2020 MacBook Air M1 a2337 LCD panel replacement guide - Full process 

I see that you left the black rubber seal in position while you removed the old panel whereas everyone else seems to remove it straight after removing the bezel. Interesting, I might try that next time. Thanks for the video, it's good to see how others do this repair.

tq bro for the guide, i almost finished repairing my macbook air lcd.. TQVM

thank you

Good job 👍

Incredible! This is the first person from RU-vid who did procedure to replacement lcd display perfect, quality and professionally! Thank you!! Greetings from Russia!!!

Very skillful. Thanks!

I crunched the screen on my Macbook and I was able to change the screen by doing some specific things. First get all the various screw drivers you will need and can find out about on this space. Set up a padded area on which to work.Screws bounce on hard surfaces and are a bitch to find. Third, get a series of small cups and place them exactly where you take screw out and mane notes. Take pictures. And follow a good RU-vid video

Where can I buy the replacement panel by itself? I seem to be getting a lot of the replacement panels with the housing. Any suggestions?

Hello, great video! I have succesfully replaced the LCD but now encounter these issues - there is a bright neon green dead pixel, the screen sometimes flashes very slim red lines on dark areas of the LCD (especially noticable on black). Is this a manufacturing defect or have I done something wrong? The LCD cable does have a small ding on it.

What is the name of the tool that you use for separate the panel? The plastic one 😊

Hey thank you for this video! This might be a noobie question but what type of tape did you use? Would you have a brand name or a link to recommend? I am trying this repair on an m1 macbook pro 13" Thanks in advance

hi!! outstanding job, dude! please, tell me: which temperature and air flow you're using at 18:23? (I'm scared to kill the backlight layers). Your method is very impressive: you prevent from damage the light sensor and web camera! thanks in advance!

Did you test the camera?

I was told if I just buy the LCD and replace it on a a2337 it wont work because of software (MacOS) similar to on iPhones. Is that true? I am capable of this repair but idk if it will work if I just replace the LCD panel

is the outer glass cracked or only the lcd is cracked?

I could successfully replace the LCD using your method, thank you very much. It is very difficult and time consuming. I have only one thing, when I move the lid back and forward, I can hear a little click on the left side. I moved the black plastic down and it got better. But I can still hear it. If I open the lid to his max, and then when I close it, there is no clicking sound. Do you have an idea, why this happens? My LCD display came preinstalled with the metal bracket, so I did not remove and reinstall it.

Has anyone bought a Display on Aliexpress and has it turned out well? Do you have the purchase link?

What is the name of that circular tool you use for removing the trim?😊

What temperature and air flow setting do you use? Thank you

great job, what type of tape did you use for this work?

just did this replacement. the issue i have is the lower lcd is bulging out keeping the lid from closing. i noticed that when i installed the lcd bezel but hoped it would work. Now i know there's zero tolerance for any bulge lol. So now the lid doesn't stay closed, and because of that the display doesn't come on after trying to close it. i'll be watching through your video again and others looking for any clues to why the lcd didn't mount properly. i also remember when installing the tiny lcd screws, i had to push down a bit to start a couple screws. i know now that is a red flag to stop and check everything

Will changing the lcd in this way let the screen keep the true tone functionality?

Do you have any tips for removing the lcd if it already has cracks?

Same problem buying a display a 13 " MacBook Air from apple South Africa which was used a display one with a warranty for 6 months. 3 months later got a black square on the top right inside of the screen .weird ?Called my contact there to let him know and he was quiet surprise.Then a cracked appeared for the blackspot and crossing the screen to the other side.great so the top of the crack washing an image and the bottom black....brought it there and of course ,my fault and no trace on the body as falling down or impact.actually its like an internal crack and not on the glass and when I brought it there the battery was not working properly and to be changed.Apple is full of crap and specially being a good customer , they did nothing .happy to see that its definetly a defect on the part as they did before with other series....my MacBook Pro 16' a fuck up as well.but the 2014 series are old but still holding on ,except for upgrades.as for usb connection as 2 and faulty , ridiculous and of course they gave me along a Adam adaptor which supposedly a good brand and gone in 2 months as for most of connections .