240z Gets Custom Built Floor Pans, Firewall, And Trunk! 

This has come a long way from a few questionable rails lined out on the floor.

Before you paint it you should drill out and put a washer over all your grounds, keep yourself from having to ruin any paint to make all the grounds

Don't use the Raptor liner under any paintwork. It takes a long time to "off-gas" and will crinkle the paint something fierce. MotionAuto TV used a similar bedliner product under the paint of his supra mirrors and they peeled right away and he had to strip everything off and start again. Awesome progress BTW!

If you get a copper block and get behind those welds you can weld the holes closed on those spots you welded the patch panel to. The copper block will not stick to the wire weld from the mig welder. It works great for filling holes in thin metal.

i see other peoples videos on their cars like 'putting new floor mats in' or 'installing new wheels' , then there's these guys that almost complete an entire interior in one video... good work guys!

5 years later and I’m now doing my floor pans came back to get tips . Happy to see the boys still be together to this day 👌

I must say I was very sceptical about this to start with but now I cannot wait to see it painted and complete. Amazing work and video content.

Incredible progress, this project is really coming together. So glad you took the time to do the floor boards.

really wasn't sure any series could beat the lotus rebuild but this series has been hitting all the right spots

Car went from looking 30% complete to straight 90%!! Took a big jump forward with concealing everything. Good job guys!!

yall deserve a vacation after this build

I still remember all the haters saying this wasn’t going to work

A hard coupla days work.... but that sill / quarter panel repair.... you got to re do it...just cut till you hit clean metal..even if it means making that whole sill section, it wont take long, and the payoff will be worth it. Even with fibreglass over it it will bubble up in no time...be a heartbreaker then... Well done, keep it up...

Holy shit guys, this was an action packed episode, truly incredible and a real inspiration, keep it up.

2:11 so Erick’s hole isn’t big enough huh? 😂

Oh, man. I work in theatre. Sometimes you have a huge job and a certain amount of time to finish it. Sometimes it's too close to call. You work all hours, tipping away at the list, hoping you'll be finished on time. The stress is never completely overwhelming, but it's there every hour you work. A lot of creative decisions. I feel the exact stress watching these videos. God love you. It will work out, but I know exactly how knackered you feel right now. But it will be magnificent when it's done. Keep on trucking on, brother!

The steering wheel has a clockspring in it and if the steering wheel was turned more than 360degrees it may have been damaged and also if the steering wheel wasn’t put back to dead center 180/180, the steering wheel will throw some codes when you plug it back in.

I really enjoy the timelapses. If you every need too make a timelapse due time reasons don't worry too much about it, just do IT!

That front shot of the car right after you started it up was awesome! Just seeing the fan spinning and hearing the car running is a look and sound of accomplishment. Well done so far!

Shame there was no rust proofing on the now welded over chassis

I may be totally wrong but I feel like it almost adds a cheap feel by not filling in hopes with welds. I just hate body filler for covering holes.

This has to be the single most amount of work done in a single day... episode! Holy fawk! Keep up the pace guys, your getting close to the home stretch!

I've been waiting for this episode to see it with a floor. It makes it look much more complete.

Yo dude you thought about wrapping that exhaust up to stop heat coming through the floor??

Chris, you're a lucky guy to have such talented and hard-working friends... all well deserved, I'm sure.

Having a fan designed as a "puller" fan as a "pusher" fan won't help with cooling! Fan shroud/fan blades and motor are all designed to pull air through the rad!

This channel will explode. Super stoked for you Chris

Why no bead rolling the long flat floor panels?

Can't wait to see the final product! It's gonna be badass

150% you need to dyno this car, not cut corners on the paint job and eventually put a full length belly pan on it. i really really really hope the entire frame and structural work is properly aligned so this thing just rips. this HAS to work. so stoked for you my dude

That was an epic time-lapse! PLEASE do more like that, you get more accomplished, and we get to see it done.

Eric’s a GOD lol . Great teamwork, glad to see this going exactly how you planned 🙏🏼

This thing is really starting to come together. Not trying to take away from what you are doing but eric is quite an asset to your channel and your builds, youre lucky to have him! Keep living the dream brother

i get goosebumps watching these episodes where major things get finished

The grind was real AF in this episode... jeez. I feel like I need a break.😂 Awesome work so far, can't wait to see the finished product.

15:20 Why is the camera footage tearing up like that ?? Just thought I would bring it to your attention if you didn't notice. Loving the final bits of this series coming together man!!

To be honest, at the beginning I wasn't sold on the project, but it really grew on me because of the high quality of work. It even exceeds the Evora as a signature build.

Starting to look less like a bird nest of wires and more like a sema build👍

This is the first video of the series that I've 'liked' so far. I've enjoyed them all, though! As much as I like the explanations of why you're doing what - these time lapse videos of just lots of stuff getting done are really cool!

I'm glad Eric is there to push for a higher quality build.

Absolutely killing it! You dudes are putting in work! It is very cool to have Oscar and Eric in the shop, yall make a great team!

The state of a shop is a good indicator of the build quality

Oh this project has grabbed my attention almost as much as the Aston.... Almost lol. I love the Aston

I'm so impressed with how this build is coming along, I've been watching the channel for a long while but this build I thought was a step too far.... Wow I was wrong! Props to you, absolutely well done to all of you for getting her to this point 👌🏻👏🏻

Amazing build. RESPECT!!

Fiberglass doesnt make a watertight seal with the metal so moisture will still get in.

Guys what you're doing with this build is incredible! A real inspiration, great work

So hooked on this project. Been here since the beginning, as always good stuff Chris!

Probably one of my favorite b is for build episodes right here

Good luck, guys! You are kicking ass and I, for one, am loving this build!

You guys deserve a Nobel peace prize for wiring that thing without killing each other

By far the best ep thus far!!! Can’t wait to see the finished product!!!

Just catching up from the past week, SUPER EXCITED FOR YOU GUYS! YOU'RE GOING TO MAKE IT!

B for build is by far the best car video platform at youtube. he really does it by himself not like TJ who pays people and stike with the honour

The overhead view and time lapse welding was cool! Great work guys. 🤙

Excellent episode. Loved the extremely long time lapse. Really cool seeing this thing come together.

KEEP THAT HUSTLE UP!!!!!!!!!!!!!!!!! This car will be a show stopper, but, more importantly, it will be a trophy of what you and the guys can do. Massive props to everyone involved.

Hey man, I’ve been following the gtr and the hurican builds and this is my first time watching the Z start to finish. I really appreciate you taking the time to film all of this stuff and put it online for us to enjoy. I love all of the detail and the hangups you include in the videos. Super inspiring.

I look forward to these episodes everyday. Keep up the great work! I can't wait to see it finished.

So glad to see floors in! Loving this build

This is the video I've been waiting for couldnt wait to see the pans and boot welded in! Love yoir work and keep it up mate👊

Love the progress guys. Keep it going.

Such a work of art! Keep up the good work boys! Can’t wait to see the final assembly!

M240Z...it could be a drug name but it's just the best project car on RU-vid! It won't be perfect,but so close to the best you can do in a private garage! Keep going, buddy!

Awesome work guys!

Good work guys. Having the floor done will make a massive difference. Looks better already.

WOW, you guys got a lot of work done! Hats off to the three of you

Chris BAby im halfweay through the timelapse brother. THIS SHIT ROCKS! I love watching y'all chugg through that fab work. You are the real one.

This is so awesome! You guys are killing it!

Great job all, this will be so awesome when it's done! Keep it up y'all !

One of my favorite episodes you've made Chris. Seeing the floorpan come together was awesome.

Eric is ALWAYS complaining about his "hole" not being big enough! Lol 😂 awesome video as always Chris!

Great progress guys.

Awesome work. It takes a heap of motivation at times for builds like these. Looking forward to watching this progress.

stunning work well done to all the team so far; the amount of work done each time is really impressive.

Looks amazing, good job guys!

Fairplay a lot of hard work gone into that car. Can't wait until it finished. Can we get some off road fun with this after SEMA? 😜 You guys deserve it

This is such a good episode!! Im so excited for this car to be complete man!! Good work

Greatest, & most productive video yet!!! Keep up the great work Chris!!

That's a colossal amount of work for one day. Great job, you guys!

Damn dudes, that some solid progress. Nice work!

I love all of the metal work. Keep up the original content!

Well Done! It's come a long way, props to you and the team that's got this beast this far. Going to be rad when finished.

This is amazing dude

You guys are killing it. My favourite build ♡

been watching this build since the beginning, awesome progress, really hope he goes all out in making this car sick. like show car quality not just a track car.

Looking awesome! Keep up the awesome work!

great looking real good, good work cant wait to see this thing complete keep it going !!!

This video was amazing and I’m amazed you got so much done in this video. Well done with the floor, it look really cool.

This looks amazing great progress!

It’s so dope seeing it all come together.

Awesome episode with some great progress. Keep it up Chris and Co!

Really lov'n the longer episodes Chris! Car is looking AMAZING!

Best car build channel! I’ve been watching for a while and your content just keeps getting better! Great job on everything.

Wow that's a lot of work that just got done, this is badass.

Sorry would have responded sooner but actually watched the video. Love the transformation. It is looking so good.

This was the best episode so far in my opinion. Keep it up like this!

This build is coming together so nicely

I enjoyed this episode so much, great work man!

I think this is the biggest and most challenging build on you tube. But you get it done everyday witch is awesome.