2007 - 2011 Toyota Camry Radio Install

Подписаться 128 тыс.

Просмотров 147 тыс.

50% 1

Parts used listed in the description below!
Watch a full tutorial as a 2007 Toyota Camry will have a new double din bluetooth radio installed. This radio provides additional features including bluetooth, USB, backup camera compatibility, Apple Carplay / Android Auto and an enhanced sound quality. We will be retaining the factory JBL audio system, and steering wheel volume controls.
This video applies to Toyota Camry models for years 2007, 2008, 2009, 2010, and 2011. This video also includes complete radio wiring and assembly, installation, and testing.
Click here for the front speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the rear speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the 5 channel amp / sub install video:
• 2007 - 2011 Toyota Cam...
Click here for the backup camera install video:
• 2007 - 2011 Toyota Cam...
Click here to see the unboxing of the radio we used:
• Dual CarPlay / Android...
Pioneer bypass video: • How Bypass The Video R...
Alpine bypass video: • How To Bypass Parking ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Dual DCPA701 Double Din Radio: amzn.to/3jzm2cF
*Metra 95-8218S Double Din Dash Kit: amzn.to/34qhvEV
*Crux SWRTY-61J Wiring Harness (Retains JBL): amzn.to/2T1yw2m
--If you don't have the JBL factory system, use the SWRTY-61S harness: amzn.to/3iqHcK7
*(Optional) USB/USB adapter: amzn.to/2URnTA0
*(Optional) RCA to 3.5mm Jack Adapter: amzn.to/3wakBW4
Disclosure: As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

7 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@ProvoBeastAudio 2 года назад

Parts used linked in the description of the video!

@capcom6633 11 месяцев назад

Thanks for the vid! Stereo is in hand and parts ordered off the links you provided. I'll definitely be watching your video again once the wire harness arrives. Thanks again!

@sirbeastly1920 3 месяца назад

I dont even have this radio, i just needed this video to take apart that whole thing, worked perfectly thank you!

@nathang4696 Год назад

Wonderfully done. Good instruction, camera work, narration, etc. Saving me numerous hours.

@julian0310 Год назад

You are great with this videos thanks so much!!!

@ProvoBeastAudio Год назад

You are so welcome!

@CH-sw1bg Год назад

Great video! Made it a lot less intimidating!

@rags-fv6ko 9 месяцев назад

I’m getting ready to do this swap except I have a 2011 manual transmission Camry

@k.ctheking 2 года назад

Right now I have my sub working and my front door and back speakers working it’s just the onley thing Im missing is a new stereo cause my factory I wanna take off but I want my steering wheel and subwoofer and speakers to sound clear and loud

@cleanerhustle9969 4 месяца назад

Helped me uninstall my after market pos Ken wood and put back the stock

@megatonesilva6546 Месяц назад

Great video.......too bad fit & finish is sub-par in regards to the Metra installation kit. Thank you for the excellent video. I will be purchasing an aftermarket 9" Android/CarPlay unit. The Metra kit killed my idea of using my Pioneer AVH head unit.

@ProvoBeastAudio Месяц назад

You're right, it's not the best design, but be careful with Android based units as they have a poor reputation of having terrible longevity and overall quality.

@noel.7691 11 месяцев назад

Great video, where did you put the GPS Antenna?

@wrenchesandcars5161 11 месяцев назад

Did you use any type of antenna adapter for this, I have a 2011 camry and am having a issue

@scottyscarer Год назад

I have a 07 camry where should i attach the amp turn on to the after market harness?

@m4x4400 11 месяцев назад

Did you guys bypass parking brake restriction since you didn't show any hardwiring to the vehicle?

@LeroyMclovin 11 месяцев назад

Could you show how to get that 12v cigarette lighter out of that housing. those tabs are a nightmare and im not trying to break the whole thing. I bought all the stuff in your links so im pretty much doing the same installs

@ZOMBIE_SL4YER 6 месяцев назад

What if you put the amp in the trunk where should you ground an amp

@roymyers2858 Год назад

Is it possible for me to install a dual xnav and just use the factory amp?

@pappascw 10 месяцев назад

Will the Crux SWRTY-61J Wiring Harness work with a JBL system with Factory navigation replacement as well?

@joshiopaz5615 Год назад

Great video!! helped me install my aftermarket stereo in my 2007 Camry w/JBL system. I connected the CRUX adapter. but I realized the Camry had 3 white harnesses but the CRUX only had 2 white harness. My Steering wheel control isn't working but I did connect the 3.5 cable for the sterring wheel control so I'm wondering if that 3rd unconnected harness has anything to do with it. What do you think?

@LeroyMclovin 11 месяцев назад

did you get the crux model for with jbl? I dont have jbl so i got the "s" version and mine came with 3 white connectors. one was just for the rear speakers which im not going to use anyways. not sure what the jbl version of the harnesses look like

@dylanwilliams515 Год назад

Did you reinstall the antenna wires? Can't find a solid source for an adapter

@escobih23 2 месяца назад

so if youre replacing the JBL amp with an aftermarket one, would you connect all the wires together or leave the rears out like you did in this video sir ?

@efrengarciasanchez5700 Год назад

Hi, I have a question. I've been watching your video. to make a change of radio to my car. I have a Toyota like yours and the module I use is different from yours. and mine does not work to answer calls on the wheel. In your car if I work this modular that you put.

@matthewknasel2009 Год назад

What does "retaining JBL" mean? You mention it's needed for steering wheel controls, but is that all it's used for? I'm considering not using it alltogether.

@realdanieldavid 2 месяца назад

I have one question. I’m planning on using a dual port type c dual port for the CarPlay/charging. I’m having a hard time finding the right 12v to 5v usb adapter you used in the video. Do you know where to currently get one? Thanks!

@maahir900 3 месяца назад

So I did this to my Camry but out of no where the screen just went black and no audio was coming out and I was wondering if you could help

@michelleparkerguerrero3977 Месяц назад

Did you have to splice a female adapter onto to the SWC cable from the radio harness adapter? I don't have a female plug for the SWC cable from the Crux wiring harness to plug into.

@derekvandyke9981 3 месяца назад

Does this stereo come with the harness for the JBL or does it have to be purchased separately?

@Kuucs Год назад

Is this compatible with the OEM backup cam

@nxt.g8013 11 месяцев назад

link for the after marketing dash kit?

@assisalexandre2219 Год назад

Hello! My best regards from Brazil! Do you know If the radio of camry 2007 is the same till 2010? I wanna install a bluetooth in my car; in my radio there isn't It! I'm talking about original radio... Thanks a Lot! Sucess to this Channel!

@jamesplayzroblox3143 4 месяца назад

Does this also work on the old aurion?

@ikeliaalexander5723 Год назад

Can this work on toyota solara

@aaronbarkus7436 Год назад

I need help. Can you please respond with my message. How do you make videos play on this deck? I tried everything and it won’t play. It shows up on the screen. I press play, but it still won’t work. Please, I need your help! And thanx in advance

@mflo713 Месяц назад

how did you retain the aux?

@roymyers2858 Год назад

Is this the same process for the hybrid? the ac control is slightly different but the head unit looks identical

@bryanrangel-almanza1435 Год назад

were you able to find out if its the same process for a 2007 toyota camry hybrid???

@codytebeest1596 2 года назад

Hi, I purchased a Pioneer DMH-160BT radio and was wondering if all the products listed in the description would work with it. Vehicle is a 2009 Toyota Camry Hybrid.

@ProvoBeastAudio 2 года назад

Sure will!

@awb4life24 Год назад

Curious how you even got it back on with the factory brackets to the new radio. Having a problem with fitting on mine currently

@ProvoBeastAudio Год назад

if any factory tabs are preventing the radio to sit flush in the bracket, a hammer can be useful..

@makinrahman4534 2 года назад

do you have any problems with the radio itself such as the quality of the touchscreen or anything like that?

@ProvoBeastAudio Год назад

We always recommend a higher brand name radio for longevity and quality - Pioneer, Sony, Alpine, Kenwood etc. Our favorite radio: amzn.to/3z8L9Ju

@gopherman2014 5 месяцев назад

@@ProvoBeastAudiois this one compatible with the car model shown?

@irish89055 4 месяца назад

Goodbye CD player.....

@wrenchesandcars5161 4 месяца назад

Do you use a radio adapter or the factory cable, I have a 2011 Camry and had problems getting the radio to come through

@andywaterman1285 Год назад

Why are my rear speakers not working now?

@jeffdelany2676 Год назад

There was two antenna type wires. One was bluish purple. Do you know where that goes back to or what it is for I was thinking steering wheel controls.

@JoseReyes-ee4km Год назад

Following

@obedleon1602 Год назад

How much cost for a 2011 Toyota camry

@chrstiano2497 2 года назад

Will these parts listed fit for the XLE model Toyotas Camry..I have a 07 with the jbl factory amp and been watching your videos. Just can't decide on bypassing the jbl amp or not. Kind of wanting to retain with factory amp what would you suggest?. Bypass or retain the Jbl amplifier

@ProvoBeastAudio 2 года назад

Yes, and i'd see how it sounds before you bypass it. IF audio quality is terrible, then take the leap to bypass the amp (using our amp install video).

@chrstiano2497 2 года назад

@@ProvoBeastAudio alright sweet man I really appreciate the response 🤝🤟

@pappascw Год назад

@@chrstiano2497 Did you do this yet? I also have an 07 with JBL..

@chrstiano2497 Год назад

@@pappascw yes I just ended up following his videoa step by step man and then sold the Camry a few weeks later lol

@pappascw Год назад

@@chrstiano2497 did it sound ok did you have to bypass JBL system??

@BrianAstovi Год назад

Will this work the same on a 2010 camry hybrid? I want to get a new radio so I can have a backup camera and navigation in the car itself, but I don't want to buy everything to find out its incompatible. My car does also have a JBL sound system.

@ProvoBeastAudio Год назад

Yep it should be the same parts with JBL. Linked in the description

@theowner9715 2 месяца назад

Does this car have the amp under the passenger seat? My ac controls are different too.

@ProvoBeastAudio 2 месяца назад

IF there is an amp under the seat, that indicates you have JBL. No amp means no JBL. See the parts listed in the description based on your year and trim.

@markvngnz_894 Год назад

I can’t find a single touch screen radio with the matching jbl harness. I suck at wiring too

@ProvoBeastAudio Год назад

We can do the wiring for you. Send us a message on Facebook.

@Th3GaMb3r 7 месяцев назад

Why didn't you show us how did you remove the 12v charging power 😭

@hdtube99 2 месяца назад

About jbl switch

@danield1915 Год назад

My 2011 Camry has factory JBL navigation, steering wheel controls, and factory backup camera. I am replacing the entire audio system. I have a question: What is the best way to keep the factory backup camera , steering wheel audio controls, and the factory USB/ 3.5mm?

@pappascw 10 месяцев назад

Did you ever do this? I'm considering doing similar.. Not worried about the backup cam but the rest of it

@gordonweist3711 2 года назад

When I removed the stock deck in my 2010 Hybrid Camry with JBL, there were 5 rectangle connectors and the two round antenna connectors... with the SWRTY-61J, only 2 connectors are now available to reconnect the new deck... what do I do with the remaining vehicle harnesses? and are they necessary?

@ProvoBeastAudio 2 года назад

They won't be used with the Crux, not necessary. Just depends on what options the aftermarket harness adapter is providing you. The Pac version uses 3 or 4, but thats because it is providing more options. You will be fine with the Crux harness.

@orlandoperezacosta6437 Год назад

saludos tengo Toyota Camry 2009 puse radio tatil Android 11 pero no me funciona los votones del volante saludos ayuda por favor gracias

@escobih23 2 месяца назад

Hey sir how did you connect the RCAs to this radio from the amp? I know you didn’t do it in this video but in your other one with the 5 channel amp. I see no RCA slots on it so i’m confused.

@ProvoBeastAudio 2 месяца назад

This radio has RCA outputs. It's on a separate dongle which is how Dual Electronics decided to use them.

@cryotus9070 Год назад

Did you combine the pink wire to the black one? I’m using the crux wiring with out JBL since my car doesn’t have it.

@ProvoBeastAudio Год назад

If the pink wire on your radio is your parking brake wire, then yes you can simply ground it. If it isn't the parking brake wire, we can help more if you let me know what brand radio you are installing.

@cryotus9070 Год назад

@@ProvoBeastAudio Ah thank you. Yeah I just solder the pink wire to the ground and it works fine. Also I was wondering If the steering wheel volume up and volume down buttons can be used with this stereo since the buttons on my, 2009 Camry LE steering wheel, doesn't seem to work with this stereo

@86steelerfan 2 года назад

How are you getting the rear speakers to play if you didn't hook them wires up on the harness?

@ProvoBeastAudio 2 года назад

The factory JBL amplifier only takes in two channels of input, and uses those two channels for all speakers in the vehicle (fader is controlled in the amplifier, not at the radio). That is why you don't connect the rear speakers in our video as the amplifier doesn't use those channels at all to produce audio for the rear speakers in the vehicle. Again, this is only in the case if you have the JBL audio factory system.

@JoseReyes-ee4km Год назад

Sorry I’m missing two parts, do you need to buy a antenna cable adapter or do you connect the old one into the new radio? Also, I quite don’t get the dual usb adapter, one cable goes to the radio but how do you connect the other cable or where?

@ProvoBeastAudio Год назад

No antenna adapter needed, OEM male Antenna plug fits aftermarket radios. Dual USB adapter isn't needed, just use a single one and connect it to the USB on the back of the radio. Dual USB was used where the second USB end was converted to a full-time charge with use of a 12v to 5v adapter. Single USB adapter: amzn.to/3gGHkms

@JoseReyes-ee4km Год назад

Thanks a lot!!

@michaelvella8511 Год назад

I bought one from Losing and it only lasted 3 years

@almalopez1585 8 месяцев назад

I had a new radio installed similar to this one, but it keeps going in and out camera goes off too. Would you know what it might be or why it's doing that??

@ProvoBeastAudio 8 месяцев назад

camera going bad, or a short developing somewhere. One or the other (or maybe both). Check connections.

@MrOntorius 4 месяца назад

the only thing i gotta correct you on ... wire nuts are fine in an automobile, been hooking up radios since the 80s and they are fine. what you said, dont use wire nuts they are not designed for automotive application is absolutely false. only where there will be water or condensation is when they are not safe. they are totally fine on car radios, ive been doing it since the 80s.

@kennedyscheig3233 Год назад

hi i am getting a 2009 toyota camry and want to do the same thing with my car, will it work for mine?

@ayebeegaray1224 Год назад

Yeah most if not all parts for 2007-2011 camrys will fit amongst each other

@olayinkaoyenubi8777 Год назад

Hi. I would love to install same on my '08 Camry Base Model. Can you help with installation? Can you also help program original key with remote as mine didn't come with remote control?

@anbesivam3 6 месяцев назад

My Aurion 2011 has factory AMP as well. After market unit is compatible with AMP?

@ProvoBeastAudio 6 месяцев назад

Yep, just use the right link for JBL retention in the description

@Yourmom69sme Год назад

How do you find what dash kit it need for the specific car?

@BazzyWasHere Год назад

i mean i found mine by just searching "2011 toyota camry android radio" it should have results that pop up that fit it tbh

@kennethmclendon7849 2 года назад

I installed a BOSS head unit in my ‘11 Camry xle with jbl, used the same crux harness but when I set it to BOSS setting my steering wheel controls are all switched up. Volume down button skips track, etc. any suggestions on what this could be?

@ProvoBeastAudio 2 года назад

Try a different dip switch configuration

@jayhawker03 2 года назад

In the past I’ve seen that BOSS radios are really weird with SWC, if you have the opportunity it might be worth returning the radio and getting one from a more reputable brand.

@martinbastida4882 Год назад

We’re u able to figure this out? I got the same problem

@escobih23 3 месяца назад

so even if i’m not keeping the jbl amp i still need to use the jbl version of the harness? i’m confused as to why since i’ll have a different amp

@escobih23 3 месяца назад

@ProvoBeastAudio

@optocane 2 года назад

Can you explain how you installed the double usb to power?

@ProvoBeastAudio 2 года назад

Remove the power socket, put this in its place, connect the USB male ends to the USB inputs of the radio.

@zroth_ Год назад

@@ProvoBeastAudio how do you remove the power socket?

@javiersalas7670 9 месяцев назад

I just had my 07 camry stereo replaced but now get bad reception...what could it be? Any idea?

@ProvoBeastAudio 9 месяцев назад

Need to hook up the amplified antenna circuit to help boost reception. It’s a blue wire on either the radio harness adapter or the antenna harness adapter.

@geovaniwilliams7773 2 года назад

Are you located in the tri state

@ProvoBeastAudio 2 года назад

Utah, actually.

@dandy22ful Год назад

frist of all i would like to thank you for making it so simple i follow your video step by step and it wirks fine i use Crux61J for my camry that had JBL system it works fine but my aftermarket harnes dose not have a blug for steering wheel control it says on the instruction to connect it to SWC1 AND SWC2 which i dont know how to fiend them my after market radio is Sixtop Android 9 inch Car Stereo for Toyota Camry 2008 - 2011+Rear Camera & Microphone so please if you can help me to conect my steering wheel control i "ll greatly appriciate it thank you

@rick252007 Год назад

I need help on this as well. 2011 xle withJBL. I HAVE AN eBay Android radio with built in steering wheel controls and don’t know which wires to tap into. Please help!!🙏🏾

@michelleparkerguerrero3977 Месяц назад

This may be very late but I had the same question. I checked the instructions for the Crux and it says the following: For aftermarket radios that have wires for SWC connections, cut off the 3.5mm plug on the Crux SWC Cable and connect the SWC wires as follows:RED to SWC Key 1, WHITE to SWC Key 2, SHIELD to SWC Ground. Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.

@Th3GaMb3r 2 года назад

Does a 7inch screen stereo double din fit?

@savenification237 2 года назад

how bout 08 camry hybrid ?

@siliconvalleyJT 2 года назад

I also have an 08 camery hybrid will this work in th 08 XLE Model. He never answered you huh

@jayhawker03 2 года назад

Just takes a google search

@roymyers2858 Год назад

Also did this retain the SWC?

@ProvoBeastAudio Год назад

Sure does.

@cookwtf 5 месяцев назад

I wish it wasnt an arm an a leg to get this done to mine 😔

@RashidAliyev Год назад

Can you share link to Crux and JBL module?

@ProvoBeastAudio Год назад

Tons of links in the description of the video.

@RashidAliyev Год назад

Sow it. Sorry.

@mohammadgreen9125 2 месяца назад

I tried to move the fader to rear speakers but the sound fade to off , and I connect the radio through canbus to the factory amp (JBL) is it normal or what ? and did i lost the surround system or it's normal and i just have to put the fader on center only ?

@ProvoBeastAudio 2 месяца назад

the OEM JBL amplifier only takes two channels of input from the factory radio, and the fader is done digitally at the amp, not at the radio. When replacing the radio, you lose the fader option if retaining the factory JBL amplifier.

@mohammadgreen9125 2 месяца назад

@@ProvoBeastAudio Yes that's exactly what's happening , so is it ok or what and did i missed the surround system or it's working and i have to leave the fader on center and everything works fine.

@ProvoBeastAudio 2 месяца назад

@@mohammadgreen9125 Just leave it on center.

@mohammadgreen9125 2 месяца назад

@@ProvoBeastAudio Yes that's what i did , but what I want to know if did i missed the surround feature ? while the new android screen connected to the Amp through the canbus , and thanks alot for your response appreciate it.

@egbunaifeanacho7510 4 месяца назад

How can I contact you. To assist with reinstalling a set for me

@ProvoBeastAudio 4 месяца назад

Send us a message on facebook or instagram. You can also submit an install request on our website.

@kiltahja9792 Год назад

how much does this whole process cost?

@ProvoBeastAudio Год назад

Lots of variables there, depending on the shop, where you purchase equipment, labor, etc. If you buy from amazon, all parts we used are linked in the description. Labor (if done by a stereo shop) will vary place by place, and some shops require you to buy their parts to do the install.