2023 KLR 650 Solid Mount Foot Peg Lowering Brackets From JNS Engineering

Подписаться 34 тыс.

Просмотров 13 тыс.

50% 1

Installing the much anticipated JNS Engineering Non-Dampened Foot Peg Lowing Brackets on the Gen3 Kawasaki KLR 650!
Buy Them Here:. jnsengineering.myshopify.com/...
Links to my gear & parts!
(If you click these and make a purchase on the sites I earn a small commission, which goes towards more videos like this!)
Pegs: www.amazon.com/gp/product/B00...
Motovlog Stuff
Helmet Camera: www.amazon.com/gp/product/B07...
Hero7 Mic Adapter: www.amazon.com/gp/product/B01...
Helmet Camera Mount: www.amazon.com/gp/product/B01...
360 Camera: www.amazon.com/gp/product/B08...
Insta360 Selfie Stick: www.amazon.com/gp/product/B07...
Clamps For Holding Selfie Sticks: www.amazon.com/gp/product/B07...
BT-S2 Bluetooth Communicator: www.amazon.com/gp/product/B07...
Bike Stuff
Tail Bags: www.rockymountainatvmc.com/pa...
Barkbusters: www.rockymountainatvmc.com/pa...
Tusk D-Flex: www.rockymountainatvmc.com/pa...
KLR Shift Lever: www.rockymountainatvmc.com/pa...
T7 Rear Tire: www.rockymountainatvmc.com/ti...
T7 Front Tire: www.rockymountainatvmc.com/ti...
T7 Radiator Guard:
www.rockymountainatvmc.com/pa...
Protective Gear:
Boots: www.rockymountainatvmc.com/se...
Helmet: www.rockymountainatvmc.com/ri...
Goggles: www.rockymountainatvmc.com/ri...
Gloves: www.amazon.com/gp/product/B00...
Mesh Coat: www.amazon.com/gp/product/B07...
Textile Coat: www.amazon.com/gp/product/B07...
Textile Pants: www.amazon.com/gp/product/B08...
Stay Swanky My Friends!

Авто/Мото

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@fixbuildplay5249 2 года назад

Awesome! I figured someone would quickly make a solution to that issue. It actually looks better as well. Ride safe!

@SwankyCatProductions 2 года назад

Agreed! I couldn't wait to get them!

@mikerichards3248 2 года назад

I put those brackets on my '07 KLR. I love them.

@SwankyCatProductions 2 года назад

Yeah they are worth the price for sure!

@jeffwesthof9711 2 года назад

Thanks man! Just pre ordered a set

@TwistedTriggerEnduro 2 года назад

Amazing the stock foot pegs feel so concerning. Glad you got it all sorted out 💪

@SwankyCatProductions 2 года назад

Yeah I'm not sure what the deal is with them, doesn't seem like they made anywhere near enough of a difference (at least under 50mph) to warrant the awful drooping feeling lol.

@MotoTvWoodsFarm 2 года назад

nice solution a problem looks better than the original

@SwankyCatProductions 2 года назад

Agreed!

@davidbolinger1694 Год назад

Thanks this video really helped!

@SwankyCatProductions Год назад

Glad to hear it!

@billcotton1551 2 года назад

Have a great Christmas Swanky! Footpegs look like the problem is solved.

@SwankyCatProductions 2 года назад

Thanks Bill, you too!!!

@siqizhang 2 года назад

Lots of people have problem with comfort.... Amazing. Might as well just swap in a hard fork, really gives you that connected feel to the ground you're traveling on, no? LOL

@steinthms Год назад

Swell video. What brand/model bike stand are you using?

@IslandADV 2 года назад

JNS coming in with clutch save. Such a weird way to do foot pegs. I get the vibration dampening, but there had to be another reason for Kawi to want to put those on. I'd love to know what it was.

@SwankyCatProductions 2 года назад

My guess is the number one reason they did it along with all the other rubber isolators they stick everywhere, is just to say they have them lol. They don't really help, but their there!!!

@zachz699 11 месяцев назад

Just ordered these with the tusk billet. I only wear a size 9 shoe I am 5'9 and this is my first bike, even just riding around my neighborhood as an inexperienced rider going from first to 3rd and back in hiking boots I could tell that space was tight, annoying as shit. I think this will feel much more spacious like I dont have to work to get under the shifter. I cant imagine with riding boots. Then when I do go off road here pretty soon problem already solved, thanks for the video

@SwankyCatProductions 11 месяцев назад

The billet pegs? I switched to those a while back and really like them. I couldn't believe how much bigger they were than these. Definitely worth the upgrade!

@zachz699 11 месяцев назад

@@SwankyCatProductions Yeah those are the ones, glad to hear they are sweet

@zachz699 11 месяцев назад

@@SwankyCatProductions I just went to install these and my holes were off by a considerable amount, waiting on an email back from them, the bracket hits that round thing to the left of your hand and the holes are way off

@SwankyCatProductions 11 месяцев назад

@@zachz699 hmmm, maybe you end up with the gen2 brackets somehow?

@zachz699 11 месяцев назад

@@SwankyCatProductions No they are definitely gen 3 they just don't fit lol

@nateb9326 2 года назад

Nice comparison left and right. I get it though, long distance the rubber insulators would save our toes, ankles etc. from vibration, but actual riding they're garbage by that comparo, that has to give up a ton of feel in corners and such.

@SwankyCatProductions 2 года назад

Honestly I feel like they vibrate less, at least up to 50mph (didn't go any faster than that today on a ride). I suppose 70mph 5,500 rpm might be a different story but for my purposes it'll still be well worth it!

@mantonmark 2 года назад

The first thing that comes to mind in regards to the original rubber foot pegs is that they were placed there to reduce engine vibrations on your feet. Now Im very interested in how the replacement pegs panned out. Were there a lot more noticeable vibrations with the all metal pegs????

@SwankyCatProductions 2 года назад

This could be me, this could be my boots, but honestly I feel like they vibrate less now. I don't know if the rubber was picking up the vibrations and amplifying them somehow or what. But either way they are not noticeably worse and definitely worth the upgrade!

@rogerhenson6589 2 года назад

Waiting for your test ride with new foot pegs 👍Did they improve the turn signal switch on Gen 3.

@SwankyCatProductions 2 года назад

Just rode with them today, could be the cold but honestly I totally forgot about them until the end of the ride lol. Unless there a big difference between 50mph and 70mph (only hot 50 today) than I almost want to say they vibrate less than with the stock pegs and brackets... Could just be me but it's definitely not annoying or noticably worse at any of the speeds or rpms I hit on my hour ride today.

@rogerhenson6589 2 года назад

@@SwankyCatProductions THANKS FOR THE REPLY 🏍💨

@randolphmullinofsky4761 Год назад

Hello. Would you mind telling the hardware kit you bought for the lowering brackets? Thanks for all the videos! Maybe just use the factory mounting bolts again?

@SwankyCatProductions Год назад

The brackets came with the bolts if I recall correctly. I think they're just a little longer than the stock ones.

@Vineartfully 2 года назад

Does making modifications to the levers and pegs void the manufacturer warranty? I've heard swapping the doohickey can mess up warranty stuff but those mods seem external. Really enjoying vids about the klr 650. =]

@SwankyCatProductions 2 года назад

I'd think pegs and and peg mounts would be warranty friendly yeah. Anything internal or that would effect the way the bike operates could cause warranty issues but anything esthetic or comfort related should be pretty safe.

@veloroadpig1 Год назад

I tried these out and have not written them off yet . Solid mounts are great idea but I think these are a little too low for me. They kind of put my knees at the bottom seam of the tank which to me is slightly uncomfortable because I really squeeze the tank. Not saying it's a bad product may not be for everybody.

@eshamblazer 3 месяца назад

Do any foot pegs fit on that lowing bracket?

@michaelcharest1869 Год назад

Is this what they used on the new s model to make more room for your boot

@SwankyCatProductions Год назад

Huh, no idea.

@doublex632 2 года назад

But how are the vibes going down the highway? thanks Big Fan

@SwankyCatProductions 2 года назад

Haven't been on the highway with them yet. But up too and including 50mph I didn't notice anything at all. Honestly I forgot I installed them until I was on my way back home!

@richcastellano2330 8 часов назад

What brand and where did you get your extended shifter for the 22 660 klr. Thank you

@SwankyCatProductions 6 часов назад

Here's an affiliate link for it (meaning if you click it and make a purchase, I get a small commission). It's made by Tusk and really worked well for me! KLR Shift Lever: www.rockymountainatvmc.com/parts/tusk-folding-shift-lever-p/?ref=1042&

@Thehorsemanorg 2 года назад

How is everyone handling the spring on rear brake light switch not being long enough after dropping your rear brake pedal lower to work with the lower pegs? My switch can’t adjust any lower and my brake light stays on the whole time.

@SwankyCatProductions 2 года назад

You could pull the spring down a bit more but mine adjusted down perfectly?

@rileymartin1902 Год назад

Just had this problem! I fixed it by just extending the springs length by adding in a washer that goes between the spring hook and the hook on the actual pedal. It just hooks in in line.

@leoluy5571 Год назад

Hola, porfavor me puedes dejar el link del vendedor?

@jason.couture7177 Год назад

Ok. So I did this very mod today. Ran into an issue once I adjusted the brake lever. Once done te brake light stays on. Not sure what to do. I realy like the JNS but fear i may have to go back to stock. Thoughts anyone?

@SwankyCatProductions Год назад

That's actually adjustable too. It's a bit of a pain and you might have to mess with the spring a bit to make it work but it's possible. Mine seems to get a little sticky but I do ride a lot of nasty wet terrain.

@jason.couture7177 Год назад

Ben you forgot to mention if you used loctite on those bolts. I'm guessing you did?

@SwankyCatProductions Год назад

Yep I put it in everything!

@jason.couture7177 Год назад

@@SwankyCatProductions I figured as much. Thanks dude

@leroyjenkins4123 Год назад

Swanky where'd you get these pegs? Thanks

@SwankyCatProductions Год назад

The pegs were just some of the cheap ones of Amazon or eBay. I've got some Tusk pegs with springs now that I like much better. They are larger, grip better and are slightly angled up so you feel more level when your weight is on them. Video about them will be out this Saturday.

@leroyjenkins4123 Год назад

@@SwankyCatProductions 👍preciate you swanks

@2talltimadventures 2 года назад

is there a discount code?

@SwankyCatProductions 2 года назад

I believe all preorders will be disconnected, no code required unless stated on the website.

@2talltimadventures 2 года назад

@@SwankyCatProductions okay thank you

@SwankyCatProductions 2 года назад

@@2talltimadventures if not let me know and I'll talk to my contact there!

@2talltimadventures 2 года назад

I placed an order but it was only $10 off not the 20% you stated.

@leoluy5571 Год назад

Hello, can you leave me the link of the seller?

@SwankyCatProductions Год назад

jnsengineering.myshopify.com/products/2022-klr650-footpeg-lowering-brackets

@crockett11000 2 года назад

After owning 2 of them.. I liked it ok..And did many 400 mile in a day rides, but It's a Not 80/20!! Meaning 80% on road/ 20% off road. It's really a 90/10!!. And Don't ever take in into raw pure sand! Period! your Your right It's a cool looking.. But a fricking Army tank..Take it frm a 50 year enduro racer from Mich.

@SwankyCatProductions 2 года назад

The gen3 actually does pretty well in the sand! Check this ride out from a few weeks ago. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-31xiWYSt4Zk.html