Тёмный

Check Engine Code P0011, Rough Running Engine? How to Diagnose VVT Solenoids! 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,4 млн
Просмотров 267 тыс.
50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/220/ac/variable-valv...
Do you have a check engine code P0011? Does the engine in your car or truck feel rough, maybe it's misfiring? In this video, Sue takes you through the steps of identifying and diagnosing a timing problem caused by a faulty VVT solenoid. Trouble code P0011 indicates that the camshaft is advanced further than the computer expects it to be. While that could indicate problems with the cam shafts, gears, or timing belts or chains, with modern vehicles, the variable valve timing solenoid is often to blame. The VVT solenoid is a valve that is controlled by the engine computer. It has oil passages that open and close to advance and de-advance timing of the engine. Dirty oil can clog up these passages, and interfere with the valve.
For more great diagnosics like this, check out our playlist!
• Driveway Diagnostics!
Subscribe to 1A Auto:
/ @1aauto
Chapters:
0:00 Check Engine Code P0011 Camshaft Position Over Advanced? How to Diagnose VVT Solenoids!
0:20 P0011 - Camshaft Position Over Advanced - What Causes It?
1:47 Locate the VVT Solenoids
3:46 Ensure Proper Oil Level
6:00 Search for Oil Leaks or Burning
8:20 Run the Engine and Pull Codes
9:48 Electrical Diagnostic
13:13 Remove VVT Solenoids
14:50 Bench Test Comparison Old VVT Solenoid vs New VVT Solenoid
18:14 Install New VVT Solenoid
21:44 Do an Oil Change! Road Test
22:10 SUBSCRIBE! | Shop 1AAuto.com Link Below!
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
For More Info visit us at 1aau.to/h/cVg/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

8 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 139   
@1AAuto
@1AAuto 2 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@derekterrell3465
@derekterrell3465 2 года назад
Thank you vary informative bless you keep up the good work
@thomasbox4762
@thomasbox4762 2 года назад
New big changes no New Breed changes
@thomasbox4762
@thomasbox4762 2 года назад
N u be bed changes
@MySpace662
@MySpace662 Год назад
This woman is a well experienced mechanic, she can make any engine sing in harmony.
@maxberry4244
@maxberry4244 Год назад
Not gonna lie, this is probably the most detailed 'how to' video I've ever watched. I realised quite quickly that this didn't relate to my issue, and I still finished the whole thing 🤣
@callmej3671
@callmej3671 2 года назад
“Pretty excited about a misfire” 😊 So glad you love your job and make videos like this for us…
@elab8461
@elab8461 2 года назад
If i ever need someone to fix my car, you will be the first one I call. 👍👍
@dennisking1555
@dennisking1555 2 года назад
Your videos helped me sort my cambelt, saved my engine, thank you
@cairomoorman798
@cairomoorman798 Месяц назад
An amazingly detailed instructor I hope there are more videos lead by her because she is fantastic
@reynaldoclaveria100
@reynaldoclaveria100 Год назад
Your video is the best demonstration about vvt solenoid testing. Thank you very much may jehovah god bless you.
@wendel6
@wendel6 2 года назад
Just love your thorough explanation!
@mvernon1979
@mvernon1979 Год назад
Excellent vid and your mechanic did a great job explaining the process.
@Clamlifenc
@Clamlifenc 2 года назад
Very details and great diagnostic. This video so far are the best I’ve seen. I wish you live in my city, I’ll definitely use your service. Thank you
@keithp115
@keithp115 2 года назад
Love your enthusiasm and expertise!
@allenyoung4005
@allenyoung4005 8 месяцев назад
I loved watching someone who LOVES their work....she really does!!!!
@Life-ch8rj
@Life-ch8rj 2 года назад
Good diagnostic tech!! Knowing is half the battle.
@rbrown3164
@rbrown3164 2 года назад
Great, great video. You are a great teacher and technician.
@evanm9026
@evanm9026 2 месяца назад
👏🏼 by far the best diagnostic video. Very focused. Easy to follow w great info.
@martinmonfee7974
@martinmonfee7974 Месяц назад
I am beyond just impressed, I agree with others comments, this lady is by far the best mechanic and teacher ever! (Sure wish she lived in our area)
@johnl9135
@johnl9135 2 года назад
Learned something new everytime thank you.
@briancasady66
@briancasady66 2 года назад
Excellent and informative
@elab8461
@elab8461 2 года назад
This is one of my favorite RU-vid video. Very informative 👍👍👍👍
@1AAuto
@1AAuto 2 года назад
+E Lab Thanks for the feedback!
@carlosaguilar4172
@carlosaguilar4172 2 года назад
Exellent diagnostic , Saludos desde Dallas, tx 👏👏👏👏👏
@t-tokyo9107
@t-tokyo9107 2 года назад
This video is perfect timing, my car has been burning oil (oil loss with black smoke). Now I know what my next steps should be. Thanks 👍
@johnnyblue4799
@johnnyblue4799 2 года назад
black smoke means too much fuel... burning oil is blue smoke. One smells like unburned fuel and the other one like burnt oil. Either way, not a VVT solenoid.
@fixinit
@fixinit 2 года назад
Good video. Thanks!
@katrinawedemeyer8430
@katrinawedemeyer8430 2 года назад
I was happy to see a woman doing this video!! You explained things really well. Just wanted to send you a high five!! You go girl!! Katrina
@jontaysdad09
@jontaysdad09 2 года назад
Love it😁we need more of her
@sandrarichardson2713
@sandrarichardson2713 Год назад
Your personality and your method of presentation make it easy to watch. Thank you for all the information you gave on the topic. I started changing these this morning on an '06 F150 5.4l 3v Triton. The vct's are down in a hole with a small bolt holding them in and a rubber seal on top. The passenger side went ok. But the driver side little bolt is screwed in so tight it's ridiculous. Maybe a guy could break it loose but it is almost like it was put in with an impact wrench. So my question is...how can I break this little bolt loose without messing up something? Thanks for your help...whoever answers. Jesus bless.
@ffffest
@ffffest 2 года назад
Lady, you are the best!
@flycorvus
@flycorvus 2 года назад
Hi, Sue! Nice to see you again. :-) Take care and have a great weekend!
@PaulHenreid
@PaulHenreid 3 месяца назад
Excellent detailed testing at 12:30. I have a pesky P0011 on 2007 Nissan Xterra 6 speed manual 112k miles. I do not want to bust open the timing cover and do a timing job if not needed so that test will help determine if the problem is with the cam phaser. Thank you
@1AAuto
@1AAuto 3 месяца назад
+@PaulHenreid Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@Grauditt
@Grauditt Год назад
Quick question - when completed and the codes have been reset, wouldn't you need to do a Vanos adaptation reset to ensure the values are within tolerance? Great video by the way!
@derekcasanares4785
@derekcasanares4785 2 года назад
Excellent topic 👍
@taddeojudemugagga2306
@taddeojudemugagga2306 2 года назад
Great job , thank you
@robertcofresi8199
@robertcofresi8199 2 года назад
Thanks for the Great advices love the way you Teach BLESSINGS TO YOU AND YOUR LOVE ONE'S AMEN 🙏
@juanubinasjr6739
@juanubinasjr6739 2 года назад
Great job!
@dennisclapp7527
@dennisclapp7527 2 года назад
Great explanation! Thanks you.
@1AAuto
@1AAuto 2 года назад
+Dennis Clapp Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@wannabetrucker7475
@wannabetrucker7475 2 года назад
This was very interesting 👍🏼👍🏼👍🏼
@rodneyhope3951
@rodneyhope3951 Год назад
Very good communication given, I love et, proper instructions, on subject matter at hand, 😊 👍 good job.
@MariaGonzalez-ei1pv
@MariaGonzalez-ei1pv Год назад
Excellent video ,well explain 👏bravo 👏
@nickd.7267
@nickd.7267 2 года назад
Makes sense. I've seen VVT screw up and over time causing the PCV to stick and blojob oil out of the engine.
@latincajun80
@latincajun80 2 года назад
Awesome video
@uniteentierly2773
@uniteentierly2773 11 месяцев назад
You made this helpful post understandable. Thanks Sue.
@1AAuto
@1AAuto 11 месяцев назад
+unite entierly Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@PRO4XKEV
@PRO4XKEV 2 года назад
Great info.
@timmyle2465
@timmyle2465 2 года назад
I love the lady. Who can fixed the car. 💪💪💪
@josephbarrerareyes
@josephbarrerareyes Год назад
Amaizing job.
@Clamlifenc
@Clamlifenc 2 месяца назад
I love the way u explaining how to diagnose, I appreciate your videos and love watching them
@michopuente8030
@michopuente8030 2 года назад
Buen video
@mauricehosang7102
@mauricehosang7102 2 года назад
Great video lady watching this from Jamaica 👍👍
@josefranciscoesquertalaman3827
@josefranciscoesquertalaman3827 2 года назад
Presente cordial saludo desde Navoyork Sonora México
@mikejerrett7354
@mikejerrett7354 2 года назад
Very interesting 👌
@richardavant9920
@richardavant9920 Год назад
Thanks for this confirmation!
@maxwellsmart5914
@maxwellsmart5914 2 месяца назад
Great instructional video thank you
@ronaldbernabebarga1948
@ronaldbernabebarga1948 2 года назад
Good job mam …
@brookesenfrance3852
@brookesenfrance3852 2 года назад
"Box Office" lady is back. Love her videos
@maxgolub9916
@maxgolub9916 Год назад
Thank you so much I did everything you said and it worked but my battery warning is still lit on my dash but it’s not weak the battery and it doesn’t need a jump how do I reset that
@maurohernan031
@maurohernan031 Год назад
Thanks, God bless you.
@LOV2XRL8RL
@LOV2XRL8RL 2 года назад
For the rear VVT there's not need to take out the intake manifold, just move to the left that black hose full of cables and use an extender with a ratch. It will take less than 10 minutes.
@paulcoonce2493
@paulcoonce2493 4 месяца назад
Great video; thank you. Though I've searched RU-vid on replacing the other bank and nobody has shown the process and headache of removing the plenum to gain access to that one. I was hoping you would show that process on the 3.5L Nissan Altima.
@theresarodriguez3284
@theresarodriguez3284 Год назад
I bought a used truck & it had the same code. It was apparent that previous owner did not change oil often enough. When I took the oil cap off, you can see the burnt oil residue on inside. So, I added oil cleaner and drove truck awhile. Then changed the oil. Once changed, removed the solenoid and soaked it overnight in diesel. Then I tested it by hooking wires to battery. The solenoid plunger moved. Reinstalled. Engine light is still on, I think I can reset by adding a 1 Watt 10 ohm resister to battery. So, was it wise to add oil cleaner first before installing new solenoids? It's a quick fix till I buy new ones.
@javiercarrillo5015
@javiercarrillo5015 Год назад
Great vide..thanks need it!
@oSTYNCLSYo
@oSTYNCLSYo Год назад
Will you get p0081 code for either solenoid? Or is p0081 specific to a bank?
@shawncarr8035
@shawncarr8035 Месяц назад
This helped me out allot
@michaelkipyegolagat3716
@michaelkipyegolagat3716 Год назад
It nice explaination
@radrosbeck3387
@radrosbeck3387 Год назад
I'm having similar issues. I had vvt codes after running out of gas. Turned out to be bad intake. I changed them both but now I have a misfire in cylinder 2. And the intake code p0010 still there.. Changed oil and filters and air filter. Worried to start my car again with the misfire.
@saltwaterheads5244
@saltwaterheads5244 2 года назад
Hello I like your videos but I have a question. I have a humming kind of grinding noise at lower speeds but the humming throughout speeds on the left front tire wheel. I thought it was the bearing but when I turn right it goes away and when I drive on the left side of the road that is banked maybe four or 5° so that the left side of the wheel goes down rides on the lower part of the bank the noise goes away. But the alignment was recently done and it said it was good within spec and after the alignment and still does it I still have all the same symptoms. Can it still be the bearing that is cracked in some place or is the bearing like cockeyed within the hub but we'll still go straight.
@saltwaterheads5244
@saltwaterheads5244 2 года назад
I feel that the tire is riding on the inside of it like cambered top tire in, so that when it rides on a bank road it rides at the correct angle...
@EngAyyad
@EngAyyad Год назад
Hello Dear, thanks a lot for explaining it very well I got important information about facing a problem. Actually, I have " Hyundai Accent 2013 car" I am facing the problem " the Oil light is blinking, when I cross around 20 KM, the light blinking when I stop only not while I'm driving" Anyway, I checked my car by computer tester and I found this error " P0011 'A' Camshaft Position Timing Over-Advanced Or System Performance Bank 1" Please tell me what must to do.
@user-oe2pq9wx1s
@user-oe2pq9wx1s 2 года назад
Should I be using synthetic oil for my Nissan Versa 2014? I have the code p0011
@carlosmadrid9054
@carlosmadrid9054 2 года назад
Very good video, thanks for sharing!!!
@maddetox
@maddetox Год назад
My wife has a LR discovery sport and her CE light just came on. Codes are P0000A, P0011, P000B and P0014. I checked her oil. It was low. Is this a DIY job or should I take it to dealership?
@anotherone3957
@anotherone3957 Год назад
Is it possible that these solenoids will need to be replaced without a code? I have a blue driver and my vvt was showing live data and it was marked with a yellow exclamation amd the other vvt were green. I have a rough idle.
@radrosbeck3387
@radrosbeck3387 Год назад
Did u fix the misfire?
@courtneylaster3746
@courtneylaster3746 2 года назад
I got a problem with my secondary air injection system and the pigtail that’s hooked up to it isn’t getting power any idea of how to fix it please reply
@allpeople7657
@allpeople7657 Год назад
15 Hyundai Sonata sport 2.4L codes P0010 P0011 and where the solenoid located. Thank you for your assistance
@easyrider020
@easyrider020 2 года назад
Should I disconnect the battery before replacement?
@TvrkishOutlaw
@TvrkishOutlaw Год назад
Does this cause a lil knocking ?
@dexterwaithe3688
@dexterwaithe3688 2 года назад
I enjoy watching her
@tpridgen11
@tpridgen11 10 месяцев назад
I absolutely love her.......she is definitely on her A-Game. ❤❤❤
@1AAuto
@1AAuto 10 месяцев назад
+tpridgen11 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@hermandiyproudlysa7703
@hermandiyproudlysa7703 Год назад
Good day, i have a chevy cruze. I get p0011 error. Replaced the intake cam due to sensor pickup that broke off. Then i replaced the solenoid valve. Still get p0011 error after driving for about 15km. When the car is cold and i start it the lifters make a noise then it goes quiet. Must i change my vvt sprocket. Thank you
@joycepeterson6971
@joycepeterson6971 Год назад
The thing i found is the solenoid test good when cold . Put it back on the engine when hot for 25 min. It stop working. check for this.
@stevemacerak6168
@stevemacerak6168 2 месяца назад
Well explained 👏 more like you be helpful , Dude like me ( fixt. ) oil leak...👍
@MC-mh2ju
@MC-mh2ju 2 года назад
Is FULL Synthetic oil actually 100% synthetic or not?
@davidweum
@davidweum Год назад
My oil is still nesrly ambet and at max yet my dash says "get engine serived". My 2003 Saturn Ion purrs like a kitten. I take care of it myself thougj i had a mechanic replace the ECM recently because as a DYI'ER I must know my limitations. There is no more than 1200 miles on my engine (5/30 Pennzoil Platinum - nothing but the BEST)! Why do i get this indicator? Thanks. David Alberta
@carlosribeiro3847
@carlosribeiro3847 11 месяцев назад
I keep up the oil changes and I scanned came that code , i recently replaced the engine gasket , why still comes up !
@ajarreaux
@ajarreaux Год назад
Can someone tell me if the front solenoid the same as the one to the back?
@Panix1313
@Panix1313 Год назад
They are just buy two
@jtomtl
@jtomtl 2 года назад
Nissan VQ35 is a great engine, that is if she is full of good quality oil and not hooked up with a Jatco CVT
@tinishawashington9110
@tinishawashington9110 Год назад
Okay first girl power!!!!!!🍧🎂🍨🌹 Second thank you thank you very much and third don't you ever stop we need you
@ILuvCaroline
@ILuvCaroline 5 месяцев назад
I got an oil change and they didn’t know what service engine soon indicator light was for. It is diff than check engine light. Went to autozone and got a pp0011 code and they didn’t know what it was for. After he pulled out reader the light went off and reset itself. Another thing neither car place knew how to do. Mine is Mitshubishi
@CookNComedy
@CookNComedy 2 года назад
Word on the street is always buy OEM? 🤔 I did and still throwing same code
@allpeople7657
@allpeople7657 Год назад
We plan to travel for thanksgiving and now we got stock rpm high
@wildwoodtop
@wildwoodtop 8 месяцев назад
Here's the gig (ignition on / engine off) (Gm 3.6 over Advanced exhaust) When you plug in all four actuators Three of the actuators engage and when you start the engine it runs absolutely terrible. The fourth solenoid has power but does not activate the solenoid but the solenoid is good cuz I checked it manually. But with the fourth one plugged in and the other three solenoids unplugged the engine runs perfect cuz three of them are not engaged. plug any other actuator in and the engine runs pathetic
@tfkado
@tfkado Год назад
Can anyone help? I have the P0011 code. I took it too autozone and it told me that it was the timing plate(very unfamiliar with this part) I know it’s a cover of some sort. But I have no problems with the car, no rattling, slapping, or any other odd noises, no trouble starting or accelerating, or idle issues. Any help on this? I don’t want to take it and spend more money then I have to, (just purchased vehicle)
@sneakpeeks23
@sneakpeeks23 2 года назад
What about for 2015 Volkswagen Passat tsi
@CookNComedy
@CookNComedy 2 года назад
What a coincidence I have yet same code on my murano. Changed vvt solenoid, oil pressure sensor, and both cam sensors, and damn code still there. Stooopid nissan
@johnnyblue4799
@johnnyblue4799 2 года назад
Did you forget to erase it? Make sure you have the proper oil weight in the engine.
@mjb242
@mjb242 Год назад
Next thing to check is oil pressure with a manual gauge, if something is wrong with engine and oil pressure is low, this code will trip.
@eutimiochavez415
@eutimiochavez415 2 года назад
Do all cars have this ?
@1AAuto
@1AAuto 2 года назад
+Eutimio Chavez Yes, all vehicles will have this
@jhm2276mx
@jhm2276mx 2 года назад
What happen when it’s over oil on the engine?
@petrushall
@petrushall 5 месяцев назад
Help!! A have P0011 and the problem is not VVT, a tried it. Somtimes its code P000A but most of the time P0011. What to do?
@lisadurrant4279
@lisadurrant4279 Год назад
Where is the vvt selnoid location in 2015 Hyundai sonata sport 2.4l?
@phillhuddleston9445
@phillhuddleston9445 Год назад
You either advance the timing or retard the timing, I know that last word is a trigger word for some sensitive snowflakes but it's accurate for what you are trying to describe, do not let their overly sensitive feelings stop you from stating the facts using the best and most accurate words to describe what is happening. Great educational video by the way!
@ur_a_buS
@ur_a_buS 2 года назад
Engineers design car, spec a maintenance interval for all serviceable systems, end users don't do maintenance, say the car is horrible. Engineers redesign systems to be "sealed for life" and use "lifetime fluids". Problem solved right?
@oksooners
@oksooners 9 месяцев назад
I replaced both vvt solenoids. But i still get the code to replace them. And the car dies when slowing down, and seems like its going to die when stopped. Any idea?
@1AAuto
@1AAuto 9 месяцев назад
+Oksooners We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@Ysotomotife_828
@Ysotomotife_828 2 года назад
👍
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,3 млн
Student Presentation: Variable Valve Timing - VVT
18:11
Variable Valve Timing Explained - Like Never Before
14:23
P0021 P0011 Code Repair and Timing Relearn Procedure
7:11
Крутыш на БМВ
0:12
Просмотров 1,2 млн