Тёмный

Chevrolet Cruze Timing Belt Replacement (+ water pump, 2014 Chevy Cruze) 

Make It Easy Mechanic
Подписаться 118 тыс.
Просмотров 71 тыс.
50% 1

Showing step by step how to replace a timing belt and a water pump on a 2014 Chevrolet Cruze with a 1.8L (4 cylinder) engine.
Time Stamps:
00:00 Intro
00:59 Required Tools
01:14 Disconnect battery
01:30 Drain Coolant
02:00 Air Cleaner Assembly Removal
03:00 Upper Timing Cover Removal
03:24 Gain Access to the front of the engine
04:20 Jack Up the Engine
04:45 Front Motor Mount Removal
05:40 Drive Belt Removal (Serpentine Belt)
06:16 Drive Belt Tensioner Removal
06:27 Timing Marks - Set the engine at TDC
07:14 Engine Mount Bracket Removal
07:43 Bottom Timing Cover Removal
07:52 Harmonic Balancer (Crankshaft Pulley) Removal
08:35 Middle Timing Cover Removal
08:52 Timing Belt Removal
09:31 Timing Belt Tensioner and Idler Pulley Removal
09:45 Water Pump Pulley Removal
10:12 Water Pump Replacement
11:00 Idler and Tensioner Pulley Installation
11:55 Timing Belt Installation (how to align timing belt)
14:40 Put everything Back Together
17:40 Conclusion
Affiliate links to products used or mentioned in this video (same or similar):
amzn.to/2IK9orQ - Timing Belt and Water Pump Kit
amzn.to/35Cd2ww - Timing alignment tool set
amzn.to/2Uztqb3 - Torx Socket Set
amzn.to/35CZlOd - E Torx Set
amzn.to/3fclgPi - Chain wrench
amzn.to/3kBLv2K - Impact Gun (Impact wrench)
amzn.to/2IEJAgH - Blue Thread Locker (Locktite)
amzn.to/35AVkd5 - Paint Marker
amzn.to/3kBPe07 - Low Profile Floor Jack
A few more products I personally own and use (same or similar):
Basic Hand Tools - amzn.to/2I91cBb
Drill and Impact Driver - amzn.to/2WCMxzI
Cordless Ratchet - amzn.to/2KcBsBw
Portable Jump Starter - amzn.to/2HR0V4l
Fluke Multimeter - amzn.to/2HQOx42
Code Reader - amzn.to/2HRwdI4
Upholstery Remover - amzn.to/32dXTiS
Pocket screw driver - amzn.to/2HQrPcE
Pocket Flashlight - amzn.to/3j32AVF
Hook set - amzn.to/2JUdfTi
Disclaimer:
Due to factors beyond the control of Make It Easy Mechanic, it cannot guarantee against improper use or unauthorized modifications of this information. Make It Easy Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Make It Easy Mechanic recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to factors beyond the control of Make It Easy Mechanic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Make It Easy Mechanic.
Keywords:
timing belt replacement, timing belt kit
, timing belt vs serpentine belt, timing belt price, timing belt warning signs, how to check timing belt, what are the symptoms of a bad timing belt, timing belt purpose, water pump replacement labor hours, serpentine belt tool, serpentine belt tensioner, serpentine belt diagram, motor mount bracket, engine mount bracket, engine mount replacement, Chevrolet Cruze Timing Belt Replacement, Chevrolet Sonic (Holden Barina) Timing Belt Replacement, Chevy Cruze, Chevy Sonic, Chevy Aveo

Авто/Мото

Опубликовано:

 

2 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 90   
@DustinDoesStuff
@DustinDoesStuff 3 года назад
This is the best video I've seen someone make on how to work on a vehicle. This guy is very descriptive, gives alternate ways of performing a task, the camera is always in the perfect position, tells you the torque specs, list every tool your going to need at the beginning of the video, time stamped the video, and has links to the parts and special tools in the description. Great video man, keep up the good work!
@shaynekimball6844
@shaynekimball6844 7 месяцев назад
agreed
@matthewlobberecht6187
@matthewlobberecht6187 4 месяца назад
Mine are better
@stevenallen6245
@stevenallen6245 29 дней назад
I jus did 20 foot lbs for both idler and tensioner pulleys still running good this is good instruction 😂well done
@DM-sz5rs
@DM-sz5rs 3 года назад
Excellent video saved my butt. I bought the locking tool kit it was junk didn’t fit thought I was sunk then I watched your video how to simply marked the teeth on the gears in relation to the plastic housing genius! But I have to say it took me about 17 hours not 20 minutes like in your video LOL. For other people reading some of the troubles I ran into were loosening my drainage plug. A cheap nylon screw very flimsy I wasted 45 minutes and finally pulled one of the hoses off to drain the coolant. The other problem I had was putting the splash guard back on pieces were missing so I just used a few zip ties and drilled a couple holes no she’s tighter than ever. One other issue was when I was all done I had a cooler line leak where the aluminum pipe attaches to the thermostat housing luckily I had an O-ring that would fit and was able to secure it without a leak. Again great video thank you so much for taking the time.If you’re ever on the big island in Hawaii say hello Mahalo Dave
@user-ob7qn4sj4s
@user-ob7qn4sj4s 2 месяца назад
Well done!! That was one of the best instructional videos I’ve seen. To the point, sufficiently detailed and very comprehensive. After watching this I would be confident to have a go at this repair. Again well done 👍
@acamt
@acamt 2 года назад
2016 chevy sonic...1st time changing timing belt, did it solo...followed these steps but had the locking tool kit and hand tools...took me 5hrs...she fired up...drove it across the yard, parked it and celebrated with a cold one...thank you for the video...
@tomhendricksen1805
@tomhendricksen1805 2 года назад
After many hours of trying to get the timing belt over the tensioner I finally found this video, which showed me I needed to remove the locking tool from between the cam sprockets and turn the intake cam to tighten the belt between the camshaft sprockets. Once that was done I had enough belt to get it onto the timing belt tensioner in a few seconds. Thank you for showing this method of changing the belt.
@virginiarelichunter3475
@virginiarelichunter3475 2 года назад
Thanks for this video. I just did my daughter’s car changing timing belt and water pump. I did it step by step just like you did and it went perfectly!! Thanks
@usama6028
@usama6028 3 года назад
frankly. this the best timing belt video i saw. thanks
@JunkyardTavern
@JunkyardTavern Год назад
Im not a Mechanic, But my notice light came on for timing belt replacement at 100k miles. on my chevy cruz 2014. I want to commend you on such a well presentation video. everything was so well explained and with details process videos. Unfortunately for me I dont have all the correct tools to do this myself but if I did i would have no problem doing this job after seeing your video. WELL DONE! you earned a subscriber for sure!
@kolankprof
@kolankprof 2 года назад
Excellent overview of how to replace my 2012 Chevy Cruze LS Timing Belt. Thanks for sharing your expertise!!!
@gosgraproperties8687
@gosgraproperties8687 2 года назад
This is the best video I ever watch on RU-vid. Please my friends send gifts to the producer
@herilor1
@herilor1 3 месяца назад
Thanks so much for a great video. One of the best walk through I've followed.
@elena6516
@elena6516 3 года назад
Great video, as usual. No nonsense, full detail.
@upfactoryracing4148
@upfactoryracing4148 3 года назад
Great walk through! Nice and thorough with specs!
@daviddrouillard3534
@daviddrouillard3534 Год назад
Fantastic detail, yet concise, along with reasoning for the precise process steps. Thanks for spending the time to produce this superb video.
@pinkfloydscorpio
@pinkfloydscorpio 3 года назад
Thanks for the video. Got a Sonic timing belt job in the morning and found your video while looking for some tips. Nice, professional video. Thanks again, from one tech to another.
@domrider854
@domrider854 3 года назад
Very clean and clear, Thank you sir this will guide me through this job
@djdkenergy
@djdkenergy 2 года назад
Definitely love the detail and quality of this video my friend! Will definitely be referencing it as we change our timing belt! Thank you
@towitowi1
@towitowi1 2 года назад
Świetny film. Dokładnie to pokazano . Spokojnie i bez pośpiechu. Dzieki
@alexathrottle5232
@alexathrottle5232 3 года назад
Nice job. Very well-done tutorial. Thank you for this
@stevehazelett2240
@stevehazelett2240 10 месяцев назад
Most descriptive video I've ever seen. Great job.
@RingZero
@RingZero 10 месяцев назад
Fantastic detailed video and I dont even have a Chevy Cruze. The instructions and details were very clear and it was a pleasure to learn the sequence and methods used in this installation. Thank you!
@daviddrouillard3534
@daviddrouillard3534 Год назад
Great detail. Thanks for the fastener head sizes and the torque.
@randyehrick8011
@randyehrick8011 2 года назад
Great job. Thank you so much! Feel much better about doing mine now. THANK YOU!
@bradynorris1653
@bradynorris1653 3 года назад
Thank you very much. This video made the job so much easier.
@johnstevenson1043
@johnstevenson1043 2 года назад
Gotta say - that was outstanding
@Steve-qw8hj
@Steve-qw8hj 2 года назад
This video was perfect had the ideas and information I needed saved my week!! Thank you !!
@uponalex
@uponalex 3 года назад
Thank you sir. Very well put together video love the times in the description
@michaelheadley4847
@michaelheadley4847 3 года назад
Great video...plenty details 👍
@jwest613
@jwest613 Год назад
awesome video ! EXTREMELY helpful
@a.f1785
@a.f1785 10 месяцев назад
I subseibed because of the way you explain and your simple technique, great video
@BJ-fh2xc
@BJ-fh2xc 2 года назад
Very well done sir! Thank-you.
@kieranhimself9124
@kieranhimself9124 Год назад
Good to see the moved the power steering pump since 2011
@kevincahill360
@kevincahill360 2 года назад
Unlike other videos I watched this one was dead on factual and informative, however if you are not experienced, I do not recommend doing this without the locking tools. Being off one tooth could be catastrophic
@WayneCook306
@WayneCook306 3 года назад
Very good video, Best I have seen for a while..
@stephenlavine9346
@stephenlavine9346 2 года назад
Thank you. Great video.
@brainpause
@brainpause 2 года назад
Great video. It also shows that the fancy camshaft tools aren't needed, like the 3 mechanics I've been to insist on having, forcing me to a dealer. Turns out the dealer is as cheap as those mechanics anyway on the estimates for all this. FYI, nearly all of them are around the $1300 range for timing belt, Idler Pulley, Tensioner, and water pump.
@rodritejedart
@rodritejedart 2 года назад
Great video thanks
@SantoshYadav-kk1uo
@SantoshYadav-kk1uo 3 года назад
Nice information
@gerardodonaire699
@gerardodonaire699 2 года назад
Awesome video 👌🤝
@hh7258
@hh7258 3 месяца назад
Just the video I was looking for. I’ll skip the locking tools on this one. I’m running out of space 😅
@franzkloft2231
@franzkloft2231 3 года назад
very helpfull
@mariogauthier1957
@mariogauthier1957 Год назад
nice job
@MakeItEasyMechanic
@MakeItEasyMechanic Год назад
Thanks!
@gosgraproperties8687
@gosgraproperties8687 2 года назад
Thanks!
@MakeItEasyMechanic
@MakeItEasyMechanic Год назад
Thank YOU!
@tallevi6172
@tallevi6172 3 года назад
Very nice! Good work, very professional. You need a smaller glove size though...😉
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
Haha thank you! bigger gloves are faster to take on and off in case I need to answer my phone etc. 📱
@quezadaestrada1104
@quezadaestrada1104 3 года назад
You're a very organized youtuber, I hope your channel grows. I just subscribed to you!
@7808y
@7808y 2 года назад
I have the cam locking tool and it seems to make it almost impossible to get the belt back on with no slack in between the cams, because they cannot move
@amiraux7234
@amiraux7234 2 года назад
احسنت شكرا
@TaKh-hx2ey
@TaKh-hx2ey 2 года назад
👏⁦👍🏿⁩⁦👍🏿⁩
@abdulrahman224466
@abdulrahman224466 Год назад
What are the signs and situations that need to be adjusted and changed?
@strategicservices9906
@strategicservices9906 2 месяца назад
This is above my limits; What should the cost be for water pump and timing belt cruze 2015 1.8 l parts and labor
@yippee72
@yippee72 Год назад
Do still spare bucket shim.thx
@ifeanyichukwuikwecheghe1363
@ifeanyichukwuikwecheghe1363 11 месяцев назад
Just A1! Are you also a teacher?
@jimmywarledo4930
@jimmywarledo4930 2 года назад
The phasers won't spring back on you after releasing tension?
@Tyani-sz6cg
@Tyani-sz6cg 2 года назад
How the world did you tighten down the harmonic balancer to spec?
@st165saj
@st165saj 3 года назад
Would you have a link where to purchase the chain wrench. What make and model is it. Thanks
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
Mine is a Rigid C-12, it is a little too small for some jobs, I would recommend getting a C-14 at least. I'll add a link in the description later this evening.
@ryangrider5153
@ryangrider5153 3 года назад
great video. Do you have one of doing the head gasket on the 1.8l? All the ones I see are for the 1.4l
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
I do not, not yet at least
@adangarcia5109
@adangarcia5109 3 года назад
Thanks thats a great video .. i change my timing belt , but my car won't start , what it could be ? My car stop runing on the street with time belt was damage from the teeths
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
Theres probably some valve damage. If the timing belt broke with the engine running - pistons could've hit the valves, which would cause a compression issue. Next step is check the compression in each cylinder.
@shabeerali1
@shabeerali1 Год назад
👍👍👍👏
@Tyani-sz6cg
@Tyani-sz6cg 2 года назад
Were those motor mount bolts not TTY, one time use?
@CleranceElva
@CleranceElva Год назад
I replaced the timing belt and oil cooler, now my engine in making a rattling noise. Any idea what it could be? I’m afraid that I did something wrong
@rickywhite1618
@rickywhite1618 2 года назад
The service team got popped on my 2014 Chevy Cruz I pulled up at the store shut the engine off got back in and it wouldn't stand it wouldn't start when I got home I noticed the Belt was shredded I put a new one And Will not run correctly Does anyone have any suggestions
@brandonpetrilla1731
@brandonpetrilla1731 2 года назад
How many miles were on this car when this service was done?
@JJstram84
@JJstram84 Год назад
About how long did all of this take you?
@flywire0
@flywire0 3 года назад
I don't have an impact wrench or crankcase locking tool. Can I use a screwdriver or something similar to lock the flywheel? Otherwise, I'll put it top gear with the handbrake on to remove the crankshaft balancer bolt.
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
If you can get to it with a screw driver, I dont see why not
@MikePalmer629
@MikePalmer629 3 года назад
Is it necessary to have it on top dead, or can you remove the belt without rotating the engine?
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
I've replaced timing belts before without setting the engine at TDC, just made sure cams and crank were in the exact same position as they were when I took the old belt off.
@nicolemhardin7000
@nicolemhardin7000 2 года назад
Where is he located
@shivendrasingh2862
@shivendrasingh2862 2 года назад
Hey, I was in other videos, they lock the flying wheel as well using a tool, is that important?
@MakeItEasyMechanic
@MakeItEasyMechanic 2 года назад
From the standpoint of torquing the crank pulley bolt properly - yes. But if you're just concerned about keeping it in time - no. There are timing marks to keep it in time.
@shivendrasingh2862
@shivendrasingh2862 2 года назад
@@MakeItEasyMechanic Thanks Mate
@hapiheart8370
@hapiheart8370 3 года назад
Hi where did u buy ur water pump?
@MakeItEasyMechanic
@MakeItEasyMechanic 3 года назад
The customer brought their own parts, I believe they bought it at advance auto parts
@jacefowler4081
@jacefowler4081 2 года назад
I would like to have known how long the job takes to do in general
@MakeItEasyMechanic
@MakeItEasyMechanic 2 года назад
3 hours or so
@jacefowler4081
@jacefowler4081 2 года назад
@@MakeItEasyMechanic Thank you very informative.
@kennethmills4891
@kennethmills4891 Год назад
I have a question I put a timing belt on my stepdaughters 214 Chevy Cruz 1.8 everything is lined up it is sitting a cold for the camshaft being at a time
@kennethmills4891
@kennethmills4891 Год назад
This is the best video I’ve seen
@kennethmills4891
@kennethmills4891 Год назад
It keeps saying code for the camshaft a
@garriga24
@garriga24 2 года назад
how much does this job cost?
@MakeItEasyMechanic
@MakeItEasyMechanic 2 года назад
At a repair facility - $600 give or take
Далее
5 signs of a worn timing belt | AUTODOC tips
6:49
Просмотров 91 тыс.
2014 Chevy Cruze 1.8 Timing Belt Replacement
23:17
Просмотров 97 тыс.
Chevy Sonic 1.8 Timing Belt How To
14:07
Просмотров 85 тыс.
Chevrolet Cruze Engine Rattle
9:30
Просмотров 56 тыс.
Brembo на Ладу Джетту
1:00
Просмотров 493 тыс.
Странный Ситроен Кларксона
0:56