2015+ Ford F150 Console Swap

Подписаться 7 тыс.

Просмотров 104 тыс.

50% 1

From Seat to Storage 13th generation F150 Center Console Swap
We ripped out the jump seat and swapped in the full storage console
Parts list:
FL3Z-15046B32-BA- radio trim piece
FL3Z-1504338-DC- right side trim piece (armour)
GL3Z-1504339-FC- left side trim piece (armour)
FL3Z-1504567-DA- cup holder (replaces your console shifter)
FL3Z-15672A40-AD- Left Center Console Floor Plug (black)
FL3Z-15672A40-BB- Right Center Console Floor Plug (black)
4- M6-1.0 x 25 bolts (Home depot part number 562 237)
4- washers for bolts
F150 Mod list:
Moto fab front 2.5"
amzn.to/2SjdNVj
Readylift 3"
amzn.to/2ENEKrY
Grill: (price seems to have gone up since our purchase)
Black: amzn.to/2tCVX5B
Grey: amzn.to/30EZhZW
Bestplus tow mirrors:
amzn.to/2luYevv
3D Maxpider floor mats:
amzn.to/2I0Hx3g
DeeZee tailgate assist:
amzn.to/308l76l
BuiltRight Industries rear seat release:
amzn.to/2LsjYCx
15-19 brake controller:
amzn.to/2LzgvlK
Uriah Hitch
amzn.to/37t366f
Support us and get cool merch!:
teespring.com/stores/out-of-l...
#outoflinegarage #F150
BECOME PART OF THE CREW!!
YT SUBSCRIBE → bit.ly/2t4dUGx
FACEBOOK → / outoflinegarage
TWITTER → / outoflinegarage
INSTAGRAM → / outoflinegarage
AP's info:
/ antbug911
ru-vid.com/show-UCu8V...
----------------------------------------
What do we use????
----------------------------------------
Out of Line Garages tech info:
Panasonic Lumix G7 4k camera:
Just the camera:
amzn.to/2LMlqyC
Starter Bundle:
amzn.to/30ccEiv
Canon G7x Markii:
amzn.to/2LFSesx
ZHIYUM Smooth-Q gimbal:
amzn.to/2Sq4H65
GoPro Hero 5:
amzn.to/2Vl2zyq
GoPro Session:
amzn.to/2CJGMt7
Canon 60D:
amzn.to/2GLFFx2
Rode VideoMic with Fuzzy Windjammer Kit:
amzn.to/2Rxfs9T
Ravelli AVTP Professional 75mm Video Camera Tripod with Fluid Drag Head:
amzn.to/2CITyIk
Blue Snowball Ice Mic:
amzn.to/2BQaBqh
DISCLAIMER: This video and description do contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help supports the channel and allows us to continue to make videos like this. Thank you for your support!
SECONDARY DISCLAIMER: The views and opinions of products and installations are our own, we are not professional mechanics and therefore are not the final authority on these subjects. We are merely hobbyists showing what we do for fun.

Авто/Мото

Опубликовано:

25 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@stylesbitchly9931 8 месяцев назад

I edited my comment. I was finally able to get the part needed. Installed the console this past weekend. Happy with the end result. Thank you for the video.

@ivorysmithii8505 Год назад

I switch out my jump seat in my 2019 xlt. Your video made me know it was possible and gave me the confidence to know i can do it. Thanks for the parts list. I got my console from ebay.

@DouglasKGoff 4 года назад

You are doing the Lords work!! :) Thank you for the detailed tutorial.

@johnp6978 7 месяцев назад

Just got all my parts. Looking forward to doing it this weekend. Your video was very helpful. Thank you.

@christianlongoria2948 3 месяца назад

Where did you pick your center console up from?

@Rjbalver 2 месяца назад

Awesome video man! So comprehensive. Thanks for the help, just installed my center console

@bradkuether3561 3 года назад

Bravo. I have that already installed in my 2017 STX, but very insightful on how the swap is done, and do appreciate you removing the shifter.

@natemaggard7313 Год назад

where did u buy the console at?

@motomizfit2892 3 года назад

Love the demolitia shirt! I have the same one lol and thanks for the detailed video! I’m looking to do my 2018 xl.

@lastdays4278 4 месяца назад

Best video yet! Thanks budd, God bless you and your family

@dalewilliams7484 3 года назад

Thank you man. You're video was alot of help. Ive swapped to black leather and now wanting ditching my jumper on my 15 super crew.

@rdd014r 3 года назад

Just got my center console and currently getting all the other little parts together. Thanks for showing all the part numbers. Makes this much easier!

@tommylindsey2924 Год назад

Where did you purchase everything ?

@carlotodaro5052 11 месяцев назад

wow you made that look so easy, nice job

@matrafa Год назад

After seeing this vid, I got an f150 with steering column shifter with this swap in mind. I was able to do this with only removing front passenger seat bolts and tilting it out of the way- didn’t want to disconnect the airbag cable underneath. The console I used was taken from a XLT without push start, so we needed to remove the remote antenna located under my jump seat and hook it up into the console wiring. Without the remote antenna hooked up, my truck wound not detect the key.

@coloradorenegade 2 года назад

You did great, I cant wait to do this to my f150, instead of showing a how to i will simply show the finished product and link to you.

@Rdavid2590 14 дней назад

Great informational video. Thanks

@nathanwilson7078 2 года назад

Great Video Man! This helped a lot!

@xXx_Mason_xXx 3 месяца назад

awesome video now i have to track a center console down to put into my 2016

@eskii1746 3 года назад

FINALLY I FOUND A VIDEO!!! Thank you

@HTFU-zq3vu 2 года назад

Great video very detailed 👌🏻

@markallen9389 4 года назад

Great video!

@selvelan9786 3 года назад

Thank you for the video... im savingg it until i do this

@zacharybrown3023 2 года назад

Very helpful thank you!

@brianmcelhone275 4 месяца назад

Thank you!

@johndale9578 Год назад

Wow this is awesome!

@arlindlubishtani7466 3 месяца назад

Bro thankyou for this amazing video , i never worked in cars but after watching your video i feel pretty comfy doing, i just need the pice to replace the shifter i don’t know where to find ! i definitely subscribe your chanel Thankyou Again.

@limitlessautomedia9794 2 года назад

It would have been awesome if you would have converted to center shift. I'm looking to give it a try in a few months. Just going to buy parts here and there.

@jacobmarcuson2214 Год назад

I love the demo-ranch shirt

@francoporro5011 Год назад

Great video. Did you consider adding ductwork for rear ventilation? Big complaint with third front seat

@paulkelly1702 3 года назад

My 2015 with console had 207,000 miles on it and I decided to change it for a 2018 with FAR fewer miles. The 2018 has the jump seat and I do not like it. Glad I found this video so I can now go find a console and find someone to do the swap. I am a very handy individual but tearing my truck apart and getting it put back together properly I do not have much confidence in. Thank you for the video.

@paulkelly1702 2 года назад

Update! The coworker that bought my old truck wants the middle seat and not the console, so we are going to swap them over. Yea!

@Victorbanda1234 3 года назад

If my truck has the inverter will the rear 12 volt work? or will i still have to hook something up?

@BRANDONTALONSKY 2 года назад

When you took the shifter out did you remove those 4 retaining clips by chance? I need those and cannot find a part number

@minecrafter4623 4 месяца назад

I love my 2015 F150 has everything I wanted for first nice truck. I just don’t need a middle seat and like the console so much better. I do have a power converter in the back so wonder if this would work out.

@gmanjeep1 2 года назад

Hello I just got my center console and I'm going through videos see how it's done and I came across your video. And I didn't realize you have to change a lot of parts. And I was wondering where did you find the parts you needed I see the bolts and washers you got like at Home Depot. Thanks

@coletruitt4666 2 года назад

I’m confused as what to put in the “option” spot on the LKQ online website obviously you put your year of f150 , interior , dash and console parts, console and then under option what did you put? Is it “floor , (full console with lid),column shift” and even when I do that I’m hesitant to buy because it doesn’t really show me pics of what the console I’m getting looks like. If you could help me out that’d be great.

@vicentebchacon 2 года назад

Excellent..! Will that version of the console be compatible with a 2011 Ford F-150 Fx4?

@greenbulldog30 Год назад

Did you ever wire in the ambient lighting or USB ports for the center console?

@SilvioAlcantara 3 года назад

Excellent video, question, did that key slot underneath the sync compartment ( it's used to program new keys) did that work after this swap?

@OutOfLineGarage 3 года назад

Silvio Alcantara never checked, but I doubt it will.

@diegogarcia-mr3wq 3 года назад

How did you look it up under console under the option section?

@fjuanfiddy4593 3 года назад

How did you find it? When I search it up as console the most expensive one I get is 164.00 and the cheapest I get is 65.00. Howd you know which one was the right one?

@NewChristendom 2 года назад

Hey, I bought the parts I need, I think, but i have a problem. The console was a center shift so I ordered the cup holder and dump pocket replacement. However, now I cannot get the exterior frame to snap back into place on top of it. You didn’t show the installation of that piece. How did you do it? Did you have problems? Literally nobody is out there to help with things like this.

@Recoil816 3 года назад

Just took a gamble and bought one from a wrecked truck off eBay. Picture sucked, but it looks like it is fine, and it's just the column shifter model I need too, so that saves $200 for that damn trim piece (which is absolutely ridiculous).

@jbzkid76 3 года назад

Awesome video!! One question...where are you ordering the extra trim parts from?

@OutOfLineGarage 3 года назад

jbzkid76 friend of mine is a parts manager for a local dealership so I ordered everything slightly above cost. Tasca seems to be one of the cheaper options check with your local ford dealer.

@angelcangas4653 3 года назад

Where did you find the cup holder I cannot find it with that part number anywhere is it possible that you can put a link on the comment

@Arcqus50 2 года назад

For my 2015 cl I don’t have the button seats I have the bar and lever. Can I upgrade these seats

@cowboys5223 Год назад

Can I add this center console to a 2006 Ford F150 XLT 5.4L Triton. Extended Cab? Thanks for the video

@jakairocampusano1181 Год назад

i have a question... how much did the cup holder costs you.. i went to the dealer and they threw a $300 price tag my way.. that cant be right.

@kylelearn7839 2 года назад

Any update on the ac? And how that is supposed to hook up?

@Just_A_Gamer_Dood Месяц назад

Would this work for a crew cab or would the center console be too long?

@RodrigoHernandez-uk7el 8 месяцев назад

Hello, my truck is a f150 supercab 2016, do you know if any console 2015+ will fit?

@francis5944 3 года назад

Do u do this for a living? I want to remove the ugly seat and install a center console. Where can i buyone?

@daryn86 2 года назад

My gf seems to like the bench seat. 😎

@wes1424 3 года назад

I couldn't believe how pricey the cup holder was, just did my install earlier this week. Did you sell your jump seat and other parts?

@wes1424 3 года назад

@B N. Got it off of Car-Part.com no s on part, has yards all over country to pick from. Paid $300 and it was complete

@davidrickey3776 Месяц назад

Did you figure out how to get air to the rear. If not I did and I’d be happy to share how I did it

@justinduff1792 3 года назад

Awesome video. I did the same swap myself prior to watching your video and didn’t plug in the USB first like a dumbass. Do I have to take everything apart again or is there a simpler way to access the wire?

@OutOfLineGarage 3 года назад

You might be able to pop the radio out and plug it in that way

@chrisgrantham2341 2 месяца назад

where did you find GL3Z-1504339-FC ? do you remember where you got it, having trouble finding one

@b1gje55e 3 года назад

Would this work for a 2018 F150?

@AndersonConstructionTeam 10 месяцев назад

Hey outofline, watched this whole video it’s amazing! Do you think this process would be comparable to putting an f250 console in an f250 with a jump seat? Thanks!

@OutOfLineGarage 10 месяцев назад

The consoles are exactly the same so it would be the same process.

@dontask8979 3 года назад

Nice shirt

@alexperez4096 3 года назад

What if i have a linkswell 12" screen ?? Will it fit fit same way ? Also console did not came with shifter but it has missing bottom part so there's nothing. Can i put some sort of plastic or something ??

@wnitro679 2 месяца назад

We're you able to make it work or did it just not require any extra pieces

@jasongarcia3943 3 года назад

Is there any way to get the automatic shifter on the console to work if you have the shifter on the steering wheel?

@OutOfLineGarage 3 года назад

Yes but it requires some work, and an extra harness I believe. I looked into doing it but I like having the extra room in the console rather than the shifter.

@gamertothemax1834 27 дней назад

Well i did this and my ports in the rear don't work with everything plugged in

@maxwarner4888 Год назад

when you do the ambient lighting plz make a vid!!

@ayleslove4710 Год назад

If you are handy I did this swap without ordering any special parts.... I used a jigsaw to cut out the Trim bezels, then wrapped them. I also believe you can just plug the side wire harness in and evrything should work without switching over the USB seperate. Ford parts are not cheap, and this can save $100's of dollars. For under $100 you can purchase the two vent attatchments and simply push together to get rear seat ventilation working, I didnt need this as back seat is subwoofers only.

@jeremyolday1281 Год назад

Do you have part numbers? If I'm going to go through the trouble of doing the swap I'd love air in the back seats.

@davidscherrle7908 Год назад

Do you have a picture? I’m curious how it looks after using a saw. I’m thinking about doing the same thing, but concerned it might look bad.

@ayleslove4710 Год назад

@@davidscherrle7908 Is there a way to send or post photos? It came out pretty clean, could also use a dremel I imagine. I could probably send a rough template but I just taped the lines and went slow with jigsaw.

@ayleslove4710 Год назад

@@jeremyolday1281 I believe all the part numbers are listed in the description. Pretty easy swap for the most part, I removed passenger seat and it gave me all the room to move things in and out. Basically plugs right up.

@ayleslove4710 Год назад

I also bought a piece of black acrylic and epoxied it from underneat the console where the shifter use to be, I then ran some switches to it.

@Wheelpros210 4 месяца назад

Where did you get the cup holder for it?

@joshweightwoodworks 3 года назад

Did you ever find that little center rubber piece next to the cup holders? I just did the same swap and I can’t find that piece

@OutOfLineGarage 3 года назад

Never looked actually. Guess it doesn’t bother me that much. Haha

@wes1424 3 года назад

Can order from Ford

@joshweightwoodworks 3 года назад

@@wes1424 did you find one? I tried ordering it and the dealer responded saying they are discontinued.

@natemaggard7313 2 года назад

How do I buy the console. Where did you get it?

@christianlemus6483 3 года назад

I wonder if u can put a super duty one in that doesn’t have the shifter built in into a f150 since there the same cabs?

@OutOfLineGarage 3 года назад

You can do that, I looked into swapping the F150 bins to the F250 sliders but the piece I needed was over $200 so I just traded a guy the shifter for the right bin.

@christianlemus6483 3 года назад

@@OutOfLineGarage I like my bench seat but that console does look good👍more storage is always a plus thanks for the video upload and info

@joehochberg3079 4 года назад

I can't find a part number for the 2 small pieces pictured on the front corner of table @5:31

@OutOfLineGarage 4 года назад

I added them in the description for you. :)

@joehochberg3079 4 года назад

@@OutOfLineGarage thanks, found them.....now, without destroying the cable, how is it removed from transmission end? lol

@scribbly1160 Год назад

Quick question, does it have to be a center console from a xlt or can it be from a lariat ?

@OutOfLineGarage Год назад

It can be from whatever trim, just need to make sure the colors match.

@reflectivetn8819 3 года назад

where did you find the insert that replaced your shifter?

@wes1424 3 года назад

Ford dealer , sticker shock, priciest piece other than console itself. Got mine through a friends body shop saved a couple bucks but not much.

@jacksonmiller7893 2 года назад

I’m begging someone to tell me how to do this, what if I want to have the hand shifter instead of the column? What do I have to do? Thank you!

@deland1360 2 года назад

You have to do some wiring and get a new cable. F150 forum has step by step directions.

@JamesBond-5.7 2 года назад

👍👍👍

@stephenayala7621 3 года назад

Is the shifter useable if you leave it on there or is it useless?

@lucada8538 3 года назад

It's obviously useless, unless you take the time and remove the transmission cable from your column shifter and reattach it to the floor shifter

@DerekandCourtney 2 года назад

Where did you find the trim bezel pieces at and how much?

@OutOfLineGarage 2 года назад

Part numbers are in the description. I ordered it though a local ford dealer and I don’t remember it was 2 years ago lol

@jeremylee447 3 года назад

This may have been asked and answered, but did anyone have to purchase new mounting brackets to secure the console?

@OutOfLineGarage 3 года назад

Nope. Same bracket works for the jump seat or console. Everything you need is listed in the description.

@jeremylee447 3 года назад

Thank you!

@mustangspartan Год назад

My main thing is I still want the center shifter

@ryanelkins8081 3 года назад

Would it also work for a single cab? Not worried about the back ac vent or outlets

@OutOfLineGarage 3 года назад

Yes, should be all the same. I’ve seen ppl do it.

@ryanelkins8081 3 года назад

@@OutOfLineGarage the radio trim, do they offer it with out the 4x4 knob and trailer assist

@OutOfLineGarage 3 года назад

@@ryanelkins8081 yes but I don’t know what the part numbers are. I know my truck didn’t have the brake controller (we added that and did a video on how to install and program it) and it had a tray where the controller was. Not sure about the backup assist though.

@angelcangas4653 3 года назад

You could have just connected it to the cigarette lighter or the extra outlet for the cigarette lighter that you had

@Victorbanda1234 3 года назад

Do you happen to know if I have the inverter if it will all plug and play?

@OutOfLineGarage 3 года назад

Not sure

@KelliKlassen 10 месяцев назад

yes it will. everything except the 2 ambient lights will work with no Mods

@jaredf.8712 Год назад

2 years ago you got this for around $250. They’re $1,200-1,500 or even 1,800 on eBay 🤦🏻‍♂️

@minecrafter4623 4 месяца назад

For real, might just make sure next truck has a center console. Not sure if it’s worth all the money and hassle haha

@ivorysmithii8505 4 месяца назад

Haven't checked in a while but mine definitely wasn't $250 and nowhere near $1000. Got mine off ebay for $570ish after taxes. And that was leas than a year ago

@One_Branch_At_a_Time 3 месяца назад

Just bought one for $350 on eBay. Got lucky af because I also got free shipping😂

@bigeasy2187 Год назад

why do you have to get new bolts. why cant you use the ones that were holding the jump seat in

@KelliKlassen 10 месяцев назад

different mounting points for the console and jump seat. Smaller bolts

@kpiperjr 4 года назад

Thanks to this video, I bit the bullet and purchased a console and made the swap. Then, to my surprise, the truck wouldn't start. It has the push-button start and kept saying "Key not detected." I tried putting the key fob in the emergency slot, but that didn't work. I took out the console and put the jump seat back in and it started right up. There's apparently some connection that isn't on the 2017 console that I'm putting in my 2019 truck. I can't find ANYTHING about this on the web. Anyone got any ideas?

@OutOfLineGarage 4 года назад

Hmmm, wish I could look through it. Any codes coming up? Don't see any thing under the seat that might be able to cause the issue?

@kpiperjr 4 года назад

@@OutOfLineGarage Nope, no codes. Would disconnecting the battery reset the computer, maybe? Do you know if there is any programming in the key detector? Oh, there is one plug near the front of the console that had no matching connection in the dash. I guess I can't attach a picture here, but it has two wires going into the connector, gold and light blue. ***UPDATE*** I believe the plug is the C235 PATS antenna, which must be built in to the 2019 main floor plug. I just need to find a wire diagram of the 2019 plug to see if I'm right.

@OutOfLineGarage 4 года назад

Hmm, yea that's probably it. Might be able to pull it out of the seat?

@limitlessautomedia9794 2 года назад

Did you want to sell that 2017 console?

@YoungStrokerr 2 года назад

What is that console called?

@scottheintz57 3 года назад

Do you have a parts list for the dash parts?

@OutOfLineGarage 3 года назад

Everything you need is in the description part number wise

@FloppyRunner 2 года назад

Any chance you still have your seat lying around? I'd like to swap from console to seat...

@deland1360 2 года назад

I plan on doing this in a few months will have the jump seat. In central florida

@fastalon2932 2 года назад

center seat in TX

@fastalon2932 2 года назад

will trade for console

@DavidBradyTSP 2 года назад

You ever figure out the air flow through the console?

@OutOfLineGarage 2 года назад

Never really bothered, I rarely have people it in the back seat so it’s kinda pointless for me tbh.

@zeusm8498 4 года назад

You don't have to pull the carpet up to run the AC it's actually really easy just get the parts it's worth doing it my kids love it

@ericksonlopez9658 4 года назад

Can you give me a link or part numbers for the required parts to run AC to the back

@parkerrogers2277 3 года назад

@@ericksonlopez9658 www.f150forum.com/f118/center-console-swap-details-352699/ See the parts picture in the forum. Part 18C420B extends console duct to 90 degree bend Part 18C420C. Someone correct me if I'm wrong but I believe this part is what connects to the blower. Reading the forum, you may have to use a utility knife to cut out an opening in the blower housing. Once the hole is cut, Part 18C420C goes over the hole to receive the air. Edit: Ford Part No. FL3Z-18C420-C or Base No. 18C420C

@limitlessautomedia9794 2 года назад

I remember there being this one website where you can buy parts from vehicles starting with car.... I can't remember the websites name!!!!

@joeyg.2953 11 месяцев назад

All in all, how much did the project cost and how long did it take?

@ivorysmithii8505 4 месяца назад

Price and time will vary. When I did it 9 months ago. I paid $570 after taxes for the console from ebay and about an extra $100 for trim pieces and hardware. Took me about an hour and a half to 2 hours by myself to do it.

@mattcastro576 3 месяца назад

@@ivorysmithii8505if you could get me all the trim pieces for $100 let me know every where I’m looking the trim parts are well over 100

@1194video 3 месяца назад

Think this is what I’ll do on my Lightning and remove my center seat

@cesarvazquezarias3508 2 года назад

Can you tell us, how much do the console swap cost?

@owenf777 Год назад

$250

@_Judson 4 года назад

should’ve kept the shift knob

@OutOfLineGarage 4 года назад

I like the extra storage and someone was already to swap with me.

@francisshannon9045 2 года назад

Any reason this wouldn't work on a regular cab?

@OutOfLineGarage 2 года назад

Nope, I’ve seen people do the swap in a reg cab before actually.

@francisshannon9045 2 года назад

@@OutOfLineGarage is it the same on a 2020?

@OutOfLineGarage 2 года назад

@@francisshannon9045 yup

@ethansewell4858 3 года назад

Hey man do you still have all the old parts? I have a center console but I want a middle seat, so ima swap mine but reverse what you did and can’t find the parts if you’re trying to sell!

@marvineid3085 3 года назад

I have the jumper seat and looking to swap. How difficult would that be to make happen?

@OutOfLineGarage 3 года назад

I sold mine a while ago. Post up on the F150 groups on Facebook and I’m sure someone will swap with you.

@wes1424 3 года назад

@@marvineid3085 Where you last week when I was looking for my console, I'm in western Pa. want to sell mine, new black seat bottom, gray storage back, along with all dash pieces needed.

@wes1424 3 года назад

sent reply to Marvin below, where you located

@rileykeith5935 3 года назад

Ethan, are you still looking to swap? im looking for a console, and have the middle seat.

@127Connor_ 2 года назад

Would this console fit on an extended cab?

@OutOfLineGarage 2 года назад

Yup!

@127Connor_ 2 года назад

@@OutOfLineGarage good to hear,now I just need to find one!

@Walrydc 4 года назад

Link to console? Havent found any in that condition for that price...

@OutOfLineGarage 4 года назад

just check www.lkqonline.com/ regularly. the prices are kinda all over the place tbh.

@mikesodano2089 3 года назад

On the site when you choose console is that the price for the entire thing or only part of it?

@OutOfLineGarage 3 года назад

Mike Sodano mine came with most of what I needed besides the pieces I had to purchase.

@ericksonlopez9658 4 года назад

Does anyone know the parts needed to let airflow to the back?

@htowntx-hr3hb 4 года назад

I have a full working center console along with A/C from factory and let me tell you that shit sucks. Even on full blast it barely blows. My cab gets cold enough with just the vents in the front. Save your money bro. You’ll be very disappointed if you dont. Trust me.

@OutOfLineGarage 4 года назад

@@htowntx-hr3hb yea I have the pieces to finish mine but that is one of the reasons i just left it be. Being in FL i like having that ac blow full blast in my face during the summer months.