Тёмный

1994-02 Honda Accord 2.2, 2.3 timing belt replacement 

Rust Belt Auto
Подписаться 52 тыс.
Просмотров 183 тыс.
50% 1

How to replace a timing belt, and water pump, on an f22, or f23 4 cylinder Accord. This is the same Aisin kit #TKH-006 for some Acura CL, and Odyssey vans with the F engine within these years.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
liter L 1995 1996 1997 1998 1999 2000 2001 2002 95 96 97 98 99 00 01 02

Опубликовано:

 

6 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 268   
@TheCloser1
@TheCloser1 10 месяцев назад
This is the best timing belt video for a Honda on the internet. I play it and listen every time I do one for a good chuckle
@termonostruman
@termonostruman Месяц назад
Garbage hondas
@josephshultz6726
@josephshultz6726 Год назад
Great video man. Really enjoyable and informative. Wish I had your experience. I have an 01 accord with an F23a1 that has 280k miles and could use some attention to the leaking rear main seal and some likely leaks on the front side of the motor that are cost prohibitive to have a garage repair them. Nonetheless, videos such as yours help further the understanding of those that have no background in auto repair and a great place to learn.
@williamtozer
@williamtozer Месяц назад
Can't thank you enough for this video. I just finsished changing the timing belt and water pump on a 2000 Accord. It took me a long time as I had back track a few missed steps, misplaced a bolt or two and stripped one of the water pump bolts. Not sure I would have gotten it done without this video and some other helpful ones I found. As for the repair of the M6-1 bolt, I was able to use a helicoil kit. It took me the better part of a day just for this repair since there was very little space to work in.
@ЭтотГайДин
@ЭтотГайДин 2 года назад
This guy is a instructor 🤘🏼
@williegeorges1733
@williegeorges1733 3 месяца назад
Getting ready to head outside and get start had to come freshen up great video for diy people thank you for saving us money
@nancyfromkingbolen2428
@nancyfromkingbolen2428 2 года назад
Every Angle of the video is very reasonable, step by step, easy to understand!
@RustBeltAuto
@RustBeltAuto 2 года назад
😁
@nancyfromkingbolen2428
@nancyfromkingbolen2428 2 года назад
@@RustBeltAuto Do you need an auto scanner for your work?
@RustBeltAuto
@RustBeltAuto 2 года назад
@@nancyfromkingbolen2428 auto technicians do.
@tomgavin4908
@tomgavin4908 6 месяцев назад
This is one of the best instructional videos! I did this job in half the time with this video. Thank you!!!
@tobycambron9443
@tobycambron9443 Год назад
What an excellent, concise demonstration. I am subscribing to your channel and you are now the first one I will consult as I work on my own cars. Thank you
@dennisrobinson8008
@dennisrobinson8008 Год назад
Very good demo. Your patience and comedy make it seem easy.
@nealmont
@nealmont 2 года назад
Since I got a weighted socket which I was skeptical about, I haven't had to use the special tool to loosen the crank pulley bolt. Great video.
@brandonlee8400
@brandonlee8400 2 года назад
Excellent tip. Never heard of this before, looks much easier.
@iamasmurf1122
@iamasmurf1122 Год назад
@@brandonlee8400you need a air compressor gun with the socket , it’s simple with a decent air compressor and gun ; the socket you buy is a special socket especially designed for the Honda
@frankamellin5577
@frankamellin5577 2 года назад
Your method of explaining procedures is very concise, complete and easily understandable. Have you ever considered teaching?
@RustBeltAuto
@RustBeltAuto 2 года назад
I just did.
@frankamellin5577
@frankamellin5577 2 года назад
I was referring to a more structured environment, like a trade school. Young people are really in need of mentors they can relate to.
@RustBeltAuto
@RustBeltAuto 2 года назад
@@frankamellin5577 school is for tools. It is time, and money waisted. Most of everything you will need to know is in the field. A lot of people don't have what it takes. A certain mindset is crucial. School will take your money, whether you have the aptitude, or not. A good mentor will know if you need to be doing something else.
@brandonlee8400
@brandonlee8400 2 года назад
@@RustBeltAuto 😂😂😂😂
@johnlivingston9217
@johnlivingston9217 Год назад
Good car, well built, great home mechanic, keep it running for 1/2 million miles and then more. Thanks for the vid.
@tx4runner459
@tx4runner459 2 года назад
Had one, she leaked from the valve cover, needed a VTEC solenoid and crank sensor… ran from 90k to 174k before I sold it, no issues at all after fixing them issues. Great first car
@michaelallen5505
@michaelallen5505 Год назад
Great video. I'll be doing this on my sons car soon. You're right about the pitted metal under the water pump can leak. I've also rubbed some sealant on the pitted metal face that a gasket mounts up to, after it is clean.
@Clearanceman2
@Clearanceman2 Год назад
Thanks for the video. You got me when you said turn counter clockwise and then you turned the crank clockwise
@bryanbarajasBB
@bryanbarajasBB 2 года назад
Yeah, my 2000 Honda accord needs a transmission rebuild and a main engine rear seal replaced👍I have to pick my car up this Monday after a water pump replacement kit, same kit used here, was placed.
@Johnny35130
@Johnny35130 Месяц назад
Great video. Had this ragged accord for 10 years, have torn into this 3 times. There are 2 holes in the balance shaft I didn't get it right with the bolt, thanks for the marks the Mr. Hayney manual didn't show. It ran fine with the balance out but seems to play havoc with the shift points for some reason.
@mediaguy4037
@mediaguy4037 2 года назад
Despite the leaks, that accord looks much better then some of the ones I’ve seen at least engine wise. Even has a factory alternator in it.
@RustBeltAuto
@RustBeltAuto 2 года назад
Seems like a good car.
@kikelira6220
@kikelira6220 Год назад
Gracias por compartir sus conocimientos. Este video fue de gran ayuda para mi y poder reemplazar la bomba del agua. Felicidades y bendiciones.
@asherlol7666
@asherlol7666 Год назад
man i commend u. torque wrench on everything. you’re the man. i’m a full time mechanic & this is crazy to see
@Laurel-Crowned
@Laurel-Crowned 4 месяца назад
😂
@mechanicdave4899
@mechanicdave4899 Год назад
Thank you. You helped with my major concern of belt slack. Shop key pro data isn’t very clear about this. I’m very grateful for your help!
@natecuenca8951
@natecuenca8951 8 месяцев назад
Great video sir, very helpful/informative!! Thanks for your efforts!
@greyes701
@greyes701 2 года назад
I have the Non vtec 2.2l 95 Accord wagon 195,000. I had to send it into the shop for no start issue (no time to sus it out). "That fuel pump was definitely bad, I put power to it. But it still has that hesitation on start up tho."🤷🏻‍♂️ Me: (WTH?🤔) Week later wouldnt start again, poked around for a few days-tune up (needed it), Main relay-nada. Then, paper clipped the odb no flashes on the CEL=DEAD COMPUTER!! Im no mechanic but, I didnt charge myself $450 for a fuel pump I didnt need either!! Maybe with your help timing belt in 25k miles?🤷🏾‍♂️ Car runs like a dream.❤️ Great video, thank you for sharing!!!
@jayosiris8944
@jayosiris8944 5 месяцев назад
You ain’t wrong about the water pump seal. I didn’t use rtv it leaked so I had to do the job over again 😅
@brandonlee8400
@brandonlee8400 2 года назад
Kudos! This is one of the best videos I've ever seen. BTW, what camera are you using and light and mic? Of course, technically you added in all the tips and tricks. Just a really well done how-to. I've only worked on d-blocks so these balance shafts and springs are new to me.
@RustBeltAuto
@RustBeltAuto 2 года назад
Galaxy s10e
@leonardsolis9876
@leonardsolis9876 4 месяца назад
Thank you, tomorrow i have to do my timing belt kit.
@usedtruckemporiumusedtruck4166
Thankyou for the video, you do a thorough job and I like that you sound like homer simpson!
@aaronsnider6099
@aaronsnider6099 2 года назад
This video really did help me with my car thanks man!
@RustBeltAuto
@RustBeltAuto 2 года назад
Sweet
@spelunkerd
@spelunkerd 2 года назад
I just put an identical AISIN kit from RockAuto onto a 2007 Accord. The kit really was excellent, at least as good as the OEM parts on it. To my surprise, the crank bolt was clearly a virgin, despite the fact there were over 200,000 km on the engine. Not a virgin after I was through with it, ha ha. Needed a 3/4 breaker bar with a long cheater pried against an extra jack stand, plus the $20 tool. High mass sockets don't fit into that tool, and a 3/4 air tool was a bust, literally.
@RustBeltAuto
@RustBeltAuto 2 года назад
You must have done a V-6.
@br5747
@br5747 Год назад
Sounds like a sports commentator. So well described that you almost don't need the video.
@mlynch001
@mlynch001 7 месяцев назад
Excellent Video! I am surprised that you did not mention the VTEC Control valve O-Ring seals. These are a known major source of oil leaks. My 99 Accord had the distributor o-ring oil leak along with a serious VTEC Seal leak. Cannot believe that you don't have more views and more subscribers. 5 Star Video!
@jorgleo0078
@jorgleo0078 11 месяцев назад
I learn so much on this video , thanks !
@kamalabbady6778
@kamalabbady6778 2 года назад
Great job, I like the camera angle.
@austinsnider2957
@austinsnider2957 Год назад
Appreciate the video!
@gustavomata2120
@gustavomata2120 7 месяцев назад
This is excellent video , great job , thanks for share
@pirihern9329
@pirihern9329 Год назад
Just found this and subscribed. I'm in the process of doing this on my 98 Honda prelude, then may do my son in laws 2002 Honda accord se with a 2.3 liter engine. He bought it used for $4000 from a acura stealership with 143,000 miles. Cant find any record of the timing belt being done. No bueno. I'm 70 retired lineman diyer.
@pirihern9329
@pirihern9329 Год назад
Oh by the way excellent video on the timing belt change
@RustBeltAuto
@RustBeltAuto Год назад
@@pirihern9329 thanks!
@LA_Commander
@LA_Commander 5 месяцев назад
Great video! I love your accent. You sound like you're from one of the far north states like Minnesota or around there.
@RustBeltAuto
@RustBeltAuto 5 месяцев назад
Ya
@gogocw1
@gogocw1 2 года назад
I love my 01 J20A. Just rebuilt the motor and trans. Hoping for another 200K
@bryanbarajasBB
@bryanbarajasBB 2 года назад
Yeah, my 2000 Honda accord needs a transmission rebuild and a main engine rear seal replaced🙂
@SmooveOperatorr
@SmooveOperatorr 2 года назад
@@bryanbarajasBB how many miles are you at
@bryanbarajasBB
@bryanbarajasBB 2 года назад
@@SmooveOperatorr 257,500🤣
@SmooveOperatorr
@SmooveOperatorr 2 года назад
@@bryanbarajasBB I have some hope then I’m at 146k and trans already slippin
@alpha_cg5
@alpha_cg5 Год назад
J30a you mean?
@itskrill
@itskrill 2 года назад
awesome video man, really enjoyed watching even though I don't have this car 🤣
@denismurillo5424
@denismurillo5424 Год назад
Excelente trabajo viendo videos e aprendido un poco aReglar mi carro me gustaría poder trabajar de ayudante de mecánico para poder aprender mucho más es un trabajo sucio pero vale la pena aprender la mecánica automotriz
@ZacVaper
@ZacVaper 7 месяцев назад
Great video, thanks.
@StuartJueong-dk4dt
@StuartJueong-dk4dt Год назад
One of the beer mech videos I’ve seen
@Jeremiah.1
@Jeremiah.1 10 месяцев назад
Great job!
@ronniecarlisle2873
@ronniecarlisle2873 10 месяцев назад
Great video / thank you
@leeatterberry1239
@leeatterberry1239 Год назад
Nicely done
@ellaweli125
@ellaweli125 2 года назад
I was behind your car in a McDonald’s drive thru and saw your RU-vid sticker lol
@RustBeltAuto
@RustBeltAuto 2 года назад
Fun. It wasn't me though.
@LeoTheNinjaTurtleMan
@LeoTheNinjaTurtleMan Год назад
Dude.. thank you.
@xdriftmasterx8114
@xdriftmasterx8114 Год назад
I have a 92 Honda Accord will this method work for it to it's a 2.2 as well and it looks basically the same as well
@richardbarker4845
@richardbarker4845 6 месяцев назад
I went and looked at that same hose... ohh boy!
@cooldude2245
@cooldude2245 Год назад
Excellent
@timdavidson6150
@timdavidson6150 2 месяца назад
I change the seals every time. Your already there. Just change them. Put clockwise seals in you'll be fine. 😂
@kennethbrogdon5701
@kennethbrogdon5701 Год назад
My heater hose looked JUST like that
@Jeremiah.1
@Jeremiah.1 10 месяцев назад
Your voice sounds like chronist reporter from the sport News
@narwhal9852
@narwhal9852 Год назад
What's that seal for the Distributor mine is leaking. I'm having a hard time finding that o ring
@RustBeltAuto
@RustBeltAuto Год назад
72416 fel-pro?
@termonostruman
@termonostruman Месяц назад
Usaully i put a gasket on the pump, even with the rubbers,, never hada problem with anyone.. all my pumps last a long when it drop water i jsut tight it and works great. if youn dont want to ahve that work just remove the rubber sela and put a normal gasket
@ScottCole-v7v
@ScottCole-v7v Год назад
U did it in a 30 mins my garage wants 7 hours labor lol
@williamblanks8500
@williamblanks8500 3 месяца назад
It took him 6-7 hours.. video editing is a beautiful thing
@rollin3480
@rollin3480 Месяц назад
It took me 2 days🤣🤣
@ddiablolll
@ddiablolll 9 месяцев назад
This is a great video, and the naysayers need to take a seat, sit back down armchair mechanics of youtube! and take some notes, he did this right. -mechanic
@ngocanhnguyen4066
@ngocanhnguyen4066 Год назад
So intuiative video to learn. I have 2002 accord F23A4 with leaking oil in this clip and need the timing belt replaced. Did you find out where the leak come from? I was thinking of replacing all cam, crank, balance shaft seals. Would those seals stop leaking, any guess?
@RustBeltAuto
@RustBeltAuto Год назад
You should be able to see where it is leaking from.
@Lemoncrusher4455
@Lemoncrusher4455 13 дней назад
Is this an non interference motor I have a friend whose harmonic balancer came apart and bent the key way but it doesn’t look to damage anything inside the key way shaft to the gears inside just the harmonic balancer. Just wandering before I tear it the rest of the way apart
@RustBeltAuto
@RustBeltAuto 13 дней назад
@@Lemoncrusher4455 all Honda's are interference.
@Dan-vt1qt
@Dan-vt1qt 2 месяца назад
Wondering that other kits come with 3 oil seals and specially a hidraulic tensioner NTN does the Accord 95 comes with that tensioner??? Thankssss
@RustBeltAuto
@RustBeltAuto 2 месяца назад
@@Dan-vt1qt I think the tensioner is a spring on this car.
@alexthemechanic8110
@alexthemechanic8110 2 года назад
The people that call you an idiot probably dont know that you are a Master engine machinist loll
@mikehall737
@mikehall737 Год назад
Ain't the engine damaged if thr timing belt broke like the valves and pistons ?
@RustBeltAuto
@RustBeltAuto Год назад
If you are not lucky, they hit.
@ngocanhnguyen4066
@ngocanhnguyen4066 Год назад
I think that this model is non-interference engine
@mobilemike8500
@mobilemike8500 Год назад
All Honda engines are interference engines
@screwdajuice
@screwdajuice 2 года назад
Yo, great video as per usual! The audio quality seems a bit worse though. Just my opinion.
@RustBeltAuto
@RustBeltAuto 2 года назад
Ya. I'm wondering as to how I like that microphone. It is a little less annoying to use than the one on the camera.
@awaara24
@awaara24 2 года назад
@@RustBeltAuto this sounded like an after recorded voice over, also you weren't as animated as you usually are....is that for only while working on non-Japanese makes?
@RustBeltAuto
@RustBeltAuto 2 года назад
@@awaara24 I was using a wireless headset. Don't understand the animation thing.
@brandonlee8400
@brandonlee8400 2 года назад
@@RustBeltAuto Oh, was it a Rode? I seen a lot of other youtubers use those. I thought the audio was good because it was a headset instead of a camera or phone trying to pick it up with different levels per distance from the mic.
@RustBeltAuto
@RustBeltAuto 2 года назад
@@brandonlee8400 Razor.
@danielnino3861
@danielnino3861 Месяц назад
What is the name of the pulley, (timestamp : 12:49) the one the left of your left hand ? Doesn’t the seal on that one comes off and then it leaks there? I have that issue with my 2000 accord 2.3
@RustBeltAuto
@RustBeltAuto Месяц назад
@@danielnino3861 think it is a balance shaft. They can leak.
@Jeremiah.1
@Jeremiah.1 10 месяцев назад
This also applies to honda crv 1999 just asking I have one job to do next time soon
@rocalamole
@rocalamole 2 года назад
An outstanding tutorial video. I have a 99 Accord & removed harmonic balancer including keyway, now I can’t get keyway to get in all the way. What would you suggest?
@RustBeltAuto
@RustBeltAuto 2 года назад
Try harder?
@rocalamole
@rocalamole 2 года назад
@@RustBeltAuto I’ve tried, I put a light & gap is not deep, key goes in about 1/2 only.
@RustBeltAuto
@RustBeltAuto 2 года назад
@@rocalamole umm... isn't the other half for the balancer?
@rocalamole
@rocalamole Год назад
Thank you so much. Finally I got everything fixed. But when I turn car on the engine makes a clicking noise
@momof5girls1
@momof5girls1 8 месяцев назад
Are these motors an interference motor , because my timing belt broke will I likely have a bent valve or something?
@RustBeltAuto
@RustBeltAuto 8 месяцев назад
My sources say yes.
@superpigify
@superpigify 27 дней назад
Do you happen to know the size of the bolt you installed in the tensioner arm at 15:35 & did the bolt have a washer on it?
@RustBeltAuto
@RustBeltAuto 27 дней назад
@@superpigify as a guess, i would say 6x1.0mm. A water pump bolt should be the same thread.
@samuelrodriguez247
@samuelrodriguez247 9 месяцев назад
What does a job like that cost? I have a 96 Accord ex that stopped running. It has 257k miles and timing belt was last replaced at 180k. It's there a quick way to check if the timing belt is the issue? Thanks
@RustBeltAuto
@RustBeltAuto 9 месяцев назад
Remove valve cover, timing cover, and check it. A lot of times the problem is a bad distributor too.
@urijahlucero9669
@urijahlucero9669 11 месяцев назад
do you know where i can find the rubber part that goes around that adjust bolt? Mine doesn’t have one and my serpentine belt is rubbing against the cover cause it isn’t staying stationary without that part. Thank you for the video it was extremely helpful
@RustBeltAuto
@RustBeltAuto 11 месяцев назад
I do not. Might need to get creative, or call the dealer.
@urijahlucero9669
@urijahlucero9669 11 месяцев назад
@@RustBeltAuto okay thank you i appreciate it
@Clearanceman2
@Clearanceman2 Год назад
If I turn the crank to the left, which is counter clockwise by the way, it pops as it comes over the cam pulley. That's why I think I'm going backward.
@RustBeltAuto
@RustBeltAuto Год назад
It's probably too loose. Did it jump a tooth?
@jefferycatoecatoe7455
@jefferycatoecatoe7455 7 месяцев назад
What is the five older only scrap closing wires
@RustBeltAuto
@RustBeltAuto 7 месяцев назад
I don't uderstand
@The0fficial.i
@The0fficial.i 3 месяца назад
Did you have a skip from bent valves ? I know this is an interference engine
@RustBeltAuto
@RustBeltAuto 3 месяца назад
This car didn't bend any valves. The belt did not break.
@bobbywren123
@bobbywren123 7 месяцев назад
Zip Ties work to hold that plastic up
@toniortiz819
@toniortiz819 6 месяцев назад
Will the 2002 Honda Accord bend the valves when the timing belt breaks?
@RustBeltAuto
@RustBeltAuto 6 месяцев назад
Sometimes.
@toniortiz819
@toniortiz819 6 месяцев назад
@@RustBeltAuto is there a way to tell
@RustBeltAuto
@RustBeltAuto 6 месяцев назад
@@toniortiz819 you can do a leakdown test, and be careful not bending valves when you do it. Most people toss a belt on, and see what happens.
@toniortiz819
@toniortiz819 6 месяцев назад
@@RustBeltAuto ok great thank u sir your very knowledgeable!!
@nvo_gabriel2107
@nvo_gabriel2107 Год назад
I’m just wondering if the F22B2 engines are included with the same sizing? I just don’t know if the non-Vtec and Vtecs of the years stated have the same size belts
@RustBeltAuto
@RustBeltAuto Год назад
F22b2 and f22a1 are same.
@laurenbyers6686
@laurenbyers6686 7 месяцев назад
What do you use to clean out inside of timing cover and gears mine are completely covered in sludge
@RustBeltAuto
@RustBeltAuto 7 месяцев назад
You must have an oil leak. Brake cleaner, or even soapy water
@meblake7359
@meblake7359 Год назад
I have to replace the timing chain and balance shaft chain on a 05 CRV. Do you have any tips for timing the balance shaft properly?
@RustBeltAuto
@RustBeltAuto Год назад
I do not. There are many videos, and information on k24, and k20 engines.
@richardhicks4746
@richardhicks4746 Год назад
I have a question or two do you cut the pointer off the bottom cover for the harmonic balance or because you seem to slip that cover right in there with no problem where mine was nearly breaking the cover to get it in. Second question did everything correct? Everything’s lined up perfectly balance shafts are perfect but I’m still getting a winding sound and some type of noise seems like it’s coming Through the valve cover like some sort of groaning sound. Could my belt be too tight.
@RustBeltAuto
@RustBeltAuto Год назад
I have no answers, and did what I did.
@jjcross3560
@jjcross3560 2 года назад
How much should I pay to have it done by qualified Mechanic?
@RustBeltAuto
@RustBeltAuto 2 года назад
I don't know.
@weightoven
@weightoven Год назад
@@internetconnection9290 wrong answer
@CeeGee5849
@CeeGee5849 Год назад
When changing the water pump do have to change timing belt?
@RustBeltAuto
@RustBeltAuto Год назад
You probably should.
@jmatzramoj7413
@jmatzramoj7413 3 месяца назад
belt size
@geraldcollins7103
@geraldcollins7103 Год назад
So how did it take you. Start to finish?
@RustBeltAuto
@RustBeltAuto Год назад
Don't know.
@johnferrari3984
@johnferrari3984 Год назад
Hi can you please tell me if I will be able to usually loosen the crank bolt with a breaker bar? Thank you for your video.
@RustBeltAuto
@RustBeltAuto Год назад
Maybe.
@johnferrari3984
@johnferrari3984 Год назад
@@RustBeltAuto Is it 100% necessary to take off the valve cover in order to remove the top timing belt cover? Thank you for your kind response.
@RustBeltAuto
@RustBeltAuto Год назад
@John Ferrari some people cheat, loosten the bolts, and lift it up enough to sneak it out, but it might leak if you do.
@johnferrari3984
@johnferrari3984 Год назад
@@RustBeltAuto Could you please confirm do I need to take out the engine mount in order to remove the upper and lower timing covers. I just want to inspect for any leaks. before I remove the timing belt. Can I remove the balance shaft belt and replace the balance shaft gear assembly gasket with out removing the motor mount. Thank you for your kind responses!!!!
@RustBeltAuto
@RustBeltAuto Год назад
@@johnferrari3984 I don't want to have any answers for that.
@timcarter9146
@timcarter9146 Год назад
Idk how your slipped on so easy I can’t get mine on without prying it on
@RustBeltAuto
@RustBeltAuto Год назад
Something on your kit may be a little different, or you didn't put the tensioner on right.
@ThatGuyKappa
@ThatGuyKappa Год назад
yup imperfect sealing surfaces aka corrosion yup use sealant
@scorpios_rule1615
@scorpios_rule1615 Год назад
where are you located, I have an 2001 accord,2.3.with 387,000 miles on it needs timing belt changed for the 3rd time, is it true if that belt breaks while driving, it will tear up the motor?
@RustBeltAuto
@RustBeltAuto Год назад
Ya. It's true, and I live in outer space.
@scorpios_rule1615
@scorpios_rule1615 Год назад
@@RustBeltAuto i think my honda can make it there:)
@danalowe1702
@danalowe1702 Год назад
What happens it your off on timing or value mark's and you try to start it.
@danalowe1702
@danalowe1702 Год назад
Will it damage the engine. I'm looking at 1 the guy said he changed the belt and water pump but it won't start and thinks the timing or value mark's are off.
@RustBeltAuto
@RustBeltAuto Год назад
@@danalowe1702 it can potentially bend valves and stuff. It is an interference engine.
@minecraftmaster6582
@minecraftmaster6582 9 месяцев назад
Hey the small belt how do you call it mine is rip
@RustBeltAuto
@RustBeltAuto 9 месяцев назад
Balance shaft belt?
@minecraftmaster6582
@minecraftmaster6582 9 месяцев назад
@RustBeltAuto the one affect on something for driving?
@RustBeltAuto
@RustBeltAuto 9 месяцев назад
@@minecraftmaster6582 balancing. Like anti shake.
@minecraftmaster6582
@minecraftmaster6582 9 месяцев назад
@RustBeltAuto so that means is not going to run right another question you know the pin lock for the upper pully can buy the one on autozone or any auto part just the pin
@termonostruman
@termonostruman Месяц назад
honda engineers should put the engine supports in other place
@jmatzramoj7413
@jmatzramoj7413 3 месяца назад
belt size????
@RustBeltAuto
@RustBeltAuto 3 месяца назад
That is a question your parts store can easily answer.
@dawarrior331
@dawarrior331 Год назад
did you have to use retainer seal on counter shaft
@RustBeltAuto
@RustBeltAuto Год назад
Whatchumean?
@dawarrior331
@dawarrior331 Год назад
On the balancer shaft at top the seal would pop out so they put like a half moon retainer to prevent the seal from popping out and leaking
@RustBeltAuto
@RustBeltAuto Год назад
@ATM if there is one there, you should probably use it.
@dawarrior331
@dawarrior331 Год назад
It was something they made after years because it would pop out @@RustBeltAuto
@RustBeltAuto
@RustBeltAuto Год назад
@ATM machinists, and technicians also use #2 permatex, when they believe they might have a problem with that.
@bradleycharles1947
@bradleycharles1947 2 года назад
Is he trying to sound like peter griffin?
@RustBeltAuto
@RustBeltAuto 2 года назад
It's just me. 😛
@shawangunk
@shawangunk 2 года назад
Yo yo bro
@RustBeltAuto
@RustBeltAuto 2 года назад
Yo
@matt7iron
@matt7iron 2 года назад
Where are you located, i have the same Yr 2000 4cyl accord, you in California.
@RustBeltAuto
@RustBeltAuto 2 года назад
No
@brandonlee8400
@brandonlee8400 2 года назад
@@RustBeltAuto the rust belt of Cali🤣
@geomatiq
@geomatiq 2 года назад
How much money these jobs be going by?
@RustBeltAuto
@RustBeltAuto 2 года назад
I don't know. It's different for everyone.
@kory4896
@kory4896 Год назад
crank sensor position honda accord 2002
@iqbal-k7c
@iqbal-k7c Год назад
Thanks
@ng1503
@ng1503 2 месяца назад
Sounds like jesse ventura
@RustBeltAuto
@RustBeltAuto 2 месяца назад
@@ng1503 That's my governor. 😁
@willywonka8376
@willywonka8376 Год назад
where are you located? ;]
@RustBeltAuto
@RustBeltAuto Год назад
Outer space.
@GG4elite7942
@GG4elite7942 10 месяцев назад
Coolant is supposed to be blue
@RustBeltAuto
@RustBeltAuto 10 месяцев назад
What's in it?
Далее
Honda Head Gasket 6: Setting the Timing Belts
26:43
Просмотров 44 тыс.
Honda V6 Timing Belt Replacement MADE EASY
8:12
Просмотров 1,7 млн
Blue vs Green Emoji Eating Challenge
00:33
Просмотров 7 млн
como sincronizar un honda accord
9:31
Просмотров 1,3 млн
F23 Honda Accord Replace Timing Belts
7:07
Просмотров 3,5 тыс.
Blue vs Green Emoji Eating Challenge
00:33
Просмотров 7 млн