2000 7.3 Powerstroke: Replacing The Front Bearing and Hub

Подписаться 25 тыс.

Просмотров 85 тыс.

50% 1

Replacing the front hub and bearing assembly on 2000 F250. Compatible with a 99-04 Ford Superduty. Also installing Riff Raff's ABS delete plug with the grease fitting.
.
Parts
Timken Wheel Bearing and Hub: amzn.to/2Xv725G
Riff Raff ABS Plug: www.riffraffdiesel.com/front-...
Waterless Wash: amzn.to/2M5GtiT
6637 filter: amzn.to/2EtuhSO
Air filter tube: amzn.to/2VXXtfB
4" Exhaust: amzn.to/2VItdjR
CNC 4 line kit: cncfab.us/i-30497599-cnc-fabr...
CNC Oil Crossover: cncfab.us/i-30497596-cnc-fabr...
CNC Fuel bowl delete block: cncfab.us/i-30497604-cnc-fabr...
Airdog 165: amzn.to/2M41RoY
Fuel Tank Sump: amzn.to/2M7JjnE
Stage 1 Injectors: www.riffraffdiesel.com/allian...
Edge CTS Insight: amzn.to/2ErkHQl
EGT probe: amzn.to/2EsHF9O
Window Mount: amzn.to/2EqiLHO
Pressure Sensor: amzn.to/2wd472h
Sensor dongle:amzn.to/2WoEees
Hydra Chip: amzn.to/2M5CNO7
17+ Tow Mirrors: amzn.to/2VJqvKT
Rigid Fog Lights: amzn.to/2M1ar7I
Smoked Tail Lights: amzn.to/2Es7PcS
LED Brake Lights: amzn.to/2YJv21L
LED Reverse Lights: amzn.to/2W3gVrz
Smoked Headlights: amzn.to/30GMKFh
.
.
Music:
Nostalgia by Tobu / 7obu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Nostalgia - Tobu (No C...

Авто/Мото

Опубликовано:

23 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@TheFordGuy78 5 лет назад

Love watching these videos. Plain language and gives a good idea of what a project entails. Also, those new hubs are SHINY

@keithnoneya 4 года назад

Nice Job. The axle play at time index 14:36 is due to the hub not being installed. There are three bearings in the hub assembly. The main large one, not visible, is for the wheel. The two smaller ones support the fwd axle. There is one buried in the back of the hub locker, it supports the tip of the 4wd axle and a smaller a needle bearing n the hub assembly on the axle side that supports the axle on the axle tube side. If you don't have the hub & the locker installed there is nothing to support the axle except the axle seals. That axle tube dust seal is bad so change that one. Best Wishes & Blessings. Keith Noneya

@LivingOnWheels 4 года назад

I appreciate the response! Got it figured out and you’re totally right.

@James-qq1rd 3 года назад

Do you guys have a link or part numbers/kit number for these bearings ??

@keithnoneya 3 года назад

@@James-qq1rd Hey James I don't know if you were asking me or L.O.W. Do this search, "2001 (use your year) ford f350 front hub bearing", for them on Amazon and you'll find the ones need. I would select Timken as they are the best. Don't for get you'll need the seals and the seal install tool. It's expensive at around $80.00 bucks but it will save you seals and you can resale the tool when you're done. I've done this job twice on a friends truck (one wheel each) so trust me buy the tool. Also don't forget to inspect the outer axle shaft bearing surface and the outer bearing in the wheel locker. The bearing in the wheel locker can be changed as well. Hope this helps. Best Wishes & blessings. Keith Noneya

@markjameson7118 3 года назад

@@keithnoneya Could you please send me a link to the seal install tool that you are talking about? I have a 2000 F350 with the 7.3, got some noise from the left front wheel, need to replace the hubs next. Tried tires, still have the noise, next is the hubs/bearings. Thanks in advance!

@keithnoneya 3 года назад

@@markjameson7118 Here you go bud. www.amazon.com/s?k=Bestong+Axle+Shaft+Vacuum+Oil+Seal+Installer+Tool&ref=nb_sb_noss Just do this search and it should pop up. "Bestong Axle Shaft Vacuum Oil Seal Installer Tool" Best Wishes & Blessings. Keith Noneya

@tylerdunn6578 4 года назад

Man that grease fitting in place of abs is so cool I like that. I always wanted a fitting in the hubs thanks to you I will do that eventually.

@LivingOnWheels 4 года назад

RiffRaff makes some awesome products!

@shoppingcartmafia1482 3 года назад

Yeah man that’s cool as hell

@velocityturbosuzuki 5 лет назад

Just came across your channel and love the 7.3 content as I'm on my second one. A 2001 f250 7.3 4x4. I need to get all this done to mine also. Great job on the videos young man and you getting things done. You should be able to no problem get 4-5 hundred thousand miles out of that 7.3.

@LivingOnWheels 5 лет назад

Welcome to the channel and I appreciate that! I try to take care of the old girl the best I can! Maybe have some extra fun here and there haha.

@jeff.3.2.12 5 лет назад

Great video! When I bought my truck a few years ago the owner before me replaced the locking hubs with Warn, they forgot the snap ring on the stub shaft which chewed up the shafts. So I replaced everything from the u-joint outwards. Everything is still running good and I have 19.5's for tire/wheel combo.

@LivingOnWheels 5 лет назад

Thats a costly mistake. At least now you know its all fresh and good in there!

@fireteamtoo 5 лет назад

Did the same job on my 7.3 about 2 years ago. Ended up replacing the vacuum seal (big seal in the spinal) and the seal in the axle right after the ujoint and it tightened the axle right up. No play in it after. I’m pretty sure there was a thrust washer between the wheel bearing and vacuum seal

@justinoneal3028 2 года назад

Incredible video to learn how to fix it yourself, even more Incredible is this man in a wheelchair doing things 90% of regular people can't! Literally never followed anyone but this man will be the 1st! Thank you

@LivingOnWheels 2 года назад

I appreciate it!

@michaeltirey8642 Год назад

Thanks for letting us know about that grease fitting, I have abs but it would be worth disconnecting them and installing the fitting, grease the hub then reinstall the abs. And by the way man I think your awesome for doing these videos and not letting your handicap be a handicap, cudos to you.

@shoppingcartmafia1482 3 года назад

Man great video! About to do the same on my farm truck

@NoHalfAss 5 лет назад

Living On Wheels almost to 1k subs bro!!🔥💯🔥💯 keep it up💪🏻

@d4t4wx 2 года назад

Awesome video young sir. Thanks for posting.

@gaggopaul13 Год назад

I have a 02 f350 and a few weeks ago on a road trip my breaks seized up and started to smoke because my hub assembly and had to replace rotor and hub and bearing $100 for the tow $600 for the fix smh now the other side is going bad but I’m gonna try doing it myself thanks to your video. Your awesome thanks for the videos you post there really helpful

@LivingOnWheels Год назад

I’ve been in that situation before. Not very fun. I’d totally recommend doing it yourself. It’s not hard. Also, I will say that the Timken bearings aren’t cheap but they are still going strong on the truck today.

@josephcirelli9642 5 лет назад

Thanks again for all you do making your videos! Another great informative content video! Doing your work yourself ensures that the job was done correctly. Being able to grease your hubs is definitely a great way to ensure the hubs last a long time.

@terrycarter8929 3 года назад

FYI if you are replacing the pads you can put your pry bar or a screw driver in the access hole in the caliper and pry the caliper over to depress the piston in and you will not have to fight very much to get it off.

@iainf6 5 лет назад

Nearly a 1000 buddy!!!!!

@scootertrash647 3 года назад

Ive never seen a grease fitting adapter for those hubs. Mind blown. Ordering some asap

@LivingOnWheels 3 года назад

Even better is theyre American made!

@ericwojcieszak9617 3 года назад

Thanks for your videos brother much love out of s fla

@Zach4046792 2 года назад

Ive got a 2000 F250 4X4 7.3. I'm just now doing these replacements on my truck. 312k miles.

@haljordan7806 4 года назад

Thanks for the video man. Liked and subbed to view more as I am a DIY'r as well

@tracyburden6699 2 года назад

Great detailed video.

@erikcreasey4376 4 года назад

I find that most caliper bracket bolts have thread locker on them so i always heat them up until they smoke and they always break free

@chadlambert3186 2 года назад

Thanks for sharing I got the same problem

@countryboy73005 4 года назад

Thanks for the video

@bobbyilluminati 3 года назад

Great Video. Thank you!

@tuber93422 3 года назад

I appreciate iate your content !

@Debtfreehomesteaders 3 года назад

Great video. Getting ready to rebuild/replace mine on the front of a 2000 F250 Superduty 7.3 with auto hubs. Its leaking from somewhere? Thanks for the great content. -Will

@bipolarflatbedder6622 3 года назад

I'm just going to to put this here save yourself the headache especially if you're running bigger tires get the dynatrac free spin kit and get rid of the weak assemblies these trucks come with.. I did it to my 02 and it was absolutely worth the money to have manual hubs again

@keithwilliam6209 Год назад

You called it . A trust washer is what’s needed 🙈 I didn’t do it the first round and now I’m doin the bearings again spicer part 47766 goes behind the bearing

@salvatoreroj2914 3 года назад

holla soy mexicano mis respetos para ti compa aunque no hablo ingles entendi perfectamente tu video saludos

@LivingOnWheels 3 года назад

Muchas gracias. No hablo español, así que espero que el traductor de Google no sea tan malo.

@rcfundyer5739 2 года назад

great vid you did a good job 1 new sub for you

@Joshua-yn1zx 4 года назад

Your A Bad Ass! Keep posting videos. #99 7.3

@LivingOnWheels 4 года назад

Much appreciated man! Just trying to do what I love!

@ML-or2be 2 года назад

So glad you've done the leg work on changing the hubs... I'm waiting on my hubs to come in so I can get them changed out... I also ordered hubs with ABS, and heading to riff Raff to get the delete plug you installed in your... Do you get anything back if someone orders a Riff Raff ABS delete plug you mentioned?

@LivingOnWheels 2 года назад

I don’t get anything from riff raff. I just support them as a quality American company.

@johntheriault6658 Месяц назад

That much play is okay with the bearing out , but the u joint on axel could be bad . But I think you’re good …

@pokey4200 3 года назад

I am currently replacing my axle shaft u joints, but that play you noticed in your shafts is the noise ive been chasing on my f 250...hoping this solves it.

@PoBoyRascal Год назад

Well did it? I have mine apart and it has tons of play

@jamesgazdag876 5 лет назад

That riff raff thing is sweet but can u just delete the abs off ur truck hows that all wrok

@frickinchickens5915 2 года назад

hey there! great vid, I'm just curious about how they've held up the past 2 years

@LivingOnWheels 2 года назад

So far no hint of a single issue.

@Arbiter3319 3 года назад

That my friend would be ur dust seals and vaccum seals mine had that problem i just fixed it

@alfaromeo6985 2 года назад

Hi, my truck is 2000 2WD, does it use the same parts shown in your video? I don't know if mine has ABS on all four wheels. How do I tell? It has 160K and most likely has not had the hub replaced. Do you recommend replacing the hub and bearing? or is it ok with just replacing the rotor and pads? Thanks for your advice.

@LivingOnWheels 2 года назад

No a 2wd is a different setup. You’ll see wires going to a sensor if you have abs. As for replacing. You only really need to replace any if it if it is worn out.

@seamorebutts557 2 года назад

With the addition of the grease fittings, how much grease, and how often you reckon is good for maintenance on the hubs? Thanks!

@LivingOnWheels 2 года назад

That is something I’ve never found a solid answer for. Person I think like any other grease fitting, just a little bit every oil change.

@natej.w.5944 Год назад

what if i dont have an axle in the front the trucks rwd v10 just has bearings in the front

@cliffordhudson8406 3 месяца назад

The roller pins in the hub assembly will support your spined shaft when reassembled

@johnyisfunny1 2 года назад

Any chance of doing a video regarding the oil gasket replacement. I have a 2002 f250 turbo diesel 7.3 it has a bad oil gasket and it's a bitch have not done that one yet, it would be easy if it wasn't for that bar underneath

@LivingOnWheels 2 года назад

Are you talking about the oil pan gasket?

@xxxmikeyjock 3 года назад

the axle shaft is supposed to be loose like that after you took all the bearings that locate it to the work bench....

@dunnoyolo2238 2 года назад

Are your front Hubs Air Actuated ? Im having my WARN manual passenger side Hub not engage.

@LivingOnWheels 2 года назад

No. Mine were manual. If you have a manual hub not locking into place then you probably need to call warm to warranty it.

@PipeDaddyHugeHefner Год назад

So did the play in the axle end up being a problem?

@LivingOnWheels Год назад

Nope. Just a learning experience. Only had that much play because the hub bearing was off.

@silntklr 4 года назад

Did you plug your 4x4 vacuum line?

@LivingOnWheels 4 года назад

Mine are plugged from the factory because the truck was optioned with manual hubs and shift lever

@speedyReedyEnterprise 3 года назад

How did you get the silver hub cover to come off, I have a 2000 f250 and trying to get rotor off but it won’t budge. Do i have to remove hub cover off first ?

@LivingOnWheels 3 года назад

The plastic hub cap pops off and the locker itself has a big snap ring. They can get a little stuck sometimes.

@speedyReedyEnterprise 3 года назад

@@LivingOnWheels thank you! i was able to get them off and changed really appreciate it!

@LivingOnWheels 3 года назад

@@speedyReedyEnterprise Glad to hear it!

@mrtegu 3 года назад

so a year ago ok, but wheres the video replacing the axle bearings or was the amount of play normal bc I dont think it is

@LivingOnWheels 3 года назад

Axle bearing is built into the hub. Which is why it had so much play with the hub off. All was good.

@AlphaBobFloridaOverlord 4 года назад

What is the brand and model number of your snap ring pliers?

@LivingOnWheels 4 года назад

These are the snap ring pliers I was using. amzn.to/2XfsDxY

@tedenderpalmer6550 4 года назад

Your outer axle dust seal is bad, leads to the axle play you found. Dust seal protects the inner oil seal.

@PhilD54 5 лет назад

Are you ever in cold weather with the 7.3? I hear they don’t start too well in cold weather. Do you know how true this is ?

@LivingOnWheels 5 лет назад

Personally I do not currently live in a very cold climate. Coldest it usually gets here is the 20s. Grew up in colorado though where we saw some cold winters. These things do have a reputation for having a tougher time with cold starts but in my opinion this is because most people don't maintain their trucks as well as they should. Keep the glow plug system strong and healthy, run the right oil, use the block heater when needed and these things should start fine in sub zero temps. Take care of your truck and it will take care of you.

@velocityturbosuzuki 5 лет назад

@@LivingOnWheels Yep just take care of the truck and she will start every time no matter the temp

@paulm.6437 4 года назад

Phil D My 94 Ford 7.3 starts hard in near zero weather. Starts better if the engine heater is plugged in. Had to use a 40 amp charger to start it. It shook so hard, I thought it was going to blow up, when it did start! I had 15-40 Rotella oil in it, and probably should have a lower viscosity oil, because of the extreme cold in Prince George, during the Winter months. Zero degrees can change regular weight oil into a thick syrup, at that temperature.

@koreymartinson7238 4 года назад

I have an '02 f350 starts really well down below 0. I run 5w40 synthetic. It is just easier on them to plug in the block heater.

@ndoghouse6853 3 года назад

Use the block heater and keep your electrical and charging system strong. Im in Texas so no real cold but ive had no problem even when I forget to plug the block heater and is freezing.

@ericfroehlich976 2 года назад

What brand hub assemblies are you guys using?

@LivingOnWheels 2 года назад

Timken hubs

@ericfroehlich976 2 года назад

@@LivingOnWheels question..I have an 01 f250. Stock is supposed to be coarse thread but my lug is 14x1.5 which means fine right? What do I order?

@LivingOnWheels 2 года назад

@@ericfroehlich976 I believe you are correct. As far as I am aware the only thing the thread pitch matters with is your lugs nuts. So if you get the wrong one you’d just have to get new lug nuts. If you have fine thread right now then I’d just get the fine threaded in.

@ericfroehlich976 2 года назад

@@LivingOnWheels that's what I figured. I see a lot of guys ask about it and thought maybe it isn't a dumb question lol. Thanks bud

@carolynbateman1320 3 года назад

I came to see how to get the 4 nuts off that hold on the hub. I see, it’s magic!

@carolynbateman1320 3 года назад

Wasn’t sure if I have to turn tires to get at them

@LivingOnWheels 3 года назад

Don’t need to but it helps.

@jetman1963 3 года назад

i see you use WD-40, PB Blaster is a superior product. you should try it

@LivingOnWheels 3 года назад

I use both. Probably just grabbed what was closer haha

@rogerfaulkner417 Год назад

It's your u joints it's sf explanatory.

@rogerfaulkner417 Год назад

Possible seal not seated

@andrewmartin3697 5 лет назад

Send me the abs sensor. I need it

@LivingOnWheels 5 лет назад

That could possibly be arranged!

@andrewmartin3697 5 лет назад

@@LivingOnWheels how can this work. I need this bad too

@stephenembrey883 Год назад

Actually it's a 2000 Ford, they come with either gas engines or power stroke diesel.

@LivingOnWheels Год назад

I am aware.

@brodyvanderplaats618 4 года назад

Man you should invest in a breaker bar

@LivingOnWheels 4 года назад

I did hahaha just didnt have one at this point

@Lane.Bauldree 4 года назад

My truck needs two new front wheel assembly’s

@LivingOnWheels 4 года назад

Well I'll tell you that its really not that bad of a job to do. Except maybe if you're in the rust belt. Then everything is more of a pain haha but doable.

@Lane.Bauldree 4 года назад

Living On Wheels I just don’t have much experience with front end work not my strongpoint

@LivingOnWheels 4 года назад

I had zero experience replacing hubs until these two on this truck 👍🏻

@tylermcfall7597 4 года назад

Did the hub bearings end up fixing the play too? Iv got the same play in mine and was told it could be something in differential broke.

@LivingOnWheels 4 года назад

Tyler McFall yup. Had so much play just because the hub wasn’t there to support it

@midwest9757 3 года назад

The front axle play at the end of the video is 100% normal

@LivingOnWheels 3 года назад

Yup. That’s what I’ve found out. Appreciate the input!

@midwest9757 3 года назад

@@LivingOnWheels for sure! Thanks for the video...just needed to remember which way that thrust washer goes back in, apparently its with the non grooved side facing out