300hp N/A M52 project. Part8, first start 

It's always pleasant to finally see a video from Pazi!

englannin puhuminen parantunut huomattavasti! hyvä homma ja mahtavaa että saa hyvää kontenttia taas. kiitos!

Thank you for speaking english. I watched your videos with subtitles before, because my finnish is not existing. Much apprechiated

Superb results! You are a legend.

🎉 hardly wait to see the results!

Honey wake up, pazi88 posted new video

You should've kept the stock exhaust for now. Would be interesting to see how much to gain from new exhaust. Thanks. Looking forward to next video.

i see pazi, i click like already.

I was waiting for this for ever!!!

intrested in the cams, where to look out for the production run ?

Great content and channel, love the build, appreciate you speaking in English aswell 👍

You are blowing my mind. For a turbo setup on my s52 am I better off following you down the 45.1 ecu path or does the speeduino board make more sense. Was looking at VEMS but this is much more fun.

Moi Pazi, where did you get MS45 definiton file for Romraider ? Would be possible to share with me ?

How much base circle can you take out of the cams before it is an issue? I don’t see you playing around with lash caps or anything?

hey pazzi, i want to ask you a question about the cylinder head of the m52tu/m54 what do you think about porting the exhaust ports on the head to match them to the size of the exhaust manifold because they are smaller and could choke the engine on higher rpms?

So why did you switch the pulley size on the alternator?

Congratulations! 🎉 Why stock ECU and no use speeduino or kdfi? ❤

@ 20:23 Pitäiskö olla huolissaan kun omassa e46 330i M54B30 autossa menee tuosta polttoainesuodattimen alipaine nipasta letku imusarjan nippaan? Tuntuu ainakin toimivan toistaiseksi, mutta se ei siis ole käytössä ms43 autossa?

you can use fuel rail from m52b28tu, it has fuel regulator, is wat i run in my m54b30

next episode soon? ;D

Mullaki Lexus hybridissä 14:1 puristukset onko sekin siis racing ready?

16.49 that beat tho 😅

Blokkaa kyllä kovasti ilmavirtausta lauhduttimen edessä tuo fööni. Eihän siinä pitää ilmastointia vaan päällä

What do these 10.9, 12.9 numbers mean?

Kuulostaa siltä että olet vaihtanut nokka-akselin :)

Muistakko ku joskus lähetin sulle winols checksumeja, pientä sääntöä sekin 😂

Tiiätkö mistä voisi johtua että kun lämpinänä starttaa autoa, niin välillä jää vajailla käymään ennen kun polkaisee kaasua, ja sitten käy ihan normaalisti? Muuten auto käy tosi hyvin. Ei anna mitään vikakoodeja. Kyseessä e39 m54b30 moottorilla.

Melko seppä oot😅💪🏻

Yooooo pazi how the fuck did u time the engine without the timing tool broooo tell me, there is no guide without tool online anywhere!!!!

If I remember correctly drift guys put audi 3.0v6tdi pulley on bmw powersteering pump, because its way bigger, for drifting when bashing limiter and doing a lot lock to lock turning it also overheats. It prelongens the life span of pump. Only drawback is that pulley is big enough so power steering is a bit heavier on idle, but same on little throttle. You will not be idling on 700 anyway with high comp.

RU-vidmassit tullut selkeästi maksuun kun Kelohonka lattiamatto on siirretty talliin remonttimatoksi :D

Most awaited video for the past few months😄

a 6 to 1 , sequential fire runner would make it sound really crazy

Bravo, Waiting for so long. Hope you can get it up to 300hp, Pazi.

Nice! good to see it runing. Mine 36 sudenly started runing like shit few days ago, cyl.6 4bar compresion. x) So i´m gona pull head off first time in my life lol, hopefully i dont brake it even more :D Nice video!

I've been waiting for this video over a year!! Finally its here :) I want to build a similar engine on my channel as well, this gives me a lot of motivation :)

Keep us posted on those cams!

¡Ay caramba! in Finnish.

Is there any advantage of using MS45 instead of MS43?

Miten menny kanava ohi ihan kokonaa, tilasin.

Any link to thoes cams? Or where to find them? 272 and 256 that sounds like the metric mechanic regrinds they make from u.s. S52 cams

m52 what,,b28 or a stroker m52b30 ??

Where can I get a set of them camshafts from?

nice from you to show how things are done, including part numbers and software stuff, like it!

0:33 still waiting for that "Tervetuloa Sipa parkkihalli".. i guess its not coming 😁

Yes my favorite finnish auto chanel! I havent caught a video in ages.

i wish you could do this for a living. id watch every video

awsome bro! great job

Great video as always, and thanks for the subtitles! Thanks from Spain!

Why is there a need to set afr? Can this parameter be used to quickly switch fueling from gas to e85 for example?

Nightmare...!

Just curious. Did you torque down the cam caps

Hey, arleady I have e60 ms45. Can i Connect the ms45.1 dme without change the wiring harness. I know there is a diffrent between lambda sensors. Maybe i can just modyfity the lambda connection plug ?

I see X201 I click like!

Looking forward to the next one!

Cams where not changed in the calibration? Especially for the schricks that needs to be done. Ms45.1 calculates VE on the fly based on intake model and with dofferent cams you change that significantly.

very well done.

🔥

Out of curiosity, why ms45 over ms43? Such an awesome car mate!

Very nice man! Keep it up!

What hardware do you use to flash/read/write ECU?

bigger pulleys in engine its very good option , but maybe better use a bigger pulley in water pump and power steering ? , "more power" on engine and no problem with cavitation fluids and power steering oil dont overheat when you go high rpm . i searching bigger pulleys to power steering and also water pump , or you can use electric power steering , alternator 150 a from other bmw intake manifold from m50 ( b20 its fine trust me ;)) and use a bigger throttle body p&p form other bmw

Deecent!

Can you reprogram e34 m50b20nv ecu?

Mega Work ❤

my man, does bmw has any engine that is reliable? thinking about buying one but always got disappointed after a quick search about the engine of the model tried to buy.

Forgive me if i'm out of my lane here, but i believe that changing the stoichiometric AFR was a mistake. Since MS45.1 reads Lambda with no real interpretation to AFR you just made it target Lambda 0.67, thus making it run really rich in the clip with the good airmass meter. Instead compensate for E85 in your ron98, idle and cold start fuel maps and leave the stoich value at the stock 14.7 for MS to target Lambda 1.

Nättiä!

👍

Ai saakeli kun öljy tieteilijät näkis tuon motoxilla voitelun :)

what gas will you run with such CR?. im guessing 98? nvm.. u said E85 but i wanna know if u have flex sensor in case there's no E85 available

Why not run speeduino?

Great video!