2023 2024 Honda CR-V Splashguard/Mudflap Install 

Thanks for the video. Very helpful. I will add one tidbit of information for anyone not used to dealing with the "clips" (like myself) that get inserted on the bottom of each back side. Don't push the clip from the bottom piece, rather hold it exactly as the person in the video shows (fingers between what appears to be a washer and the bottom piece you eventually push up), and then once the clip is inserted in the hole, you push the bottom piece and you'll hear the click. If you do like I did and push from the very bottom piece without hearing the click, you can remove the clip, gently reopen the clip, and try again (as I had to do).

Thank you for posting this. I just used it and installed mine quite easily. I would add 2 additional tips: 1) The holes on the guards are oblong to allow up/down adjustment. Make sure you lift them up as you snug up the screws. This will allign the guard with the existing body work without having a gap. 2) If you don't have the special screw driver in the video, you can use a small vice grips with a phillips bit from a driver clamped in

Appreciate you taking the time to post this. You made it look so easy that I did it myself and saved a bundle.

Hi Paul. Thanks for this video. I watched it along with many, many others while waiting to take delivery of my 2023 CR-V Sport Touring (about two months from order date to delivery). I had originally thought I’d have the dealer install these along with the purchase of the all season floor mats and rear cargo tray but after seeing this I just ordered all of that from College Hills Honda. I think the dealer wanted like $240 for these installed and it was maybe 15 minutes to do myself for ninety bucks ( the savings practically paid for the floor mats and cargo tray which were also significantly less expensive at College Hills than my dealer). My experience with installation was exactly like yours. I first turned the steering wheel counter clockwise as it said in the instructions and found the rear screw very difficult to get to and rather than struggle with it I immediately went to the passenger side and very easily installed that side first. Great tip! I also found the bottom screws in the rear to be impossible to drive in properly with a stubbier than normal screw driver. I did not have the offset screwdriver like yours so I used a phillips head driver bit and turned it with a 1/4” box wrench which actually worked out very well (a ratchet with a 1/4” socket to turn the bit wouldn’t even fit in there). Thanks again for pointing out the pit falls so I knew exactly what to expect.

Thanks for posting, Paul! Very informational!

Another very simple install video. Looks too easy. Love it.

Thank you! Please keep these videos coming!

Those are the tiniest mudguards I've ever seen.

Thanks

Thank you So easy. Saved some $$$

Thank you 👍

Thank you!

Thank you for the video.

Thanks. I’m trying to get the “clip” on my HR-V. I’m not having luck. It just won’t snap in.

Guess I don’t see the point of using OEM ones. They’re so small how effective can they possibly be?

The back of my 2023 CR-V has only the screw and hole underneath, There are no other screws or holes in the wheel well.?????????

Just a heads up it looks like the mudflaps link takes you to the floor mats on the parts site.

Do you plan to install the Interior Illumination LED lights?

Where do you buy Splash Guard set? Give me a link website, thanks in advance

What brand of mudflap?

I see that these aren't meant to be installed with the fender flares The flares still don't offer much splash/mud protection. Any idea if these would still fit over the flares or if there is an alternative for use with the flares?

Do you have a link to the splash guards you used? Thanks

With all the black plastic wheel opening mouldings and plastic lower side panels, why even bother installing the splash guards?

How much did you bought the splash guard? And where

Hi. When installing the front mud flaps, did you find that the center tapping screws didn't screw completely tightly?

New horn install please...the stock horn is a joke 😅🥲