30,000 Mile MotoFab Leveling Kit Review!!! 

We have the same vision for our trucks! Stock look but a little level would finish it! Thank you for the update! Same precautions and standards that I was looking for!!

I'm not usually a fan of the non-Z71 front grilles on this body style but your setup is so clean I'm honestly reconsidering how I feel about them. Keep up the videos man you're giving me ideas for my own truck build.

Just received my 2.5 motofab leveling kit from the front and now I want to do the rear also for the fact I love a bigger rear end

I’m only 15 but as soon as I buy my first truck I plan on doing all this mods to it, love your vids man their so informational and make me wanna do everything you’ve done to my future one! Keep up the work man

We have a 2017 gmc Z71 double cab. 4x4. It has 265 70R17 tires on aftermarket rims. They sit flush with the fenders. I spent days looking for a leveling kit then came across the motofab. We had the 3” kit that came with 3” block in the front with 2” block in the rear with the upper control arms. Honestly after everything is said and done, you need to replace the upper control arm bolts. Our truck was aligned with zero rubbing. I noticed the truck is more responsive. For some reasons the upper control arms are a weak design. Besides the upper control arms make it pop.

I agree about the rake for sure. Putting a little bit of weight in the back of the truck and having it sag isn’t the way it supposed to be unless you’re going for that look.

Glad your doing well. Stay safe bro.

Love it

I have the same set up. I’ve done a lot of the same mods as you bud.

I like factory rake too I love having my rear end high in the air while my front is on the ground

I have the same setup on my 2020 Z71 LT & Love it. But as of now unfortunately MotoFab does not make the upper replacement control arm for the 2020. Hopefully soon.

Iv got cst 5.5 lift running 35s FTW 🙌

What's your thought on putting rear traction bars after leveling? Figured it would help with any axle roll the block might be creating, and the bars looks pretty cool. Lmk! I just bought a 2018 silverado 1500 with 30k miles

Maybe dumb question but you did remove the stock blocks before adding your 2 in blcks

Hey John you say you put 2.5 in the front and 2 inch block in the rear

So there is no problem running this set up with the Motofab UCA's with the stock wheels? I have the same truck and think this is the perfect set up for me. It would be a deal breaker though if I couldn't run the stock wheels.

When you say you have a 2in lift block for rear is that a total of 2in or really like a 3.25 because i hear the stock is 1.25in just asking bc im looking to order rear block when pulling my boat without a sag

I have the same setup except I got rough country UCA’s. I have a small diff drop spacer kit too, would you recommend putting the diff drop in or do you think it would cause more problems than it’s worth? Thanks!

My 18 is only RWD should I stay with the 2.5 with the uca or go 3” ? It’s currently stock, it’s my daily driver I drive city and highway, trying to get as much information as possible.

Did you notice any difference in the ride quality? I just got a 18 and thinking to install this kit thank you

Did you have to put wheel spacers on the front due to the control arms rubbing?

Off subject but howd you black out the gap between the windows?

Think I could run 22s with 35s? With this kit or 33s perfered??

did you rub any with the aftermarket wheels?

Could yiu please tell me the over all high of truck once done both level front and rear of truck ?

I know this truck is sold but I have the same Motofab level in my 2018 Z71. The UCAs are great, but I have 20x10s for a summer setup. I’ll be going back to my stock 18s for winter. Did you have to run a wheel spacer or anything to clear the control arm with the factory 18s?

What you think a 1" block in back and 2.5" in front" Keep it pretty level but might keep ass end up

Out of 10 how hard was the installation for the front great vid too

Say I get the 2.5 leveling kit plus the motofab UCA’s would stock tires or a 275 rub on the arms?

Did they come greased up ready for install

So if I get a 3.5 front leveling kit for 09 Silverado I will definitely need upper control arms? Front and back wheel wells are 3.5 inches apart

I had a question on your thoughts on 20" wheels and bigger tires. I was going to buy some 20x9 with a 33" wheel now having second thoughts after reading the cons of going bigger on a truck that came with 18" stock wheels and tires. I dont mind the loss of a couple mpg but a few little things liken the truck not accelerating like it use and possible having to regear the truck. I just read a few things that might impact the truck by going bigger. Was curious on your thoughts Thanks again!

hey brother i have a question i just bought the 2.5” level lift kit and im putting them on a 2018 silverado. Do you think i need UCAs or are my stock ones fine? Truck only has 80k miles right now.

I'm curious.... If I get a 3 inch lift I would need to upgrade my upper control arms? If so would there be any major problems moving forward?

Is the 2inch rear lift a 3' block taking the factory 1" out to achieve 2" total??

Any issues with the new UCA’s rubbing on the tires? I have a 2” leveling kit and getting overwhelmed with all the differing reviews of all the different UCA manufacturers out there

I thought about purchasing the blocks but went with bilstein right height adjustable struts instead and a 2 inch shackle drops in the rear.

Did the motofab upper control arms rub on the black rhinos?

Please Help!! I had a 3 inch strut spacer installed yesterday but when I got home I saw that the cv boot was leaking a lot of grease and you can't see where it came from, could you recommend something?

At 5:34 it looks like your ball joint is already bad.

When are you trading it for a f250

Did you ever have vibration issues whith this kit? I just installed it in my 2021 Sierra. I'm getting vibrations at low speed, and when breaking. And the rear wheels jump over bumps at the store, as the shock now is more extended, so the suspension is getting to the maximum travel wth very little bumps. I got them from American Trucks, it seems they don't want to take responsibility of the product they are selling, they sent me to talk to the manufacturer. Worst cuatomer service ever, they should take care of the whole process.

Beautiful truck and about the gas mileage change?

I did the 2.5" level kit as well from motofab. But I chose to go air ride in the back and I love it, being able to adjust the rear to the load. Took off my 18x10 wheels and 285/65 toyo tires because they rode incredibly stiff, they would eject me out of my seat almost, going over bumps lol. So I'm back on stock wheel and tires. Got 31k miles on my truck

I have a 2016 silverado 1500 with the 2.5" Motofab leveling kit also. I have a popping noise when I turn the steering wheel. Does anyone know what might be causing the noise?

The music is way to gansta for a white truck...