300ex Dg exhaust putting on and sound 

Adds a lot of fun to the experience

You’ll love it. Best quad I’ve had.

@@Garrett_James I’m also buying nerf bars and bumper and few other mods

No, but I’d recommend

You’ll love it

I got a 97 300ex not sure what exhaust to get

I went with this Dg at the time cause it was the most inexpensive, got it for $185 shipped off of eBay but it’s been several years since. Fmf, hmf and big gun slip ons were the other more prominent options. I ended up getting my hands on a 250x I put an HMF pipe on it (pretty similar to 300ex as you may know; revs a little higher and has a shorter stroke), I have two videos of it on my channel. It sounded just about the same. It’s all subjective and they’re all going to sound similar in my opinion.

@@Garrett_James I went with a Curtis sparks full exhaust was about 600$

carlos Fontanez www.denniskirk.com/rox-speed-fx/black-dash-panel-dp-402.p599290.prd/599290.sku?gclid=Cj0KCQiAxNnfBRDwARIsAJlH29CtzX6nuBl-gjaUK6Z9S85UeY_uwfPQWUk-5-wVXWGKgesVSG7zjjkaAr6ZEALw_wcB&ad=228601179045

FREAK EVO the slack in the chain should be able to be free to move a half inch to an inch up and down, your sprocket may be a problem if it continues to bother you after you lube it

Garrett James thanks just put some chain lube on the engine sproket and it stopped the squeeking. Appreciate it. And the chain tightens like it should when i sit on it. Happy riding!

FREAK EVO thanks and you’re welcome. Don’t take any chances with your chain, you know how to adjust the tension right?

Yes but I will pay the $40 dollars to have it done by the pros. If I can ill take a pic or video and show you the amount of slack. I dont think its more than a half of a inch ill have to measure it. Its not hitting the chain guard. I just took it through the trails and noticed after I got off that maybe it got lose. I had not checked it as the owner before me put a new chain on it.

www.denniskirk.com/rox-speed-fx/black-dash-panel-dp-402.p599290.prd/599290.sku?gclid=Cj0KCQiAxNnfBRDwARIsAJlH29CtzX6nuBl-gjaUK6Z9S85UeY_uwfPQWUk-5-wVXWGKgesVSG7zjjkaAr6ZEALw_wcB&ad=228601179045

Trx250x 89 maybe a little pricey but to me it was worth it, you won’t regret it

@@Garrett_James 50 not to bad

I jetted the carb, along with a k&n air filter.

This one was a 1997, had quite a bit of customization to it, making it look a little newer.

rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192919587715

Billy Mitt 30 I’m afraid I cannot get you a pipe... here’s an eBay listing for a full system that might help, and from the same seller I bought the slip on from.

I did. I also had a k&n 350x air filter. Can’t remember what I jetted it to but the main was 135.