2013 Chevy Sonic Timing Belt Replacement 1 8L

Подписаться 5 тыс.

Просмотров 37 тыс.

50% 1

torque wrench: Check this out on Amazon
LEXIVON 3/8-Inch Drive Click Torque Wrench 10~80 Ft-Lb/13.6~108.5 Nm (LX-182) www.amazon.com/dp/B07M68G49R/...
CAMSHAFT LOCK: Check this out on Amazon
Orion Motor Tech Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.4 1.6 1.8 en6340 km6340 www.amazon.com/dp/B07Z65PGPR/...
E TORX KIT: Check this out on Amazon
LEXIVON E-TORX Socket Set, Chrome Vanadium Alloy Steel | 13-Piece Female Star Socket E4 - E20 Set | Enhanced Storage Case (LX-147) www.amazon.com/dp/B087V5QYT9/...
TENTION PULLEY: 40 FT LBS
IDLE PULLEY: 37 FT LBS
CRANKSHAFT BOLT: 111 FT LBS
Disclaimer:
Due to factors beyond the control of Anything Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Anything Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Anything Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Anything Auto, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
If an Anything Auto Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and Publish so every dollar spent goes a long way. CLICK HERE:
/ anythingauto
Anything Auto Store: anything-auto.creator-spring.com
Instagram: anything201...
GET YOURSLEF HIGH QUALITY LED LIGHTS FOR THIS & ANY OTHER VEHCILE IN THE LINK USING MY REFERRAL CODE AND GET A DISCOUNT ON THESE BULBS:
BULBS REFERRAL LINK: auxito.com/SDhhqvNa
USE COUPON CODE: Anythingautorepair

Хобби

Опубликовано:

25 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@screwball191145 13 дней назад

Great video man. That was as accurate and clean of a "how to" as I've seen. Walked me right through it. You didn't miss a single bolt or process. Thank you.

@AnythingAuto 13 дней назад

@@screwball191145 i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@JonSolow13 5 месяцев назад

This is a first class video tutorial. Really well done!!!

@AnythingAuto 5 месяцев назад

i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@michaelleszczuk4037 Год назад

Watched your video a couple times and followed the process this past weekend. Everything went smooth. I thought your video flowed well and was easy to follow.

@AnythingAuto Год назад

I am happy the video was helpful. Now Id you can help me by hitting that like and subscribe button

@user-os2jl6zj6k 2 месяца назад

I followed your video step by step I even did the same thing with the water pump. You made this job easy and saved me $

@AnythingAuto 2 месяца назад

@wisdomsquare28 9 месяцев назад

Put a small cheater bar on the end of your rachet. Makes pulling and reinstalling serpentine belt much easier. Go to Lowe's and get you some pipes to fit over end of your different rachets. You can cut various lengths and sizes for different settings. Thank you for taking your time and sharing this money saving process.

@AnythingAuto 9 месяцев назад

I broke down and bought the pulley tool finally. After 50 belts I said fine lol. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@chrisbrotherton 8 месяцев назад

I’ve watched at least 10 timing belt videos for Sonics, Cruzes, etc. wish I would have come across yours sooner. Hopefully it’s still kicking after a year!

@AnythingAuto 8 месяцев назад

It's doing great actually. Small fender bender but still running. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@Paul-ns8fr 4 месяца назад

Thanks for makeing this video its one of the best ive seen.

@AnythingAuto 4 месяца назад

@Paul-ns8fr 4 месяца назад

@AnythingAuto I've never liked or subscribed to any video but I will try to figure out how to do it for you.keep up these awesome videos..

@natioffline Год назад

Thank you very much for sharing this helpful video

@AnythingAuto Год назад

i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@mattgarcia9687 2 года назад

In order to get the water pump pulley off, you have to lift the engine so that one bolt clears the frame. Once that bolt is out,rotate the pulley and get the next one and so on. I used an air ratchet.

@AnythingAuto 2 года назад

Thank you updating everyone. Someone emailed me and told me and I did that. I couldn't stop the pulley from spinning because I removed the belt like a moron. I knew better to lol

@darrendejong3018 2 года назад

The crankshaft bolt is a tty (torque to yield) bolt. There’s a specific torque and then a degree spec you need to abide by in order to torque correctly.

@adanmartinezrgctx 2 года назад

What is it?

@AnythingAuto 2 года назад

All info is in the description

@timm2891 Месяц назад

Ok give a little help tip here for serpentine belt since. Im working on my 2013 sonic myself when moving the tensioner to get belt off or on there is a hole you can put in small screw driver or philips or anything round fits in hole to hold tensioner forward so you can get belt off or even putting it on by yourself.

@AnythingAuto Месяц назад

@Geoffreys-adventures 2 года назад

I did the timing belt on my chevy cruze and i didn't tighten the harmonic balancer bolt to torque spec and it came off and caused me more problems then it was worth. Make sure it has been torqued to spec or you could have more issues.

@AnythingAuto 2 года назад

Absolutely

@leonardodavila5270 2 месяца назад

Great video, but where is the part you change the water pump

@AnythingAuto 2 месяца назад

Couldn't show it. Very easy to do. Couple bolts. Everything comes in the box. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@duaneulman9915 Год назад

Thank you

@AnythingAuto Год назад

I hope the video helped. If it did please like and subscribe for more :)

@benoit8850 Год назад

Man, people are picky, that was an awesome how to, now I know what to expect on mine👍🏻

@AnythingAuto Год назад

Keyboard warriors are brutal. No one thanks all thr RU-vidrs who save them thousands in Auto repairs by showing them how to do it themselves but it is what it is. i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@benoit8850 Год назад

@@AnythingAuto thanks, I will

@pauls9247 3 месяца назад

After much gnashing of teeth, i used a strap wrench on the water pump pulley to get it off.

@AnythingAuto 3 месяца назад

@carlos.75 2 месяца назад

Great video, what torque speck on the crank pulley?

@AnythingAuto 2 месяца назад

Thank you. Make a donation to the channel and I can look that up for you. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@jerry0947 Год назад

Thanks, after watching the video, I decided to go to the dealer.

@AnythingAuto Год назад

Oohhhh it's not that bad. Just time consuming

@isaacflores8398 Год назад

I took my car to the dealer and instead of Messing with changing the time belt they wanted to change the engine for $9k so good luck

@MrNobody0369 6 месяцев назад

This is a great video I'm struggling with 19:42. If I turn that the whole thing spins, why is yours not?

@AnythingAuto 5 месяцев назад

You turn what? The crank bolt?

@kaitlynsnow5249 Год назад

About 24 to 25 minutes into you installed a small bracket like tool underneath the engine near drivers side of the block with that 15mm nut. What does that little tool do? Where can I buy one?

@AnythingAuto Год назад

That tool is included in the kit. As far as what it does I have no idea because that was a while ago. I was doing a step by step from GM so that you guys didn't have to buy it. I already did.

@edivaldi6790 5 месяцев назад

That is a flywheel locking tool. It is used to lock the flywheel in place so the crankshaft does not move. If installed properly, the tab fits between the oil pan and the transmission, and prevents the flywheel from turning

@zachaustin9126 2 года назад

am trying to put the new timing belt on. I had the locking tool in place between the camshaft sprockets with marks for all three sprockets sitting where they needed to be. Upon attempting to slide the new belt on, I had the crankshaft sprocket on the bottom actually rotate clockwise about a 1/2 tooth. I am unable to simply rotate it back counterclockwise because the bolt is not a reverse thread and therefore doest grab going on that direction. What would you recommend at this point? I still have the top camshafts locked in place with their timing marks in the proper position.

@AnythingAuto 2 года назад

Wow sorry I always answe back quicker. It didn't tell me! I'm sure you figured it out by now. The half tooth shouldn't matter. I had to rotate one to fit the belt on myself

@danp7463 2 года назад

Use an impact wrench with only a few impacts into the bolt. It will hold just fine for moving the crank pulley anticlockwise.

@chrisbrotherton 8 месяцев назад

I’ve seen diagram on (AllData or timing belt handbook) which mention putting timing belt around intake sprocket first then clockwise to exhaust sprocket and eventually ending with tensioner. It seems to make it more difficult getting it around the crankshaft down below, but pays off in having slack next to the only part that allows for movement.

@CleranceElva Год назад

I replaced the timing belt and oil cooler, now my engine in making a rattling noise. Any idea what it could be? I’m afraid that I did something wrong

@AnythingAuto Год назад

No I'm sorry. Taking it apart and checking may help but wouldn't mess around. Very important parts there. Something might not be torque to spec

@trevorhowell8324 2 месяца назад

Water pump is external on these, it is on my 2013.

@AnythingAuto 2 месяца назад

Timing belt and water pump is replaced together. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@sahilsangwan6371 8 месяцев назад

Where is the water pump to the timing belt? I didn’t see that!

@AnythingAuto 7 месяцев назад

Stupid footage deleted. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@johnbishop7912 Год назад

is that Jackstand under the right front suspension that is only barely touching the cradle with the very tip of one of the two ends actually bearing any real weight there ? Because if it was, it appeared to be placed very carelessly / dangerously ! Just sayin', I wouldn't want you or anyone else to get hurt doing this relatively simple repair simply because Jackstands weren't positioned properly.

@AnythingAuto Год назад

1 probably but u always use 2 3 ton jackstand and a 3 ton jack. Safety first. Also always use eye and hand protection. i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@johnbishop7912 Год назад

@@AnythingAuto A three ton jack for a one ton car ? Why, and how in the world does that answer ANY OF my questions / concerns ? You start the answer off with 1 probably ? What does this answer even mean in "Engrish" ? 😏

@AnythingAuto Год назад

@johnbishop7912 1st question, I work on full-size pickup trucks, some weighing 7000lbs so 1 ton jack will not cut it. Answer that question properly? You stated you saw 1 barely touching. That may have been, but I use 2 stands and 1 jack. That tiny car wouldn't crush 2 3 ton jack stands and 1 3 tons of jack. I didn't buy any of those from harbor freight. Does that answer satisfy you? i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@jimmyramey1157 Год назад

How to loosen the timing belt in a 13 Chevy sonic

@AnythingAuto Год назад

you lost me

@Aguazul32 Год назад

When I did the two turns after placing the me timing belt on, the top marks were off by a tooth. How do I fix this?

@AnythingAuto 10 месяцев назад

As long as the marks are on the notch your timing will be good. Just put it on the mark. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.