Тёмный

2016 350 HD XL ford transit van Brakes and rotors 

Dan Sager
Подписаться 157
Просмотров 13 тыс.
50% 1

There are a few different styles Of front rotor assemblies on his found this one is more difficult and it shows how to get the assembly apart so you can actually replace the rotors,
I’ve seen a few different styles but not one like this so if you have the brake and rotor style like this one here is a good how to video! 

Опубликовано:

 

20 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@jeremyreid8465
@jeremyreid8465 2 года назад
Got to be kidding me I have to go and get a tea 40 long now damn Ford thanks for the great video
@Brad11451
@Brad11451 7 месяцев назад
Hub bolts are single use only..
@syncrosimon
@syncrosimon Год назад
Great video, this is the same brakes as on a UK spec 460 Transit minibus.
@guineapigzed
@guineapigzed 2 года назад
You need jack stands.
@richardwhitaker4148
@richardwhitaker4148 2 года назад
Next time just stick a big, flat screw driver in between the pad and rotor before removing the caliper and depress the pistons so its done before you even take it off. Never understood the need for the 150 tool to compress the pistons. Been doing this for years and getting brakes in and out
@thecloneguyz
@thecloneguyz Год назад
Been using a C-clamp in an old brake pad for 25 years
@raaawwwwrrr1
@raaawwwwrrr1 Год назад
Woooww i was banging on this thing for a while
@zachpetersonguitar
@zachpetersonguitar Год назад
My short Mac Tools T40 3/8 drive fit in the hole FYI
@guineapigzed
@guineapigzed 2 года назад
Cramp the flexible brake line, open the bleeder. Use a flat screwdriver to press the calipers back open. That way you don’t return old brake fluid to the master.
@noahbell7767
@noahbell7767 Год назад
I noticed you didn’t use new bolts. Is that a gimmick to get you to spend more money? Great video though.
@guineapigzed
@guineapigzed 2 года назад
Don’t use an impact with non impact tools.
@MrStuntinator
@MrStuntinator 9 месяцев назад
Those hub bolts are horrible, if rusted you are going to have a nightmare getting everything apart. The torx bolts are the worst
@mauifoam1315
@mauifoam1315 Год назад
Why not un bolt the hat first?
@natec4359
@natec4359 3 месяца назад
Rotor comes off behind the hub. If you take those out you’d have to hold the rotor from flopping around for every hub bolt.
@thecloneguyz
@thecloneguyz Год назад
Funny my van only has five lugs and they still call it an HD
@ccroson7935
@ccroson7935 2 года назад
Absolute bullshit system that foreign has especially the rear brakes pulling the fucking complete axles out and everything is a one time use so every time you change the pads you have to change the rotors
@guineapigzed
@guineapigzed 2 года назад
Get off the ground.
@joecvimedical
@joecvimedical Год назад
I like it! That's the way us DIY'ers have to do it. I do use a big piece of cardboard myself.
Далее
2017 Ford Transit 150 Rear Brakes and Rotors
10:05
Просмотров 74 тыс.
Ford Transit rear brakes (the right way)
35:57
Просмотров 203 тыс.
Miyagi & Andy panda - minor (пародия Beatrise)
0:30
A SMART GADGET FOR CLUMSIES🤓 #shorts
0:21
Просмотров 1,7 млн
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
Ford Transit-250 (T250) Rear Pads and Rotors
22:18
Просмотров 10 тыс.
ford transit front brakes installation pads and rotors
15:09
Ford transit front brake job (the right way)
22:21
Просмотров 124 тыс.
Ford Escape - Front Brake Pads & Rotors
15:29
Просмотров 202 тыс.
The Only Brake Pad You Should Buy
10:07
Просмотров 850 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,6 млн