Тёмный

2016-18 Audi Q5 3.0T (P164E00) Issue + Fix!!!! Bad Variable Valve Timing Solenoid 

Foreign Werks
Подписаться 2,6 тыс.
Просмотров 1,2 тыс.
50% 1

Welcome back to another episode of. In this episode we find a solution to the P164E00 code! I will list all the tools below and part numbers as well. Let's get this repair done! Note: the code went away after we reset the ecu and has not been back!
Audi P164E00
Audi Q5 VVT
3.0T Audi VVT
Oil Pressure regulation Valve
Audi oil pressure valve.
Audi Q5 3.0 oil pressure valve.
Parts:
www.fcpeuro.co...
Tool:
10mm socket (To remove heat shield bolts)
T-27 Star Bit socket 1/4
Wobble adapter socket. 1/4
Adapter socket 1/4 to 3/8
Two long 3/8 extensions.
Magnetic tool pick-up (optional)
Locking Pliers (To pull on the sensor, it is stuck in there)
Email: Foreignwerks15@gmail.com
Disclaimer:
Due to factors beyond the control of Foreign Werks, I cannot guarantee against improper use or unauthorized modifications of this information. Foreign Werks assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information AT YOUR OWN RISK. Foreign Werks recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Foreign Werks, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Foreign Werks!

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@eddycervantes2979
@eddycervantes2979 2 месяца назад
Awesome job ! I'm dealing with the same problem at the moment.
@genuineimpulse9134
@genuineimpulse9134 Месяц назад
OMG what a night mare. I don't have that code and am intimidated by just changing the plugs and coils. My wife is ready to trash this car and start over. 2010 Audi, Q5 3.2 V-6, not turbo, with only 135K miles. I'm hoping it will drive better with new plugs and coils but geeze. I've got much larger hands, and there's no way I'd be able to get that sensor in below.
@Fwerks.1592
@Fwerks.1592 Месяц назад
@@genuineimpulse9134 I just did a 3.2 v6 not so long ago. It’s not that bad the coolant reservoir you will have to unbolt and just move it to the side . But it made a difference for sure he had 156k and had not changed any plugs since 2017. That puppy was idling smooth engine was super healthy as well! But going back to this 3.0T yeah! It was a tight spot specially if anyone has lumberjack forearms lol.
@genuineimpulse9134
@genuineimpulse9134 Месяц назад
@@Fwerks.1592 I got it done and only a little blood, lots of sweat, no tears,. We bought the car in 2017 with 77K, who knows when they were done last but from my untrained eye they looked worn out, all as low as your #6. The PITA middle on right side wasn't tightly in place and covered with oil. New plugs and coils and I couldn't believe how much better it sounded! Almost sports car like roar. Thanks for your videos it was a huge help seeing how to do it without taking off the shroud. I hope I'm done for a while but...with three cars, the newest 2010, you know how that goes.
@Fwerks.1592
@Fwerks.1592 Месяц назад
@@genuineimpulse9134 that’s awesome!!! That puppy should be good for another 60k before another things pops up! I’ll try to upload more videos on this Q5 for maintenance. Not to mention how much money you saved paying a shop! Yeah man if it’s not one car it’s the other and the list goes on! Life’s short lol let’s enjoy the moments!
@Abdul12219
@Abdul12219 Месяц назад
Hey men I got a c250 2013 and I have issues with the car the seats doesn’t move the screen is black the sunroof doesn’t open the inside lights don’t work is there anyway you can help me out it will be great thanks
@Fwerks.1592
@Fwerks.1592 Месяц назад
@@Abdul12219 have you checked all the fuses? You need a good scanner to check the front and rear Sam modules. It’s hard to say what’s the main issue. Sounds like you have a bad module and it’s causing all these items. I would suggest getting the car scanned. That’s where I would start.
@Abdul12219
@Abdul12219 Месяц назад
@@Fwerks.1592 where’s the module at I took it to Benz the say it will cost like 3k I was like no
@Fwerks.1592
@Fwerks.1592 Месяц назад
@@Abdul12219 the front fuse box is one of the Sams, the second one is located under the passenger side front seat. It’s under the carpeting I believe so. The third rear Sam box is located in the trunk . I would inspect every single fuse, the box it’s self and check for any corrosion or wiring issues.
@Fwerks.1592
@Fwerks.1592 Месяц назад
Also one thing to remember when replacing the entire Sam/ fuse box they need to be coded!
@Abdul12219
@Abdul12219 Месяц назад
@@Fwerks.1592 ohh damn I’m looking for someone to fix it but I can’t find anyone
Далее
Audi 4.0T Spark Plug Change
18:08
Просмотров 747