1991 Toyota Pickup Brake Pads 

Thanks for the info! Going to do this job this week-end I got same model year pickup, super annoying to find right info when "95 toyota pickup" only shows first gen Tacoma results.

Your welcome :)

I've seen some in my area that look brand new.

I am sorry for your loss.

Glad the video helped out.

@@tubejim101 Got the brake pads on without any problems Jim. They were quite easy to replace.

Your welcome. Hope the video helps.

Your welcome

Your welcome :)

How do you take the rotors off, if they are bad?

@@tubejim101 no. Actually on checking the rotors if they are in good shape or they have to be turned before putting on the new pads. And if so How you would check the rotors because I’ve heard fro auto parts if you put new pads on random rotor and the rotors have some sort of defect or are Grooved they can damage new pads right?? Not sure if I’m correct let me know what you think …?

@@jonathanmartinezdrummer7830 Many auto parts places will not turn rotors anymore. They just recommend replacing the rotors if they are bad. As long as the rotor is still thick enough, and does not have deep groves in it, you should be fine. You can usually tell bad rotors, because they will have a lip that forms. If the edges, are thinker then the center, it is time to replace them. Some cars it is easy to take the rotors off. You can take them in, and they should be able to inspect them for you.

Just pushing the pad towards the piston.

If your talking about the clips the brake pads sit in, just go to the auto parts store. They might just give you some, but if they charge you, you can just buy the clips for inexpensive.

Would need to see what your talking about. Do you mean it had two top clips? Maybe the last person did not see the old clip, and put another on top?

@@tubejim101 quick response, thank you... After searching for the part, turns out they are wear indicators. You can search 47771-22030 and click google images. There are pictures of the part there.

I don't know. If I where to guess, I would guess no.

I believe it is 90 ft lbs. But you will want to double check.

@@tubejim101 what brake pad brand do you recommended? What did you use on the video? I am considering the Bosch quiet cast

@@John-co2yz Akebono amzn.to/3de0M9r

@@John-co2yz I just used some cheap ones from www.oreillyauto.com/

If I was to go cheap, here are some good pads: amzn.to/2JTOpxg

Did you get it out?

@@tubejim101 👎

@@flyprincess69 Get yourself a left handed extractor set. Something like this: amzn.to/3xpphx2

Pfff, that is for sure. Wish that IRS saw it that way. They like to take money from my zero business.