One of the best videos I’ve seen on RU-vid tutorial for this make and model , I own a cooper 2019 model and The OEM pads are made of a very weak material, I only get around 10-15k miles out of the pads , that’s how bmw mini make their money 😂
Very nice video. Good lighting, well explained, your hands and arms weren't in the way, gave the specs. Etc... Can you do a 2nd video on the rear brakes?
Nice clear video no unnecessary waffle thanks. Mine is Cooper 2010 I have same issue with parts as it was built on changeover. Just a cpl of quick questions… did you use new Caliper bracket bolts and/ or guide pin bolts? My Haynes manual says to and it cost me 40 GBP for 8 Caliper bracket bolts! I was thinking of putting lo title on the old guide pin bolts and reusing them, I have done that many times over the tears on different cars.
Great question, No, I didn't get new caliper bracket bolts. I put the old ones back in and had no troubles at all. Thanks for watching! -Dan the Fix it Man
Hi Leonel, The master cylinder is just underneath the master cylinder reservoir (where you add the brake fluid.) I sometimes refer to the reservoir as the master cylinder because it's usually right on top of it, or attached to the top of the master cylinder. Thanks for watching! -Dan the Fix it Man
It's probably very similar to the 2019, but I would make sure you get the correct specs etc. for that year and model. Best of luck to you. Thanks for watching! -Dan the Fix it Man
