2018 Kubota SVL952S Engine rebuild V3800 

I'll check back and see if I still have it written down and let you know. I thought I shown the paper in the video but with that said I'll see what I can find for you.

Originally from Kubota however I now carry a full line of MaxiForce parts for the Kubota

Contact me I would be happy to sell you what you need

Kubota V3800 Tightening Torque Specs Cylinder head cover screw, Nm (lb-ft) .............. 6.9-11.2 (5.1-8.31) Cylinder head screw (M12x1.25), Nm (lb-ft) .............. 98.1-107 (72.4-79.5) Connecting rod screw (M10x1.25), Nm (lb-ft) .............. 79-83 (58-61) Flywheel screw (M12x1.25), Nm (lb-ft) .............. 98.1-107 (72.4-79.5) Crankshaft screw (M16x1.5), Nm (lb-ft) .............. 255-274 (188-202) Main bearing case screw (M14x1.5), Nm (lb-ft) .............. 138-147 (102-108) Rocker arm bracket screw (M10x1.25), Nm (lb-ft) .............. 49-55 (37-41) Nozzle holder clamp nut .............. (M8x1.25), Nm (lb-ft) .............. 18-20 (13-15) Injection pipe retaining nut (M12x1.5), Nm (lb-ft) .............. 23-36 (17-26) Oil pump cover screw, Nm (lb-ft) .............. 7.9-9.3 (5.8-6.8) Injection pump unit mounting nut (M8x1.25), Nm (lb-ft) .............. 18-20 (13-15) Camshaft set screw (M8x1.25), Nm (lb-ft) .............. 24-27 (18-20) Flywheel housing mounting screw (M12x1.25), Nm (lb-ft) .............. 78-90 (58-66) Crankcase mounting screw (M10x1.25), Nm (lb-ft) .............. 49-55 (37-41) Injection pump mounting screw (M8x1.25), Nm (lb-ft) .............. 24-27 (18-20) Governor housing mounting screw (M6x1.0), Nm (lb-ft) .............. 9.8-11.2 (7.24-

Thanks for watching. Hope that helps

@@vintagediesel-1 Thank you for prompt reply, Did you encounter any complications after the overhaul? Can we have an update Video? How has the engine been since? I guess I am just a bit curious as to why they say it is not rebuild-able?

@@mohaghasemi The unit has performed flawlessly since. I do not understand why they make the claim that the unit isn't re-buidable other than to say that the parts are clearly available and this wasn't a 1 off build as I have built the previous series V3800's in the past. I will reach out to the client and see about as possible follow up video in the future . Glad to hear from you and again thanks so much for watching.

Any chance you remember total parts cost for rebuild? I’m about to rebuild exact same engine and just curious what my parts should cost? Thanks so much for the video!