2011-2021 Ford F-150 5.0L Coyote Engine: The Most Common Coolant Leak Repair!

Подписаться 847 тыс.

Просмотров 414 тыс.

50% 1

In this video we show you how to quickly repair the most common coolant leak on the Ford 5.0L Coyote engine.
These are the Tools and Parts I Recommend:
Automotive Pick Set-
amzn.to/3xTRoPW
Ford Genuine Y-Pipe-
amzn.to/3qr4Fgd
Upper Radiator Hose O-Ring-
amzn.to/3w2bINO
New Ford Yellow Coolant (compatible with old OAT coolant):
Concentrated-
amzn.to/3zYpRP1
Prediluted-
amzn.to/3qotf1n
Forscan is a free Ford Specific Diagnostic Software:
Download Here-
forscan.org/home.html
ELM 327 Adapter I Recommend-
amzn.to/2GC6dBj
As an Amazon Associate I earn from qualifying purchases.
My Automotive Repair Shop BSG Automotive-
www.bsgautomotive.com
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Авто/Мото

Опубликовано:

24 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 657

@FordTechMakuloco 3 года назад

These are the Tools and Parts I Recommend: Automotive Pick Set- amzn.to/3xTRoPW Ford Genuine Y-Pipe- amzn.to/3qr4Fgd Upper Radiator Hose O-Ring- amzn.to/3w2bINO New Ford Yellow Coolant (compatible with old OAT coolant): Concentrated- amzn.to/3zYpRP1 Prediluted- amzn.to/3qotf1n Forscan is a free Ford Specific Diagnostic Software: Download Here- forscan.org/home.html ELM 327 Adapter I Recommend- amzn.to/2GC6dBj As an Amazon Associate I earn from qualifying purchases.

@yak_mob1452 3 года назад

When you do water pumps on those coyote engines they always disturb the y connector and o ring on the hose and they leak

@DevinHVACInc 3 года назад

How caN I contact u directly. Having issues with 2015 Ford transit connect 1.6l. No start. Have no crank signal and p0118 for coolant temp. Will still code caused it not to start? After excessive cranking it will logged p0322 for crank sensor

@USA--1776 2 года назад

@FordTechMakuloco can you make a video of how to get a broken dipstick out of the 2012 F150 5.0 seeing as it goes straight into the side of the engine instead of a separate tube

@tylerroberts8992 2 года назад

Will that o ring fit a 5.0 mustang as well? Amazon is saying it won’t

@mrbill9454 2 года назад

@FordTechMakuloco. Do you have a link for the upper and lower radiator hoses? My buddy wants to do all those and the y pipe on his 5.0 and I can't find Motorcraft hoses.

@edwinschwank2446 Год назад

These videos should be purchased by Ford and be mandatory instructional requirements for ALL ford techs. He has great delivery and the nuances of these process are priceless for any do it yourselfers but Ford Techs could learn as well. Great job and keep up the good work...thousands use them to "figure stuff out".....we thank you.

@artrog2 Год назад

I can't thank this guy enough for all the instructional videos. I have built engines and made all kinds of repairs using these tutorials. I know I have saved thousands of dollars repairing my Fords myself, and I know it's done right.

@m.campbell2776 3 года назад

You are one of the top instructors I've ever seen . Haven't even watched this video yet, but I know its going to be fantastic as usual . You've helped me tremendously. Thank You .

@OpaFPV 2 года назад

Another fantastic video! I've been wrenching over 50 years and I watch your videos and learn the vehicle-specific tips and smile at all the little things you do to work smart not hard. For example, use an impact wrench to get the throttle body bolts close and then use a socket to feel the tightness. Nice work! Thank you!

@fwpart3306 3 года назад

Man, you're a phenomenal teacher. Enjoy each of these you make - Thank You

@cjpayne677 2 года назад

Can't help but notice the 5.0 repair playlist has two videos...the Eco Boost playlist has 14...Triton has 74 videos! Happy I got the 5.0, and sold my 5.4 to get it... You have to love it when the known common problems are "Sometimes people don't change the oil enough"

@ericweredyk4142 2 года назад

Watched video 2x and followed the steps you give, and even was brave enough to take throttle body off and cleaned it too. Everything went real great. Thanks for instructions. BTW to others- it took me 2 hours from start to finish.

@rickburt7055 3 года назад

The content of your videos and the information you give are fantastic. It was through one of your videos that you mentioned a recall on the Taurus, Edge etc. for the rear toe link. I called my dealer here in Ontario to find out about it. I gave them the recall # and my service guy said he wasn't aware of it but within a week he called with an appointment for the recall. Thanks, it's all due to your videos that I knew about it.

@brianrobertson1211 3 года назад

One of the many things about Makuloco is you never hear him swear, unlike me when I'm working on any of my vehicles.

@Thundarr995 2 года назад

🤣🤣 yeah, Last summer my neighbor was putting a rebuilt engine in a 97 S10 p/u. I think he invented a few new swear words. At times I think he made cuss word sentences. 🤣🤣

@lancebangwell 2 года назад

That was me today!

@mr.jackson3906 2 года назад

I was thinking the same thing.This guy never gets upset.

@SuperBronco4wd 2 года назад

I had to do this same job on my 2013 f150. Had a friend standing by watching. I was over the rad, arms deep into the hoses spewing all kinds of fowl puke language. Finally got done, looked around, he was gone. Asked him later where he went, he said he left before I start throwing tools. It wasn’t that bad. I think I scared him.

@SuperBronco4wd 2 года назад

@Jenny Melo Did the same, o-rings. Usually the hose is fine.

@Awegner176 2 года назад

This could not have come at a better time. I just discovered this leak last week. Thank you for all you do

@jiggidyjam 2 года назад

I replaced mine today with 2 new belts and I also done a coolant flush too(per your other post). It wasn’t bad at all. Took me about 3hrs to do it all and I really took my time. Thanks a lot for your instructions. It really helped a lot

@jefferylara7679 2 года назад

Another video that I have nothing in common with, BUT because its you just making informative automotive videos I watch them. Thanks for your hard work bro!💯

@wauzdancer1556 2 года назад

Thanks. I bought a used 2014 F150 XLT with the 5.0 released from a fleet leasing company which overall runs great. Love having a truck again. Your videos really help before, as in the purge valve causing stall issues with no check engine error codes. Your video prevented me from chasing my tail or having to the Ford dealer who would chase their tails across my wallet. What a simple fix, thank you. I currently smell traces coolant when I park the truck after a it's warmed up. Only about a half a cup every couple weeks but don't see leaks, nor have overheating issues. But I smell it. Now with this video I know actually where to look for possible leaks since currently I can't not spot one. Going to watch your throttle body cleaning video, looking forward to that piece of knowledge shared to all of us out here. Thank you!!!

@oudude27 3 года назад

I do these regularly and that hose clamp on the y-pipe is no joke💪

@gregwarner9624 Год назад

Havent done my 16 yet, caught it dribbling 1 time this fall. Now i know the newer tech connections. Things have changed so much in the last 30yrs. Thx for the best videos. Now debating on whether me or Ford will fix my freezing latches.

@willie7257 6 месяцев назад

I can’t thank you enough for your expertise and this video. I’m a senior on a fixed income - I saved some serious dollars doing this myself. 55 minutes start to finish. Thanks again!!

@jt_gray 2 года назад

Thank you very much for the video! I enjoy doing these somewhat "easier" repairs. GREAT VIDEO! Thanks for what you do!

@supervirgil 2 года назад

You helped me fix my ford problems yet again. You also a long time ago got me the alignment specs for my 2016 f 150. Your a really great guy. I hope your Chanel doesn’t just go platinum but uranium. Thanks again.

@MrLobos55 2 года назад

Superb video, just finished doing both diffs and the transfer case on my 19 because of your other videos. I will be ordering parts here soon and looking more into how to completely flush the system plus probably doing a thermostat swap. Keep it up man, we all appreciate you!

@ret737 3 года назад

Going to start on my 2014 5.0 very soon! Thanks Brian for the very detailed video regarding this procedure.

@bobflannagan7262 2 года назад

It is a great joy to hear the proper vocabulary for everything. Thanks!

@GRENADE....... Год назад

Just did this couple minutes ago. Thanks for being the best Ford channel on RU-vid!! Got just under 200k on my coyote F150 and rely on your videos a lot for stuff like this! Only thing I see missing is you not having a video on the stretch to fit belt thats on early coyotes

@PlanetaryDefenseFoundation 6 месяцев назад

What a great way to start the new year :) 2016 f150 5.0 v8 at 91.000 miles, I replaced the seal and y joint. Follow these instructions exactly in this video with no issues afterward. Took me 45 minutes Thank you!

@edhoffmann9387 11 месяцев назад

Just did this on my 2014. I watched this video 3 times and I had the leak fixed in about 30 min. Great teaching going on here.

@gimmeacleveland3800 3 года назад

I have been a Ford guy since my first hand me down car which was a 70 mustang Mach 1. I have been fighting Fords engineering since day one. I had to remove the complete dash to change two nylon bushings on the clutch pedal!!! Fast forward some 35 yrs, ALWAYS worked on my own stuff and here I am with my 2014 F150 5.0. Always bought new fords and learned as I go. We are a long way from carbs and 5/16 hose clamps. You have helped me keep up with the times, keep my Fords running and problem free with your great videos! My 14 has every MINOR issue you have described. Water pump(junk), “O” rings, burn fuse and brake issues. Every time ….you have the video! Even my Transmission fluid change with no damn dipstick! Keep um coming pal, I only have 140K so at least 140K more to go on this one. Thanks

@jerryjeromehawkins1712 Год назад

👍🏽🇺🇸

@gimmeacleveland3800 8 месяцев назад

Well….here I am again. 203506 miles on same 2014 F150 5.0 and I am smelling antifreeze for about a week now. Couldn’t find anything but the level was obviously going down. Weekend came and I pulled the air intake apart to access water pump area (replaced at 75000). Nothing to see. Wiped my finger around the clamp on the thermostat and there it was. Leaking on the back side. I came in and jumped right on this channel and of course, he has the perfect video. Ordered parts from his channel and will be replacing all next weekend. Thanks again.

@billiebowling7755 2 года назад

Thanks for your video. Saved me a bunch of money. Walked out to my vehicle today to see a 2-ft puddle underneath my truck crawled under and seen it leaking from this part that you described.

@goldenboypromo9055 2 года назад

Skilled mechanic at god level 🤯 setting the standard for the rest

@shanerichardson4361 2 года назад

Thanks, I just recently noticed I had a coolant leak in my driveway and just came across this video and this was exactly the issue.

@tylerd.9457 8 месяцев назад

Literally had this open and would watch 5-6 steps and do them. Super easy with your play by play. Thanks man!

@magic1800 2 года назад

Had this same leak at the beginning of the year. Thanks for the video! 2011-f150

@CollinWillson Год назад

Thanks to your video I was able to diagnose the issue on my truck leaving puddles, and order the correct parts for the repair. Thank you for posting this.

@AntonioClaudioMichael 3 года назад

Good thorough demonstration very informative as always

@ethanisenberg1 Год назад

My plan was to replace the O-rings only - after viewing this video I decided to buy the Y-pipe and all of the other recommended parts. Thanks again for your great content. Ethan 2013 F-150 / 5.0

@chuckmerkins1631 Год назад

I watched this video some time back and sure enough, my 2016 5.0 F150 now has the same leak...parts are still the same on Amazon...you saved me hundreds of dollars...Thank you for the info...

@tomheater6149 2 года назад

Always professional and detail oriented

@mikefriday5325 2 года назад

Thanks to you and this video, I was able to fix mine today. Thanks for all of your videos and help

@robertdavis4184 3 года назад

I wish you posted this back in January after my 2015 F 150 5.0 went in the shop for the same problem. Down side the dealer had my truck for 11 days before they could get the part so they say.

@Janw2406 2 года назад

Thanks so much for this, saw my 2013 Mustang GT leaking coolant at the y pipe replaced the entire water neck with the metal one from Dorman as well as the gaskets, went very smoothly thanks to you

@countgrishnackh6823 2 года назад

Have you had any issues with the metal Y? Mine was an absolute bitch to get on, and yesterday my upper radiator hose blew off on me

@stevep5736 3 года назад

Very informative. Keep those videos coming !

@jeffbrown3963 Год назад

I just replaced the water pump and tee and the o-rings and I'll be #@####@# if it's not leaking again just 2 years later! Thanks for the refresher course. You're always spot-on !!!

@jacklantern6339 10 месяцев назад

Thanks for this. Great info, especially on the quick-connect hoses/ throttle body/purge hose. I didn't know the coolant hoses had to be aligned 'notch to slot'. Just did this repair 9-2023. Along with changing OEM belts and A/C Idler pulley(since I had it apart). 2014 F150@ 215K👍

@toddfuss1813 5 месяцев назад

I just finished doing this job. Went very smooth and your video was spot on. Burped system like said and nice heat flowing in cab at idle. Thank you brother!

@chrisperry7074 11 месяцев назад

Man this guy has taught me so much I can’t thank him enough he’s awesome

@fredsalter1915 3 года назад

Excellent video! Very descriptive & easy to follow.

@lancebangwell 2 года назад

Just did my 2016 today, so easy thanks for the tips!

@w.j.bendellr.c.flying.1037 2 года назад

Great Job, you make it look so easy. I love your work. ⭐️⭐️⭐️⭐️⭐️

@ryanbublitz9013 Год назад

Thanks for making this video, had to replace the exact same thing, very helpful!

@bkhammer3807 2 года назад

THANK YOU! This video save me an $1800 repair bill my local mechanic wanted for this job! The links to amazon parts were spot on! Done in 1 1/2 hrs! Works perfectly

@steveeab2364 Год назад

Yikes! I was too late finding this video and the dealer found and fixed it. Front/rear differential fluid replacement, new antifreeze and replacement of the Y connector and hose cost me just a hair under a grand.

@ZePanthersGang 5 месяцев назад

That’s the "we don’t want to do it price" haha

@marathonfreak67 3 года назад

Great video! I hate that new vehicles have so many plastic parts now and everything seems to be designed around assembly rather than durability.

@aninnymoose720 2 года назад

No.. everything is designed around cost effeciency. Durability isn't a thought beyond 3-5 years

@marathonfreak67 2 года назад

@@aninnymoose720 I don't even know who you are. 🤣🤣🤣

@aninnymoose720 2 года назад

@@marathonfreak67 lol nice to informally not know u 😉

@jamesortmann6587 4 месяца назад

@@aninnymoose720no..

@reelcs 2 года назад

Brian .. thank you for the comprehensive and concise videos. Son has 2014 f150 5.0 and sure at one point will need to replace y pipe. Thx!

@CT15MK18 2 года назад

Love your content brother. Very informative. Saved me multiple headaches..

@gil5731 2 года назад

Your video was a huge help. Thanks for making the content 🤙🏼

@jammils38 2 года назад

Thank u so much for all your hard work to bring this super important information to DIY guys like me. 👍 👍

@matt8663 2 года назад

Just did this repair. Thanks for the great video, it really helped.

@wrenchinwithruss4965 5 месяцев назад

Super video. No wasted of time or filler just great instructions Thank you.

@ronniekeener3802 3 года назад

Thank you Sir. Keep the 5.0 f150 2011 and up videos coming.

@rwreuter 2 года назад

Great video....answered all of my questions about this repair.

@tommckiney9789 Год назад

Thank you for your video! Used your video to do my repair. Love RU-vid because of videos like this. The hardest part was getting the belts back on. Thank you thank you thank you!!

@michaelwalsh8741 Год назад

Thank you for the video. Another COMMON problem with my FORD. I was almost Found On Road Dead today. This video helped me make the repair the same day and move on with my job👍🔨

@davisdavis3406 Год назад

cant say enough thank yous for your helping us to fix this problem. very professional

@Robert8455 2 года назад

Well filmed and explained. Thank you

@mikeloughnane5436 Год назад

Thank you! Followed your instructions in less than 1 hour was completed thank you for a wonderful video. You should be a teacher. Wish we lived close to your shop but I live north of the border near Niagara falls.

@cowboysfootballnfl Год назад

Bro, outstanding video. Took me like 20min and I started cleaning stuff it was so easy. Great video work and tone of voice. New Toyota Tundra subscriber who appreciate your help with my daughters Ford.

@danielpalattella5387 2 года назад

thanks for the video. It was my problem. This was harder to do than thought. Very hard getting all the connections to line up. I had to remove the thermostat housing & that made connections much easier. The connection to the thermostat housing is very difficult to line up due to the tension in the radiator hose, but removing the thermostat fixed that. I made that connection first.

@leefalls1880 2 года назад

Totally used this video to do this repair. So helpful

@randyburla9081 6 месяцев назад

Thank you very much. Explained very well. I follow your instructions on every repair job on my 2012 f150

@rxmidget 2 года назад

Thanks for the video! Just did this today on my truck. Only issue was I could not find the rad drain valve. Looked all over the passenger side lower section of the radiator. Ended up just popping upper hose off rad and letting it slowly drain down to the level of the Y hose and then changed it. 2017 F-150 XLT 5.0.

@revbikerbigd8664 Год назад

Your the best, thanks for making these videos for us, they really help us out a lot ! 👍👍👍👍👍

@stoddmi 2 года назад

Awesome and well explained video!

@MrPincheloko 3 года назад

Great video and thanks for those advices 👍

@timmbos 2 года назад

Awesome video. Thank you! I'm replacing my thermostat while I'm in there as well.

@stephenmorgan4552 8 месяцев назад

Thank you! This instructional video was very helpful and easy to follow. Again, much thanks 👍

@ACA8910 2 года назад

Thank you, you’ve helped me tremendously.

@dougbrower3879 2 года назад

Thank you, saved hundreds of dollars doing it myself.

@user-jj2sb8ge2k 3 года назад

Thank you so much for your helpful videos.

@matthewmizushima8420 2 года назад

Thanks for the advice. I just replaced my flat leaky o-ring for my upper hose tonight. Thanks for the top notch service help

@marioallard2235 2 года назад

What's o'ring size ? Thanks...

@matthewmizushima8420 2 года назад

@@marioallard2235 not sure I just had Ford look it up at my local dealership

@Jake-st5mm 2 года назад

@@marioallard2235 BC3Z 8590 F

@mikechiodetti4482 3 года назад

Thank you for the tech tips.

@TheTexican05 6 месяцев назад

FTMakuloco - your videos are always helpful and top-shelf. Fords have been a famous PITD in my shop, so I always like to look ahead for what's involved before I submit a bid to the customer or start on the repair. Thank you for all your hard work and contributions to the community. 🍻 👍 ❤ ✌

@TheBillp603 8 месяцев назад

Thanks for video, will be doing this on my '14 coyote F150 with 127K today. Found the puddle yesterday morning and was able to hit the dealer parts counter before they closed at noon.

@blainedahlseide780 3 года назад

Great video as always 👍

@JimmyMakingitwork 3 года назад

Bmw clip on hoses are so terrible and last only a few years… FORD: What a great idea! The AC quick connections went so well!

@SuperRanger1959 8 месяцев назад

Excellent video took me about 30 minutes plus fill and warm up time. Draining from the bottom of rad meant no spillage at all so belts were fine. Vehicle was completely cold I did cover belt area with rags. nice easy job. 2011 F150 5l

@ShuswapLivin 2 года назад

This video is so helpful. Thank you so much.

@bflatt5417 6 месяцев назад

Your videos have helped me so much man so grateful your smart and right to the point and you make sure we can see what your doing thank you thank you thank you!