1998 Chevy K1500 Silverado TRUE DUAL EXHAUST w/ LONG TUBE HEADERS & STRAIGHT PIPES & 10” TIPS! 

Prob didn’t even need to use the lift 😭

“We’ll get y’all a cold start” and continues to rev it nice 👍🏽

Love your enthusiasm man! Can tell you love what you do, and it makes for a successful business. Especially when the customer comes to pick up their truck with a fresh exhaust system, and you are outside hyping them up with the camera rolling! Definitely makes them feel good about their ride!!

Lol he needs to take the cats out for it to be a real clap wagon

What kind of communist puts cats on a vehicle with long tubes

It's always nice driving something like that, because everyone moves out of the way 👍😁

sounds interesting thought those tips would be on a diesel

That trucks rap name is machine gun chevy!

Crossover pipes are X or H pipes around where the transmissions sit center just a FYI

Sweet truck definitely only needed 5” tips

Go back to 0:00 and look how close the roof is to the ceiling of the shop

Sorry to say but thats an ugly set up to be honest, nice truck but the tips killed it 🤣

That is a sick ass country truck right there! SWEET!

Cross the pipes to equalize backpressure? Too early in the morning.

man that grill has my attention. That is sweet. Custom I imagine.

That whole truck looks crazy 🤪

If he fixes that grill and fixes the paint that could be an awesome truck.

FYI a X pipe or H pipe equalizes reversion waves! The ID of pipes must be connected not just ran past each other🤦‍♂️

Not a fan of how the collectors are welded straight to the exhaust with no flange but other than that looks good

Wondering whats so funny about this truck. Its got a straight axle up front. Nice swap.

Streight piped? I see cats,. Why would anyone want such an UNTUNED exhaust,? crushed bends,different length pipes, then those GOOFY CARTOON TIPS , 5'' /6'' TIPS ON TINY 2 1/2'' PIPE,. YOUR TRUCK ,SO DO AS YOU WANT , I JUST DONT UNDERSTAND IT, IS IT HELPING ANYTHING??

I just don’t understand the $200 in tips to be stuffed under the truck almost hidden. See it a lot in my area. Tips are supposed to be seen lol

Hell with bringing it in on a trailer I drove my squarebody chevy with open headers 20 minutes to the exhaust shop 😂

I have the same year model. That sounds crazy.

That’s a crazy looking truck but I really like it

He'll be back to change those tips 😁🤣😂 sounds mean tho 👀

Nice truck man I have a 93

Shoulda ran 2.5" to the start of the bed, then switch to 3" the rest of the way and bend to 90s behind tires no tips either. It will sound like no other, trust me try it.

Was nice till got to the ten in tips !

Those tips are a no for me lmao

Axles from 98 dodge 2500 dana 80 rear dana 60 front.

Yoooo. That thing is HUGE!

Love the truck keep up the great work

Homie said avalanche is next 😂😂

love ur vids

I’m a Chevy guy but I absolutely hate that body style for this exact reason they are always clapped out and the owners do the dumbest mods ever to them

Not a fan of the tips myself but it sounds nasty. I don't get why the trucks getting hate. Respect a mans build lol

did you catch the rona? who else thinks he sounds sick???

18yr old me would have loved that exhaust, hate it now lol

"crossed them to equalize backpressure" LMFAO

I bet that thing is gonna be a mud truck

I have true Dual set up: Patriot Long Tubes to aftermarket cats to super 44s dumped 3in before rear axle and tucked all between body and frame. I don't need a cross over and the power is there throughout the rpm band with 2.25in coming from the 2in collector off the long tubes and mufflers are spaced 14ft from collector for best exhaust scavenging. It sounds good, but pretty sure customer is going for loud and raspy. Why did you guys weld the long tubes to the pipe. I can can take off my whole exhaust with ease as its just one long piece and can run just Long Tubes if I chose to. You guys could of probably done side exit exhausts on both sides before rear tires which is a setup I was actually trying to go for, but ended up just getting the dumps. Sounds good for rolling tall and loud, functionality have to question. And 10in tips are for Diesels for pete sakes.

I wanna put long tubes on my 02 Suburban but don't wanna go through the hassle of possible broken manifold bolts.

Looks like a steers sack... 😂 Sounds like it too.

Ugly truck matches the exhaust

I'm putting long tube headers high flow cats x pipe and a super 10 on it with 3 inch piping Do you guys think it'll sound good? It's a 97 with the 5.7 vortec

Holy shit them tips

Dude it don’t clap, I found my exhaust

Just put long tube headers on my 98 z71 but my oil filter is in the way. Did you have to buy an adapter or was your filter already facing that way.

have you ever done a exhaust on a 6.0 powerstroke?

Damn was this truck touching the ceiling when it was on the lift?!!!

Question... You Always Cross them to Equalize pressure..?? I didn't know this. .

What brand cats are those, part # if available? Trying do that set up on 98 two door tahoe with 5.7 v8

How did yall marry up the 2.5" pipe to the inlet of the 10" tips? I'm thinking the tips inlet was atleats 5" no?

I had a question about long tube headers for a 1998 4x4 5.7 vortec I got hooker headers but everything I see people say they had problems what did you run into

What long tube headers fit the 96-98 K1500 with the 5.7 350? I need a set! Lol

Put them 10in tips on my 454

Im really diggin the front solid axle im just not a big ifs guy. Ifs has there place it just seems like theres so many more moving parts that wear out but its all just a matter of opinion i guess anyway i like the truck

Massive tips

How long is the 10 inch tips and inlet size

Any info on the lift he did ?

My immigrant dad watched this : Now, he's the general of the US Marine Corps

Why weld the piping to the headers? Should’ve put a flange...

Its a no for me. The truck looks horrible first of all, I don't like how it is lifted it, looks deformed. Rip transmission

That's a seriously impressive build. How in fuck's name did they get a dana 60 in the front of a GMT400??

Removed the tips today.grill is for sale if anyone is interested

Brand of headers and cats?

I have a 97 1500 GMC sierra sl reg cab long bed 2wd 5speed. Would that lift work for me???

how did you guys plug in 4 o2 sensors, when theres only 3 on the wiring harness? 2 each header/ ex manifold and 1 after the y pipe

Looks fun..but people do know using chains as recovery...is pretty unsafe and whack

Where can I find that grill

Trucks for sale now in bg ky for 15k

Quiet for long tubes and high flows

What in the hot and crispy, Kentucky fried fuck is up with those massive tips on a gas job?

I disagree with those too 10" tips ! 😕

what lift kit and how high????

Guess the owner wanted to pretend he had a diesel to look cool. Maybe he should have fixed the paint instead of putting two trash cans on the back 🤣

Part # for the long tube headers? Haha and will they fit my 98 chevy tahoe 4x4 2door?

Those rear leaf spring u-bolts are giving me anxiety

No plates on it?

Looks like a 17 year olds squatted truck in the south. The most obnoxiously loud and lifter trucks out there.

Needs a cam

Crossing the pipes effects back pressure? Jesus Christ dude come on

116 DB

backpressure is a myth

I don't know about those tips in the middle

I like more of a rumble that pop is kinda dumb

loud lifted chevy on big tires? thats pretty much always cool, but those exhaust tips lamo. i have seen some dumb exhaust setups but holy hell this has to take 1st place for retarded exhaust tips. if i had this truck the first thing i would do is just take a saw and chop that ugly shit off and just have it chopped behind the cab. besides that that truck is cool.

Wtf? Those tips. Lol

Bro That Grill Is Whicked Where Can I Get That Same Grille For Mine Let Me Know Contact Me Plz

How much is it

is this a 350

When the wheels stick out almost as far as the tow mirrors 🤢🤮

Can you come to 🇦🇹 austria and make this on my Chevy ? Greetings hari👍😃

The tail pipes looks dope af.

Where are yalp located

Damn

back pressure is a myth

Exhaust addicts why is there no x-pipe or h-pipe and you just crossed one pipe over the other curious of why this is

The back pressure stuff is BS. An engine is a giant air pump more exhaust You can get out the better. Crossing that pipe did nothing but cost more pipe