2018 F150 Cabin Air Filter Install

Подписаться 8 тыс.

Просмотров 89 тыс.

50% 1

Today I'm going to show you the easiest way to replace a cabin air filter in an F150. This video will cover most late model F150s. The process is simple and only requires minimal tools. A 7mm socket, a trim removal tool, and a new cabin air filter. In this video we will go step by step through the replacement of the cabin air filter.
Motorcraft Cabin Airfilter FP92: amzn.to/3SGGF5W
Trim Removal Tool: amzn.to/3M5NOuf
Don't Forget to Subscribe!
ru-vid.com...
Don't forget to check us out on Instagram: / smackeys_garage
As an Amazon Associate I earn from qualifying purchases
All videos are for entertainment purposes only. Attempt these projects at your own risk! If you do, make sure you follow all manufacturers instructions!

Авто/Мото

Опубликовано:

5 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@haydenrichardp3712 2 месяца назад

Talk about making a mountain out of a molehill Ford did a great job in designing this job to replace it.

@TheRealLifeNPC 9 месяцев назад

Built Ford DUHf. 2 minute job turned into a headache. Thanks for helping me not break any clips on my dad's truck. You got a thumbs up from me.👍

@SmackeysGarage 9 месяцев назад

That’s the worst feeling when you break a clip. Glad I could help!

@papo1515 6 месяцев назад

ridiculous......why?

@GUIPETE 24 дня назад

If this is tough then you need to stop trying to work on your stuff immediately. Lol it’s like 2 screws and a few tabs. 😂

@Loghopper420 11 месяцев назад

Good video. Straight forward and to the point. I like it. Made the job super easy for me. My airflow was poor and it increased greatly after replacing the cabin air filter. Great success! Thank you.

@SmackeysGarage 11 месяцев назад

Glad to hear and thanks for the feedback!

@bertadelaudebri7179 8 дней назад

Thanks, much appreciated and quite helpful - it literally took me 20 minutes!

@SmackeysGarage 8 дней назад

Glad it helped!

@genegribble6945 Год назад

Guys. DIY Dad stuff. My son plays with Lego’s. The little orange device used to separate Lego’s and it is FREE with Lego’s and got the job done. You are welcome. Dad Proud. Good Luck folks.

@SmackeysGarage Год назад

Hey Gene, that's a great tip!

@slimpickens4892 Год назад

Thank you so much man!!! Great video. Very detailed and easy to follow.👍🏼

@SmackeysGarage Год назад

You are welcome! Thanks for the feedback!

@musclecarmitch908 Год назад

Not as easy as some I've changed, but not as hard as some also! Great info!👍

@SmackeysGarage Год назад

Thanks Mitch!

@charleskronvall8735 Месяц назад

Straight forward and easy to follow. Saved time and $$$'s versus having it done at the dealership.👍

@SmackeysGarage Месяц назад

Thanks for the feedback!

@cubehire3653 Год назад

You have to be kidding. It was easy to replace the cabin filter on my old Silverado. Not so easy on my F-150. It's a poor design to involve all these steps. This is not the only stupid design flaw that I have found on my F-150.

@SmackeysGarage Год назад

It’s definitely a lot of steps. Wait until you have to replace a headlight bulb!🤣

@anthony11999944 11 месяцев назад

@@SmackeysGaragebulbs are a pain!

@loganmoneymaker9741 4 месяца назад

Wait until you change the oil

@kevinpearson9993 27 дней назад

Will this help with ac not blowing max speed, my ac barely blows all of a sudden?

@SmackeysGarage 26 дней назад

@kevinpearson9993 if the filter is completely clogged it could definitely cause a low airflow situation.

@seankinal858 11 месяцев назад

Air flow arrow points downward

@miketrejo2629 Год назад

Good video. I found that by adding just a touch of silicon spray to the tabs helps everything snap in much easier, and it helps for future removal as well. 👍🏻

@SmackeysGarage Год назад

Thanks Mike. That’s a great tip

@jasonwyld5495 9 месяцев назад

Thanks man made that simple and cheap to replace 👍

@SmackeysGarage 9 месяцев назад

Glad it was helpful!

@bardstables8909 Год назад

I feel this is something that is often overlooked. Thank you for the reminder.

@SmackeysGarage Год назад

Thanks Bar D Stables. Most come out looking like mine… or worse!

@bardstables8909 Год назад

@@SmackeysGarage I have no doubt. Lol

@michaelharper2339 4 месяца назад

He made that look easy! I got all but the ends of the plastic part undone and I am too scared to go any further till I understand more about these changes clips

@SmackeysGarage 4 месяца назад

You might be able to look the clips up on Tasca or get the part numbers and search for them. They definitely do feel like they are going to break sometimes when you are really pulling on them.

@Aleronmkt 10 месяцев назад

thanks for this video very detailed

@SmackeysGarage 10 месяцев назад

You are welcome!

@zackwilson8283 7 месяцев назад

Thank you; very helpful

@SmackeysGarage 7 месяцев назад

Glad it was helpful!

@arielmelecio7243 2 месяца назад

Nice explaination have to do it to my pick up, its 40 thousand mile and had never replaced it 😮

@SmackeysGarage 2 месяца назад

Thanks! it isn't too bad to do. How did that filter look after 40k??

@ivan5180 Год назад

Now I'm curious if mine was ever changed, I had the full maintenance package from Ford and brought it in for all the regular services, but I don't recall if they ever had that listed as changed or not so now I have to go see, I bought the truck December 2020, it's a 2019, and my ac flat out stopped working, so I'm gonna get a recharge kit but should check this too

@SmackeysGarage Год назад

Definitely check it out. It’s pretty obvious if it has ever been changed. They do collect a lot of foreign materials.

@easycomeeasygo8901 17 дней назад

Thank you for the video 👍. I dont know how the other brands do it, but Dam Ford, was there no way to make this faster/easier/less clips that will break? These trucks range from high 30s to 90k plus. And r work trucks many times. It should be easier/faster to do this job. These clips will get brittle and break just in time for replacement parts to become obsolete. Ill be doing mine soon

@SmackeysGarage 17 дней назад

Yea it’s nuts. I just did one in our Audi and it was three thumb screws. Took five minutes and no tools. You are welcome!

@kyleritter3074 3 месяца назад

I'm now the proud own of some panel pullers, just to replace a filter. Lol oh well, they will come in handy in the future

@SmackeysGarage 3 месяца назад

That’s the good part of them. You feel less bad about ripping panels apart in the future lol. I’ve had them come in handy a few times.

@nikkocavalier8479 7 месяцев назад

Thanks for this video...

@SmackeysGarage 7 месяцев назад

You are welcome!

@erictepen6033 Год назад

Excellent video, however, trying to remove the plastic that was screwed in, seems impossible. I pulled fairly hard, but I'm afraid of breaking it. What kind of tool was that you used?

@SmackeysGarage Год назад

That blue tools are linked in the description as a trim removal tool. I use them on lots of body pins on the truck. That panel definitely is clipped in really tight.

@hectorrosado5807 Год назад

Thank you Sir You saved me a few bucks 😊

@SmackeysGarage Год назад

Glad I could help Hector!

@mardycovarrubias9984 10 месяцев назад

Thank w

@noneed4me2n7 Год назад

Your vids stopped showing up in my feeds for some dumb reason. Hope your doing well, progress while slow is still coming along on my 69. Got some of the suspension done but it was too much chaos for video, gonna try later.

@SmackeysGarage Год назад

That’s weird. I am doing well. Looking forward to seeing the video when you get it up. It’s been a while since you’ve shown the car!

@REVELATIONSIXEIGHT 3 месяца назад

On that piece that you pulled at (minute 2:11) have more that 2 tabs that you forgot to mention

@paulblokland1321 10 месяцев назад

Where do ya get tool??

@SmackeysGarage 10 месяцев назад

They are linked in the description

@jimmeyer4822 Год назад

To remove the damper you need to pull it toward the glove box door THEN pull it out. He skips that part.

@SmackeysGarage Год назад

Thanks for calling that out. I didn’t say that while taking it apart but talked about putting it together. Nice catch.

@dlandis03 6 месяцев назад

Yeah I broke mine lol

@izzy29413 10 дней назад

So I see Ford wants to be BMW in regards to making everything easy to maintain

@SmackeysGarage 10 дней назад

That's funny. Even our Audi is easier to maintain than the truck.

@AndyKruseChannel Год назад

I like simple tasks like this, next time do one for my Tundra! :)

@SmackeysGarage Год назад

Me too! After you see how to do it is very simple. Finding out how to do it without a video… not so easy!

@jibjibb4719 Месяц назад

This is very easy especially on the XL trim. If this is too complicated for you, you probably shouldn't work on your own vehicle

@SmackeysGarage Месяц назад

Yea I agree. The lower trim models are definitely the easiest due to not having as much of the trim in the interior.

@multitieredinvestor183 11 месяцев назад

Almost as difficult as changing the air filter on the Honda Goldwing.

@SmackeysGarage 11 месяцев назад

Haven't had to do that, but I'm assuming it isn't easy!

@deansouth8 7 месяцев назад

Is that other side cracked? LOL

@SmackeysGarage 7 месяцев назад

Other side of?

@deansouth8 7 месяцев назад

@@SmackeysGarage the far side of the glove box where he's supposed to bend it

@JohnDOE-ho3ht 15 дней назад

And just like that. American engineers should be ashamed of themselves.

@davianquinn Месяц назад

All this for a goddamn cabin filter?????

@SmackeysGarage Месяц назад

Yep lol

@corkyzeledon6559 Год назад

Sheesh what a pain in the a$$

@SmackeysGarage Год назад

It wasn't too bad. Try changing the headlight bulb on this truck lol

@neilg5941 Год назад

@@SmackeysGarage I just finished doing that! I think I need an extra elbow that bends the other way in order to comfortably reach the top bulb...

@SmackeysGarage Год назад

That sounds about right!

@rodneykagarise2953 9 месяцев назад

Doesn’t match my 2018

@SmackeysGarage 9 месяцев назад

What is different?

@rodneykagarise2953 9 месяцев назад

@@SmackeysGarage there is another piece of trim in front of the screws after you take the first piece of trim off. Maybe because it’s a lariat?

@bigbassjonz 7 месяцев назад

Good grief. Have to take the Dash apart to replace a filter. The more I find out about my truck, the less I like it.

@SmackeysGarage 7 месяцев назад

It's an awesome truck. There definitely are a few nuanced things like this and the headlight changing that are more work then I'd expect.

@dna2405 23 дня назад

Jesus Christ man. Wth ford?