2020-2024 Toyota Highlander OEM Running board Installation (DIY)

Подписаться 2,5 тыс.

Просмотров 80 тыс.

50% 1

Join our growing Facebook 4th Gen Toyota Highlander DIY community!
groups/39560...
If you are looking to save some money from the dealer and install the OEM factory Toyota running boards yourself, you found the right video!
I'll show you how I installed the running boards on my 2021 Toyota Highlander Platinum Hybrid SUV. Here is what you'll need before you get started:
1- Toyota Factory Installation PDF
2- Philips Screwdriver
3- Torque wrench
amzn.to/3sj7i6i
4- 10mm deep socket
5- 6 inch extension
6- Panel Removal Tool
amzn.to/3sjWJQv
7- Tape or Masking Tape
8- 3M Auto Body Sealant
amzn.to/3hjusTM
9- Rivnut Tool
amzn.to/3VrMuq2
2020-21 OEM Running Board Installation instructions:
drive.google.com/file/d/1EMOc...
OEM Toyota Running Board Part No: PT938-48200
ebay.us/prfslY
amzn.to/3oNYjrA
(Disclosure: The link above is an affiliate link. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.)
Inquiries: vietbubbletea1978@gmail.com
Thanh Tran

Авто/Мото

Опубликовано:

29 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 295

@hualant 2 года назад

Great tutorial, man. Didn’t even bother with printing instructions. Some of the rivets were a bear to get on but you saved all of us a bunch of money. Wish I could get the gapping a tiny bit better but can’t complain with DIY’ing Thanks.

@Unplugged704 3 года назад

Exact video I'm looking for. Want to install on my wife's 21' Highlander XLE. Thanks!

@bobborsit5985 2 года назад

Huge thanks!! Helped me a ton on my wife’s 22 hybrid platinum 🙏🙏🙏

@nefti350z 2 года назад

Great video! I’ll definitely be back to replay it come spring time!

@EuanHenry 2 года назад

Thank you so very much, I just got done installation of the running boards on my 2020 Highlander and your video made it a breeze.

@vietbubbletea 2 года назад

Nice, I'm glad it helped!

@vrod1a 3 года назад

Very detailed and helpful 👍

@doghouse94545 3 года назад

Very helpful!!! Gonna order my running board n do my installation now!!👏👏👏✌️

@phunguyen888 3 года назад

Got my running board on. Thanks Viet!

@vietbubbletea 3 года назад

Nice job brother!

@blackcoffee730 Год назад

Thanks for this! Appreciate your time.

@batch8144 2 года назад

Thanks. Putting the rivet is the hardest part. Got elbow problem, but was able to. I miss to plug the 4 holes on one side. Anyway your upload was very helpful. Replace the brake and gas pad and will install the window wind deflectors. God Bless.

@estella3131 Год назад

I just wanted to say thank you for making this video. I bought a 2020 Highlander and I told my husband about this video you made. Thanks to you, it was easy for him to install the running boards for me. Thank you so much!

@sherwinalavanza6693 10 месяцев назад

Where did you buy?

@vietbubbletea 10 месяцев назад

At local Toyota dealership

@estella3131 10 месяцев назад

@@sherwinalavanza6693 I purchased it online from Toyota.

@boardwalkcaper8130 2 года назад

Your careful and thorough discussion of each step was fantastic. It’s amazing that your video far and away is better than any OEM help I have come across for any installation task. If you’re not, you should be an instructor/teacher. Kudos to you! I agree with others that you should post an OEM trailer hitch installation so the rest of us can follow your lead and tackle this project as well. Thank you.

@vietbubbletea 2 года назад

Thanks for the insightful feedback, much appreciated! I actually plan to install the OEM tow hitch this summer before I take my family on a road trip and I definitely plan to make a tutorial for that. Stay tuned!

@CumBrianFries 2 года назад

@@vietbubbletea Do these running boards interfere with the front mudguards in any way? Will I have to take out my front mudguards before installing the running boards?

@vietbubbletea 2 года назад

@@CumBrianFries No interference at all with the front mudguards. You don't need to remove it during installation because there is plenty of clearance between the running board landing step and mudguards for both to exist so you're good!

@CumBrianFries 2 года назад

@@vietbubbletea Alright, thanks man!

@daveflores879 2 года назад

This is an excellent video. My local dealer wants $750 for install! You just gave me the boost I needed I to get this done myself :).

@vietbubbletea 2 года назад

I'm glad it boosted your confidence to DIY! I felt the same when the dealer quoted me over $800 to install the running boards. Money saved and you can give yourself a pat on the back for the accomplishment! 👍

@michellepeterson407 2 года назад

@@vietbubbletea mine is quoting me 1100. wow. thanks a lot for the video. My hybrid comes next month and I want the running board to protect my dogs ability.

@vietbubbletea 2 года назад

@@michellepeterson407 Yikes, that's why we call them stealerships! The price of labor definitely varies so if you can do it yourself, it would save you tons! I hope you love driving your Highlander as much as I do mines!

@TheSaad2013 2 года назад

You are a good man, thanks a lot for this amazing and informative video. Enjoy your Toyota.

@vietbubbletea 2 года назад

Thanks, I'm glad the video helped! The car is definitely fun to drive while finding little things to customize and modify!

@jambuusa1 3 года назад

Great job! Thanks.

@protect139 4 месяца назад

Thank you. I installed mine with the help of your video.

@jaycasi2092 3 года назад

Oh thank you so much for the video / I too am planning to install some running boards for my Highlander

@vietbubbletea 3 года назад

My wife and kids love the running boards although I don't use it much but it definitely gives the Highlander nice lines that make it look great IMO, I hope you like it on your car too!

@replica9000 Год назад

Great video! Installed these running boards on my wife's Highlander today while the weather was somewhat warm. Everything was mostly smooth. The rivnuts are a bit of a pain. I bought a similar tool from HF. Gets the job done. I did see another method that involves a standard M6 bolt and nut with a couple wrenches to set the rivnuts. Might be easier to get leverage in tighter spaces and save a few bucks on a tool that'll most likely be used once.

@hon143 2 года назад

Thanks again for the dyi video! I just installed them today! Took only about 2 hrs total. The first side took a little over an hour. The other side took about 30 minutes only since I got the hang of it once I did the first side. And imagine.....the dealership/stealership wanted $500-1000 for just the labor alone! WOW!!!!!

@vietbubbletea 2 года назад

Thats awesome to hear! Don't you feel a great sense of accomplishment and knowing that the stealership didn't bop you on the labor costs? I'm glad the video helped!

@benjaminkelani8371 Год назад

Where did you purchase it from please?

@vietbubbletea Год назад

@Benjamin Kelani At my local dealership using my Costco discount. You can find it online as many dealers sell it on their websites as well.

@Faizan-714 3 года назад

Great vid! Bout to install one on my xse !

@louisleal Год назад

Mine did not come with instructions so thankfully you had this vid online. Much appreciated.

@jaimeantezana9295 Год назад

Nice video. Thanks for sharing

@nawidsayegh4986 3 года назад

thanks brother , very helpfull

@andrewjohnson9269 3 года назад

Very helpful!! I really appreciate it!! You the man!!

@vietbubbletea 3 года назад

Thanks for the positive feedback! You'll feel a sense of accomplishment after it's done!

@andrewjohnson9269 3 года назад

@@vietbubbletea yes, I finished it last night on my wife xse. I would have NEVER figured out those folding tabs with the tread if it wasn't for your video. Lol

@toumoua3608 2 года назад

Thanks for the video

@stewarthemphill5033 Год назад

This helped on a 22, thanks! With rivet gun make sure to have it open prior to screwing the rivnut. Only took it apart like 7 times and wasted an hour trying to figure out how to use it. As far as the sealant, mine was already 2 inch from hole so didn’t worry about scraping and replacing sealant

@stewarthemphill5033 Год назад

Oh and jacked up back tire to put rivnut in bottom

@blainenornhold8608 2 года назад

Nice work

@RamonCastillo-bq7ey Год назад

Thanks a lot for your video, installation will be a lot easier after watching your video

@vietbubbletea Год назад

Appreciate the support, try to get a short handle rivnut tool so you can maximize the clearance when crimping the rivnuts closest to the door hinges, you'll be fine!

@dr.danielramirezptdpt9145 8 месяцев назад

Great video! Thanks for swaying me to have someone else just do it 😅

@mohdyemen 3 года назад

The dealer quoted me $450 to install and you saved me that $! Thank you so much! I have a baby coming soon and really needed these for ease of use :) God bless you

@vietbubbletea 3 года назад

Right on brother! I'm so happy you were able to benefit from this video which is exactly why I decided to make it! The dealer wanted to charge me $350 for labor so I totally understand how you feel especially with a family. Congrats on your future bundle of joy!

@introduceher9459 3 года назад

Was it really that easy to install

@vietbubbletea 3 года назад

@@introduceher9459 Yup, just follow each step I showed in the video, the rivnut installation is probably the most labor intensive that requires some muscle but it's a pretty straightforward process.

@AtifAlmoshadq 3 года назад

Thanks man it was so helpful

@jjk-bn9xw Год назад

Ughh, I messed up. I guess one of the rivnuts wasn’t secure and it must be spinning so now I can’t get that one screw the rest of the way in, or back out. I haven’t torqued the other screws because I assume I’ll need to take the whole thing apart. Hacksaw that screw off. 😮

@bikuta29 3 года назад

Bro great video

@vietbubbletea 3 года назад

Thanks man!

@americandude3825 2 года назад

Ordered a 22 xle v6 AWD with the grey interior and wind chill pearl. Beautiful. I plan to put a 2” lift on it with some bf Goodrich ko2 tires so it’s a little better in deeper water. At the beach it floods really fast with heavy rain. If it rains for a day straight some areas get over a foot of water in the road.

@vietbubbletea 2 года назад

Great interior/exterior color choice! Wow, that's a lot of rain! Our Highlander has an 8 inch ground clearance so every inch counts where you live!

@huntermike250 2 года назад

Thanks for the video...I just bought a 2022 Highlander Platinum and wanted to know how to install them...now I know...will let you know how I did...again thanks!!!

@vietbubbletea 2 года назад

Awesome, you're gonna love driving it! The install is straight forward just like in the video, you've got this!

@Famousjack 10 месяцев назад

Great Job

@daveweigle1623 Год назад

Great video! I need boards on my 2022 Highlander so my wife can get in and out easier. You made it look easy--which it is. Shop manual says 1 hour @ $169.95. I think I'll do it myself. Thanks!!

@vietbubbletea Год назад

Yeah, most dealers are charging $400-800 just for the labor alone. You should have no issues doing it yourself, thanks for the support!

@thienthan324 2 года назад

I just bought the running board on sale, ordered online $362, which is the cheapest I’ve seen so far. I’ll watch your video carefully before attempting this. Wish me luck on installation. Lol

@vietbubbletea 2 года назад

Dang, that's a steal of a price, good for you! Good luck on the install and feel free to reach out if you get stuck, I'm sure you'll do fine.

@josediaz2950 Год назад

VERY GOOD VIDEO I ORDER MY TODAY

@durkjenkins578 11 месяцев назад

I am about to do this do today 8/1/23 I hope this goes well, thanks for the video.

@vietbubbletea 11 месяцев назад

Good luck, I'd recommend a short handle rivnut tool as the clearance can be limited closer to the door hinges, I hope it went well.

@RufinaChan Год назад

Thank you and very clear. The current price for this running board is cad680 ... incl installation, just slightly below 1k !!!

@vietbubbletea Год назад

Yikes, that's inflation for ya! Definitely save some money if you can install it yourself

@fixodent6 2 года назад

Just placed an order for mine today. 387.61 with tax included. Will pickup at dealership. Harbor Freight 10in Riv Bolt 10in tool for 52.00 including tax. Will definitely have your video playing from lap top when I install them. Have also order the illuminated door sills which should be plug and play., finally got the time to install them , the rivnut tool kicked my ass, but otherwise turned out great, didn’t even look at the instructions, just played your video

@vietbubbletea 2 года назад

That's an amazing price for the running boards, have a fun time with the install!

@fixodent6 2 года назад

@@vietbubbletea Toyota is running a 10% discount for the Holidays, too bad I'm not a Costco Member.

@user-xx1yq5jl9r 2 года назад

$200 off is super good deal. I am SF Bay Area. Costco auto program only offer 15% off. But I did find a Toyota dealer 100 miles away offer $93 off. Thank you for your video.

@vietbubbletea 2 года назад

Thanks, the 50% off (up to $200 off) Costco coupon is only available immediately after purchasing the car when they ask you to complete a customer survey. If the dealer entered the transaction as a Costco member, there's an automated email Costco sends to redeem this coupon. After this, it's only 15% off. Sounds like you got a fair deal though!

@user-xx1yq5jl9r 2 года назад

@@vietbubbletea oh I remember I had that coupon from Costco when I bought my car. But didn’t think about getting the running board until I saw your video last week. Lol.

@vietbubbletea 2 года назад

@@user-xx1yq5jl9r It's all good, you're still saving a lot of 💸💸 installing it yourself!

@user-xx1yq5jl9r 2 года назад

@@vietbubbletea yup. That’s true. Toyota charge like $280/hr labor. That’s ridiculous.

@vitoasaro439 2 года назад

Great video, & very helpful! I noticed you installed the clear tape to hold the "flag nut" but didn't see where you removed the tape at any point. Did you leave the tape affixed to the car behind the running board you installed? Thanks!

@vietbubbletea 2 года назад

Thanks, I left the tape on otherwise the wakai nut would fall off before I can mount the running board and thread the bolt through. The directions don't mention to take the tape off either. I hope that helps!

@charlesdavenport7520 Год назад

Excellent video I would have liked to see the bolts that you installed on the bottom of the running board towards the end of the video

@vietbubbletea Год назад

Hi Charles, the remaining nuts and bolts can be found at the 17:00 mark in the video, thanks!

@FrankPerkins Год назад

Great video. The only other tip I would recommend is to ensure you properly seated your rivnuts. After you press in a rivnut, check with a bolt to ensure it goes in smoothly and the rivnut doesn't spin freely. Don't ask me how I figured out that the hard way :-)

@vietbubbletea Год назад

Great point Frank! I've had others mention how the bolt still sinned freely until they realized that the rivnut was not crimped all the way. I'm sure you're sharing this tip for a friend! 😉

@jjk109 Год назад

@@vietbubbletea I’m concerned about using the rivnut gun. Like if there’s a certain amount of pressure, or whatever.

@hogman2524 Год назад

What bolt thread do you need oin the Rev nut tool?? Metric or standard?? I suppose Metric, But what size?

@kstravelvlog497 3 года назад

Great Video ! Will this work on 21 platinum..and do you know if they also have front bumper guards?

@vietbubbletea 3 года назад

OEM running boards will fit all 2020-21 Highlander trims. I have 21 Platinum Hybrid so I can confirm. There are no OEM front bumper guards that I'm aware of but I've seen aftermarket ones on ebay.

@mlacson12 Год назад

Thanks Thanh! Just completed this. Now my muscles are sore mainly from the rivet nuts install lol. Definitely practice and learn to use the rivet nut tool. When is the OEM hitch install coming?

@vietbubbletea Год назад

My chest and forearms were sore too! lol Hopefully I can install the tow hitch this spring when the weather warms up. It's too cold and rainy here in Seattle.

@vzuolee Год назад

Great sharing. I could not insert the M6 rivet nut into that hole, because the hole on body frame is less than 8mm, 5/16". Looks your just pefectly pushed in. Any comment? Thanks a lot.

@vietbubbletea Год назад

That's interesting, did the other holes fit the M6 rivnuts that came with the hardware? Mines were a snug fit before I crimped them in place. Only thing I would suggest is trying to force the rivnut in if possible or drilling the hole slightly bigger to fit but you'll need to seal the metal so it doesn't corrode or rust over time. Good luck!

@dominicanhustlershow5896 Год назад

I have the XSE 2022 and i want to installed this part but doesn’t look so strong to step on it 😊

@vietbubbletea Год назад

It has a 350lb weight limit so I think you'll be okay. 👌 We have members in our Facebook group that are taller and bigger than me and they have no issues with the OEM running boards when stepping on it.

@TheRogRamjet Год назад

Great video, you covered everything really well. Only thing I would suggest is to film in landscape. Portrait just gives a very narrow viewpoint.

@vietbubbletea Год назад

Thanks, I realized that afterwards. LOL Not bad for my first RU-vid tutorial video and still learning!

@GerardCordero 2 года назад

Any tips for the bottom rivet nuts? You got the 13” rivnut tool, right? Any clearance issues without needing to jack it up? Thanks!

@vietbubbletea 2 года назад

I actually used an 11" rivnut tool similar to this however I've heard others have used a 14" tool without jacking the car up but you'll have less clearance to work with for the rivnuts located near the door jams. The shorter tool definitely gives you a better angle however it may require more arm strength to crimp due to the shorter handles. Good luck! Rivet Nut Tool, 11“ Rivet Gun Rivet Nut Tool Reamer 3 in 1 Set, Including 50Pcs Rivets, 60Pcs Rivet Nuts, 6 Metric & SAE Mandrels and 2 Reaming Mandrels with Carrying Case-TLRNG04HD smile.amazon.com/dp/B09B6W82C2/ref=cm_sw_r_cp_apan_glt_fabc_KZDTNHXKQGKDHKH0YMND?_encoding=UTF8&psc=1

@larrym8581 Год назад

Nice job on highlander videos, thinking about buying a hybrid. Would you recommend the hybrid model? Thank you!!!

@vietbubbletea Год назад

Thanks! I love my hybrid and would definitely recommend. Toyota hybrid technology is one of the best and you have a 10yr warranty on the hybrid cell battery as well.

@MsJbraswell1 Год назад

Where did you buy the 3M sealant, can't find it on Amazon or local auto parts stores? Great DIY video on the install.

@vietbubbletea Год назад

Thanks, I got it on Amazon but I see it's not available at this time. Other people have mentioned skipping this step and have had no issues with the running board clearance so try doing a dry fit to see if you can skip it too!

@sonnguyen-gd6uj Год назад

Anyone use any alternative to the 3m auto body sealant? For example clear rtv silicone adhesive & sealant? It’s only $5 at harbor freight

@vietbubbletea Год назад

Some members skipped this step and installed the running boards without removing the existing sealant. If you can dry fit your set with no bulging, you most likely can skip the sealant step to.

@paulp1166 2 года назад

That was a really informative video. Now if you only had one for the full trailer hitch installation.

@vietbubbletea 2 года назад

I've been debating if I wanted a tow hitch especially to mount my bikes. If I do, I'll definitely make an installation video.

@paulp1166 2 года назад

@@vietbubbletea I actually installed the factory hitch, kick sensor and the convertor. I did not have to remove the full bumper cover. The bottom grey piece is the part that has to be replaced. It is held on by two white clips that just push in then the rest is just pull out. One person can also get the hitch on. Go for the factory hitch it is a nice finished off look.

@vietbubbletea 2 года назад

@@paulp1166 Thanks for the tips! I've seen others take the entire bumper off so it's good to know that it's not necessary. If I do this, I will definitely go with the OEM tow hitch too, looks so much cleaner and also serves as a stepping pad to access the back of a roof mounted cargo box. Do you happen to still have all the part numbers required and where did you order them from? I heard it's on back order at many dealerships.

@paulp1166 2 года назад

@@vietbubbletea My posts keep disappearing I guess because I included links. I don't see your email address listed in the about section. Do you have a separate one for this channel?

@vietbubbletea 2 года назад

@@paulp1166 My email is Kambientre@gmail.com

@michaeltrinh2332 2 года назад

Hi, I just ordered the running boards. Where did you get the 3M sealant? I can’t seem to find it on Amazon. Thanks!

@vietbubbletea 2 года назад

@Michael Trinh Here you go! 3M Ultrapro Autobody Sealant, 08302, Clear Color, High-Solids, Heavy-Bodied, Fast-Curing, Solvent-Based, 5 oz Tube smile.amazon.com/dp/B000RVWQ2C/ref=cm_sw_r_cp_apan_glt_i_9BB005PA922RMH7AHMMK?_encoding=UTF8&psc=1

@bbgj28 Год назад

Thanks for your thorough instructions, I installed mine today following your video and instructions from online. But when I was tightening the 7 bolts, 2 of the bolts cracked the running board. I was just at 20lbs torque. So I stopped torquing them and just tightened them until it was enough to me. Did you ever had an issue like this? I wonder if warranty covers it.

@vietbubbletea Год назад

Oh man, I think 20ft-lbs may be too much torque. I believe the instructions mention 7Nm which is only about 5.16ft-lbs. I don't think the warranty will cover it if they know it was DIY. If there's two cracks then maybe they would do an exchange if you mentioned it came in the package like that. Was this purchased at local dealer? Sorry to hear buddy.

@bbgj28 Год назад

@@vietbubbletea oh deym! my bad, i went back and re-read the instructions and i freakin misunderstood it’s 62 inch/lb....not ft/lbs…fak! lol SMH anyway, it feels solid and not loose..crossing my fingers it will hold for a long time..i actually called the dealer and told them the story and the guy i think also misread it as 60ft/lbs lol…he said he’ll talk to his manager, we’ll see

@emilliog-te4fi Год назад

Any issues with the sensors or the 360 view mode? I have a 2022 Highlander hybrid limited. Want to make sure before i purchase and install.

@vietbubbletea Год назад

The running boards are OEM so no issues with sensors for fitment at all, I have a Platinum with all the sensors so you're good.

@wlit 2 года назад

Thank you for the video. Will you be able to install the running board without the Rivnut Tool?

@vietbubbletea 2 года назад

Unfortunately not, the rivnuts are the only way the running boards are primarily anchored and supported to the frame of the car in order to handle the weight when someone steps on it once the bolts are threaded on. If you don't want to buy a rivnut insert tool, maybe try seeing if you can rent one from a hardware store or a tool library if you have those in your community.

@wlit 2 года назад

@@vietbubbletea With the running board installed. Will you still be able to jack up the car using the scissor jack that comes with the car?

@vietbubbletea 2 года назад

@wlit Yes, the bottom of the running board has two cut outs in the plastic molding that gives you access to the front and back pinch weld points where you would normally put jack stands or in case of emergency use, the scissor jack. This also gives plenty of clearance if you take your car for servicing and they use a car lift. If you watch my Michelin CC2 video showing my visit to Costco, you'll see how they lifted my car with the running boards with no damage to my undercarriage.

@Jamal2fresh Год назад

Is there something like this for a 2022 Lexus NX 350 which is essentially a RAV4 😔🙏🙏🙏 anyone???

@vietbubbletea Год назад

There's aftermarket running boards for the 2022 but I don't see any OEM versions available yet for the NX.

@Americasucksnow 2 года назад

I think i will try this. Have a question. Can i put a bull guard with skid plate and rear bumper guards with out them interfering with the sensors?

@vietbubbletea 2 года назад

I don't have much experience with the bull or rear bumper guards but I've seen ebay sellers mention in their product description that it may interfere with the bumper sensors so buy at your own risk if you want to risk messing up the pre-collision detection, dynamic radar cruise or lane departure alert. It may work on lower L and LE trims but I personally wouldn't on my Platinum. The skid plate however may work as I don't don't recall any sensors on the bottom related to Toyota Safety Sense.

@Americasucksnow 2 года назад

@@vietbubbletea thankyou for the the advice. Another question. Any though on a lift kit being added. I would like to have a little more clearance from snow.

@vietbubbletea 2 года назад

@@Americasucksnow Many people have installed 2 inch lift kits with no problems. It's a straight bolt on, just make sure to get an alignment afterwards. Below is a link to a good kit: torq-engineering.com/collections/toyota-highlander/products/toyota-highlander-2-lift-kit-2019-2020?variant=31472459808881 I'd recommend you join the Toyota Highlander Owners Club Facebook group to see pictures from other members who have it installed on their cars. The Toyotanation forums is also a great resource as well. Good luck!

@Americasucksnow 2 года назад

@@vietbubbletea thankyou for the sound advice!

@malayalam382 2 года назад

Hi , I wanted to make sure ,is this the same process to install running board on Highlander xse 2021? Or does it needs different parts number or instructions?Thanks.

@vietbubbletea 2 года назад

The OEM running boards will fit all trims so no extra parts or special processes required for XSE.

@malayalam382 2 года назад

@@vietbubbletea thank you

@brianphan5310 Год назад

Great video , I couldn't inserts the M6 rivnut into the hole , seems like it's bigger, should I buy the M5 rivnut ? Thanks

@vietbubbletea Год назад

Hi Brian, are you using the M6 rivnuts that came in the OEM packaging? If you try to go smaller then the bolts that came with the kit won't fit and you'll create another issue. What year is your Highlander? Find me in our Facebook group if you want to troubleshoot to see what the issue is.

@brianphan5310 Год назад

@@vietbubbletea thanks Thanh ! Got it done by drilling holes just a little bit bigger

@billy5165 2 года назад

Hi Vietbubbletea , please let me which actual size and how many pcs need for Rivet nut to install running board.Thank you.

@vietbubbletea 2 года назад

The eight M6 rivnuts should already be supplied in the parts kit for you.

@billy5165 2 года назад

@@vietbubbletea thank you

@mohammadjawed8386 Год назад

Hello! What about highlander 2023 hybrid limited the instalation is the same ? thanks

@vietbubbletea Год назад

Yes, the OEM running boards will fit all 4th generation Highlander trims for gas and hybrid.

@virginiajohnson5463 Год назад

Is it possible to remove these running boards if you buy a Highlander with them already installed?

@vietbubbletea Год назад

It's possible but it would require additional modification removing the existing crimped rivnuts and purchasing the long plastic trim and grommets. Removing the rivnuts will be the hardest part without damaging the sheet metal of your car.

@AtifAlmoshadq 3 года назад

Can you please link the installation manual for it And do they have an online web to order it ?

@vietbubbletea 3 года назад

Here you go, I've updated the video description to include the link to the instructions as well. drive.google.com/file/d/1EMOc4uZBp8FRm2EkDetyCU0lglrfmo0M/view?usp=drivesdk Regarding where to purchase online, I purchased my running boards directly from the Toyota Dealership but if you live in the US, many people have got them for less than dealer costs from BAM Wholesale online, here's a link: www.bamwholesaleparts.com/oem-parts/toyota-2020-2021-toyota-highlander-running-boards-pt938-48200-oem-pt93848200?c=Zz1leHRlcmlvciZzPWFzc2lzdC1zdGVwJmw9MSZuPVNlYXJjaCBSZXN1bHRzJmE9dG95b3RhJm89aGlnaGxhbmRlciZ5PTIwMjEmdD1wbGF0aW51bSZlPTMtNWwtdjYtZ2Fz

@micahelijah40 Год назад

Do u still remember what size is the rivet nut. My is m6 but little to big to fit in. Do you drill or no. Please let me know. My Highlander is limited awd 2022. Did you forced in then press

@vietbubbletea Год назад

Someone else mentioned the hole being too small for the M6 rivnut, they drilled the hole slightly bigger for it to fit and no issues with the rest of the install. Hope that helps.

@micahelijah40 Год назад

@@vietbubbletea Thk u

@jarmstrongyt 2 года назад

Can you tell us how deep the step on the running board is? I want to make sure I can stand on it and feel like more than just my toes are on it. Thanks!

@vietbubbletea 2 года назад

The running board gives you a 5 inch landing area to step on when the doors are open which is plenty of clearance for your toes!

@jarmstrongyt 2 года назад

@@vietbubbletea Thanks a ton!

@wlit 2 года назад

About the 3M Sealant - the menu said to have 2 inches of clearance around the hole. But when you put the new sealant on, is it still having 2 inches of clearance? Is the hole next to the existing sealant for Rivnut Nut? Do you foresee any problem with "not" removing the existing sealant to install the running board? (like doesn't lay flat to the frame of the car) Thank you!

@vietbubbletea 2 года назад

@wlit I'm not sure myself as the 2 inches clearance can be interpreted a few ways. The existing glob of sealant I removed prior to adding a thinner layer was thick and hard so I imagine that if not removed, could cause clearance issues for the running boards to sit flush against the sheet metal. You could test fit and skip this step to see if you have issues and report back your experience! You will need to install rivnuts in the two holes next to this area (side & bottom) as mentioned in the installation instructions. I hope that helps!

@wlit 2 года назад

@@vietbubbletea That's help. Thank you! Do you need to wait for the 3m sealant to dry up first before putting the running board?

@vietbubbletea 2 года назад

@wlit The 3M sealant has a fast cure time around 10 minutes. Once you apply this and get around to putting all the rivnuts on, it should be good to go especially if you're like me and throw in a 15 minute break to rest your lower back after all the squeezing I did with the rivnut tool. lol

@jjk109 Год назад

Can’t this 3m sealant be bought in stores rather than Amazon? I’ve been looking online and don’t see local store options. Wondering why this would be so hard to get.

@michellepeterson407 2 года назад

What is a reasonable charge for the purchase of the running board, without installation? I could include it in my carloan. thanks

@vietbubbletea 2 года назад

Hi Michelle, most dealerships will charge the MSRP price of $500 just for the running boards alone. I've posted a link in the description of an online wholesaler that sells the same OEM part for $378 plus shipping depending on where you live. See if your dealer is willing to charge this amount but I wouldn't pay more than $450 for it. I hope that helps!

@chefmastermikecmm8465 Год назад

Nice, I found a 21 hybrid platinum that had everything but the running boards. Maybe do the cross bars next!

@vietbubbletea Год назад

If you do, I recommend Autekcomma cross bars. Its stronger than OEM and has locks to deter theft. Here's a review I did on them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fDTguAgTMQA.html

@chefmastermikecmm8465 Год назад

@@vietbubbletea cool thanks! You made buying a newer highlander an easier choice!

@ericajostes2454 5 часов назад

@@vietbubbleteayes! And they have silver that looks way better than the black! 30mins to install

@hon143 2 года назад

Did the actual M6 rivet nuts come with the hardware for the OEM running boards? I'm looking to buy the rivnut tool but trying to figure out if I need just the tool or the rivnut tool plus the rivet nuts.

@vietbubbletea 2 года назад

All hardware will be included for you so all you'll need is the rivnut tool, good luck!

@hon143 2 года назад

@@vietbubbletea Did that plastic flat tool come with the hardware too? Or, was that purchased separately?

@vietbubbletea 2 года назад

@@hon143 You'll need to buy the plastic auto trim removal tool separately if you don't want to use a flathead screw driver. It's cheap on Amazon and comes in handy if you also plan to replace your light bulbs in the future.

@hon143 2 года назад

@@vietbubbletea Thanks! Awesome Dyi video, by the way. I'm going to install it myself too. My local dealerships want $500-750 for the labor alone!

@jjk109 Год назад

@@hon143 my dealer wants $679 to install 😂

@melcoeb 2 года назад

Well done, nice and clear. So you lose the mudguards when you install these?

@vietbubbletea 2 года назад

@Mel Co Nope, the front and rear mud flaps are still there, no need to remove as the OEM running boards provide enough clearance.

@chazmp1989 Год назад

Hi, what size torque wrench did you use? 1/2”, 3/8”?

@vietbubbletea Год назад

1/2 but I also use a 3/8 adaptor depending on the socket I'm using

@unknown-jz3xc Год назад

Can i ask ? Do u know how to remove that rivnut?

@vietbubbletea Год назад

You'll have to carefully drill out the rivnut to remove it from the sheet metal. It's a pain or just leave it in.

@phunguyen888 3 года назад

Does this fit the XLE model? And did you need to buy the installation kit with it?

@vietbubbletea 3 года назад

Hi Phu, the OEM running boards will fit any 2020-21 Highlander trim. All the assembly parts, bolts, nuts, stickers are included in the package. You'll need to get the tools I listed in my video and you are ready to roll! I hope that answers your question.

@martinezfjuan87 4 месяца назад

Is it the same for a 2024 grand highlander?

@vietbubbletea 3 месяца назад

It's different

@fadyzaki9836 2 года назад

How tight are the 7 bolts on the top supposed to be? I know the instruction call for 7 N.M, but the bolts don’t feel tight at all way past that.

@vietbubbletea 2 года назад

Hmmm, not sure why you are having that experience. I have a torque wrench that measures ft-lb so I set it at 5.2 ft-lbs. First, I hand tightened the bolts then used the torque wrench after with no issues. Maybe check to see if yours is not broken if you happened to over tighten a bolt in the past and try a different torque wrench. If there is still a lot of play then something is wrong, I hope you didn't strip the M6 screw holes.

@fadyzaki9836 2 года назад

@@vietbubbletea Yeah, it was kind of weird where I could get every bolt hand tight really good, but after trying to torque it, it keeps turning without tightening.

@vietbubbletea 2 года назад

@Fady Zaki, The more you explain your situation, I'm thinking it may be possible that the M6 rivnuts were not securely crimped to the frame which would explain the bolt still spinning after you hand tighten it. Maybe try reinserting the rivnut tool into the M6 nuts to tighten them further. I know it's going to take some muscle but I have faith in you!

@fadyzaki9836 2 года назад

@@vietbubbletea lol, I will try that and let you know the results.

@goodvibe1053 Год назад

Will a fit 2023 Toyota highlander le ?

@vietbubbletea Год назад

Yes, it will fit all 4th generation Highlander and trims

@jimwiseman8053 2 года назад

I'm going to remove my factory installed running boards on my new 2021 HL and need to buy the black covers that replace them. How many of the holes that originally were attachment points for the black covers get used for the running boards? I think the only problematic places would be if a Rivnut were placed in a mounting hole used for the black cover because trying to drill the Rivnut out and getting all the pieces out of the frame rail box could be difficult. Any other thoughts or suggestions on this project? Thanks.

@vietbubbletea 2 года назад

Oh man, I'm not sure how securely the plastic cladding would stay on the vehicle at higher speeds since 6 out of the 7 holes where the black covers go would have rivnuts crimped into place leaving only one hole to secure the cladding thats located in between the front and rear doors. You would also need to find the white plastic retainer where the wakai nut goes if you intend to replace it. Theres also 6 larger holes on the bottom where two are currently occupied by flag bolts which can be removed before reinstalling the 6 plastic grommets from the original cladding. Can it be done? I believe so... but my honest opinion is it's probably more work just to risk possible plastic flapping while going 60mph. Good luck!

@jimwiseman8053 2 года назад

@@vietbubbletea I was afraid that most of the holes with Rivnuts were needed for the new cladding. That's a lot of hoping you could get the remnants of that many Rivnuts out. Thanks for the reply.

@vietbubbletea 2 года назад

@@jimwiseman8053 After double checking the holes, there's actually 8 holes with 6 being filled by the rivnuts. This would give you the option to put in two plastic clips where the door jams are located at the front and middle of the car with a screw that would secure the cladding at the rear. I definitely would not recommend removing the rivnuts as the sheet metal is pretty thin but a short term fix could be to run a long strip of 3M double sided tape the length of the cladding to help secure the cladding to the metal.

@jimwiseman8053 2 года назад

@@vietbubbletea thanks for looking into that for me. I think your idea of double- sided tape might work especially since there would be other OEM fasteners in there, too. Does it look like it might be possible to sand down or otherwise reduce the size of whatever pushes into the slots so they would push into the Rivnuts?

@vietbubbletea 2 года назад

@@jimwiseman8053 I don't think sanding would be necessary if you take out the 6 white plastic clips from the cladding where the rivnuts currently exists and use only 2 of them. Those clips actually take up minimal space in between the cladding and metal so once removed, the double sided tape can be used to fill in that space as I would leverage those 6 contact points to secure the double sided tape over the existing rivnuts. If you go to the 4:40 mark in my video, you'll see the access points I'm referring to where the white retainers are. Hopefully that makes sense.

@purnamagum 12 дней назад

Only confusion is at the bottom screws. Unable to figure out it. Please help

@vietbubbletea 12 дней назад

Download the instructions I've linked in the video description and follow Fig. 5-4 and 5-5 to see where the four bolts on the bottom thread in. You'll need a 10mm deep socket and 6" extension to tighten those bolts I from the bottom.

@EdwardxMarquez 2 года назад

How can i get the installation directions? I habe a 2016 but i cant find the instructions, can you help me!!

@vietbubbletea 2 года назад

Here is the instructions for the 3rd generation Highlander: drive.google.com/file/d/1ZftYOjZV0kseyY4JW57UPBpKRGptPO3r/view?usp=drivesdk

@hanihasan964 2 года назад

Thank you so much that was very helpful.. how can order them, please help.

@vietbubbletea 2 года назад

Thanks, you can get these OEM running boards from your local dealership, they are $500 MSRP but I wouldn't pay more than $420 for them. If you live in the US, you can buy them at the link below with no tax or shipping costs when you enter the FREESHIP code: parts.liatoyotaofrockland.com/p/Toyota_2021_Highlander/Running-Boards/92744916/PT93848200.html

@thendino1 2 года назад

@@vietbubbletea Hey you live in Rockland? Me too!

@vietbubbletea 2 года назад

@@thendino1 I actually live in Seattle but Rockland had the cheapest price for Toyota parts!

@bryanjamesasuncion5055 2 года назад

brother i have a 2022 highlander, i was wondering if that running board will fit my car?

@vietbubbletea 2 года назад

Yes, the OEM running boards will fit all 4th Gen Highlanders and trims between 2020-2022

@bryanjamesasuncion5055 2 года назад

@@vietbubbletea thank you sir👌👍

@dcruzer1272 Год назад

I’m sure the sealant is to stop any vibration.

@americanmade422 3 года назад

What size of revit did you use on this?

@vietbubbletea 3 года назад

Size M6 rivnuts, they're supplied in the running board kit for you.

@leygonzalez336 Год назад

I just bought Xse trim ,can I install it on mine as well ?

@vietbubbletea Год назад

Yes, OEM running boards will fit all 2020-2023 Highlander trims

@grace42841 3 года назад

What is the name of the tool or clamp that I use for the holes?

@vietbubbletea 3 года назад

Hi Grace, its called a Rivet Nut tool to install the M6 rivnuts, I've provided a link to something similar to what I have for your reference. www.amazon.com/dp/B091THBB73/ref=cm_sw_r_cp_apa_glt_fabc_DEH8391X1GGQJF4CGW6F?_encoding=UTF8&psc=1

@grace42841 3 года назад

@@vietbubbletea thanks!!!!😉👍

@jasonp209 Год назад

Do you really need to used 3m sealant clear

@vietbubbletea Год назад

I've heard that others skipped the sealant with no issues. You can try doing a dry fit of the runningboards to see if there is enough clearance between the sheet metal. If so, you can skip it too.

@malayalam382 2 года назад

Hi ,how to download installation instructions for mudguard or mudflap on Highlander 2021.

@vietbubbletea 2 года назад

They should be direct bolt-ons to existing holes on the frame.

@malayalam382 2 года назад

Do you have any video about it ,coz it came with hardware too so I am wondering how to put it on.

@vietbubbletea 2 года назад

@@malayalam382 I don't but you can check out the Toyotanation forums, here's a link to download the OEM mud flap instructions. www.toyotanation.com/threads/2021-limited-oem-mud-guard-installation.1696450/post-14411288

@al5941 21 день назад

Do you live in Florida near West Palm Beach? I could use your help.

@vietbubbletea 21 день назад

I'm on the west coast in Seattle, Washington. What step did you have questions about?

@roleywong954 4 месяца назад

I have 24 xse awd do I have to scrap off that glue

@vietbubbletea 4 месяца назад

Some people were able to install the running boards without removing the glue. Just give it a test dry fit to see if you have clearance to confirm.

@roleywong954 4 месяца назад

@@vietbubbletea does it matter what rivet nut tool I use ?

@vietbubbletea 4 месяца назад

@@roleywong954 Using a rivnut tool with a shorter handle like the one I used will help you crimp the rivnuts closer to the door hinge. You could use a longer handle but may not have the same clearance to fully press them together.

@JuanPSolis-fg3pt Год назад

Does it fits on 2023 XSE?

@vietbubbletea Год назад

Yes, it fits all 4th generation Highlander and trims

@user-gy2fj1ld5g 5 месяцев назад

Not to promote a product, I purchased on Amazon from Snailfly running boards for 2020 to 2024 Highlander all models. Included in package was rivnut kit and crimper tool. Cost - $ 269 and free shipping.

@jamellamckinley3895 2 года назад

Do you think this will work for a 2022 Highlander?

@vietbubbletea 2 года назад

Hi Jamella, the OEM running boards will fit any 2020-2022 Highlander regardless of trim level! Just reference the part number in the description and you'll be golden.

@jamellamckinley3895 2 года назад

@@vietbubbletea thank you for your reply

@user-um9md9ug5j 2 года назад

Hi, at the Toyota dealership I purchased my vehicle they disassembled the plastic that was to install the sidewalks, I decided to disassemble them and go back to the source, can you help me with the issue and tell me what the catalog number is listed on them so I will try to purchase and install them again . Thank you very much for your help

@vietbubbletea 2 года назад

I'm not sure if I understand your question... are you planning to install or remove the running boards? If removing, are you trying to install the black plastic rocker boards back? Is this what you're looking for? Buying it brand new is too expensive and not worth it if you ask me. www.ebay.com/itm/284700445524?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=KozgzqBESAK&sssrc=2349624&ssuid=RII2UzJBTAm&var=&widget_ver=artemis&media=COPY

@user-um9md9ug5j 2 года назад

@@vietbubbletea Hi, I have dismantled the sidewalks and I would like to return the situation to its original state, as the vehicle came out of the car dealership, do you have any other idea how to handle this issue? I would love to get advice from you. Thanx Zvika

@vietbubbletea 2 года назад

@@user-um9md9ug5j Hi Zvika, is the ebay link I provided what you are looking for? You should join our Facebook group so you can post photos of what you are talking about so I can better understand and help you.

@user-um9md9ug5j 2 года назад

@@vietbubbletea yes, this is exactly what I looking for, and Im sorry but I don't have Facebook.

@user-um9md9ug5j 2 года назад

@@vietbubbletea hi Ton I went today to my Toyota dealership and I asked them to bring me back the plastic Rocker Panel Guard they took of and put the step rails, im waiting for answer Next week and will let you know, any way thanks a lot for your help and Patience.

@charlesdavenport7520 Год назад

I just watched the video again you said that the two nuts go underneath the running board and get attached to the flag nuts. And then you said the two bolts go underneath the running board where?

@vietbubbletea Год назад

Hi Charles, I'd recommend downloading the instructions in the video description that I've provided for a better visual. The nuts go on the flag bolts and the other bolts go directly into the frame of the car securing the bottom of the running boards, I hope that helps.

@charlesdavenport7520 Год назад

So did you buy your Highlander through Costco auto buying or did you go to a dealership on your own

@vietbubbletea Год назад

Went online through the Costco Auto Program, a dealership with contact you based on your zip code. Asked for their invoice and Costco pricing sheet as I shopped around.

@charlesdavenport7520 Год назад

I went to a dealership.