4 Link Plot and Chassis Square with Final Four Corner Weights for BlownSBC 53 Studebaker Big Tire

Подписаться 28 тыс.

Просмотров 6 тыс.

50% 1

4 Link Plot and Chassis Square with Final Four Corner Weights for BlownSBC 53 Studebaker Big Tire! This video will cover the Chassis Square String Method, 4 Link Plot and Four corner weights for drag racing with the #blownSBC #53Studebaker #Bigtires drag car! This is the baseline drag racing suspension setup for our testing at the dragstrip1
Subscribe to this channel: www.youtube.co...
Samson Performance of Sam's Alignment in North Charleston, SC:
Get with us at our shop to let us help you scale your car and do a complete plot of your car as it is today and then we can discuss what changes, if any, we would recommend. We do drag car chassis tuning, chassis setup and ensure the suspension is setup for the best drag racing launches possible!
We also offer online remote services from our website here below, including this full in-shop suspension baseline service:
samsonperforma...
Facebook:
/ kevinwilsonsbc
Instagram:
/ kevinwilsonsbc
Chassis Square String Method Video:
• Drag Racing Chassis Sq...
Jerry Wittig at Penske Racing Shocks:
610-375-6180
Nitrogen Shock Digital Pressure Gauge:
amzn.to/3oyXfXI
Anti Squat line and Instant Center and 4 Link Angles:
• 4 Link Bar Angles | 4 ...
Finding Center of Gravity Height:
bit.ly/2Y2IikU
Original Shock and Coilover Videos:
• Double Adjustable Shoc...
• Double Adjustable Shoc...
• Coilover Springs | Spr...
#suspension #dragracing #noprep #streetrace #samsonperformance #kevinwilsonsbc #smalltire #bigtires #chassistuning #4link #studebaker

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@AustinBoil 2 года назад

I've heard the statement so many times "I don't need that many holes, i'll never use them". This is a perfect example of what Kevin has run into, it just limits your setup options multifold. As he stated, moving a bar one hole makes a huge move & often you just can't get an optimum setup. Kevin, I agree, I'd like to see that bottom bar lower as well as the rear of the top bar.closer to the rear end housing. I'm not afraid of a bigger spread but again with your brackets it's all hypothetical until you plug the numbers into the 4 link program. I also like to have bottom adjustable shock mounts on the brackets so you can move ride height but keep the shock in the right position for travel. Great job on the video, sorry you lost a bunch of footage in the process, frustrating I'm sure. A friend of mine who is an NHRA certified rear end builder makes brackets that have all those features plus a unique setup that allows moving the rear of the bottom bar in small increments. If you want his info, either E-mail me. Mike

@KevinWilsonSBC 2 года назад

Thanks so much, Austin! I will be in touch with you. Go fast, go straight! Be SAFE!

@jaredshoemaker9196 2 года назад

Thanks so very much for sharing this type of information. It is greatly appreciated. Love the way you explain everything makes it a lot easier for me to understand, and the confidence to do it myself. Again, thank you so very much. Take care, be safe, and have fun regardless.

@aaronwood9523 2 года назад

Man thank for the videos So much helpful info. Im building a 1/10 scale rc no prep car.

@twistedkidmotorsports9093 2 года назад

I’m going to take the time and watch your videos over and over again great job

@KevinWilsonSBC 2 года назад

Awesome! Thank you! Go fast, go straight! Be SAFE!

@mikecondoluci53 2 года назад

HI KEVIN THANKS FOR A GREAT VIDEO

@bahrace 2 года назад

Awesome. Great information.

@tylerhi3150 2 года назад

From what I have learned from you, antisquat real close to where it will do the job. Thanks again for all the info!

@timrayburn2461 2 года назад

Outstanding job

@KevinWilsonSBC 2 года назад

Thanks Tim! Go fast, go straight! Be SAFE!

@rustyhook8637 2 года назад

Pure gold knowledge, appreciate ya Kevin! Can you add a link to your vinyl stickers in the description? Thanx!

@KevinWilsonSBC 2 года назад

Sure thing! The link is www.samsonperformance.com/store/p9/donate3.html Go fast, go straight! Be SAFE!

@mikeclift3598 2 года назад

Great job Kevin!!!! This information really helps me, I just bought my first 4-link car.

@KevinWilsonSBC 2 года назад

Glad it helped! Go fast, go straight! Be SAFE!

@BearFulmer 2 года назад

Thanks for the great information, I got a 65 Impala wagon I'm using to further my chassis knowledge. On the scales 4200lbs with me in it, 50/50 left to right and 54% rear. I just said that cause I scaled it. Gonna build some adjustable upper control arms and try to get it to hook.

@boostwillis3906 2 года назад

Great info as always! Keep it coming.

@KevinWilsonSBC 2 года назад

Thanks! Will do! Go fast, go straight! Be SAFE!

@Go4BrokeOffroad 2 года назад

I just cut some low prep brackets out on the table. Curious to see they help the old ranger.

@megatoad1 2 года назад

Kevin, I followed a lot of your advice on my S10 4-link. We have won two races in the last two weeks. Sunday I went 17 rounds in competition. Pretty flawless but couple things cropped when the track sat longer between rounds. It spun, not as bad as the other guys, but it sort of "felt like I was going over humps in the rear". I was thinking shock settings? Currently I am on 9 (QA1 dbl adj) on Extension and 6 on Rebound (compression). I like the "hit" but it feels like it is then bouncing back when the track loosens up a bit, maybe stiffen the Rebound to keep shock in extension longer? Or loosen extension to let it hit harder? Also, scaled the truck and it is : LF 867 RF 781 LR 612 RR 694 Left 50.1% CR 47.2% Rear 44.2% 2954 weight This is with three flats pre-load on top right bar and two turns longer on the anti-roll bar. Look OK to you. Keep up the good work, I think I have sent your link to about 15 of my racing buddies. Jok

@puunersjabski6487 2 года назад

I would drill a new hole in the bottom chassis 4 ink bracket. Then notch it you can lengthen your bottom bar.

@phillip-cl8bk 20 дней назад

i notice the wishbone was mounted differently then iv ever saw, does it still keep the diff centered?

@FadetoBlack1463 2 года назад

How does the rear end 4 link spread effect the car? Nice video!

@KevinWilsonSBC 2 года назад

A bigger spread hits the slick harder for the initial bite. Good question. Go fast, go straight! Be SAFE!

@FadetoBlack1463 2 года назад

@@KevinWilsonSBC Thanks Kevin

@richpawlak8557 2 года назад

I would like a video on you wood blocks you use to support the car. What type of wood and how you made them. Thanks. Also finally broke down and bought the south side machine pro series upper A arms upper ball joints and lower ball joints and lower bushings for the grand national for my true street no prep fun. I do street drive the car. What kind of alignment should I put in it. It does have skinneys up front thanks

@KevinWilsonSBC 2 года назад

Wood is just treated 2" x 4" from local lumber supply. I can try to capture the dimensions soon, but they are 10.75" tall. The blocks that hold the scales are recessed down the scales just sit below 10.75" when I roll the car on the scales. For front end checkout this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-G8CGguZWpb4.html

@richpawlak8557 2 года назад

@@KevinWilsonSBC thanks. I need to make a set for pinion angle

@dwilson2548 2 года назад

Wow I damn near s*** my pants when I looked at your name.. and I had to do a double take as I had a brother named Kevin only this last December 2021 he was found dead in Santa Cruz California.... Well Kevin I sure hope you're doing a lot better than my brother stay safe. 🤤

@jefflosli9165 Год назад

Torsion bar front suspension setup 67 b body dodge

@joestegin962 2 года назад

Dld you buy the studebaker from kenny @ carol long

@KevinWilsonSBC 2 года назад

Yes. That is it. Wish I knew more about the history of it. Go fast, go straight! Be SAFE!

@sanger440 2 года назад

My prediction: your going to crush your sidewalls too much with that much torque from a blower motor. You will need to move your IC forward of the CG point to calm it down. But I am just putting this out there because you asked us too, not trying to be a smart ass or anything.

@KevinWilsonSBC 2 года назад

You may be right... I hope I don't have to run the instant center that long but you may be right for sure. We will be testing soon so it is getting real now!!! Go fast, go straight! Be SAFE!

@RiversideRacecraft 2 года назад

Big wheelies with no bars.

@KevinWilsonSBC 2 года назад

I definitely have bars, but curious why think it will have big wheelies with no bars. Not saying you're wrong, just want to follow your line of thought on it. Go fast, go straight! Be SAFE!

@RiversideRacecraft 2 года назад

@@KevinWilsonSBC seems like an aggressive low angle, I would think it would be prone to try to roll the front end upward. I’m newish to big tire stuff and still have a lot to learn for sure.

@RiversideRacecraft 2 года назад

To me it looks like it would have a lot of front side bite and run out of bite down track?