1972 Corvette Stingray Anti-Theft Alarm Repair & Overhaul

Подписаться 1,2 тыс.

50% 1

One of the common issues with C3 Corvettes are non-operating Burglar Alarms. This video shows the removal testing of the horn and it's teardown. Bench testing of the components as a system. Repair of the driver's side switch assembly. Reinstallation of all the components and testing it on the car.
Horn Removal 00:05
Bench Testing Horn and Teardown 01:34
Bench Testing the Circuit 06:53
Door Pin Switch Assembly and Installation 9:45
Horn Installation 13:43
Lock Cylinder Installation 15:13
Flasher and Latching Relay Installation 16:30
Testing the System 17:22
Theory of Operation 18:30
Wiring Diagram 18:34
Assembly Drawings 18:39
Information Sources 18:44
Parts List 18:49
#c3corvette
#c3stingray
#1972stingray
#c3brakes
#c3radio
#c3numbersmatching
#c3windshieldwiper
#c3antitheftalarm

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3

@tjhicks5574 Месяц назад

How did you get your fabricated bracket and nut into a position to rivet into place? Did the piece fit through the tiny hole in the access compartment or did you insert the plate through another opening? Thank you very much

@MikeHammill-TheShop Месяц назад

I used a scrap piece of wire that was knotted at one end. The knot was on the backside (welded side) of the bracket and through one of the rivet holes. The wire/bracket was then just pulled through the compartment and the B pillar. If that doesn't make sense, let me know.

@tjhicks5574 Месяц назад

Thank you. I think I understand. You went through the wheel well access panel, then used the wire to pull your bracket the the small circular inside the access panel opening /pillar (size of a 50 cent piece) to get the bracket over the exterior part of the body in order to rivet it into place. I originally thought I would just be able to place the bracket inside the access compartment to rivet the bracket to the outside. I didnt realize there was another small compartment only accessible via that small 50 cent piece sized hole. I looked all around to figure out how to get the bracket against that outside of the body. I will give it a shot to go through the small hole. Thank you