I own an original 2000 PC2 mapped for the Muzzy ful TI exhaust. The change is pretty dramatic .over 4 grand the power is increased markedly and the tire raises easy in 2nd gear. That’s the best way to describe it other than savage , loud, mean and do not twist to hard or you may regret it.
I have a gen2 that I have managed to take 22kg out of (it still looks stock to the untrained eye) highly recommend lighter wheels (I have zx1000 wheels which only needed a few spacers machined on the gen2). Huge difference. Loved your vid mate, keep it up
Really really good video actually (I'm only half way through). I bought in a gen1 aluminum subframe (I am in New Zealand) and welded on new standoffs to fit the gen2 plastics. This saved me 2.78kg and it's obviously up quite high.
Yes mate, getting rid of that heavy steel subframe is the go for sure! Interesting about the zx1000 wheels. I got the more common R1 wheel conversion. Great to hear of your mods.
@@KJmotoplus the zx wheels were much easier (and cheaper) as they use the factory axles. I saved 580 grams off the front wheel. Did you compare the r1 wheel?
If the gen1 is anything like the gen2 there are lots of small changes you can make to lose weight, and most of them cost very little. Add me to Facebook If you have it.
Great walk though, thanks! My 05 Gen 1 needs some TLC. Seeing what you have done has inspired me to pull my finger out. It's a great machine and still puts a big smile on my face everyday that I use it.
Nothing but a few improvements to fix a few weak points, like the front brakes are poor compared to today's standards but our gen1's can still get along just fine ☺
Thanks mate. As you know, the busa's are a great platform to modify. One thing that helped alot for both the track and country back roads, was sorting out the suspension with springs and valves. The country roads we have here are fast but in places rough and properly working suspension really helped with the control and comfort at speed even though from the outside the forks and rear shock look standard. But it does need new paint from all the stone chips....
@@BT_life2 I don't know where you live but in Perth we do have a road racing circuit so there are mechanical workshops who can do this work. The trick is who. The gen1 is limited in aftermarket valves but RaceTech do make them and a local dyno and suspension shop in my city knew what to do, actually, he is very good. Getting the correct front springs was the first thing for me because the standard springs are to soft. Can you go to your local race track and ask some racers? We have two mechanics here that have done work for me and they are awesome. You could also just ring a national distributor because they have trained and authorised workshops around the country ( I did that first ).
Yes mate, same here. Any revs over 4k would have the clutch shuddering at the drags. Actually, even with a Brock's Utra Lite centre hub that bike still shuddered badly until I found the problem which was a wore out clutch basket at the shock springs backing plate.
Just acquired a 00 model . Was admiring all your work. Saw the switch for mapping. That could be done much better considering the quality of the rest of the bike . Overall excellent work
Congratulations on the purchase of the 00. A member of the Hayabusa club is super knowledgeable on the Woolich Racing ecu stuff fitted and flashed the ecu for me and then the bike was tuned on a dyno and while fitting the electric's Mark said, hey, I'll throw a switch in here so we can play with maps in the future if you go for E85, but I never did.
Well done Kevin, I had no idea you are an enthusiast. I don’t have the foggiest idea about motor bikes but certainly enjoyed your narration of the upgrades and your joy👍happy travels
Thanks 👍 Actually, the narration was nerve-racking! Even though I've done every mod myself I couldn't get the words out! Hopefully I'll get better with more videos, thank you.
Loved the video, best channel I’ve seen for us who prefer handling upgrades!! And I’m definitely doing as much as I just learned that I can afford to!😂 💪🏽💯
If you have a gen2 you won’t need as much as my gen1 as the front forks are better and so are the front brakes but they are a bit heavy. I’m working on a new video right now about the 10 track days I did with some tips for you. Thanks.
Thank you so much. I appreciate any original bike but unfortunately mine was accident damaged when I bought it so it would have been expensive to put back to original so I just changed things as I went.
Nice Gen 1 mods , great hearing what you have done to your Busa's . I got my Gen 2 ECU tuned with woolich , making good power and torque , and running 18t / 47t BST wheels .
@@KJmotoplus I dont track it , so full respect to you . I am still in love with my Busa tho , and have fitted a DME aluminum subframe , 3.9KG TI pipe , ti engine mount and axles etc . Cheers
Hi your video was very informative and worth watching I have two gen 1 Busa’s with a lot of different mods your brake clutch and suspension mods are great you didn’t show what you use for steering damper unless your bike doesn’t need one
Hi, the steering damper is just the stock unit (situated just above the bottom triple clamp. It's ok but one day i would like to replace it with the Dutch made HyperPro but still in the same location. See you in the next one... :)
Awesome Kevin《☆》Nice mods👍🛎I cut 8" off my Yoshimura CF muffler. It sounds much better & a bit lighter. I'm thinking about LED headlight for my 02 Busa. Cheers from Florida Brother🖖😎☮
Thank you! That Titanium Yoshi muffler on my silver busa was originally on my GSXR . It had some slight damage so I cut / trimmed it approx 2inchs to get rid of the damage. And it made the bike look a bit better too I thought by not hanging past the rear wheel. I tried a small hi-low projector headlight which totally repaleced the standard headlight assembly to save some weight as the stock unit is so heavy. But it wasn't very legal. So for the time being the stock headlight is back in. The weight is from that darn hi beam as it's solid glass for the projector. I was thinking of an LED bulb for the low beam and a small LED assembly for a high beam.
Hi you can try a little thicker oil in the stock steering damper it will be a little stiff when standing still, you will enjoy that piston kit I went with 84 mm which yields 1397 cc you should port and polish the head 395/378 cams are a good all around cams with heavy duty springs and stock retainers
Thanks mate for the info, especially about the cams that you found worked well. I have two gen1 busa's with three cam options, (so far). The silver gen1 has stock cams and on a dyno peak power was at 9400rpm and then falls away. So they have to go....The second gen1, the black one, had the two inlet cams mod done and it's power was up 4 whp but the power didn't significantly drop off to the rev limit of 10800rpm which was really good but... as a camshaft company explained to me on the phone, that swap is only just ok because not all of the cam lobes ride (sit ) central on top of the valves. Being slightly off centre prevents the cam from spinning when reved.....so, I've removed them and bought a pair of gen2 cams instead. But not fitted yet and thus, I'll need to get another set of something else. So your tip of cam choice is greatly appreciated!
Great video and interesting to see what you’ve done so far. You won’t be disappointed with the 1441cc conversion, I’m running it and it makes the Busa an absolute weapon on the road and motorway!! I’ve thought of carbon bodywork, is it much of a weight saving if you do all the panels, nose cone etc?
Glad to hear your 1441 conversion has been a complete success! The silver busa's engine is getting a bit tired now and would benefit an upgrade.....The carbon parts are definitely lighter and it all adds up, little by little. But at this stage I cannot afford nose and side panels.
I’d like to get some help with my busa.when I bought it she was setup for quarter mile drags.I ride her around now off drag strip but when I hit 3800-4500 rpm and just cruise she feels like she’s sluggish. I’ve put a light everything new I can think of on her any ideas
I just asked the truck & bus diesel mechanic at work. Straight up he said, turbo is too big (for street use). I think it would be well worth the time to find out exactly what you have in regards to what turbo you have and go from there. Good luck.
Hi I would be careful with the gen 2 cams on the gen one engine your cam lobe might be off center the gen two intake cam on the gen 1 exhaust side with a 385 megacycle cam on the intake is great for road racing from looking at your back tire provided the gen 2 cam lobes line up if not what worked for me is 378/330 will give you great low end out of the turns
Great info! I bet the Gen3 owners are wondering if they should change their cams too. Seems the Gen3 is a little like the Gen1 in the way the power is all finished at 10,000 while the engine can rev out to 11,000 (or a bit higher) Which means there is more power to be made with some better top end cams . But anyway, thanks :)
I had the opportunity to grab an OEM 1999 hayabusa and a 2000 ZX12R with only a full muzzy exhaust. I opted for only the ZX12R. But now kicking myself I should’ve bought both. 😢
Hi, I'm not a big fan of the stock gen1 busa obviously because I keep changing mine but I understand what your saying. There must be quite a few sitting in garages gathering dust I reckon.
Originally the Gen 1 had an exhaust cam that was identical to the intake ....... that put the bike at near 200 hp ...... after 99 it was "detuned" with a milder cam ..........
My lowered gen1 with the carbon fibre tail piece (in the video) has the two inlet cam mod done with APE adjustabe cam gear. My ecu's are flashed and dyno tuned, all factory restrictions removed, top speed, ignition maps in the gears, (just as a 99).
As you know Dave, that took weeks, actually two months. This is verson number three. Huge learning curve with the Rode wireless, lighting, editing and content. Waiting for your next road trip vid, part 3 i think.
Lovely video mate, and really helpful! Al tough i have one problem with the brakes of my 2001 Busa. Did you buy your gsxr k3 brakes used or brand new? I'm not sure if its worth it to put on used brakes, but i cant find any new brakes online!? Could you give me some advise please? These Busa's are a lot of fun but the maintenance is another story haha.😆
Hi, the biggest problem with the gen1 is the Master Cylinder. On that silver gen1 of mine I have the Brembo 19RCS Brake Master Cylinder kit. The lowered gen1 I have has the Nissin 19mm radial master cylinder. The Brembo is better. You can buy brand new 108mm (mounting pitch) calipers from Webike Japan. Look up Nissin Advantage Brake calipers in their website....or, get in touch with MHP UK. mhproducts.co.uk for their caliper adapters and calipers. I'm sure they can steer you right. I hope that helps mate....I need to make another video just on Gen1 brakes, such a big topic. ☺ ☺
@@KJmotoplus Ahhh thank you very much for your answer, this will help for sure!!! I'm sure i am not the only one with this problem haha so this will help a lot of people!
@@KJmotoplus I do have one more question. Are the GSXR K3 Tokico Brakes you mention on the video new or used and rebuilt? I found out that my brakes have leaks so they can't build up any pressure. The Nissin brakes are a little too expensive for me so i might try to get the same GSXR Brakes you have. Or do you have another solution?? Thanks again!
@@seraneramphal1790 First, if you have a leak the fluid level in the reservior will drop and you will see the fluid on the ground. I don't think you have a caliper leaking problem. It's either air in the system or the master cylinder (at the handle bar) needs an overhaul kit. Or both. Do you have a Suzuki shop nearby? The overhaul kit for the gen1 is available to buy from Suzuki. It's not much money.
Thanks for sharing. Saw your like on our post so thought we would check your channel out. Pottsy always looking for a next investment. This one will be hard to hide from him lol. Great video. Fantastic to connect with a fellow Aussie content creator. New sub 👍🏼
Hi guys and thank you! I'm originally from Sydney so I like to see my old stomping ground's from your videos. I'm making a new video right now and as usual, I'm not happy with it....such a steep learning curve ☺
hello, again do you know where can i get new foot controls including the pegs, the previous owner of my busa got some horrendous things on there and the rubber parts are all cracked
A popular mod is to lower the foot pegs. The Buell XB lowered peg is a slimline design (which is very important) and reduces the bend angle at your knee's just that little bit which can make a big difference. The Hayabusa makes light work of touring.
Hi, this silver gen1 busa is down about 10hp to a pretty much standard gen2 but is lighter in weight. At the local drag strip, when it was lowered, it's best was a 9.66
@@KJmotoplus it would make a great video to do some rolls ons w a gen 2 if you ever get a chance so people can see how much a difference the weight and power differences make.
Hi! I have the Soupy's Performance Suzuki GSX1300R Adustable Raising/Lowering Links Kit +1 to -1.........So that means I have raised the back of the bike a maximum of 1 inch for quicker turning. Works really good. Quick Shifters are a must. 😂
@@johngarza7622 One of the reasons why I bought the Brembo RCS19 is it now comes with a micro switch so you now have the same as the stock mc setup. No inline pressure switch to activate the rear stop light required. Much better.
Yes, on this silver busa the Shifting ConTrol Sensor (or a genuine Power Commander sensor) goes directly to the quick shifter ports on the side of the PCV. I also have on my other bikes, the Cordona Quickshifter and the Translogic Quickshifter. The Translogic QSXi on my GSXR is the best one of those three.
Hi, for my gen1 busa's which are 1299cc standard I need the gen2 crank, gen2 rods and gen2 +3mm oversize pistons. I guy with a gen2 busa (1340cc) needs +3mm oversize pistons for a capacity of 1441cc but using a bored gen1 block/barrel is better for longevity.
Hi Brian, I was dreading someone would ask that! The top triple clamp was one of the first things I bought, years ago. I tried to buy another set years later and couldn't find them at all. The name was PitTech and I got it through Ebay but now it's disappeared. It's been excellent because it saved weight BUT the only problem is, because of the larger holes for the fork legs to slide up through has moved the position of the bars slightly forward. Only slightly but enough to cause clearance problems withe the Brembo master cylinder. For my other gen1 busa looking for another straight top clamp with the normal road racing style clip-on handle bars. Changing handle bars and top clamp is a mission.
I purchased some raised woodcraft clipon mounts but they place the bars further forward than even your aftermarket yoke :-( it was a total fail and a waste of money. HOWEVER woodcraft do a set of raised clipons which mount the bars in line with the tubes. These would be ideal. My goal to to ditch the entire top yoke assembly and just keep the lower one (with the bush holes in it)
Hahaha, hey young fella, from Motocomposites.com Very good stuff. Also front guards from Magical Racing and TAGA….. Look out for a new video this weekend :-)
@@Mr.A.J.1 I’ve had great service from Schnitz Racing, Motocomposites, WeBike jp……and others. Just depends, sometimes I buy things that are good quality but I should have spent more. For example, I have raised foot pegs but I really need the full Rearsets now.
I did the airbox mod with heatshield wrap on whole intake. Also racetech gold valves f/r & Gen2 rear shock, as it's 10mm longer. I like the pirelli's better than battleax, for my riding. Looks like you've got some cold tearing on the rear. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V0sPSzMkjG4.html
Thanks for the info mate, very interesting. Yes, I've found the RaceTech gold valves to be excellent. Interesting about the gen2 shock. The Soupy's rear links in this silver busa are -25 / 0 / +25mm So far the bike is raised 20mm at the rear. I'll step up to a Pirelli Supercorsa for the next set of tyres. Just haven't decided on which ones yet.
Hi, I'm not sure at what point in the videos are you referring to but, Ive had a very noisy Bosch fuel pump in there and I replaced it before it failed. The fuel pump is a submersible type so it can't be dry but blocked filters can make them sound loud. Dirty fuel, mainly contaminated with water has done damage in the past but all good right now.
Hi, that back cut gear set in the box are from my other gen1 busa. The dogs on 2nd gear were worn and it was jumping out of gear. So I got all the gears back cut but still original ratio.
mai aisa footrest kabhi nahi dalwaunga apne busa mai , coz mai khaali paw (without shoes) me bhi kabhi kabhi nikal jata hoon , i know it's strange , for yours thinking, butt humare yaha superbikes common hai , aur hum Logo ka business mai Time ki bohot ahimiyat hai , Style ki nahi ,
I didn't tallying the parts but can I say this, some thing's are a must do for me. I have the Yoshi full system on the silver gen1, a Brock's Alien Head on the black gen1 and now a full M4 system for the gsxr1000k6. The M4 system is worth a look as it's quality and at a very good price. A dyno tune is then a must using say the Woolich software for changing fuel, ignition, removal of restrictions on the dyno to get any benefits from the new exhaust. The Brembo RCS19 at just under $500 made a big difference. The rest can be just preference for the type of riding you do but in the case of my silver gen1, the suspension was shit and about $1000 it now rides just great. Hope that helps mate.