No video :(

2000 RM 125 is it too rich? I need your thoughts?

Подписаться 235

50% 1

‪@TepcoCycleRepair‬ ‪@UpAllNight91‬ ‪@ChuckfromTrueTech‬ ‪@2vintage‬ ‪@docwobtv‬ ‪@dirtbiketv1‬ ‪@999lazer‬ ‪@TheMotorcycleMD‬ ‪@LUNDMX‬ ‪@twistedthrottle‬ ‪@The_Bearded_Mechanic‬ ‪@CameronNiemela‬ ‪@CarsonBrown910‬ ‪@slingingearstv‬ ‪@KaplanCycles‬ ‪@StevesSmallEngineSaloon‬ ‪@GuysPlayingWithTools‬ ‪@hpa101‬
Gentlemen, take a listen to this 2000 RM125. The beginning of the video is before I changed the jets.
From 175 main, 50 pilot, to 170 main 48 pilot.
Does the plug look right after jetting? I see coffee color around the electrode but a little clear gas around the threads???
What do you think?

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@mjrybread 2 месяца назад

I asked u if u sold it on another video of yours ha so ignore that 😊,,i just bought one of these,,same year and all the guy put a new piston and clutch in the thang flat rips

@brainstain22 5 месяцев назад

Where is the clip on your needle at? Its definitely too rich.

@Tony2Strokes 5 месяцев назад

3rd (middle) position. It seems to only be rich on low end, so why would that be the needle position?

@brainstain22 5 месяцев назад

@Tony2Strokes try raising the clip (which would drop the needle). The circuits overlap. So changing the needle position would also effect low end. I had the same problem with my 92 RM125 with mikuni tm 35mm. I dropped the needle one clip....now she rips pretty good. Although a smaller main jet is what mine really needs but it worked until I get one. I think yours could benefit from a smaller pilot.

@Tony2Strokes 5 месяцев назад

@@brainstain22 thanks Brian, I actually had it on the second position but put it back to 3 when changing jets. But I think you’re right. I’ll move it back. Thanks again.

@brainstain22 5 месяцев назад

@Tony2Strokes anytime bud....I've been following your build. I just picked up a 2000 rm125 that the top end blew on. Bottom end seems fine. Also just picked up a 2002 RM125 that runs great but the crank bearings are making a slight roaring sound....so I ordered pro x gasket kit and some pro x crank bearings. Wish me luck...lol.

@Tony2Strokes 5 месяцев назад

@@brainstain22 very nice! Good luck. From what I’ve heard, these rm125’s like running lean and go through top ends quickly. I wonder if anyone makes a two ring piston for these 🤔