checkout for 5% off your purchase!
-If you’d like to help get the Autocar back on the road you can help out here: / dieselcreek
OR send a One Time Contribution Via PayPal to DieselCreek@gmail.com
-Custom Music made for me by Vinnie Longhi of the Semi-Supervillains
Check them out here: / tssvision
-Wanna send me something? sent it to:
Diesel Creek
P.O. Box 109
Burgettstown PA 15021-0109
#Kroil

Авто/Мото

Опубликовано:

5 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,4 тыс.

@dombooth86 3 года назад

Honey the crazy neighbour is mowing the grass in the dark whooping like a banshee 😂😂😂

@DieselCreek 3 года назад

Yeah, I can’t figure out why my neighbors don’t like me 🤷🏼‍♂️🤦🏼‍♂️

@brycehickman6841 3 года назад

I’m from south Texas like actual south Texas crack neighbor would shred his sand at night with a headlamp 😑 or cell phone light

@johnlorraine4978 3 года назад

I thought the same. But I guess they are doing the same :))

@donutlivesmatter 3 года назад

@@DieselCreek I was wondering if you shook her house again😄

@jaysonbarnett1989 3 года назад

The wife: Again?!

@paulriggers1558 3 года назад

"hey dear, whats that noise outside?" "oh its just that crazy matt from next door mowing his lawn in the dark on a tractor with no lights" "thats ok then, i thought it might of been something strange......."

@DieselCreek 3 года назад

😂😂😂👍🏼

@bobadam7021 3 года назад

Thought the same thing. "It's just that idiot next door mowing his lawn in the dark in front of a camera."

@dans_Learning_Curve 3 года назад

Seeding dandelions!

@paulluggar5964 3 года назад

Has 15 or so Cub Cadets but needed this one to cut the lawn! 😁

@SteifWood 3 года назад

@@DieselCreek Here the police would fine a neighbor for "noise pollution" (even jail if serial offender).

@paragonpartners2058 2 года назад

I like a guy who says "Contact!" before turning on a vacuum cleaner.

@garymarshall220 2 года назад

Learn something new on every vedio this one taught me the term "dry as popcorn fart" wonderful. This will extend my vocubulary. Thanks love these old tractors.

@Sundog0811 2 года назад

He has borrowed much of the vocabulary of AvE RU-vid channel. Contact, geezlus, gabage, vineage, chineseium, son of a diddly, and many others. Admittedly, It's hard not to adopt, it's very catchy.

@nevillegoddard4966 2 года назад

Yeah para, the good thing is he spares us a countdown!

@pjacks4373 3 года назад

Great video. I am 80 years old and still got my 104 that I bought new in 1968. Still original, runs good and gets used about every week in the summer.

@adrianphillips6238 Год назад

🎉😊😢🎉😮 5:53 😢🎉😮🎉😂😮😢😮😢😊😂❤

@adrianphillips6238 Год назад

6:57 6:57 😊🎉😂❤ 6:58 7:00 😮😮🎉😂😮😂😂😮🎉😢😢😮😮😢😮😢🎉😮😊😢❤😂😮😂😮😢😢😮❤😢😢😮🎉😢🎉🎉😢😮😮❤🎉❤🎉🎉😮😂 7:18 😮😢😊 7:19 😊😊😊😢😢😢😢😮🎉😢😢😮😮😢🎉😮😮😢😢😮😮😂😮😮😢😮😊🎉😢😮😢😮 7:31 ❤😮😮😢😢😊😊😢😢😅😮😮😮😮😢😢😮😢😢😢😮😮😮😢😢😮😂 7:43 😢😮😂😢😂😢😢😢😢❤😅

@adrianphillips6238 Год назад

❤😊❤😊😮😮😊 7:54 🎉😢❤ 7:56 😢❤😢😢

@adrianphillips6238 Год назад

😅😮😊😂❤😊😊❤😊😢😮😊😂😢😮😮😮😮😢😮😮😮😮😮😮😊😢😮😊

@adrianphillips6238 Год назад

😊😂😊

@cmleoj 3 года назад

You pulled off the flywheel and I thought: “ Urine trouble now!”

@EngineeringVignettes 3 года назад

Ba-dump ... bump.

@abzdeman92 3 года назад

5:32 dryer than a popcorn fart. lmaoo I'm dying

@nevillegoddard4966 2 года назад

Me too abz. Or does it mean so dry like your fart was actually made of popcorn? Dun matter, any kind of popcorn fart imagery is fukn funny! Lol!

@elmermason9685 2 года назад

You look happier than a kid on Christmas morning. Great feeling when you bring back to life an old piece of machinery. Great job. Thanks for the video.

@Davidwhite-kd2mp 2 года назад

@stephenwagener349 3 года назад

This is NOT NORMAL. A restoration that goes smoothly, not setbacks ,no broken seized stuff, no hidden disasters - NOT what we are used to. Well done mate. Good show.

@kurtisworkman716 3 года назад

Wel, there was that one bolt..😂

@haywardstewart2825 6 месяцев назад

That’s because it’s American made !

@cujoedaman 3 года назад

Wait, a 50min video about a lawn mower and you're teasing us about a barn with treasures inside? I thought we were friends here!

@575conbon 3 года назад

"lawn mower"...thems are fighting words

@joshnabours9102 3 года назад

What do you mean? We are friends.

@harrisonmcgill2307 3 года назад

It a garden tractor not a lawn mower.

@jamesanderson2176 3 года назад

@@575conbon Anyone who doesn't think these are real tractors should measure the turning radius. Our Super M turned tighter.

@sarahmathias9463 3 года назад

@@575conbon It's a lawn mower. It mows lawns.

@arcanask 3 года назад

23:00 I can feel the hanta virus entering my lungs through the screen. 💀

@jerryc3050 3 года назад

I saw this comment while I was spooling, and I thought "doesn't this have a bad virus associated with it?" Googled it and it is bad.

@garymallard4699 3 года назад

@@jerryc3050 Rodents crawl all over everything you buy ..at some point...lol Life is not as clean as you think

@nathanhutton3164 3 года назад

And I feel the Han-ta enterrr my vei-eins

@michaelbenoit248 3 года назад

Philip Brucker, this is the one time I would encourage someone to wear a mask, because it can protect against it.

@Kentboy05 3 года назад

@@garymallard4699 Its not the mouse touching things its the throwing their feces into the air and then breathing it. HPS is nothign to fuck around with it has a mortality rate of 38%

@davidsnow1481 3 года назад

Unbelievable that engine had been sitting all those years and still runs like brand new. Kohler engines are one of the best lawnmower engines out there. Keep up the good work and stay safe out there.

@johnking8679 2 года назад

My parents managed a small country hotel in Rhodesia (now called Zimbabwe). We had Kohler diesel engines running a large generator producing our electrical needs for our General Store, fuel (gasoline and diesel retail pumps) Grinding corn for the locals and a second one for pumping water for our use in and around the hotel. Very reliable engines and somewhat economical. Easy to service and repair when they rarely broke down.

@donniecoleman1324 2 года назад

Well, I’m glad you had a good experience with them I’ve not been so lucky with them the Koehler command was a good engine.

@seanmoore6397 2 года назад

I’ve work on mowers a lot the best engines I’ve worked on were Kawasaki and kubota. Briggs and Stratton and Kohler aren’t close to being in the same league

@jhitt79 Год назад

@@seanmoore6397 you’re comparing apples and oranges. These older k-series Kohler engines are bulletproof.

@colinnapier6662 3 года назад

I think it is fantastic how easy you make it look to get all these machines operational.

@Dratchev241 3 года назад

oh great, our wackadoodle neighbor is now mowing the yard in the dark...

@scottc6982 3 года назад

Only tweeker's do that were I'm from.

@thadsmith2889 3 года назад

Are you my neighbor?

@raymond8875 3 года назад

@@scottc6982 I do all my farm work at night as I live in a desert and have a full time job. And yes my neighbors think I'm a tweeker. But heat stroke sucks, I don't want skin cancer and I don't have AC. I would talk to them about it, but I don't associate with tweeker's either.

@chaddleix188 3 года назад

I do that also and I'm not a tweaker or a wackadoodle. Some of us work fucked up hours and don't have any other options, unless you like looking at a hay field. I guess I'm whatever words you wanna call me also lol. Sticks and stones men, or woman I suppose

@chaddleix188 3 года назад

@@raymond8875 I like the way you think👍. My grandfather was a multimillionaire farmer and he did the same as you. Smart ppl think alike. Who cares what any of these dipshits think of you or I.

@scotduckrow8524 3 года назад

You have enough cadets to start a military academy!

@j81851 2 года назад

Matt I have watched a dozen or more of your videos and have concluded you are a fine young man, with a work ethic 99% of young men your age would do well to pay attention to. I cannot tell you how gratifying the videos are. The Abandoned Church concrete foundation repairs were riveting to me. I am particularly fascinated with concrete so that was right up my alley! Please keep the videos coming I will watch every one! Keep up the good work!

@ernestvaillancourt5828 2 года назад

Bought one 4 years ago, needed a new carburetor and has never stopped since. Good machines.

@wakeupamerica2971 3 года назад

Why on Earth would you wish that smell upon us?? I thought we were all friends here. lol Thanks for another great video.

@marcryvon 3 года назад

Been watching Mustie1 for years and his battle with rodent piss smell. Now Matt. Tought it could'nt be that bad... Did a pre-season check up on my mower taday. Rodents lived in it this winter for the first time ever... Now I know, it DOES SMELL that bad !! 😱 🤮

@unluckyirish2763 3 года назад

Thankfully youtube doesnt have Smell o Vision.

@nevillegoddard4966 2 года назад

Yeah I felt my nose screw up involuntarily when he took the big cover off!

@ivankrzanic4241 3 года назад

Just a friendly warning: when ever dealing with mouse housings, use proper safely equipment due to mouse droppings can contain mouse fever... you can inhale the dust and get really sick, it’s a thing so be careful!

@JimsNBHomestead 3 года назад

Henta virus is deadly for sure

@whotknots 3 года назад

Rodents in general can also carry a bug called 'Leptospirosis' or Weil's disease which can be fatal. Not that long ago a Canadian guy caught it from the top of a contaminated soda can and died.

@nigelbaxter6525 3 года назад

He won’t have to worry about the mouse fever if he keeps lifting engines around like that. He’ll have knackers like footballs and degenerative discs in his back.😳😏👍🏻

@toddavis8603 2 года назад

International Harvester is all American as Diesel Creek!"No bad smell here, TY.I have not ridden a cub cadet since I was 8, and now I'm 60!

@williamw7462 2 года назад

Infinite patience. Nothing is too much trouble. Failure is not an option. Admirable!

@rapitupthatsarap6681 3 года назад

You've gotta love that older machinery...they built things to last and with pride back then.

@johnwudarcki9315 3 года назад

Compared to our designed obsolescence/ throw away society

@danbasta3677 3 года назад

Very true. This is why I have all older tractors, not any of this new stuff that's offered out there including this zero turn radius go cart mowers with mower decks on them. They are an accident ready to happen.

@JamesJackson-dq2tj 3 года назад

Great memories. My grandfather had that model. It was the first riding mower I can remember using. Being ten years old and turned loose to mow two acres. King of the world I tell you. Great find!

@CraigZeigler 2 года назад

My grandfather had one of these too and I remember as a kid helping to plow snow with it.

@johnpayne7284 2 года назад

your neighbors must love you -mowing you're lawn at 10 pm haha love it!!!

@garybrady9531 Год назад

Went back for nostalgic reasons you've come a long way from home to a nice new shop,thanks for taking time to make videos

@RoelvandenBergWillemWasbak 3 года назад

Just when i thought i am bored out of my mind, You upload a new video of almost 51 minutes. I enjoyed every minute and think that sometimes only a thumbs up isn't enough. So thank you and kudos for reviving that barn found tractor. She spins like a happy cat!

@dmille22 3 года назад

I couldn't help but laugh when Matt was describing the tools you need to work on the Cub. Not a dreaded 10mm in site.

@jbbuzzable 3 года назад

Before You Tube was a thing, I thought the 10mm was just me.

@joebrock9784 3 года назад

MABLE mystery oil atf

@richardbrown8794 3 года назад

Can't beat them old kohler's.

@jbbuzzable 3 года назад

@@richardbrown8794 You can beat them, but they don't die easily.

@ColinRichardson 3 года назад

8mm x1, check 9mm x1, check 10mm x9, ALL GONE 11mm x1, check Still not enough 10mm

@tireddad6541 2 года назад

My father had a 12 hp Cub, with lawn mower, snow plow and rototiller and trailer. I can't believe how many memories it brought back. He had taken it apart and rebuilt about everything on it. One time, we went to get a new belt, and tge clerk at the parts store made a comment hard to change or something. My dad responded he had rebuilt just about everything. The guy didn't believe him. So he started asking questions. My father answered them all, knew more about that engine, transmission, everything. And he did a lot of maintenance whole recovery from surgery for kidney stones, etc. He was mad, smart aleck guy, he said. But after that they respected him.

@ryanaustin2617 3 года назад

I love your channel. I'm not much of a mechanic, but love to see people restore stuff. It's a lost art, people nowadays throw everything to the trash and don't even attempt to fix anything anymore.

@viperBSG 3 года назад

$50.00 a little work and you have a really nice rider mower. cant beat that!

@DAPwny 3 года назад

Man i thought i was the only person who loves the old cub cadets nice job Mat

@danbasta3677 3 года назад

They ARE built like tanks, very reliable tractors, the good ole International Harvester Cub Cadet tractors. Can't say that about these MTD tractors of today, that's for sure.

@clikzip 3 года назад

I have never heard of a needle scaler. After seeing that work I immediately ordered one. Thanks 👍

@jeancornelis8292 Год назад

The pure excitement (from and Matt and me !!!) whenever a engine fires up after a long sleep.....live it to bits. Grtz, Jean , France.

@gasgasgas 3 года назад

17:20 - Our friend shows off his quarter sheet of 3/4" plywood he uses as a temporary bench! That's probably $400 worth of wood. lol

@DieselCreek 3 года назад

😂😂😂😂

@jbbuzzable 3 года назад

Just an FYI. Don't carry a chain on the floor of that forklift. We had one just like it at work. The chain worked its way through a hole in the floorboard and was caught by the driveshaft. It took the maintenance department well over an hour to remove it.

@JimsNBHomestead 3 года назад

Or it gets under the pedals

@jimlong527 2 года назад

Watching Matt work with a Corona in hand. Never disappointed.

@alanbierhoff6831 9 месяцев назад

That was a beautiful thing to watch 😊 Well, he started the video saying you only need 3 different size wrenches to work on a tractor like this…. 87,000 tools and a torch and pressure washer later and he’s still beating on it 😆

@aslkdfjhg 3 года назад

As someone who grew up in the suburbs I never knew how damaging mice can be for farmers. It is absolutely astounding.

@CharredSteak 2 года назад

Had multiple mowers over the years, all have had electrical problems from mice. Worst was a kohler vtwin that needed both ignition coils replaced. Ironically, parking them outside seems like the only solution to keeping them out lol

@dozzed 3 года назад

48:15 big respect for your neighbours not going crazy from Matt driving his 12hp oldass lawnmower at fricking pitch dark night time xD love it!!

@DieselCreek 3 года назад

It’s actually pretty quiet in person lol

@CAPNMAC82 3 года назад

@@DieselCreek And, as a guess, the neighbors are more than 20' away, unlike in some towns

@dozzed 3 года назад

@@DieselCreek wow!! Haha i was kinda guessing by how crusty some parts were that it would do some noise 😆!!

@DieselCreek 3 года назад

@@CAPNMAC82 closest neighbor is about 50-60’ from the shop door

@steved2136 3 года назад

@@DieselCreek So really close then LOL- looks at nearest neighbour only a mere 900 ft away...

@davidalbrecht7659 Год назад

A new quote of the day; "drier than a popcorn fart". Thank you, Matt!

@iggyp7049 3 года назад

Love those old tractors, back when things were made to last.

@kinasc1575 3 года назад

I love seeing old machines brought back into life, well done Matt.

@ronaldbeatty1887 6 месяцев назад

And not a fist full of ignition inter-locks to deal with.

@person86422 3 года назад

That was pretty satisfying when you were pressure washing and all of the sudden a yellow differential and axles appeared

@VK2FVAX 3 года назад

Surprise!

@charlesangell_bulmtl 3 года назад

You said chisel, I thought UGH. You showed up with the needle scaler, I said 'There you go!' I cut strips of wet and dry sandpaper + paper strips for final clean of the points. That new air filter was what I was waiting for!

@jeroen3946 3 года назад

You’ve got the paint like the one for Christine 😉👍

@Bodhranarama 3 года назад

Those old Kohlers were overbuilt and we love them for it.

@unclea8148 3 года назад

Crank bearings in them are giant and actual bearings not stupid bushings. Love the old stuff

@k1n2g4 3 года назад

We kohlers still overbuild everything.. not a joke. My name is Köhler 😁

@richardthomas5466 Год назад

That one looks like the one I used to mow the yard with as a kid growing up on a horse farm in central Illinois in the mid 70s. Man I miss that mower.

@nopriors Месяц назад

Just think of how many babies Mommy and Daddy mouse raised. They didn't mean to mess up the engine. Just think about how fortunate you are to be able to spend the days of your life doing something you love. Your smile and satisfaction at the end are just awesome. If you haven't sold this I'll buy it. This is the best video I have ever seen on RU-vid. Peace Greg

@slicksiderepairllc2822 3 года назад

The look of pure happiness on your face when it moved cracked me up nice job 👍

@paulluggar5964 3 года назад

Use the old seal to tap in the new one! :)

@badasssamurai4954 3 месяца назад

Hi Matt Just going back and watching a couple older videos... Hope all is well with you and your family 🙏. Missing my favorite channel!

@AntonioClaudioMichael 3 месяца назад

Wow at how Clean the Engine Compartment became after that cleaning Matt 😮 39:41 @Diesel Creek

@vikingzombie2487 3 года назад

This guy is a mad scientist. Who knows what he’ll bring back to life!

@theproblemchildpulling4641 2 года назад

The kohler engines of this era are very reliable. My 1970 Cub Cadet 147 sat for a few years and got a carb clean then it ran. My sister's 1967 Cub Cadet 122 got a motor from a whole different tractor (cub cadet 125, same motor tho) and that 125 sat outside in the woods for a year or so and fired right up.

@freethought2296 3 года назад

Part of the fun in watching your channel is watching you get so excited when you get a crust old piece of machinery running again. Keep em' coming!

@user-ft8wr6le8d 8 месяцев назад

Howdyyawl from the land down under. What a barn find. With a bit of imagination, elbow greese & understanding how things work, youve shown your viewers your absolute joy in what you do. Satisfation guaranteed Thanks for sharing😊.

@jarheads88 6 месяцев назад

I just bought a Cub Cadet 2072 in running condition it is a beast ! I think every time you smiled I as right there with you, great video well done, happy for your new ride !

@jds2277 3 года назад

The noises you were making when trying to describe the stench - hilarious! I caught myself covering my face while watching the video. 😂😂😂

@RC-fu6hg 3 года назад

Nice video brings back memories My parents had one from the seventies manual gearbox with tire weights and chains. I Used it to cut grass and plow snow. That tractor was bullet proof and never failed. It was 33 years old and still running when they replaced it with a new model.

@DieselCreek 3 года назад

Then why replace it 🤷🏼‍♂️

@dontrend5956 3 года назад

My father bought a Model 126 in 1970. I still have it and use it for mowing.

@dennisvertrees4001 Год назад

I have a model 86 my dad bought when I was 5 mowed on it every summer until I was about 20. He and I did a frame of restoration on it that winter rebuilt the 8 HP Koehler and it ran like a top for another 7-8 years. Pop died and Mom had a bad heart the same year no time to work on it I bought another Cub a new MTD . It’s been ok . I still have the model 86 will get the gear drive rebuilt one day I hope to mow with it again before I am done. I will be 59 next year. Matt love to watch you work you are a quality young man and a hard worker too.

@no_handle_required 2 года назад

man, I love when you take dead stuff and make it live. Pure satisfaction.

@daveharper5655 3 года назад

It really warmed my soul when I watched you rebuild the mower, my grandfather had that exact tractor, with headlights on it. It was working perfectly after 30 years of work when he sold the property to someone, and to this day is still being used. Keep doing what you’re doing.

@2badger2 3 года назад

"Vice Grip Garage" uses emery boards. He just doesn't let his wife know ... hahaha

@walterwhitaker1395 3 года назад

ME TOO! LOL!

@bmacd2112 3 года назад

What they don't know, they can't get pissed off about! LOL

@robinwells8879 3 года назад

With that huge dynostart unit you should install an inverter and it could also serve as a mobile mains power generator! She must have lived a charmed life so far.

@oldroscoe2590 3 года назад

Great video, you make it look easy working on this thing. I doubt I'll every have an old Cub Cadet to work on but if I do I know where to look. It's a shame how many lawn tractors wind up in the scrap yard, especially the old heavy duty ones.

@tomwinkle1597 2 года назад

The last 1 I had I was wanting to rebuild the motor and Briggs and Stratton did not have a kit for sale. Ticked me off. I had new tires and blades and starter and battery.

@garyk. 3 года назад

We used a lot of those eccentric collar bearings on the air handling units at the hospital I worked at. Mostly on fan shafts. Been around a long time, old tech that works fine.

@MickeyKamer 3 года назад

My Grandfather used to work at the Louisville Ky plant making parts for these. It is great to see how well things were made back then, people expected years of like out of their tools, not like today (or most of the MTD residential stuff) as it just doesn't last.

@unclea8148 3 года назад

Mickey do you have anything of his from there? Very cool that he worked there, love seeing the old pictures of the assembly line there

@notajp 3 года назад

MTD: Major Turd Design......

@danbasta3677 3 года назад

@@notajp Exactly. International Harvester's worse mistake was selling off their tractor line to Machine Tool And Die.

@roguedalek900 3 года назад

The IH and Allis were spendy in the day but very much a premium product.

@AntonioClaudioMichael 3 месяца назад

26:43 that kroyal Degreaser Is impressive With just using a garden hose Wow not bad for not using a pressure washer for Sure Matt 27:20 @Diesel Creek

@mikeyoung7022 Год назад

Excellent description of "How To". I had a 62 Original I dragged out behind some farmers home years back. Got it home, wouldn't run. Pulled the head and with rubber hammer loosened the stuck valve and lubricated it. Stuck old head, old head gasket original plug all back together and it fired right off been using it for over 20 years now. Your video shows how good a Kohler engine really is!

@jailbreakgamin1966 3 года назад

i remember those tractors well.. back in the 60s and 70s when u bought a tractor it would pretty much last u a life time ..same with the john deeres

@UniqueBreakfastTaco 3 года назад

still have an 81, 109, 124, and a 149 hydro. these old cubs are great mowers.

@danbasta3677 3 года назад

You just cussed at me saying, john deere. Never liked them.

@randybourdon2791 3 года назад

Runs as smooth as a new machine Matt, well done!

@vincentl.8145 3 года назад

I miss a belt slip though....

@johnvanhal2450 Год назад

I'm a Dutch city slicker, know nothing about farm equipment. And I mean nothing. Still I'm fascinated by your channel. I guess I just like old barns, shops and fiddling around. I was a trucker most of my life, retired now due to illness. Maybe that's the link, because I was used to work under primitive conditions, driving to Eastern Europe and Asia. Had to do a lot of repairs myself down the road. Anyway, keep them videos coming, I really enjoy them.

@snikesnover1831 2 года назад

I grew up on one of these old tractors as a kid, they really are bullet proof.

@esqueue 3 года назад

My "will it run" fix. I love these types of videos.

@Jbelfort94 3 года назад

Looks like a great platform for a restoration. Always liked the looks of the older cub cadets.

@noelguerrero2770 2 года назад

You looked like a kid trying out his new toy at Christmas. Am green with envy here. Love to fully restore something like that.

@geraldschilli8870 3 года назад

I have a 1970 106 Cub Cadet. Nothing fancy but it runs good & is worth restoring. You can’t beat those old tractors. They sure don’t make them like that anymore.

@jamesburkhardt5143 3 года назад

"She's drier than a popcorn fart" ...new one to put in the arsenal

@christianvolpato7579 3 года назад

I'm sorry but what's the meaning? When you eat popcorn your fars are dry? 😅 I'm not american and i never heard this type of joke 😂😅

@garymallard4699 3 года назад

@@christianvolpato7579 Popcorn is kinda dry by itself...butter makes it wetter ..so basically it would be a Dry Fart with popcorn alone.... Not really a North American joke but i heard it before.....

@mrboomboombaby 3 года назад

Ayyyy, suddenly a fantastic day! Been having Diesel Creek withdrawal symptoms this week

@mrtomdorn 2 года назад

I was about 10 and Dad brought home a new 1963 Cub Cadet on my birthday 06-27-1963. It was the king of the garden tractors. My friends had Wheel Horses. That's how we got around in the woods and places. There were no 4 wheelers or motor cycles. I currently have a restorded 1965 Wheel Horse hydrostatic with a 12 hp Kohler industrial motor. I like it too. TD Atlanta

@ronaldclark2624 3 года назад

Congrats. I was born in 1939 and I am also still running as are many of us even older. Ron

@johnminto7723 3 года назад

It never gets old to hear those motors pop off after a little work on them!

@m2hmghb 3 года назад

I wish I had the energy to do this stuff. I'd love to get a cheap rider and fix it up, mowing 2/3rds of an acre when you have chronic fatigue syndrome isn't fun. Thanks for the vid Diesel, I love seeing you wrench on the old iron.

@stevelacker358 Год назад

I still have the 1966 JD 110 that I drove as a kid in the late 60s to early 70s. My granddad became a registered JD lawn tractor dealer but passed away in 1967 shortly after receiving his first piece of inventory… which my folks never sold. They used the heck out of it, and I even rebuilt the engine once (my first engine rebuild around 1975). It ran up until the early 90s until a ring broke and compression went away. I’ve gotten inspired to restore it a few times and collected some parts including a spare K181S… and this may have just motivated me to get back to it for real. I always kinda wanted a Cub Cadet to go with the JD so I’d have an example of each of the two original lawn tractors, but I don’t really have the space.

@Toolboxboy69 2 года назад

I didn't think it would run after I saw that nasty rat's nest but after looking at that very clean gas tank and Carb I was very optimistic. Great job!

@HankJr. 3 года назад

I love watching revivals like this. It’s so satisfying to see a piece of equipment especially one as solid and well built as this one saved from heading to the scrap yard. My father has a 1965 Allis Chalmers Big Ten lawn tractor, it is one of the best pieces of yard equipment I’ve used. He built a bucket for it as well as a log splitter he recent just finished building. He also has a tiller, deck, blade, and and snowblower attachments. Such a simple, universal, very handy piece of equipment.

@harrybursell9349 3 года назад

Hey, you really went to town on this ole girl and got her running again. Great stuff.

@Rev-D1963 3 года назад

Grandpa always said "Son, if you want a mower, buy a Snapper. If you want a GOOD mower, buy a Cub Cadet"! That's all I ever saw him own. I've got a new one (Cub) myself, but do fully appreciate the old ones. Thanks for the great video, glad I found this channel. Be well, stay safe and God bless. Rev. D.

@elbertfreeman8124 2 года назад

Set screws locking. "Stacking" on top of each other like "pancakes". Excellent practice! Eccentric locking collar/inner race, to set back in locking. I held Allen's key in set screw and turn shaft in direction of operation. use punch/chisel to complete locking onto shaft surface, lock in position with Allen "setscrew". This helped me to remember direction for locking collars/races!

@mundanestuff 3 года назад

You just use an emery board and when you're done cleaning the points, you put it back in the top left drawer of the bathroom vanity where you wife keeps it for you

@davfrui 2 года назад

LOLOLOLOLOLOL 😆!!!

@davfrui 2 года назад

Tell him to paint flywheel AND. STUFF so he doesn’t smell Like ass when he goes in for supper.. WIVES HATE STINKY MEN ESPECIALLY WHEN IT SMELLS LIKE RAT PP

@munched55 3 года назад

I'm a sucker for a happy ending. 👍😉

@d.pierce.6820 2 года назад

I just dragged a '65 Model 70 home-it once belonged to my neighbor, and then my Dad bought it from him, and it spent 20 years or so at his place-now it's mine. It took very little work to get it running well again. It has a blade and tire chains, so it will be a back-up snowplow on my place.

@glynn7160 3 года назад

You are GENIUS! I used your slide hammer trick today. Worked like a charm. I've never removed a seal so easy or used the tool I've had for years. Thanks. We love the channel.

@michaelthompson7570 3 года назад

Had a cub,,used to me in the late 1970’s Mower and snow plow,,great machine!

@aaron1140 3 года назад

Let’s see your collection of them! I love seeing cubs. I’ve got about 18 of them. Very addicting

@XPFTP Месяц назад

look how far he has come in 2 years. WOW

@jurgenkuhlmann9194 3 года назад

Hello Matt, at 35:10, just a layman's tip: how about using a 3/4" or 1" piece of tube to get that seal in? Like that, you would keep it from slipping away. Cheers!

@WatchWesWork 3 года назад

I have an MTD Cub Cadet. Can confirm...

@DieselCreek 3 года назад

Hahahahaha get you a nice old one buddy! Mow in style!

@leonardomigot4040 3 года назад

@@DieselCreek sorry but this diesel engine will not run and start and glow

@joe1988 3 года назад

I have a super lt1554, it no where near as tough as my 1812, but still a pretty well built mower.

@ericronco5560 2 года назад

@shobud7561 2 года назад

If you have a MTD Cub you have a pile of junk .

@robertburns3014 3 года назад

Another victory for the Diesel Creek Team! Nice find and nice work, Matt. 👍

@Fresh-tw7ev 3 года назад

Dad always had a Cub Cadet. Good memories.

@tjjewell4115 3 года назад

The last time I responded you told me that Kroil was too expensive, I am happy that you are using it now, LOL, TJ

@jamesanderson2176 3 года назад

I've got a mid-70's 1250 sitting in a storage shed myself. I'd love to find time to resurrect it.

@robertheinkel6225 3 года назад

I went to a farm sale, where they had a 1250 I was interested in. The rod was broke, and hydro disconnected and exposed. The deck was a mess. They made one good one from a pair of them, and were selling the one that was junk. It sold for over $1000 to someone who had no idea how bad it was.