2022 9 CH AVR BUYING GUIDE | 7.2.4 | Dolby Atmos | DTS:X

Подписаться 42 тыс.

Просмотров 53 тыс.

50% 1

Is this the year you’ll get a 9 channel AVR?! Well, it’s not just Denon and Marantz (although I do cover those brands, too). Check out the video for all the options out there! Woohoo!
Onkyo TX-NR7100
Amazon - amzn.to/4aNA9Uv
Pioneer VSX-LX305
Amazon - amzn.to/3NQPk5B
Integra DRX-3.4
Amazon - howl.me/ckSHJ5ZR0BP
Onkyo TX-RZ50
Amazon - amzn.to/48olspq
Denon AVR-X3800H
Amazon - amzn.to/48G62MX
Pioneer VSX-LX505
Walmart - howl.me/cirajNtHoFN
Denon AVR-X4700H
Amazon - amzn.to/41QznC7
Integra DRX-5.4
Amazon - amzn.to/3TOy7xr
Yamaha Aventage RX-A6A
Amazon - amzn.to/47nFChR
Denon AVR-X4800H
Amazon - amzn.to/3NMfiaw
Marantz Cinema 50
Amazon - amzn.to/3NQ5Bro
NAD T 778
Crutchfield- howl.me/ciravTkMq9C
Arcam AVR11
Crutchfield- howl.me/cirax0wRnbB
=============================
MY HOME THEATER SETUP
=============================
65” LG C1 OLED TV
Crutchfield - howl.me/chNr9ONsB1Q
Amazon - amzn.to/3lTcHMQ
B&H Photo - bhpho.to/2SDJpYg
Marantz SR7015
Crutchfield - howl.me/chNr9OFKp3N
Amazon - amzn.to/3F1VmcZ
B&H Photo - bhpho.to/3p9zWpb
Outlaw Audio Model 7000x Amplifier
Amazon - amzn.to/3NO6oGZ
Peachtree Nova300 Stereo Integrated Amp
www.aperionaudio.com/collecti...
Emotiva BasX A3 Amplifier
emotiva.com/collections/amps/...
FRONT LCR
Aperion Audio Verus III V8T Towers
www.aperionaudio.com/collecti...
Aperion Audio Verus III Grand V6C Center Channel
www.aperionaudio.com/collecti...
FRONT WIDES & VOICE OF GOD
Aperion Audio Novus Slim N6SC LCR
www.aperionaudio.com/collecti...
SURROUNDS
Aperion Audio Verus III Grand V5B Bookshelf
www.aperionaudio.com/collecti...
SURROUND BACKS
Aperion Audio Novus N6T Tower Speakers
www.aperionaudio.com/collecti...
ATMOS HEIGHT SPEAKERS
Aperion Audio A5 Height Module
www.aperionaudio.com/collecti...
LG UBK90 4K Blu-ray Player
Best Buy - howl.me/chNr9OziN0X
Amazon - amzn.to/2UtSnZ0
B&H Photo - bhpho.to/3zeOg1G
AppleTV 4K (4th Gen)
Target - howl.me/chNr9OzNkRT
Amazon - amzn.to/3kGQ1R9
B&H Photo - bhpho.to/3eCueWU
Nintendo Switch
Target - howl.me/chNr9OyO7uf
Amazon - amzn.to/2Tqra96
B&H Photo - bhpho.to/3x2Ea2B
14 AWG Copper Speaker Wire
Amazon - amzn.to/3cmGoCP
B&H Photo - bhpho.to/3dqdVMc
Monoprice Low Profile 22 Lb Capacity Speaker Mounts
Amazon - amzn.to/3ckelDM
=============================
MY VIDEO GEAR
=============================
Audio Interface - Focusrite Saffire Pro 40
Amazon - amzn.to/3stZ6y0
Sennheiser MKE600
Amazon - amzn.to/3slMidQ
B&H Photo - www.bhphotovideo.com/c/produc...
Sony A7 II Full Frame Mirrorless Camera
Best Buy - howl.me/chNr9OV8FEQ
Amazon - amzn.to/3GJqFty
B&H Photo - bhpho.to/3GLtnik
DJI OM 4 SE
Best Buy - howl.me/chNr9OV8FEQ
Amazon - amzn.to/3zXAYcY
Shure KSM32 Cardioid Condenser Microphone
Crutchfield - howl.me/chNr9OEjHIG
Amazon - amzn.to/2QEVuLr
B&H Photo - bhpho.to/3dpC3yQ
XLR Male to Female Microphone Cable
Amazon - amzn.to/3lYz1ED
B&H Photo - bhpho.to/2U6ikNH
JOILCAN 81" Tripod
Amazon - amzn.to/3hn7RoS
B&H Photo - bhpho.to/2Ua1LAr
=============================
LINKS
=============================
Everything you need can be found at the link below! Woohoo!
linktr.ee/ealanosborne
#hometheater #buyingguide #dolbyatmos
=============================
DISCLAIMERS
=============================
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites

Наука

Опубликовано:

4 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 174

@eddieleeparto7553 Год назад

Great video, Ealan-sir! I appreciate that you're aware of us entry-level HT enthusiasts when comparing subtleties between AVR's; while reminding us to buy what makes sense to "me." Best-of-the-best is great, yet useless to pay hundreds more for features I haven't and won't use. A 5.2.4 video would be cool. I vote for that one! Thank you, and cheers from Winnipeg, MB, Canada!

@robognu5000 Год назад

I’m so glad that I got the x3600 when I did. It does all that I need and I only paid $700 because it was the outgoing model. Hoping to use it for many more years before I “need” to upgrade. 7.2.4 is great!

@anthonyperez_audiophile Год назад

Great comparison video. Every one of these models haunt my browser targeted add space as I have researched them so much. With the size of my room 12x12x8 I don't see needing pre-outs however they are nice to have. The RZ50 is still at the top of my list. Worth noting the Onkyo 7100 also comes with Dirac.

@nafnaf0 Год назад

Onkyo also includes built in support for Qobuz, which many don't have and can be nice

@jaredb9281 Год назад

This was very timely as I'm right in the middle of searching for a 9.2 receiver. I can't believe they're selling the SR6015 for over $2000! It's priced at €1500 here in Finland, but on special for €1299 right now, which is the same in US dollar, so a complete steal compared to the US. It's £899 in the UK, which is just north of $1000 USD!! Your price looks more like the SR7015 price?! The Marantz Cinema 50 are on preorder here for €2000. Things are NEVER cheaper in Europe than the US! 😆 I think some retailers are riding the 'inflation' excuse, and fleecing you guys! Great vid sir! Cheers! 😃👍🏻

@ealanosborne Год назад

I totally agree! I remember when the SR6015 was $1,500! What happened?! 😄 Thanks for tuning in from Finland! 😁🤘

@ealanosborne Год назад

I totally agree! I remember when the SR6015 was $1,500! What happened?! 😄 Thanks for tuning in from Finland! 😁🤘

@bringmeyourweak Год назад

Make home audio cheap again.

@brettcolliton1058 Год назад

Was it ever cheap?

@jimross2101 Год назад

@@brettcolliton1058 Yes

@MrViper7121 Год назад

I don't think it was ever cheap to begin with. It's worth the cost for those who seek the best performance.

@o.c.g.m9426 Год назад

Not gonna happen. Between COVID & the cost of a movie ticket people(like me) would rather spend 1 or 2 grand to fix up my own home theater. I like rewatching matrix 1-3 or Terminator & Beverly Hills cop & Predator

@Audiomainia2310 Год назад

When was multi channel home audio cheap? Never. You got what you pay for. Everybody wants a Mercedes for the cost of a cheap Hyundai.

@craigosterberg5045 Год назад

Thanks for the review.

@supernova82 Год назад

Very useful video. It gave me a good idea of how to look for AVR.

@ealanosborne Год назад

Awesome! Glad I could help! 😊🤘

@miscreant1739 Год назад

I think you missed that the cheapest TX-NR7100 has full range Dirac Live room correction which is a huge advantage over the current Denon/Marantz receivers. Dirac Live also corrects the subwoofers so in many cases you don't need a separate minidsp 2x4HD. Also I think pre-outs are not needed for most people unless they have speakers with very poor power sensitivity. I have a 3200 cubit ft room with 9 Emotiva speakers with 85dB sensitivity, the front/center speakers are rated at 4ohm and my surrounds and atmos are 8ohm. I have no problem driving them to uncomfortable levels on the TX-NR7100.

@nucks4cup75 Год назад

It has Chromecast too

@rymack5715 Год назад

This comment makes me happy! Just bought the 7100 a few months ago (loving it so far), and I’m looking to upgrade at least my front sound stage within the next year. I’ve been worrying that I’d be very limited with what I can drive with this AVR and no pre-outs…

@bryanguest2807 Год назад

I just bought a denon 760h 5.1.2 for $350 refurbished. Good luck beating that. The extra 2 height channels would be nice for my setup but not at that price range

@psyphonyxaudio Год назад

Nice list and overview. Many people will benefit from this list. I got my x6700H last year ..and I am seriously looking at the x3800H and going with external amps for the heights.. Grrrr...

@ealanosborne Год назад

Thanks, dude! X3800h is a winner for sure, with support for 4 subs and Dirac (if you wanna pay the extra $). 🤘

@sebastian7539 Год назад

@@ealanosborne one thing I’m concerned about is I’ve been having issues with my X3700H pushing enough voltage for my two Monolith 16 subs. I wonder how the power is partitioned for four sub outs. As someone who has gone the minidsp 2x4hd route, this is no longer relevant to me but something to think about if you plan to run some big subs.

@RahzAlGhul Год назад

Why you looking at a 3800 over 6700 you can do 13ch on the 6700 when you’re limited to 11 on the 3800? Is it just because of the Dirac and 4 sub option?

@801Pizzle Год назад

Love your content. I'd love to get your take on if it makes more sense to buy a cheaper amp with lower power and use the preamp outputs with a separate amp or break the bank and go with something more powerful? Wired my theater room for 7.2.4., so that's how I found this video.

@ealanosborne Год назад

Oh if you’re plan is to go with external amps anyway, go with the cheaper option, since the internal amps’ power ratings are negligible at that point. It’s best to make an AVR work less at powering speakers, because then it will process audio better, not having to perform so many tasks at once. 🤘

@franklynlindsay2728 Год назад

Hey Ealan great video love the content, is it possible you could do a review on the new Emotiva BasX MR1

@ealanosborne Год назад

Trying to get that locked down… 🤞

@paul11494 Год назад

I am thinking about getting the emotiva mc1 processor and a few old av receiver with surround line in like the Yamaha htr 5760

@DanielKinuthia Год назад

All of those require an external amplifier to use the full 7.2.4 Dolby Atmos setup. I'm thinking of going with Yamaha A8A. It can process 11 channels at once, has all the features I require. it received the updates to HDMI 2.1 and the only thing missing from it is Dirac and Imax enhanced. its costly at 3500 so I'm still checking.

@miscreant1739 Год назад

Dirac is honestly huge. I learned so much by playing with it and I'll never buy another system without it unless something better (and still affordable) comes along.

@wipatriot510 Год назад

Just ordered an Onkyo TX-RZ50 to run a 5.1.4 setup...I already have another amp, the Marantz NR1200 that I will use to power the surround back for a 7.1.4 setup, just have to decide what I want to use for surround back speakers, I'm thinking of getting a pair of SVS Ultra Surrounds, and running them in DUET mode, allowing them to be my surrounds, and my surround backs... I'm currently running a Onkyo TX-NR696 in 5.1.2, with KLH Model 5 as main fronts, and Polk Audio everything else(center, sub and surround), and for front height I'm using a nice little set of Pure Resonance Audio MC2.5B Dual 2.5" which are fantastic for height speakers, and I'll be using another pair for rear height as well...

@nucks4cup75 Год назад

I believe yes, the new x3700h has changed their HDMI chipset. But you still have the issue of only ONE 8k/60 4K/120 VRR ALLM port, basically just replacing the one you lost on your TV by using the E-ARC port.

@rogerayer6731 Год назад

Great video just to let you know any Marantz or Denon 2.1 issues were resolved since spring of 2021 with new Chips. There should not be any more of those in the market if so Denon made available a free box if your game console will not work. You can tell by the serial number I think it was the last four digits there were 7,000 or above but you can check that with Denon. Now they have lowered the price of the x3700 as a close out to 1199 which was its original launch price

@ealanosborne Год назад

Yeah, man! I just posted about the x3700h price on my community page today! Still a great deal for all you get, especially since the HDMI 2.1 issues are over. 🤘

@NikoAbston Год назад

after having gone mc1 and dual a7 - i can’t imagine going back. still came out less than a 8500ha

@vinylmonster4907 Год назад

I thought id ask a question about AV receivers, hopefully you can shed some light. I want to, if possible connect my old VSX-933 to my new Pioneer LX-505 for additional amplification and to relief stress on the LX505 until i can scrape up enough cash to purchase a proper external power amp like ToneWinner AD-7300PA. So, can it be done (connecting the LX505 to the VSX933) and how can it be done? I'd appreciate you sharing your thoughts.

@Lighthouse3D Год назад

Ealan, what are your thoughts on a front height and top middle configuration? For 7.2.4, the rears for my surround backs are slightly higher than ear level to accommodate the couch, so in my mind this seemed like the best combo, I don't ever see anyone talk about a heights and in ceiling combo, I always see one or the other

@ealanosborne Год назад

I think Techno Dad recently did a video about combining height and in-ceiling speakers, which turned out great, in his opinion! I don’t see why top middle and front heights wouldn’t also be a killer setup. 🤘

@ranjithcn Год назад

Awesome video! Thank you for the indepth comparison. Onkyo has been in the news lately about filing bankruptcy. With that being said, is it safe to buy Onkyo products?

@ealanosborne Год назад

Yep! Filing for bankruptcy for a large corporation like that usually doesn’t mean the end. More of a strategic move to start fresh. Pretty sure they just got bought by some large company with lots of capital, so they’re doing just fine.

@Kevin-ix4qz Год назад

I'd be looking at the previous models from marantz, or look for a demo model if you want a deal

@Lordvoldemore Год назад

I feel like my Costco yamaha is one of those with bugs. I keep getting constant black screens or loss of audio or sometimes it won’t display my Apple TV until I reboot it.

@sonnixlink Год назад

Thanks for the video. Would you consider doing the same format looking for a 9 Ch reciever on ebay?

@ealanosborne Год назад

Sure! I mean there’s always a gamble with previously owned products or ordering on eBay in general, but the same goes for Amazon, too. 🤷‍♂️ If you find a great deal, and it’s a highly rated seller, go for it!

@neomatrix2722 7 месяцев назад

Hello thank you for your review I have two questions I have to let you know I'm a complete noob I have bought the Klipsch speakers with one sub and the onoko 7100 receiver. 1. Can i not splice lfe output to have 4 subs? ( native ican have 2) q2. Can you explain more what 100w to channel means I don't really understand that thank you for sharing your wonderful knowledge

@ealanosborne 7 месяцев назад

Something you might want to look into is a MiniDSP 2x4 HD. You can take one subwoofer output which can expand to 4 subwoofers. But the most important part is that you can make adjustments to each subwoofer individually. Maybe one is closer to a wall than another. Or maybe you have 2 completely different subwoofers that need separate tuning. If you split a subwoofer signal, you can’t make adjustments to each subwoofer individually, since you’re just splitting the same signal in two. Make sense? And also, 100 watts per channel means your receiver can output up to 100 watts to a speaker - but the catch is that number almost always means with only 2 channels being powered. If you’re powering 9 speakers simultaneously, you’ll most likely get something like 50-60 watts per channel, since it’s very taxing on the receiver. So it’s just a number to give you to make sure your speakers can handle that much power, or else you’re at risk of damaging your speakers.

@ekjellgren Год назад

OMG can a site just give you a way to filter these properties? Auro3d for instance isn't available on Crutchfield.

@junflores7143 11 месяцев назад

Hi Elan. I’m torn between Integra 5.4 or Onkyo RZ50 or Pioneer LX-505. Please I need your advice. Many thanks and more power 🙏

@ealanosborne 11 месяцев назад

They’re all under the same umbrella company, but: 1) Integra is their home integration products, so if integrating into a whole home audio system AND home theater is important, go with the Integra 5.4. Pioneer is their music-leaning product line, so if you listen to music at least 50% of the time on your system, go with the 505. If you just need kickass audio for movies and TV, go with the RZ50. Hope that helps! 😁🤘

@Music-Matters Год назад

There is a 9 channel receiver that lists for $799 that can do 5.1.4. It is the Pioneer Elite VSXLX304. Not sure how much of a step down that is or if just sacrifices too much. Were you aware of this one?

@ealanosborne Год назад

True, I just wanted to hit the available AVRs that are the latest models. The 304 is just the 2019 version of the 305, so it supports 4K and HDMI 2.0, but not 8K and HDMI 2.1, etc. But if you’re not much of a gamer, 4K and HDMI 2.0b is all you need still for many years to come!

@davidbrooks8061 Год назад

I'm looking at either the Onkyo RZ50 or the Integra TX 5.4. Do you feel the Integra is worth the extra money? It has a better power supply I believe.

@ealanosborne Год назад

Meh…I’m not too familiar with the Integra, although Onkyo, Pioneer and Integra are all part of the same corporation, so I imagine they’re very similar. But the RZ50 is wildly popular, so I’m leaning towards that just because I haven’t seen much on the Integra 🤷‍♂️

@anildesantis4434 Год назад

Since it has been metion many times, what channel is better to power with the extra 2ch amp? (Front/rear/side or high1/high2) Or is better to take in consideration a 4ch amp to power all the atmos (and obtain a more balanced power)? Any suggestion for model/brands.

@ealanosborne Год назад

You can go a number of ways, depending on what you prefer, really. Many might utilize a high-power 2 channel amp for their front L/R as a hybrid home theater/stereo HiFi system (if they listen to music a lot as well). 2-channel amps are plentiful out there since there are many HiFi stereo enthusiasts who might have large tower speakers integrated in their HT system as their front L/R. Just depends on their budget. Budget conscious people might want to power their front LCR with an external amp (like the Emotiva BasX A3, which is wildly popular) since they might have fairly decent speakers up front that can handle up to 150 watts (since the BasX A3 is rated at 140 watts per channel). But you can definitely use a 4-channel amp to power 4 heights right away. Although that would be my personal last choice, since I would most likely power the heights externally last (if I'm upgrading over time). If I had an external amp plan laid out, I would start with LCR, then power surrounds/surround backs, then heights externally, slowly adding those external amps over time as to not push my bank account to its limits. 😄

@nafnaf0 Год назад

I think most people get a nice 2 channel amp or integrated amp for the front two speakers (front left and front right). This can double as your dedicated stereo music system. Surrounds and overheads especially typically don't require as much power as the fronts.

@Lozin80 Год назад

I just picked up the Denon X4800H, my first Denon. I’m looking forward to getting it up & running

@ealanosborne Год назад

NICE!! Which configuration are you going for?

@Lozin80 Год назад

@@ealanosborne I’ve been running 5.2.4 since 2015 and like you mentioned in the video it’s all I have room for at the moment. In the future I plan on moving my basement setup to the other side of the house where I’ll have 16 feet to play with instead of 8 currently. At that time I’d like to go 9.2.4 but that will require another amp and some external power for sure.

@ealanosborne Год назад

@@Lozin80 Sweet! Well that x3800h will last you many years to come! 🤘

@K_R_one Год назад

I have the Sony STR ZA5000ES 9.2 I know it is a older model. But no one gives it love. Everyone just talked about Denon, Onkyo, Marantz. I have no problem with my Sony.

@ealanosborne Год назад

I was considering going over some older 9 channel models, but this video was already getting a bit long. 😄 That Sony is good, though!

@richardsonaliya9746 Год назад

Very nice video man.. can you make a video - best avr for small system like 3.1 or someting. A lot of people use this kind of set up for their living room. I have 3.1 set up with Martin logan 40i and 30i with svs pb 1000 pro. I am having hard time to choose reciver .. I am using onkyo tx nr 6050 but it's 90 watt ftc. I need more power not more Chanel 😪. And it do not have pre out also . Got this avr from Costco at 400$ so nothing can beat this price range .. avr with atlist pre out for ftc and out put hdmi 2.2 . If no pre out then power like 150 watt at 8 ohm ftc.

@ealanosborne Год назад

That was in my 2022 Wish List video, to have more powerful options for 3.1, 5.1, etc. Unfortunately manufacturers still haven’t jumped on board to accommodate those like you and I who would appreciate a powerful 3.x system. The other unfortunate thing is that the AVRs or preamps that do have more power only come with 9 channels or more. 😭 Since you want more power, you might look into inexpensive preamps, like the Emotiva MC1 (which is currently on sale for $799) and a BasX A3 amp. I know the channel count is overkill, but you can still have a more powerful system and still have the option of expanding if you so choose? 🤷‍♂️

@chiefmegadeth Год назад

Problem is 9 channel receivers in Australia are about $2600 or more on average. So now that I just upgraded my speakers, i have to wait before I get a new receiver. Plus I game on series X, so I need that VRR ALLM and full HDMI 2.1 with dolby vision and 4k hdr at 120fps as well.

@hillbuy14 Год назад

What do you think about the emotiva MC1 paired with a basX A3 and A7 for around $2300?

@ealanosborne Год назад

Excellent! At least on paper. I hope to FINALLY get my hands on an MC-1 in the next few weeks. 🤞 I’ll definitely give it a full review at that point!

@ranjithcn Год назад

Is it safe to overpower a speaker? Say for example I have a Klipsch R625FA and R-52C (for the center channel) and I want to connect these speakers to a Monolith 3X200W amp. The speaker's spec says 100W Cont and 400W Peak. Am I safe to attach this amp or should I have to underpower the speakers with an amp that matches the speaker spec?

@ealanosborne Год назад

Yes. You’re good powering your speakers with that amp. Check out this forum for more info, too. 👍 forums.audioholics.com/forums/threads/overpowering-speakers.72577/

@michaelburton5198 Год назад

Best Or Great Home Theater 🎥 🤔 Surround Speakers 🔊 1 Should Get For Movies 🎬/ Music 🎶?????

@schemkesa Год назад

I pullen the trigger on a new Marantz SR6015. Great receiver and all 11.2 pre-amps out! Still my system is 5.1 and in fact right now 5.0 because my sub (SVS) is in repair. It does sound very good right now I must say and don't mis the SUB for music at all (yet) Front speakers are 2 big B&W 604 S3. My question is, is it worth buying some Atmos speakers because I don't have a BluRay player (yet) and Netflix basic. So no Atmos available here on our TV channels and or RU-vid. There are tons of Atmos videos on RU-vid but as far as I know RU-vid doesn't support Atmos streams

@DustyOne Год назад

I'm sending my 6015 back to Marantz today because it was buggy.(Random loss of sound, receiver would go flash on and off when RU-vid adds popped up, shut down TV and AVR and other issues) Coming to the end of the 45 day trial. Building a 5.1 system with SVS Ultra Towers, Center, and Elevation. Used the 6015 to Bi-amp the Towers. Need to find a replacement? Did you try any of Ealan's video AVR's? At least I know how the 6015 would sound.

@schemkesa Год назад

@@DustyOne thats a bummer. I'm glad that I haven't had any issues so far. Though that HDMI protocol is difficult to understand. No haven't tried anything of those mentioned. I thought Onkyo was dead due to HDMI board problems? Anyway here in Europe. Denon is great 👍, and Yamaha don't trust them anymore, because that was my former receiver that died on my after 8 years and couldn't be repaired. Again HDMI board that broke down.

@sarvasrikant Год назад

Great video. I have a one off question about choosing/expanding the speakers. I looking to expand my existing speaker setup to a dedicated home theatre room. Currently I have Polk's 4 - T15 for front and rear, T30 for center channel. I am thinking to buy T50 towers and VT 60 ceiling speakers to expand it to 7.2.4 setup. Do you think its a good idea or to start over all together? Budget is not a great deal but I saw your other videos too!

@ealanosborne Год назад

Yes! I would say to stick with Polk so your speakers are timbre-matched. Best to have all the same brand. I’m sure you’ll be satisfied with a 7.2.4 Polk system for quite some time. But I’m sure eventually the home theater bug will bite again and you’ll want to upgrade your speakers again. 😄

@sarvasrikant Год назад

@@ealanosborne thanks. And yes I know about the bug 🤪. But does the T30 Centre speaker good enough for a dedicated system? Or is there anything else i can match this system with? 4 T15s will be my surround speakers and T50s will be front.

@ealanosborne Год назад

@@sarvasrikant The T30 should be fine, since it’s in the same tier as the T50 and T15 speakers. Although if you had the budget for it, the Signature Elite ES35 would be an upgrade, since a lot comes out of your center channel. 🤷‍♂️

@sarvasrikant Год назад

@@ealanosborne yep, thanks. Sorry for a newbie question then, doesn't tier matter? that way i can plan for better front towers as well! and what would you recommend for subwoofers? right now i have the PSW108 10" Powered Subwoofer. And looking for an upgrade there too! (2 of them). So keeping my 4 surround as T15s and rest for an upgrade

@ealanosborne Год назад

@@sarvasrikant Yes, being in the same tier is best, since they will all have roughly the same specs, and nothing will be overpowering another speaker. My rule of thumb is to upgrade over time, starting first with the LCR and/or subs, then surrounds, then height speakers. Monolith by Monoprice subs are legit good subs for the price. Like this M-10 V2 👇 amzn.to/3gf6QTx

@RoguePC4U Год назад

Current pricing is crazy alright. My Onkyo TX-NR787 (only $500 on sale in 2019 ) is near identical to the NR7100 ($1300 in 2022). Same exact design and specs, save for an extra sub and HDMI 2.1. Hard to justify the price disparity for so little gain. Especially when you can work around the 120Hz gaming issue using eARC, if your TV has it. Sure, that means "only" compressed Atmos, which still sounds insane. Plus you get 120Hz, ALLM, VRR and QFT (all those fancy HDMI 2.1 specs) without buying a new receiver.

@ealanosborne Год назад

I still use my NR787 (also bought for $500 on sale in 2018) from time to time with certain tests. It was my first experience with Atmos. Gotta love Onkyo, baby!

@RoguePC4U Год назад

@@ealanosborne Cool. I suspect it's still a good receiver to get a few more years out of. And maybe by then we'll have some better pricing? lol

@ealanosborne Год назад

@@RoguePC4U Hopefully! 😭

@mptobler1 Год назад

Thanks again for a great review and explaination of features. I am really trying to stay around $1000, but I see that that is not going to happen. Pre-outs are a must so I have to decide do I want to spend $300 to $600 more. I am leaning towards the Onkyo TX-RZ50. I really wished you would have included the Onkyo TX-RZ 840 because it is a great price has pre-outs and IMAX Enhanced. How important is Dirac should it be a deal breaker.

@ealanosborne Год назад

Dirac is honestly the best room correction on the market today for general consumers. It’s amazing. Although you are correct…the RZ840 is still an incredible buy even now. It’s the predecessor to the RZ50, so it’s still a beast.

@mptobler1 Год назад

@@ealanosborne I was looking on Amazon to purchase the Onyko TX-RZ 840 for about $1100, but before I could put in my order in all 8 receivers they had in stock were sold. I was bunmmed so I took to Ebay and found an open box TX-RZ50 for $1300 I put it in my cart and a few hours later I get an offer for $1250. The Home Theater Gods have truly worked this in my favor.

@ealanosborne Год назад

@@mptobler1 Holy crap! That’s amazing! 🍾🎉

@mptobler1 Год назад

@@ealanosborne Dirac is awsome..I followed directions but would like to learn the finer aspects of the software. Do you possibly have a Dirac how to video on your "list"?

@ealanosborne Год назад

@@mptobler1 I don’t. I don’t even have a product that has Dirac, currently. But as soon as I do, I want to make a video like that!

@benmccouch3273 Год назад

Can you further describe the 2020 HDMI 2.1 bug issues? I have had issues with HDMI-CEC, where I can turn on my projector and receiver with my Roku remote, but I can only turn off the projector with the Roku remote. My Denon 4700H won't turn off with the Roku remote. Is that related to the HDMI 2.1 bug issue?

@ealanosborne Год назад

I haven’t heard of that specific type of bug, but yeah, I could see that happening as a result of an HDMI 2.1 bug. My Marantz SR7015 sometimes does this weird thing where the picture and audio will just cut out for a second, black screen, then come back on. Annoying.

@benmccouch3273 Год назад

@@ealanosborne Ugh, who likes this fancy electronic stuff anyway? 🙂 Thanks for the quick response!

@realsterg8543 Год назад

Ealan, I have a question off topic if you have time. I bought a set of four Klipsch b100 as my side surround and rear heights. My set up is in my basement with 7’ ceiling. Because of height clearance issues with walking traffic, is it ok to mount the speakers sideways for clearance? Will it effect the sound quality? Thanks in advance

@ealanosborne Год назад

Nope! As long as the tweeters are still pointed at your listening position, orienting them horizontally should still be fine! 🤘

@kiwi19866 Год назад

Av receivers are so expensive in new Zealand well everything is really need a new one with Atmos

@Habibibti Год назад

Hey Ealan. I have a question, if I were to buy the Klipsch Reference Cinema 5.1.4 Dolby Atmos, would it be fine to just use a 7 channel receiver and use the 2 atmos speakers instead of four? 9 channel receivers are quite pricey atm.

@ealanosborne Год назад

Absolutely! I recommended that in my review of the Cinema system, since I understand 9 channel AVRs are much more expensive. 👍

@Habibibti Год назад

@@ealanosborne Hey thanks for replying. Yeah I actually saw that a couple of months ago I just forgot. Thanks for reminding. Although I have a few questions left to ask if that wouldn't bother. Love your channel seriously. Helps out a lot for a newbie like me to home theatre systems. And yeah by the way, the questions are: On 7 channel receivers for the Klipsch cinema, what would you recommend here on my options? - The Onkyo TX-NR696, TX-NR5100 or Yamaha TSR-700? - If I don't want to use the built in upward firing speaker of Klipsch and want to install a separate overhead speaker, would that be possible? - Lastly, if the receiver is made for 120v, if I use a converter to 220v would it affect the audio quality being distributed? Thanks so much Ealan. Your channel helps out a lot!

@ealanosborne Год назад

@@Habibibti Hi! Thanks for your kind words! Okay… 1) I’m not an electrician, but I’m pretty sure most AVRs are equipped to handle 120V or 220V, and it shouldn’t affect your speakers’ performance. 2) You can definitely choose not to use upward firing speakers if you want. Having separate mounted height speakers pointing at you is best, compared to bouncing audio off the ceiling. 3) I would probably go with the NR696. Yes, the 5100 is newer and can handle 8K, etc, but the 696 has more power, better speaker terminals on the rear, and a couple other little features that are ultimately better. 👍

@Habibibti Год назад

@@ealanosborne thank you so much for the replies Ealan! Very much appreciated insights for my hone theatre startup this December! ❤

@tech4life884 Год назад

You forgot to mention that the ONKYO TX NR7100 has Dirac Live also.

@bimiloveu7604 Год назад

hi i have klipch 8000f 2 600m2 500sa surround2 2 hights and a center sub 2 i believe this is 7.2.2 my question is can i have a onkyo r50 without a added amp? as you may notice an new to this

@ealanosborne Год назад

It’s not 100% clear how many speakers you have, but if indeed your speaker count adds up to 9 (all speakers excluding your subs), then yes, the RZ50 can handle up to 9 speakers without the need for an external amp. It’s only when you have 11 speakers (like a 7.2.4 setup) that you’ll need an external amp. 🙌

@charlesmarchiano9531 Год назад

Great video. Question. With the Marantz Cinema 50, up mixing auro 3d, using two subs, and a center height channel the so called Voice of God channel, which pre out on the avr should I use?

@ealanosborne Год назад

If I’m reading the manual correctly, I believe it’s the Left Surround Back pre out for Voice of God, or Right Surround Back pre out for center height. 👍

@charlesmarchiano9531 Год назад

Thanks

@charlesmarchiano9531 Год назад

Ealan, After reading the manual offered by Cruthfield, for the Marantz Cinema 50,I see that I can add a center height to surround back speaker output. I was under the impression that I needed a second amp to get auro 3D. What is your thought. Am I correct?

@ealanosborne Год назад

@@charlesmarchiano9531 I think you're right, after I read the manual too! With my Marantz SR7015, you do need an external amp, since you had to use one of the subwoofer outputs for Voice of God. But I guess they've changed that! 🙌

@royalway12 Год назад

I read a Bible that was given to me free. I hear the voice of God from it, and it's led expensive.

@michaelmabry2395 Год назад

Ealan, I am trying to build a 7.2.4 system right now (I already have the speakers) with doing a 9.2.4 in the future. What AVR & what channel external amp would you recommend? I don't want to buy another AVR for at least 5-10 years. Thanks!

@ealanosborne Год назад

Your best bet is probably going to be the Denon X6700H if you’re wanting to eventually expand to 9.2.4. All the 9 channel AVRs out there that can process a total of 11 channels (x3800h, for example) don’t support 9 ear level speakers. So with the x6700h supporting 9 ear level speakers, and supporting 8K video for future proofing (and tons of other bells and whistles), I’d go that route, if you think an 8K TV is also something you’ll get in the next 5-10 years. External amps I would recommend the Emotiva BasX series. Affordable and damn good for the price. Speaking of Emotiva, if 8K isn’t your thing, and neither is Auro 3D or IMAX Enhanced, maybe consider a separates system, like the Emotiva MC1 and a couple BasX amps to power all the speakers? The MC1 is on sale for $799 right now. If you got that and a BasX A7 and A6 (to eventually Power your 9.2.4 system), that would cost less than the x6700h. Just food for thought. 🤘

@michaelmabry2395 Год назад

@ealanosborne Thanks I appreciate the feedback!

@bryanguest2807 Год назад

Sony STR-AZ7000ES

@bryanguest2807 Год назад

@@ealanosborne wtf you doing with 9 ear level channels, is your theater in a full basement

@michaeltobler649 Год назад

I have a Onkyo TX- NR696 running a 5.2.2 system with all 1st generation Bose 501 speakers and 2 Klipsch subs. I am going to upgrade to a 9 channel receiver so I can run a 5.2.4 system. My question is since all my speakers (except the subs) output highs and midrange frequencies will Dirac really help or could I get by with Audyssey. If I don’t need Audyssey I can probably save $300-$600 on my receiver, and with that saving I could buy a 2 or 3 channel amp to take the load off my front sound stage. Your opinion and insight is needed, I plan on pulling the trigger this week.

@ealanosborne Год назад

Obviously I think Dirac is the best, but I understand it’s not cheap (especially since it’s an added expense on the new Denon AVRs). Audyssey still does pretty well, but just know that you’ll need to go back into manual settings and make some tweaks after running Audyssey, since it never seems to get it 100% right. Good room correction can make even a not-so-ideal living room/listening area situation sound great, so Dirac can definitely make the most out of an imperfect space. Although the nice thing about the new Denon x3800h and 4800h is that you could save money up front by running Audyssey, then later add Dirac for superior room correction. 🤷‍♂️ Which AVR are you thinking of getting?

@michaeltobler649 Год назад

@@ealanosborne I would love to purchase the Onyko RZ50 but right now my wallet can only afford the Onyko RZ840, I get my pre outs, IMAX Enhanced, THX certification, and more power.

@ealanosborne Год назад

@@michaeltobler649 That’s not a bad compromise at all. It’s the previous version of the RZ50, so I’m pretty sure it’s just Dirac Live that’s missing, pretty much 🤘

@JS5074 Год назад

Hey Ealan, I recently purchased a crown amp that doesn’t have power triggers. Have you found a way auto power on amps?

@ealanosborne Год назад

This seems to be the only one I could find for home theater applications, although it’s 230V, so it’s only for European markets? Not sure where you are in the world… 😄 But yeah, not much you can do otherwise. 😬

@barbaroguillen8736 Год назад

Everybody always talking about how setup a dolby atmos home theater but no one ever talk about how to connect the dolby atmos speakers step by step because a can't hear no sound throuht my dolby atmos speakers

@RajanKannan11 Год назад

Hello Ealan , Between Denon X3800h & Onkyo RZ50 which one you recommend for using them 90% movies and 10% music. ?

@ealanosborne Год назад

RZ50 since it’s THX certified, and comes with Dirac Live room correction software, which is superior to Denon’s Audyssey software.

@RajanKannan11 Год назад

@@ealanosborne Thank you for your response. How does the Dual Sub work on the Onkyo RZ50 ? Is it shared signal ? 🤔 Thanks in advance . 🙏

@ealanosborne Год назад

@@RajanKannan11 I believe it is a shared signal, so they’re not independent channels. Pretty sure the Marantz models are the only ones with independent sub outputs.

@RajanKannan11 Год назад

@@ealanosborne Thank you so much for your response. 🙏

@ealanosborne Год назад

@@RajanKannan11 You’re very welcome! 😁🤘

@josejr2195 10 месяцев назад

How about an updated version for fall 2023

@ealanosborne 10 месяцев назад

That’s something I’ve been considering for this upcoming holiday season! Hope I can squeeze it in!🤘

@tamerelsamahy9006 Год назад

How are you, Ealan..which is better for rear speakers Yamaha NS-F51 or Polk SIGS10ELBK

@ealanosborne Год назад

The NS-F51 speakers are tower speakers, right? So if your home theater space has enough room, go with those. But if you’re trying to save space, go for the Polk speakers.

@tamerelsamahy9006 Год назад

@@ealanosborne Do you mean that if there is enough space for a home theater, it is better to use tower rear speakers, not rack speakers

@ealanosborne Год назад

@@tamerelsamahy9006 In my opinion, yes. Tower speakers typically have larger woofers and more power, so you’ll get a more balanced system that way. The thing about tower speakers too is that you don’t need to mount them or buy speaker stands. 👍

@FernandoOliveira-rd3ht Год назад

Seus videos são muito bem explicativos, parabéns e obrigado.

@razhua Год назад

is a 7.2.4 system the sweet spot for a living room with only one three person couch?

@ealanosborne Год назад

Correct! 🙌

@PerfectorZY Год назад

It’s a bit crazy right now with pricing. I bought the Onkyo RZ50 for 1300 and that might have included tax!

@Lowkey_nxthxn Год назад

How much power do you need to get 100 watts per channel to support other then 75 watts per channel and it's my first time getting into 9.2.

@anthonyperez_audiophile Год назад

Marantz guarantees 70% of 2 channel RMS when driving all channels. To get 100/channel you would need to go with one of the 11 channel AVRs or go with a separate power amp which will be rated all channels driven.

@miscreant1739 Год назад

Pretty much all AVRs provide the same amount of power... Keep in mind the difference between 75wpc and 150wpc is only 3dB, which roughly the equivalent of turning up the volume from 82 to 85 on a scale of 0-100. Unless your room is very large or your speakers are very insensitive you're probably worried about nothing. Also almost no one listens at reference level in a home setting because it's uncomfortable.

@nafnaf0 Год назад

@@miscreant1739 +3db is still an increase in perceived loudness by a factor of 1.23, but +3db corresponds to a doubling in power (watts).

@nafnaf0 Год назад

@@anthonyperez_audiophile The 70% rule applies to 5 channels driven

@Racer_51 Год назад

What about Dirac live on Onkyo tx7100?you didn't mention it at all!by the way it does not support 1440p !

@ealanosborne Год назад

I keep getting comments about that! I could’ve sworn I mentioned that, but I guess not. 🤦‍♂️

@Racer_51 Год назад

@@ealanosborne that's the key features of this receiver

@Audiomainia2310 Год назад

Ealan - gotta leave the 2020 models out - not worth considering unless there's 2.1 certification, which is doubtful. Dumped my 2020 Yamaha RX A6A- defective 2.1 boards, no firmware updates. The Denon A3800H - gotta wait till March 2023 for the firmware update / then you have to pay for the licences. Pass. Onkyo RZ50 still rules - everything out of the box works as stated without waiting for firmware updates. Only thing missing is an independent subwoofer output. For the price Onkyo wins hands down. And Dirac Live built in.

@arndtbc Год назад

Is the Denon x3800H overkill for a 5.1 system?

@ealanosborne Год назад

It’s not if you plan on expanding it down the road. But if it’s just for 5.1 and you’re satisfied with that configuration? Yeah, no need to have support for that many channels or spend that much money. 🤘

@nafnaf0 Год назад

One thing to think about, most people keep their AV receivers 10 to 20 years and are designed to last 30 to 40 years+

@NakeanWickliff Год назад

This is tough. These are the absolute best videos and absolute worst videos. You just read through the spec sheet from crutchfield. I guess it helps people figure out what some of those specs mean but you have to also realize spec sheets can be wrong or misleading. For example, I think ALL the Denon receivers you listed that have preamp outs have discrete subwoofer amps. No mention of how the room correction works or the fact that all of the mentioned Denon can be purchased with an app in the Microsoft store that allows you manually calibrate your speakers, time alignment, house curve, eq, etc. it’s very powerful. I’m only speaking for Denon because that’s what I have experience with. Also interesting to note that the up until 2021 (not sure about 2022) the Denon amps have measured cleaner than the Marantz, so people might want to save there money there. I’m excited Dirac is making its way into more receivers. I haven’t used it but it sounds like it’s the bees knees. Better to dive into what you know vs reading product spec sheets if you want to help inform people.

@randelldavis578 Год назад

I feel that what he's giving people is a guide to look at and you can do more research if you're interested in something. When I got my gear last year that's what I did and believe it or not, I didn't know that RU-vid even had video's to help guide you in audio/video until after I get my system. But, I can say video's like this amongst other's has helped me learn how to get the most out of what I have. Also I've seen that crutchfield does give more detailed info about the products they sale.

@MuahMan Год назад

The receivers get expensive enough at 9.2, i'm considering going with the Samsung Q990 instead of a full setup.

@ealanosborne Год назад

If I would recommend any soundbar system, it’d be the Q990B, so I’m all for it! 😁

@tech4life884 Год назад

9.2.4 is where it's at.

@PatrickNeufeld Год назад

Onkoyo TX RZ50 starts at 11:30 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hM_Ofjap0nc.html

@Chris-hr2uj Год назад

Yamaha "presence" 🤣. Ya im wishing the 3800H was around when i got my 3700H. The new software supports different height channel layouts and transducer calibration. 3700H doesnt.

@o.c.g.m9426 Год назад

This is a great series. You should do 11 & then 13 then move onto processors

@ealanosborne Год назад

Good idea!

@jimross2101 Год назад

Actually, this year I will not spring for that 9-channel receiver. Family needs to eat first.

@FURognar Год назад

Bah! 7.1.4 is last gen tech. Look at 9.1.6 now. Sony and Netflix both upgraded their dubbing studios to 9.1.6 and Shane Lee just dropped a video showing the Black Panther on Disney plus having a remixed 7.1.6 mix over the static 7.1.4 mix on the 4k blu ray.

@totalplonker824 Год назад

IMO Dolby Atmos is a little overrated. When one is listening to a 5.1 movie with the height channels on. One will actually be hearing a movie thats been mastered for 5 base level speakers and yet the same 5.1 signal will be coming out of the height channels 😲 (Messes up the whole 5-ch soundstage) it becomes even worse when listening to 2-ch decoded movie with the height channels on. It's only the fact I'm able to turn my height channels off that I was truly able to verify this! But unfortunately most people using a 7 or 9 ch internally amplified AVR won't be aware of it. If one keeps being told Dolby Atmos is the next best thing to sliced bread one really can't blame them. Conclusion; unless one has got the option to turn the height channels off, I would recommend not upgrading to Dolby Atmos and stick with 5.1. After all the vast majority content is 5.1 or smaller anyway.