2012 Dodge Ram 3500 Custom Subwoofer Enclosure, Focal Flax Speakers & SQL Audio Sound Treatment

Подписаться 18 тыс.

Просмотров 38 тыс.

50% 1

This is a one-part video on a 2012 Dodge Ram 3500 that we are working on. In this video, you will see all of the behind the scenes work that goes into putting together a high-performance custom stereo system in this truck.
--What we are adding to the truck:--
Custom Fiberglass Subwoofer Enclosure with Arc Audio X2 10" Subwoofers
soundsgoodstereo.com/products...
Arc Audio 1100.5 5ch High-Performance Amplifier
soundsgoodstereo.com/products...
Mosconi Digital Signal Processor
soundsgoodstereo.com/products...
Focal Flax 2-way Component Speakers
soundsgoodstereo.com/products...
Sony XAV-AX7000 High-Power 7" CarPlay/Android Auto Media Receiver with Bluetooth
soundsgoodstereo.com/products...
All of the installation, and fabrication was done by our team. Learn about us at:
Sounds Good Stereo Nashville
230 Fiberglass Dr
STE 201
Mount Juliet, TN 37122
soundsgoodstereo.com/

Авто/Мото

Опубликовано:

24 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@loudelvis610 3 года назад

If I had a dollar every time a customer ask me if I "turned the volumes up on amp" or " did set the power on amp all the way up"....I'd be a millionaire...I don't even try to explain gains anymore...lol.... I set and put tamper sticker over gain hole on amp.

@moreaudio760 3 года назад

The one thing that sets you guys apart from the rest , it’s not an act when your recording your episodes ,just continue being humble and bad ass car audio installers ..

@SoundsGoodStereo 3 года назад

Thanks!! We appreciate it! Just posted a new video, check it out!

@johnsteger 3 года назад

Back to back to back episodes...hell yeah 😎 🙌

@SoundsGoodStereo 3 года назад

😃😃😃

@chriswhite4596 3 года назад

Fantastic job , Guys !!!! Sounds great and Box turned Out Flawless

@SoundsGoodStereo 3 года назад

Thanks!!!

@chriswhite4596 3 года назад

And yes , those Kicker Dash Coaxials are Phenomenal !!!!

@kellenstrickland3847 3 года назад

Wish I lived closer to you I'd drop my 2015 limited 3500 off in a heartbeat! Nice work 💪🏾

@kellenstrickland3847 3 года назад

I got the Utopia M 3 way setup like in the video but with 2 Helix C Four amps and Helix DSP Ultra. With the Flax components for rear fill. Wish you had a video or picture of the sound treatment after it's all put in. I want my megacab fully sound treated. My driver door rattles bad just with the factory system

@Clint_L 3 года назад

Hell yes. 2020 has been so crappy. Been in lockdown since pretty much March. Now all these videos this week has made me smile for the first time in ages. Could 2020 be improving🚴 Thanks my friends. Keep at it

@SoundsGoodStereo 3 года назад

❤️❤️❤️

@SoundsGoodStereo 3 года назад

We have one or two more... been slammed and haven’t had time to edit them. Figured I would slam a week out with some videos!! Thanks for the love and be sure to not kiss tomorrow’s video.. You will get to meet “Peaches” 🤣

@derekstechmann6610 3 года назад

Fantastic job , Guys !

@SoundsGoodStereo 3 года назад

Appreciate it!!!

@bol922 2 года назад

Awesome box!!! Never used sound deadening in the box

@chriswhite4596 3 года назад

Lol , I love giving y’all a Hard time !!! Keep doing Yalls thing ... 🤘🏻🤘🏻🤘🏻🤘🏻

@r.cramer15 3 года назад

Nice job !

@SoundsGoodStereo 3 года назад

Thanks!

@lew-e 2 года назад

Planning the stereo build on my 2021 ram 2500. Selling some parts from the chevy and buying the amp ap4-ch41 then its a matter of planning out the layout for the amps and building a sub box. Excited to run active for the first time, but nervous as hell lol

@officialbigboiofdbc 2 года назад

Camera man at the beginning looks exactly like zac from hoonigan

@alexoviedo9107 3 года назад

Nice 👍👍👍

@SoundsGoodStereo 3 года назад

Thanks

@Robertb00 3 года назад

You can squeeze DC level 3 12s under those seats with a seat spacer. I have a Jekyll and Hyde type of listening preference.

@SoundsGoodStereo 3 года назад

It is possible, but need a custom shop that really understands enclosure design to pull it off.. I would recommend building the enclosure first, measure the airspace and then choose the best subwoofers for the airspace.

@bugsysiegals 3 года назад

I’ve never done fiberglass but have a wood working shop in the basement and am willing to tackle making my own enclosure after watching you guys knock this out, thanks for showing us all how it’s done, and you guys are really cool funny guys! That said, how much air space do you have there or if you raised the seats and built it taller? I’m considering 2x JL 10w3’s or 10w6’s but am not sure either will work with speaker height, ideal cubic air space for each, how to tune the box, etc. FWIW - I’ve a 17’ Ram Sport Quad Cab.

@crazyscott71 3 года назад

yall should look into the fox acoustic/ fox box. I have 2 of them a two 10s ported and a single 12 ported really nice boxes

@SoundsGoodStereo 3 года назад

We have used them, but we are picky on the performance for our clients. So when we can build the enclosure that best fits the subwoofers requirements, we can achieve better results. But for most people the Fox box will work just fine

@JohnnyFiction989 3 года назад

Do you make a kit for the 2018 Toyota Camry?

@jamesthecooldad 3 года назад

When are we going to see that Impala on gold spokes?

@raytonwhite4187 Год назад

What was the spray you used to coat the tape. And what kind of tape did you use.

@andrebraun9290 3 года назад

How much airspace was in the bottom fiber glass part

@junioramon2013 3 года назад

What's the thickness on the wood trim

@calebs4899 2 года назад

These fellas gonna make an enclosure for 5th gen ford ranger

@mattroadfeldt9012 3 года назад

Good work! What do you use for mold release?

@calvinhobbs89 2 года назад

Pva is the best but any type of wax release mold wax but the finish side of the tape not adhesive side also helps or will work to release glass

@sub10s76 3 года назад

Looks awesome. I was thinking the same thing I have 15 ram 2500 Cummins 60/40 back seat. Raised the seats 1.5 inches. I want a fiberglass box to put my jl 10w6’s in. Do you guys build them.

@SoundsGoodStereo 3 года назад

We do build them like the video, but are not shipping them. If we receive a big enough request, we might start shipping them. But currently, in store only

@philipduncn1495 5 месяцев назад

I know I'm a little late to the video but did you guys ever decide to start building boxes and shipping them I have two 10-inch DB Drive g2's that I want to put in a 2012 Ram 1500 been considering building my own most prefab boxes we don't have quite enough mounting depth I need at least 7 inches mounting depth for those subwoofers

@SoundsGoodStereo 4 месяца назад

No, it’s not something we will offer. Very focused on the current enclosure designs and select other vehicles. Maybe one day we will circle back around to this truck

@ericlindeman9765 2 года назад

Thoroughly enjoyed watching this build. Looking for solid tips and tricks on doing a similar box on my '17 1500 Ram. Would it be possible to give an approximate on the tuning of the box? If not that. The approximate size of the cutout on the port? Any info would be greatly appreciated. Job well done, fellas.

@tonyr2558 Год назад

port size on the box would be completely different considering what subs were used

@bigblack1072 3 года назад

Where you guys located? Y'all do awesome things

@SoundsGoodStereo 3 года назад

Thanks!! We are 15 minutes outside of Nashville, TN

@juanpinon5779 2 года назад

Cuántos kilos de fibra te yevaste en total?

@sjaxon29 3 года назад

Is it possible to get the box done for a couple 12’s? I’ve got a 15’ crew cab Ram.

@SoundsGoodStereo 3 года назад

We would need the truck here to do it.. Contact our retail side and they can schedule you in. Soundsgoodstereotn.com

@cabinfever1386 Год назад

Don’t know if it’s intentional but the affiliate links to the gear are not working. Great job on the installation and the vid. 👊🏽👊🏽👊🏽

@SoundsGoodStereo Год назад

You can see what products we have on our website, but not much for this RAM soundsgoodstereo.com/

@ruckus1721 3 года назад

Do you guys happen to have a better step by step build on that ported box? I’ve seen a few vids on making a similar box but none have shown a ported one and it looked pretty fast on this video.

@SoundsGoodStereo 2 года назад

Maybe in the future, but not at the moment

@ruckus1721 2 года назад

@@SoundsGoodStereo I’ll still be attempting to mimic this port this weekend lol. Great vid guys!

@joedelpopolo4087 2 года назад

Nice box I have a Question for you about the build.. when building the box and laying down the fiberglass resin how are you fixing the fiberglass to the wood trim perimeter to construct the initial volume part of the box before adding the top that will have the sub opening? I've watched multiple videos and it looks like everyone is applying the resin up the side and barely going on the top side of the perimeter. I can't see how the resin wouldn't break free once bass is added. Is the screws that stick out that gives the resin a bite to the wood or is the bond just that strong that it just stays once the top is screwed and glued? I would think you would want to add layers over the top around the sides but that would cause fitment issues right. Please explain this step for me if you don't mind.. thank you

@SoundsGoodStereo 2 года назад

The MDF wood is very porous, so the resin absorbs into the wood and creates a bond. Kinda like wood glue at the joints, the glue once dry is stronger than the screws/staples.

@joedelpopolo4087 2 года назад

@@SoundsGoodStereo thank you that is what I was guessing from exactly what you mentioned it works how glue would. Thank you this will help me with my build for my town and country. Appreciate it again.

@dodgeman4046 3 года назад

What do you do in the mega cabs for a sub enclosure im looking for one that doesn't fill up behind the seat

@SoundsGoodStereo 3 года назад

We do all types of enclosures for the Mega Cab. Just need to find a shop, tell them your requirements and let them build you something

@kellenstrickland3847 3 года назад

Hey Dodge man just had my system installed in megacab if you need any ideas I can send u pictures of my setup.

@quinceymorton6269 2 года назад

What was the air space with the box. Im thinking of building one myself.

@SoundsGoodStereo 2 года назад

It was around 2.8 cuft. Worked great 👍

@bradleewitt4048 2 года назад

Can you do the 6x9 adapter to 5.25” with 1” tweeters??

@SoundsGoodStereo 2 года назад

We could, but the CAD drawing cost would be $100 plus the adapters. Let us know and we can make it happen

@markbest4230 3 года назад

How did you guys determine the port for the fiberglass enclosure? And how do you determine the volume approximately with all the different surfaces? Water? Styrofoam peanuts 🥜?

@SoundsGoodStereo 3 года назад

We use this to test air volume and tuning frequency: www.wccaraudio.com/smd-im-sg-impedance-meter-signal-generator.html

@markbest4230 3 года назад

@@SoundsGoodStereo Sweet! Thanks, I've got the DD/CC pieces... will be adding this too!

@eddiemenchaca7224 3 года назад

What kind of adapters did you use? I had some Scosche, but it required cutting and dremel work. Looked like your adapter didn’t need any extra cutting

@eddiemenchaca7224 3 года назад

I have the focal flax and have to cut the Scosche adapters, but would prefer adapters that don’t require cutting. If you have a link to the adapters, that would be awesome! I assume whatever works for this Ram would work for my 2019 Ram 1500

@SoundsGoodStereo 3 года назад

We made the adapters in-house. Hopefully, we will have them for sale on our site in the near future

@naturalstatepoolandspallc338 Год назад

any issues with subs hitting the bottom of the seats?

@SoundsGoodStereo Год назад

No, but it was close

@chrisanderson7937 3 года назад

Around how much air space is that box? I got a massive audio gtx 104 10” I want to build a ported box and want at minimum .92 cu ft to 1.25 cu ft

@jwbboy 3 года назад

Would like to know this as well.

@SoundsGoodStereo 3 года назад

I actually don’t know exactly, but I assume 1.8 cuft based on previous ones we have done.

@tinkerintony2178 3 года назад

? What did you guys spray, on the masking tape? Silicone?

@bayouboattrash 3 года назад

Mold release spray. I think I know how I'm gonna build my box for my 04.5 now.

@jdburnsu 3 года назад

What are you spraying on the tape before fiberglassing it?

@Justthemow 2 года назад

I can’t tell what type they are using but it’s just fiberglass spray release basically sprayable silicon oil

@1986dondada 3 года назад

Would you recommend a 5 ch amp for this build or would you have preferred to use 2 amps - a mono and a 4ch? dumb questions... my apologies in advance.

@SoundsGoodStereo 3 года назад

5-Channels work well for most customers

@LC8FTW 2 года назад

How did you figure out the volume of the molded enclosure? By pouring gallon jugs of water in it until it's full?

@SoundsGoodStereo 2 года назад

Great question! So we use a test tool, same as this video (start at 4:53) and this tells us the real air volume of the enclosure. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kc4AvfomdIQ.html

@LC8FTW 2 года назад

@@SoundsGoodStereo IMSG. Interesting. I'll have to dig into the spec of that device and see if they published its margin for error.

@Watchingyou-daily 3 года назад

KFC-XP6903C would have been a decent alternative or maybe KFC-XP6902C depending on the speaker size in that dash.

@SoundsGoodStereo 3 года назад

For a basic upgrade, yes.. But bigger is not always better, so the Focal Flax components were the perfect choice.

@Watchingyou-daily 3 года назад

You still would have clearance issues. You have to notch the lip of the factory midbass hole.

@rogerlopez1948 3 года назад

How much would a drawer like this cost for a 2014 ram quad cab?

@SoundsGoodStereo 3 года назад

Average subwoofer enclosure custom built like this is around $1,300

@guybob123 3 года назад

What is sprayed on top of tape?

@SoundsGoodStereo 3 года назад

Mold release

@michaelflowers6048 Год назад

How exactly did you calculate the air space?

@SoundsGoodStereo Год назад

Here is the process at 5:05 in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kc4AvfomdIQ.html

@michaelflowers6048 Год назад

@@SoundsGoodStereo I guess what I should have said is. How did you calculate the dimensions of the box to build to reach the adequate airspace? For example say you have two 12s to fit in this box that require 1.02 cubic foot of airspace each, how would you know how big to build the box with this odd of a shape? The subwoofer box that is in the Ram 3500

@SoundsGoodStereo Год назад

Not really a easy way to do it. We always build the enclosure first, then measure the airspace and then find the best subwoofers to fit that airspace. We never go into a project like this assuming the subwoofer size first, unless we have already measured in a previous vehicle. Your best option is to build it as big as possible and then shrink it down if you need to. Another option is to use sand and fill it up, then measure.

@bol922 Год назад

Better sound with 6 1/2 over 6x9?

@SoundsGoodStereo Год назад

In some cases yes. If its a better 6.5-inch, but most higher-end speakers do not come in a 6x9

@bol922 Год назад

@@SoundsGoodStereo I'd love to do the sake with my 14 Ram. Hard choice of 6.5 or 6x9 and what brand anymore. I was in it huge 15yrs ago. Family changes everything. But it didn't stop my love for racing and sound systems.

@HennyTRX3773 2 года назад

What's those boxes tuned to?

@SoundsGoodStereo 2 года назад

Always 33-35hz from us.

@HennyTRX3773 2 года назад

@@SoundsGoodStereo how many cubes per

@SoundsGoodStereo 2 года назад

@@HennyTRX3773 Honestly do not remember exactly. But you can assume 2-2.25 cuft total for these vented as that is what these subwoofers require for good performance.

@theoneandonly2590 3 года назад

How much for that exact setup?!?! Need that in my 2018!

@SoundsGoodStereo 3 года назад

This setup I believe was $5,500 total... in the future, we might offer this as a package we ship

@pyrojoe1404 2 года назад

@@SoundsGoodStereo do yall make these boxes and sell them?

@flow3642 3 года назад

How many sound mats did it take to sound treat this ram? I want to sound treat my ram.

@SoundsGoodStereo 3 года назад

We used a entire bulk kit, around 10 large sheets. Here is the link: soundsgoodstereo.com/products/sql-audio-soundmat-bulk-pack

@chriswhite4596 3 года назад

Tell DJ to get with the Program , lol ..... we know y’all aren’t Stupid , but instead of sitting there watching D.J try and out a Screw in , you could walk around the Bay and Discuss other Projects going on , or coming up to keep Viewers excited !!!!

@jmcguire708 2 года назад

"hopefully not punch a driver." why would you ever drill with the speaker in the adapter??? use a silver sharpie or a center punch man, don't even risk it! and yes, we've all done it at least once...

@Cooper3312000 3 года назад

Those rear windows are prone to leaking and leaving a swamp under the backseat and damaging audio equipment my 2500 did. Ended up selling and buying a ford hah.

@SoundsGoodStereo 3 года назад

Everything is mounted on plastic, so we will see if the customer runs into any issues.. didn’t know that about the Dodges

@asheetuglasse 3 года назад

It's not the windows that leak it's the third brake light

@Cooper3312000 3 года назад

asheetuglasse that was the first thing I tried but it was dry it water came in from the seams on the upper corners of the cab roof the seam seal was cracking letting water poor in all around the window I had two to three inches of water in my back seat every time it rained.

@chriswhite4596 3 года назад

Wiring 101... Soldier every speaker No matter what , unless there Spring loaded terminals